@@ -76,6 +76,16 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(EM28XX_VERSION);
+
+#define EM25XX_FRMDATAHDR_BYTE1 0x02
+#define EM25XX_FRMDATAHDR_BYTE2_STILL_IMAGE 0x20
+#define EM25XX_FRMDATAHDR_BYTE2_FRAME_END 0x02
+#define EM25XX_FRMDATAHDR_BYTE2_FRAME_ID 0x01
+#define EM25XX_FRMDATAHDR_BYTE2_MASK (EM25XX_FRMDATAHDR_BYTE2_STILL_IMAGE | \
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_END | \
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_ID)
+
+
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
static unsigned int radio_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
@@ -408,6 +418,62 @@ static inline void process_frame_data_em28xx(struct em28xx *dev,
em28xx_copy_video(dev, buf, data_pkt, data_len);
}
+/*
+ * Process data packet according to the em25xx/em276x/7x/8x frame data format
+ */
+static inline void process_frame_data_em25xx(struct em28xx *dev,
+ unsigned char *data_pkt,
+ unsigned int data_len)
+{
+ struct em28xx_buffer *buf = dev->usb_ctl.vid_buf;
+ struct em28xx_dmaqueue *dmaq = &dev->vidq;
+ bool frame_end = 0;
+
+ /* Check for header */
+ /* NOTE: at least with bulk transfers, only the first packet
+ * has a header and has always set the FRAME_END bit */
+ if (data_len >= 2) { /* em25xx header is only 2 bytes long */
+ if ((data_pkt[0] == EM25XX_FRMDATAHDR_BYTE1) &&
+ ((data_pkt[1] & ~EM25XX_FRMDATAHDR_BYTE2_MASK) == 0x00)) {
+ dev->top_field = !(data_pkt[1] &
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_ID);
+ frame_end = data_pkt[1] &
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_END;
+ data_pkt += 2;
+ data_len -= 2;
+ }
+
+ /* Finish field and prepare next (BULK only) */
+ if (dev->analog_xfer_bulk && frame_end) {
+ buf = finish_field_prepare_next(dev, buf, dmaq);
+ dev->usb_ctl.vid_buf = buf;
+ }
+ /* NOTE: in ISOC mode when a new frame starts and buf==NULL,
+ * we COULD already prepare a buffer here to avoid skipping the
+ * first frame.
+ */
+ }
+
+ /* Copy data */
+ if (buf != NULL && data_len > 0)
+ em28xx_copy_video(dev, buf, data_pkt, data_len);
+
+ /* Finish frame (ISOC only) => avoids lag of 1 frame */
+ if (!dev->analog_xfer_bulk && frame_end) {
+ buf = finish_field_prepare_next(dev, buf, dmaq);
+ dev->usb_ctl.vid_buf = buf;
+ }
+
+ /* NOTE: Tested with USB bulk transfers only !
+ * The wording in the datasheet suggests that isoc might work different.
+ * The current code assumes that with isoc transfers each packet has a
+ * header like with the other em28xx devices.
+ */
+ /* NOTE: Support for interlaced mode is pure theory. It has not been
+ * tested and it is unknown if these devices actually support it. */
+ /* NOTE: No VBI support yet (these chips likely do not support VBI). */
+}
+
/* Processes and copies the URB data content (video and VBI data) */
static inline int em28xx_urb_data_copy(struct em28xx *dev, struct urb *urb)
{
@@ -460,7 +526,11 @@ static inline int em28xx_urb_data_copy(struct em28xx *dev, struct urb *urb)
continue;
}
- process_frame_data_em28xx(dev, usb_data_pkt, usb_data_len);
+ if (dev->is_em25xx)
+ process_frame_data_em25xx(dev, usb_data_pkt, usb_data_len);
+ else
+ process_frame_data_em28xx(dev, usb_data_pkt, usb_data_len);
+
}
return 1;
}
The em25xx/em276x/em277x/em278x frame data format is different to the one used by the em2710/em2750/em28xx chips. With the recent cleanups and reorganization of the frame data processing code it can be easily extended to support these devices. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> --- drivers/media/usb/em28xx/em28xx-video.c | 72 ++++++++++++++++++++++++++++++- 1 Datei geändert, 71 Zeilen hinzugefügt(+), 1 Zeile entfernt(-)