| Message ID | 1364798210-31517-1-git-send-email-prabhakar.csengg@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 1 April 2013 12:06, Prabhakar lad <prabhakar.csengg@gmail.com> wrote: > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > > Add pm_runtime support to the TI Davinci VPIF driver. > > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> > Cc: Mauro Carvalho Chehab <mchehab@redhat.com> > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Sakari Ailus <sakari.ailus@iki.fi> > Cc: Sekhar Nori <nsekhar@ti.com> > --- > Changes for v2: > 1: Removed use of clk API as pointed by Laurent and Sekhar. > > drivers/media/platform/davinci/vpif.c | 24 +++++++----------------- > 1 files changed, 7 insertions(+), 17 deletions(-) > > diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c > index 28638a8..599cabb 100644 > --- a/drivers/media/platform/davinci/vpif.c > +++ b/drivers/media/platform/davinci/vpif.c > @@ -23,8 +23,8 @@ > #include <linux/spinlock.h> > #include <linux/kernel.h> > #include <linux/io.h> > -#include <linux/clk.h> > #include <linux/err.h> > +#include <linux/pm_runtime.h> > #include <linux/v4l2-dv-timings.h> > > #include <mach/hardware.h> > @@ -44,7 +44,6 @@ static struct resource *res; > spinlock_t vpif_lock; > > void __iomem *vpif_base; > -struct clk *vpif_clk; > > /** > * ch_params: video standard configuration parameters for vpif > @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev) > goto fail; > } > > - vpif_clk = clk_get(&pdev->dev, "vpif"); > - if (IS_ERR(vpif_clk)) { > - status = PTR_ERR(vpif_clk); > - goto clk_fail; > - } > - clk_prepare_enable(vpif_clk); > + pm_runtime_enable(&pdev->dev); > + pm_runtime_resume(&pdev->dev); > + > + pm_runtime_get(&pdev->dev); I don't see runtime-pm ops being registered. Can you explain how clock prepare/unprepare is taken care by runtime-pm? > > spin_lock_init(&vpif_lock); > dev_info(&pdev->dev, "vpif probe success\n"); > return 0; > > -clk_fail: > - iounmap(vpif_base); > fail: > release_mem_region(res->start, res_len); > return status; > @@ -459,11 +454,6 @@ fail: > > static int vpif_remove(struct platform_device *pdev) > { > - if (vpif_clk) { > - clk_disable_unprepare(vpif_clk); > - clk_put(vpif_clk); > - } > - > iounmap(vpif_base); > release_mem_region(res->start, res_len); > return 0; > @@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev) > #ifdef CONFIG_PM > static int vpif_suspend(struct device *dev) > { > - clk_disable_unprepare(vpif_clk); > + pm_runtime_put(dev); > return 0; > } > > static int vpif_resume(struct device *dev) > { > - clk_prepare_enable(vpif_clk); > + pm_runtime_get(dev); > return 0; > } > > -- > 1.7.4.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
On Mon, Apr 1, 2013 at 12:47 PM, Rajagopal Venkat <rajagopal.venkat@linaro.org> wrote: > On 1 April 2013 12:06, Prabhakar lad <prabhakar.csengg@gmail.com> wrote: >> From: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> >> Add pm_runtime support to the TI Davinci VPIF driver. >> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> >> Cc: Hans Verkuil <hans.verkuil@cisco.com> >> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> Cc: Sakari Ailus <sakari.ailus@iki.fi> >> Cc: Sekhar Nori <nsekhar@ti.com> >> --- >> Changes for v2: >> 1: Removed use of clk API as pointed by Laurent and Sekhar. >> >> drivers/media/platform/davinci/vpif.c | 24 +++++++----------------- >> 1 files changed, 7 insertions(+), 17 deletions(-) >> >> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c >> index 28638a8..599cabb 100644 >> --- a/drivers/media/platform/davinci/vpif.c >> +++ b/drivers/media/platform/davinci/vpif.c >> @@ -23,8 +23,8 @@ >> #include <linux/spinlock.h> >> #include <linux/kernel.h> >> #include <linux/io.h> >> -#include <linux/clk.h> >> #include <linux/err.h> >> +#include <linux/pm_runtime.h> >> #include <linux/v4l2-dv-timings.h> >> >> #include <mach/hardware.h> >> @@ -44,7 +44,6 @@ static struct resource *res; >> spinlock_t vpif_lock; >> >> void __iomem *vpif_base; >> -struct clk *vpif_clk; >> >> /** >> * ch_params: video standard configuration parameters for vpif >> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev) >> goto fail; >> } >> >> - vpif_clk = clk_get(&pdev->dev, "vpif"); >> - if (IS_ERR(vpif_clk)) { >> - status = PTR_ERR(vpif_clk); >> - goto clk_fail; >> - } >> - clk_prepare_enable(vpif_clk); >> + pm_runtime_enable(&pdev->dev); >> + pm_runtime_resume(&pdev->dev); >> + >> + pm_runtime_get(&pdev->dev); > > I don't see runtime-pm ops being registered. Can you explain how clock > prepare/unprepare is taken care by runtime-pm? > The pm_runtime API handles the clock management for you. For Davinci platform runtime PM support for clock management has been added (You can find it in arch/arm/mach-davinci/pm_domain.c) When runtime PM is enabled, the davinci runtime PM implementation will use the pm_clk layer to enable/disable clocks on demand. For more/detailed understanding you can go through the pm_runtime framework. Regards, --Prabhakar -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 1 April 2013 13:53, Prabhakar Lad <prabhakar.csengg@gmail.com> wrote: > On Mon, Apr 1, 2013 at 12:47 PM, Rajagopal Venkat > <rajagopal.venkat@linaro.org> wrote: >> On 1 April 2013 12:06, Prabhakar lad <prabhakar.csengg@gmail.com> wrote: >>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com> >>> >>> Add pm_runtime support to the TI Davinci VPIF driver. >>> >>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> >>> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> >>> Cc: Hans Verkuil <hans.verkuil@cisco.com> >>> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >>> Cc: Sakari Ailus <sakari.ailus@iki.fi> >>> Cc: Sekhar Nori <nsekhar@ti.com> >>> --- >>> Changes for v2: >>> 1: Removed use of clk API as pointed by Laurent and Sekhar. >>> >>> drivers/media/platform/davinci/vpif.c | 24 +++++++----------------- >>> 1 files changed, 7 insertions(+), 17 deletions(-) >>> >>> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c >>> index 28638a8..599cabb 100644 >>> --- a/drivers/media/platform/davinci/vpif.c >>> +++ b/drivers/media/platform/davinci/vpif.c >>> @@ -23,8 +23,8 @@ >>> #include <linux/spinlock.h> >>> #include <linux/kernel.h> >>> #include <linux/io.h> >>> -#include <linux/clk.h> >>> #include <linux/err.h> >>> +#include <linux/pm_runtime.h> >>> #include <linux/v4l2-dv-timings.h> >>> >>> #include <mach/hardware.h> >>> @@ -44,7 +44,6 @@ static struct resource *res; >>> spinlock_t vpif_lock; >>> >>> void __iomem *vpif_base; >>> -struct clk *vpif_clk; >>> >>> /** >>> * ch_params: video standard configuration parameters for vpif >>> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev) >>> goto fail; >>> } >>> >>> - vpif_clk = clk_get(&pdev->dev, "vpif"); >>> - if (IS_ERR(vpif_clk)) { >>> - status = PTR_ERR(vpif_clk); >>> - goto clk_fail; >>> - } >>> - clk_prepare_enable(vpif_clk); >>> + pm_runtime_enable(&pdev->dev); >>> + pm_runtime_resume(&pdev->dev); >>> + >>> + pm_runtime_get(&pdev->dev); >> >> I don't see runtime-pm ops being registered. Can you explain how clock >> prepare/unprepare is taken care by runtime-pm? >> > The pm_runtime API handles the clock management for you. > For Davinci platform runtime PM support for clock management has > been added (You can find it in arch/arm/mach-davinci/pm_domain.c) > When runtime PM is enabled, the davinci runtime PM implementation will > use the pm_clk layer to enable/disable clocks on demand. I see. Thanks for the explanation. > > For more/detailed understanding you can go through the pm_runtime framework. > > Regards, > --Prabhakar
On Mon 1 April 2013 08:36:50 Prabhakar lad wrote: > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > > Add pm_runtime support to the TI Davinci VPIF driver. > > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> > Cc: Mauro Carvalho Chehab <mchehab@redhat.com> > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Sakari Ailus <sakari.ailus@iki.fi> > Cc: Sekhar Nori <nsekhar@ti.com> > --- > Changes for v2: > 1: Removed use of clk API as pointed by Laurent and Sekhar. > > drivers/media/platform/davinci/vpif.c | 24 +++++++----------------- > 1 files changed, 7 insertions(+), 17 deletions(-) > > diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c > index 28638a8..599cabb 100644 > --- a/drivers/media/platform/davinci/vpif.c > +++ b/drivers/media/platform/davinci/vpif.c > @@ -23,8 +23,8 @@ > #include <linux/spinlock.h> > #include <linux/kernel.h> > #include <linux/io.h> > -#include <linux/clk.h> > #include <linux/err.h> > +#include <linux/pm_runtime.h> > #include <linux/v4l2-dv-timings.h> > > #include <mach/hardware.h> > @@ -44,7 +44,6 @@ static struct resource *res; > spinlock_t vpif_lock; > > void __iomem *vpif_base; > -struct clk *vpif_clk; > > /** > * ch_params: video standard configuration parameters for vpif > @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev) > goto fail; > } > > - vpif_clk = clk_get(&pdev->dev, "vpif"); > - if (IS_ERR(vpif_clk)) { > - status = PTR_ERR(vpif_clk); > - goto clk_fail; > - } > - clk_prepare_enable(vpif_clk); > + pm_runtime_enable(&pdev->dev); > + pm_runtime_resume(&pdev->dev); > + > + pm_runtime_get(&pdev->dev); pm_runtime_get() calls pm_runtime_resume() if needed, so is the call to resume() really necessary? Regards, Hans > > spin_lock_init(&vpif_lock); > dev_info(&pdev->dev, "vpif probe success\n"); > return 0; > > -clk_fail: > - iounmap(vpif_base); > fail: > release_mem_region(res->start, res_len); > return status; > @@ -459,11 +454,6 @@ fail: > > static int vpif_remove(struct platform_device *pdev) > { > - if (vpif_clk) { > - clk_disable_unprepare(vpif_clk); > - clk_put(vpif_clk); > - } > - > iounmap(vpif_base); > release_mem_region(res->start, res_len); > return 0; > @@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev) > #ifdef CONFIG_PM > static int vpif_suspend(struct device *dev) > { > - clk_disable_unprepare(vpif_clk); > + pm_runtime_put(dev); > return 0; > } > > static int vpif_resume(struct device *dev) > { > - clk_prepare_enable(vpif_clk); > + pm_runtime_get(dev); > return 0; > } > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Hans, On Tue, Apr 2, 2013 at 2:17 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote: > On Mon 1 April 2013 08:36:50 Prabhakar lad wrote: >> From: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> >> Add pm_runtime support to the TI Davinci VPIF driver. >> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> >> Cc: Hans Verkuil <hans.verkuil@cisco.com> >> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> Cc: Sakari Ailus <sakari.ailus@iki.fi> >> Cc: Sekhar Nori <nsekhar@ti.com> >> --- >> Changes for v2: >> 1: Removed use of clk API as pointed by Laurent and Sekhar. >> >> drivers/media/platform/davinci/vpif.c | 24 +++++++----------------- >> 1 files changed, 7 insertions(+), 17 deletions(-) >> >> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c >> index 28638a8..599cabb 100644 >> --- a/drivers/media/platform/davinci/vpif.c >> +++ b/drivers/media/platform/davinci/vpif.c >> @@ -23,8 +23,8 @@ >> #include <linux/spinlock.h> >> #include <linux/kernel.h> >> #include <linux/io.h> >> -#include <linux/clk.h> >> #include <linux/err.h> >> +#include <linux/pm_runtime.h> >> #include <linux/v4l2-dv-timings.h> >> >> #include <mach/hardware.h> >> @@ -44,7 +44,6 @@ static struct resource *res; >> spinlock_t vpif_lock; >> >> void __iomem *vpif_base; >> -struct clk *vpif_clk; >> >> /** >> * ch_params: video standard configuration parameters for vpif >> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev) >> goto fail; >> } >> >> - vpif_clk = clk_get(&pdev->dev, "vpif"); >> - if (IS_ERR(vpif_clk)) { >> - status = PTR_ERR(vpif_clk); >> - goto clk_fail; >> - } >> - clk_prepare_enable(vpif_clk); >> + pm_runtime_enable(&pdev->dev); >> + pm_runtime_resume(&pdev->dev); >> + >> + pm_runtime_get(&pdev->dev); > > pm_runtime_get() calls pm_runtime_resume() if needed, so is the call to resume() > really necessary? > Agreed I'll drop the call to pm_runtime_resume() and post a v3. Regards, --Prabhakar > Regards, > > Hans > >> >> spin_lock_init(&vpif_lock); >> dev_info(&pdev->dev, "vpif probe success\n"); >> return 0; >> >> -clk_fail: >> - iounmap(vpif_base); >> fail: >> release_mem_region(res->start, res_len); >> return status; >> @@ -459,11 +454,6 @@ fail: >> >> static int vpif_remove(struct platform_device *pdev) >> { >> - if (vpif_clk) { >> - clk_disable_unprepare(vpif_clk); >> - clk_put(vpif_clk); >> - } >> - >> iounmap(vpif_base); >> release_mem_region(res->start, res_len); >> return 0; >> @@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev) >> #ifdef CONFIG_PM >> static int vpif_suspend(struct device *dev) >> { >> - clk_disable_unprepare(vpif_clk); >> + pm_runtime_put(dev); >> return 0; >> } >> >> static int vpif_resume(struct device *dev) >> { >> - clk_prepare_enable(vpif_clk); >> + pm_runtime_get(dev); >> return 0; >> } >> >> -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c index 28638a8..599cabb 100644 --- a/drivers/media/platform/davinci/vpif.c +++ b/drivers/media/platform/davinci/vpif.c @@ -23,8 +23,8 @@ #include <linux/spinlock.h> #include <linux/kernel.h> #include <linux/io.h> -#include <linux/clk.h> #include <linux/err.h> +#include <linux/pm_runtime.h> #include <linux/v4l2-dv-timings.h> #include <mach/hardware.h> @@ -44,7 +44,6 @@ static struct resource *res; spinlock_t vpif_lock; void __iomem *vpif_base; -struct clk *vpif_clk; /** * ch_params: video standard configuration parameters for vpif @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev) goto fail; } - vpif_clk = clk_get(&pdev->dev, "vpif"); - if (IS_ERR(vpif_clk)) { - status = PTR_ERR(vpif_clk); - goto clk_fail; - } - clk_prepare_enable(vpif_clk); + pm_runtime_enable(&pdev->dev); + pm_runtime_resume(&pdev->dev); + + pm_runtime_get(&pdev->dev); spin_lock_init(&vpif_lock); dev_info(&pdev->dev, "vpif probe success\n"); return 0; -clk_fail: - iounmap(vpif_base); fail: release_mem_region(res->start, res_len); return status; @@ -459,11 +454,6 @@ fail: static int vpif_remove(struct platform_device *pdev) { - if (vpif_clk) { - clk_disable_unprepare(vpif_clk); - clk_put(vpif_clk); - } - iounmap(vpif_base); release_mem_region(res->start, res_len); return 0; @@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int vpif_suspend(struct device *dev) { - clk_disable_unprepare(vpif_clk); + pm_runtime_put(dev); return 0; } static int vpif_resume(struct device *dev) { - clk_prepare_enable(vpif_clk); + pm_runtime_get(dev); return 0; }