| Message ID | 1362570838-4737-13-git-send-email-shaik.ameer@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/06/2013 12:53 PM, Shaik Ameer Basha wrote: > Signed-off-by: Shaik Ameer Basha<shaik.ameer@samsung.com> > --- > arch/arm/boot/dts/exynos5250-smdk5250.dts | 43 ++++++++++++++++++++++++++++- > 1 file changed, 42 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts > index 4b10744..7fbc236 100644 > --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts > +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts > @@ -85,9 +85,26 @@ > }; > > i2c@12CA0000 { > - status = "disabled"; > + samsung,i2c-sda-delay =<100>; > + samsung,i2c-max-bus-freq =<100000>; > pinctrl-0 =<&i2c4_bus>; > pinctrl-names = "default"; > + > + m5mols@1f { > + compatible = "fujitsu,m-5mols"; > + reg =<0x1F>; > + gpios =<&gpx3 3 0xf>,<&gpx1 2 1>; > + clock-frequency =<24000000>; > + pinctrl-0 =<&cam_port_a_clk_active>; > + pinctrl-names = "default"; Ah, so it's that way... I don't think that is correct. What you're doing here is assigning an SoC clock output pin pinctrl node to pinctrl property of an image sensor device that is external to an SoC. Why don't you put this pinctrl properties in the common "camera" node ? > + > + port { > + m5mols_ep: endpoint { > + remote-endpoint =<&csis0_ep>; > + }; > + }; > + > + }; > }; > > i2c@12CB0000 { > @@ -214,4 +231,28 @@ > samsung,mfc-r =<0x43000000 0x800000>; > samsung,mfc-l =<0x51000000 0x800000>; > }; > + > + camera { > + compatible = "samsung,exynos5-fimc", "simple-bus"; Shouldn't it be "samsung,exynos5-is" (Imaging Subsystem), or something more relevant to exynos5 ? Or what would be reasons to use "fimc" for exynos5 ? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 4b10744..7fbc236 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -85,9 +85,26 @@ }; i2c@12CA0000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; pinctrl-0 = <&i2c4_bus>; pinctrl-names = "default"; + + m5mols@1f { + compatible = "fujitsu,m-5mols"; + reg = <0x1F>; + gpios = <&gpx3 3 0xf>, <&gpx1 2 1>; + clock-frequency = <24000000>; + pinctrl-0 = <&cam_port_a_clk_active>; + pinctrl-names = "default"; + + port { + m5mols_ep: endpoint { + remote-endpoint = <&csis0_ep>; + }; + }; + + }; }; i2c@12CB0000 { @@ -214,4 +231,28 @@ samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; }; + + camera { + compatible = "samsung,exynos5-fimc", "simple-bus"; + status = "okay"; + + csis_0: csis@13C20000 { + status = "okay"; + clock-frequency = <166000000>; + #address-cells = <1>; + #size-cells = <0>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&m5mols_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + samsung,csis-wclk; + }; + }; + }; + + }; };
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 43 ++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)