@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio.h>
@@ -121,6 +122,8 @@ struct mt9p031 {
struct mutex power_lock; /* lock to protect power_count */
int power_count;
+ struct clk *clk;
+
enum mt9p031_model model;
struct aptina_pll pll;
int reset;
@@ -195,7 +198,7 @@ static int mt9p031_reset(struct mt9p031 *mt9p031)
0);
}
-static int mt9p031_pll_setup(struct mt9p031 *mt9p031)
+static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
{
static const struct aptina_pll_limits limits = {
.ext_clock_min = 6000000,
@@ -216,6 +219,12 @@ static int mt9p031_pll_setup(struct mt9p031 *mt9p031)
struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
struct mt9p031_platform_data *pdata = mt9p031->pdata;
+ mt9p031->clk = devm_clk_get(&client->dev, NULL);
+ if (IS_ERR(mt9p031->clk))
+ return PTR_ERR(mt9p031->clk);
+
+ clk_set_rate(mt9p031->clk, pdata->ext_freq);
+
mt9p031->pll.ext_clock = pdata->ext_freq;
mt9p031->pll.pix_clock = pdata->target_freq;
@@ -265,9 +274,8 @@ static int mt9p031_power_on(struct mt9p031 *mt9p031)
}
/* Emable clock */
- if (mt9p031->pdata->set_xclk)
- mt9p031->pdata->set_xclk(&mt9p031->subdev,
- mt9p031->pdata->ext_freq);
+ if (mt9p031->clk)
+ clk_prepare_enable(mt9p031->clk);
/* Now RESET_BAR must be high */
if (mt9p031->reset != -1) {
@@ -285,8 +293,8 @@ static void mt9p031_power_off(struct mt9p031 *mt9p031)
usleep_range(1000, 2000);
}
- if (mt9p031->pdata->set_xclk)
- mt9p031->pdata->set_xclk(&mt9p031->subdev, 0);
+ if (mt9p031->clk)
+ clk_disable_unprepare(mt9p031->clk);
}
static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on)
@@ -1009,7 +1017,7 @@ static int mt9p031_probe(struct i2c_client *client,
mt9p031->reset = pdata->reset;
}
- ret = mt9p031_pll_setup(mt9p031);
+ ret = mt9p031_clk_setup(mt9p031);
done:
if (ret < 0) {
@@ -5,13 +5,11 @@ struct v4l2_subdev;
/*
* struct mt9p031_platform_data - MT9P031 platform data
- * @set_xclk: Clock frequency set callback
* @reset: Chip reset GPIO (set to -1 if not used)
* @ext_freq: Input clock frequency
* @target_freq: Pixel clock frequency
*/
struct mt9p031_platform_data {
- int (*set_xclk)(struct v4l2_subdev *subdev, int hz);
int reset;
int ext_freq;
int target_freq;
Configure the device external clock using the common clock framework instead of a board code callback function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/media/i2c/mt9p031.c | 22 +++++++++++++++------- include/media/mt9p031.h | 2 -- 2 files changed, 15 insertions(+), 9 deletions(-)