diff mbox

cx24117[v2]: Add new dvb-frontend driver (tested cards: TBS6980 and TBS6981 Dual tuner DVB-S/S2)

Message ID 1374056126-4020-1-git-send-email-ljalvs@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Luis Alves July 17, 2013, 10:15 a.m. UTC
[v2] Fixed/changed according to first review.

Regards,
Luis


Signed-off-by: Luis Alves <ljalvs@gmail.com>
---
 drivers/media/dvb-frontends/Kconfig       |    7 +
 drivers/media/dvb-frontends/Makefile      |    1 +
 drivers/media/dvb-frontends/cx24117.c     | 1645 +++++++++++++++++++++++++++++
 drivers/media/dvb-frontends/cx24117.h     |   47 +
 drivers/media/pci/cx23885/Kconfig         |    1 +
 drivers/media/pci/cx23885/cx23885-cards.c |   65 ++
 drivers/media/pci/cx23885/cx23885-dvb.c   |   31 +
 drivers/media/pci/cx23885/cx23885-input.c |   12 +
 drivers/media/pci/cx23885/cx23885.h       |    2 +
 9 files changed, 1811 insertions(+)
 create mode 100644 drivers/media/dvb-frontends/cx24117.c
 create mode 100644 drivers/media/dvb-frontends/cx24117.h
diff mbox

Patch

diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index 0e2ec6f..bddbab4 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -200,6 +200,13 @@  config DVB_CX24116
 	help
 	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
 
+config DVB_CX24117
+	tristate "Conexant CX24117 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A Dual DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
 config DVB_SI21XX
 	tristate "Silicon Labs SI21XX based"
 	depends on DVB_CORE && I2C
diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile
index cebc0fa..f9cb43d 100644
--- a/drivers/media/dvb-frontends/Makefile
+++ b/drivers/media/dvb-frontends/Makefile
@@ -76,6 +76,7 @@  obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
 obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
 obj-$(CONFIG_DVB_AF9013) += af9013.o
 obj-$(CONFIG_DVB_CX24116) += cx24116.o
+obj-$(CONFIG_DVB_CX24117) += cx24117.o
 obj-$(CONFIG_DVB_SI21XX) += si21xx.o
 obj-$(CONFIG_DVB_STV0288) += stv0288.o
 obj-$(CONFIG_DVB_STB6000) += stb6000.o
diff --git a/drivers/media/dvb-frontends/cx24117.c b/drivers/media/dvb-frontends/cx24117.c
new file mode 100644
index 0000000..f55f8a2
--- /dev/null
+++ b/drivers/media/dvb-frontends/cx24117.c
@@ -0,0 +1,1645 @@ 
+/*
+    Conexant cx24117/cx24132 - Dual DVBS/S2 Satellite demod/tuner driver
+
+    Copyright (C) 2013 Luis Alves <ljalvs@gmail.com>
+	July, 6th 2013
+	    First release based on cx24116 driver by:
+	    Steven Toth and Georg Acher, Darron Broad, Igor Liplianin
+            Cards currently supported:
+		TBS6980 - Dual DVBS/S2 PCIe card
+		TBS6981 - Dual DVBS/S2 PCIe card
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+
+#include "dvb_frontend.h"
+#include "cx24117.h"
+
+
+#define CX24117_DEFAULT_FIRMWARE "dvb-fe-cx24117.fw"
+#define CX24117_SEARCH_RANGE_KHZ 5000
+
+/* known registers */
+#define CX24117_REG_COMMAND      (0x00)      /* command buffer */
+#define CX24117_REG_EXECUTE      (0x1f)      /* execute command */
+
+#define CX24117_REG_FREQ3_0      (0x34)      /* frequency */
+#define CX24117_REG_FREQ2_0      (0x35)
+#define CX24117_REG_FREQ1_0      (0x36)
+#define CX24117_REG_STATE0       (0x39)
+#define CX24117_REG_SSTATUS0     (0x3a)      /* demod0 signal high / status */
+#define CX24117_REG_SIGNAL0      (0x3b)
+#define CX24117_REG_FREQ5_0      (0x3c)      /* +-freq */
+#define CX24117_REG_FREQ6_0      (0x3d)
+#define CX24117_REG_SRATE2_0     (0x3e)      /* +- 1000 * srate */
+#define CX24117_REG_SRATE1_0     (0x3f)
+#define CX24117_REG_QUALITY2_0   (0x40)
+#define CX24117_REG_QUALITY1_0   (0x41)
+
+#define CX24117_REG_BER4_0       (0x47)
+#define CX24117_REG_BER3_0       (0x48)
+#define CX24117_REG_BER2_0       (0x49)
+#define CX24117_REG_BER1_0       (0x4a)
+#define CX24117_REG_DVBS_UCB2_0  (0x4b)
+#define CX24117_REG_DVBS_UCB1_0  (0x4c)
+#define CX24117_REG_DVBS2_UCB2_0 (0x50)
+#define CX24117_REG_DVBS2_UCB1_0 (0x51)
+#define CX24117_REG_QSTATUS0     (0x93)
+#define CX24117_REG_CLKDIV0      (0xe6)
+#define CX24117_REG_RATEDIV0     (0xf0)
+
+
+#define CX24117_REG_FREQ3_1      (0x55)      /* frequency */
+#define CX24117_REG_FREQ2_1      (0x56)
+#define CX24117_REG_FREQ1_1      (0x57)
+#define CX24117_REG_STATE1       (0x5a)
+#define CX24117_REG_SSTATUS1     (0x5b)      /* demod1 signal high / status */
+#define CX24117_REG_SIGNAL1      (0x5c)
+#define CX24117_REG_FREQ5_1      (0x5d)      /* +- freq */
+#define CX24117_REG_FREQ4_1      (0x5e)
+#define CX24117_REG_SRATE2_1     (0x5f)
+#define CX24117_REG_SRATE1_1     (0x60)
+#define CX24117_REG_QUALITY2_1   (0x61)
+#define CX24117_REG_QUALITY1_1   (0x62)
+#define CX24117_REG_BER4_1       (0x68)
+#define CX24117_REG_BER3_1       (0x69)
+#define CX24117_REG_BER2_1       (0x6a)
+#define CX24117_REG_BER1_1       (0x6b)
+#define CX24117_REG_DVBS_UCB2_1  (0x6c)
+#define CX24117_REG_DVBS_UCB1_1  (0x6d)
+#define CX24117_REG_DVBS2_UCB2_1 (0x71)
+#define CX24117_REG_DVBS2_UCB1_1 (0x72)
+#define CX24117_REG_QSTATUS1     (0x9f)
+#define CX24117_REG_CLKDIV1      (0xe7)
+#define CX24117_REG_RATEDIV1     (0xf1)
+
+
+/* arg buffer size */
+#define CX24117_ARGLEN       (0x1e)
+
+/* rolloff */
+#define CX24117_ROLLOFF_020  (0x00)
+#define CX24117_ROLLOFF_025  (0x01)
+#define CX24117_ROLLOFF_035  (0x02)
+
+/* pilot bit */
+#define CX24117_PILOT_OFF    (0x00)
+#define CX24117_PILOT_ON     (0x40)
+#define CX24117_PILOT_AUTO   (0x80)
+
+/* signal status */
+#define CX24117_HAS_SIGNAL   (0x01)
+#define CX24117_HAS_CARRIER  (0x02)
+#define CX24117_HAS_VITERBI  (0x04)
+#define CX24117_HAS_SYNCLOCK (0x08)
+#define CX24117_STATUS_MASK  (0x0f)
+#define CX24117_SIGNAL_MASK  (0xc0)
+
+
+/* arg offset for DiSEqC */
+#define CX24117_DISEQC_DEMOD  (1)
+#define CX24117_DISEQC_BURST  (2)
+#define CX24117_DISEQC_ARG3_2 (3)   /* unknown value=2 */
+#define CX24117_DISEQC_ARG4_0 (4)   /* unknown value=0 */
+#define CX24117_DISEQC_ARG5_0 (5)   /* unknown value=0 */
+#define CX24117_DISEQC_MSGLEN (6)
+#define CX24117_DISEQC_MSGOFS (7)
+
+/* DiSEqC burst */
+#define CX24117_DISEQC_MINI_A (0)
+#define CX24117_DISEQC_MINI_B (1)
+
+
+#define CX24117_PNE	(0) /* 0 disabled / 2 enabled */
+#define CX24117_OCC	(1) /* 0 disabled / 1 enabled */
+
+
+enum cmds {
+	CMD_SET_VCO     = 0x10,
+	CMD_TUNEREQUEST = 0x11,
+	CMD_MPEGCONFIG  = 0x13,
+	CMD_TUNERINIT   = 0x14,
+	CMD_LNBSEND     = 0x21, /* Formerly CMD_SEND_DISEQC */
+	CMD_LNBDCLEVEL  = 0x22,
+	CMD_SET_TONE    = 0x23,
+	CMD_UPDFWVERS   = 0x35,
+	CMD_TUNERSLEEP  = 0x36,
+};
+
+/* The Demod/Tuner can't easily provide these, we cache them */
+struct cx24117_tuning {
+	u32 frequency;
+	u32 symbol_rate;
+	fe_spectral_inversion_t inversion;
+	fe_code_rate_t fec;
+
+	fe_delivery_system_t delsys;
+	fe_modulation_t modulation;
+	fe_pilot_t pilot;
+	fe_rolloff_t rolloff;
+
+	/* Demod values */
+	u8 fec_val;
+	u8 fec_mask;
+	u8 inversion_val;
+	u8 pilot_val;
+	u8 rolloff_val;
+};
+
+/* Basic commands that are sent to the firmware */
+struct cx24117_cmd {
+	u8 len;
+	u8 args[CX24117_ARGLEN];
+};
+
+/* common to both fe's */
+struct cx24117_priv {
+	u8 demod_address;
+	struct i2c_adapter *i2c;
+	u8 skip_fw_load;
+
+	struct mutex fe_lock;
+	atomic_t fe_nr;
+};
+
+/* one per each fe */
+struct cx24117_state {
+	struct cx24117_priv *priv;
+	struct dvb_frontend frontend;
+
+	struct cx24117_tuning dcur;
+	struct cx24117_tuning dnxt;
+	struct cx24117_cmd dsec_cmd;
+
+	int demod;
+};
+
+/* modfec (modulation and FEC) lookup table */
+/* Check cx24116.c for a detailed description of each field */
+static struct cx24117_modfec {
+	fe_delivery_system_t delivery_system;
+	fe_modulation_t modulation;
+	fe_code_rate_t fec;
+	u8 mask;	/* In DVBS mode this is used to autodetect */
+	u8 val;		/* Passed to the firmware to indicate mode selection */
+} CX24117_MODFEC_MODES[] = {
+ /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */
+
+ /*mod   fec       mask  val */
+ { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 },
+ { SYS_DVBS, QPSK, FEC_1_2,  0x02, 0x2e }, /* 00000010 00101110 */
+ { SYS_DVBS, QPSK, FEC_2_3,  0x04, 0x2f }, /* 00000100 00101111 */
+ { SYS_DVBS, QPSK, FEC_3_4,  0x08, 0x30 }, /* 00001000 00110000 */
+ { SYS_DVBS, QPSK, FEC_4_5,  0xfe, 0x30 }, /* 000?0000 ?        */
+ { SYS_DVBS, QPSK, FEC_5_6,  0x20, 0x31 }, /* 00100000 00110001 */
+ { SYS_DVBS, QPSK, FEC_6_7,  0xfe, 0x30 }, /* 0?000000 ?        */
+ { SYS_DVBS, QPSK, FEC_7_8,  0x80, 0x32 }, /* 10000000 00110010 */
+ { SYS_DVBS, QPSK, FEC_8_9,  0xfe, 0x30 }, /* 0000000? ?        */
+ { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 },
+ /* NBC-QPSK */
+ { SYS_DVBS2, QPSK, FEC_NONE, 0x00, 0x00 },
+ { SYS_DVBS2, QPSK, FEC_1_2,  0x00, 0x04 },
+ { SYS_DVBS2, QPSK, FEC_3_5,  0x00, 0x05 },
+ { SYS_DVBS2, QPSK, FEC_2_3,  0x00, 0x06 },
+ { SYS_DVBS2, QPSK, FEC_3_4,  0x00, 0x07 },
+ { SYS_DVBS2, QPSK, FEC_4_5,  0x00, 0x08 },
+ { SYS_DVBS2, QPSK, FEC_5_6,  0x00, 0x09 },
+ { SYS_DVBS2, QPSK, FEC_8_9,  0x00, 0x0a },
+ { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b },
+ { SYS_DVBS2, QPSK, FEC_AUTO, 0x00, 0x00 },
+ /* 8PSK */
+ { SYS_DVBS2, PSK_8, FEC_NONE, 0x00, 0x00 },
+ { SYS_DVBS2, PSK_8, FEC_3_5,  0x00, 0x0c },
+ { SYS_DVBS2, PSK_8, FEC_2_3,  0x00, 0x0d },
+ { SYS_DVBS2, PSK_8, FEC_3_4,  0x00, 0x0e },
+ { SYS_DVBS2, PSK_8, FEC_5_6,  0x00, 0x0f },
+ { SYS_DVBS2, PSK_8, FEC_8_9,  0x00, 0x10 },
+ { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 },
+ { SYS_DVBS2, PSK_8, FEC_AUTO, 0x00, 0x00 },
+ /*
+  * 'val' can be found in the FECSTATUS register when tuning.
+  * FECSTATUS will give the actual FEC in use if tuning was successful.
+  */
+};
+
+
+static int cx24117_writereg(struct cx24117_state *state, u8 reg, u8 data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = { .addr = state->priv->demod_address,
+		.flags = 0, .buf = buf, .len = 2 };
+	int err;
+
+	dev_dbg(&state->priv->i2c->dev,
+			"%s() demod%d i2c wr @0x%02x=0x%02x\n",
+			__func__, state->demod, reg, data);
+
+	err = i2c_transfer(state->priv->i2c, &msg, 1);
+	if (err != 1) {
+		dev_warn(&state->priv->i2c->dev,
+			"%s: demod%d i2c wr err(%i) @0x%02x=0x%02x\n",
+			KBUILD_MODNAME, state->demod, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int cx24117_writecmd(struct cx24117_state *state,
+	struct cx24117_cmd *cmd)
+{
+	struct i2c_msg msg;
+	u8 buf[CX24117_ARGLEN+1];
+	int ret = 0;
+
+	dev_dbg(&state->priv->i2c->dev,
+			"%s() demod%d i2c wr cmd len=%d\n",
+			__func__, state->demod, cmd->len);
+
+	buf[0] = CX24117_REG_COMMAND;
+	memcpy(&buf[1], cmd->args, cmd->len);
+
+	msg.addr = state->priv->demod_address;
+	msg.flags = 0;
+	msg.len = cmd->len+1;
+	msg.buf = buf;
+	ret = i2c_transfer(state->priv->i2c, &msg, 1);
+	if (ret != 1) {
+		dev_warn(&state->priv->i2c->dev,
+			"%s: demod%d i2c wr cmd err(%i) len=%d\n",
+			KBUILD_MODNAME, state->demod, ret, cmd->len);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int cx24117_readreg(struct cx24117_state *state, u8 reg)
+{
+	int ret;
+	u8 recv = 0;
+	struct i2c_msg msg[] = {
+		{ .addr = state->priv->demod_address, .flags = 0,
+			.buf = &reg, .len = 1 },
+		{ .addr = state->priv->demod_address, .flags = I2C_M_RD,
+			.buf = &recv, .len = 1 }
+	};
+
+	ret = i2c_transfer(state->priv->i2c, msg, 2);
+
+	if (ret != 2) {
+		dev_warn(&state->priv->i2c->dev,
+			"%s: demod%d i2c rd err(%d) @0x%x\n",
+			KBUILD_MODNAME, state->demod, ret, reg);
+		return -EREMOTEIO;
+	}
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d i2c rd @0x%02x=0x%02x\n",
+		__func__, state->demod, reg, recv);
+
+	return recv;
+}
+
+static int cx24117_readregN(struct cx24117_state *state,
+	u8 reg, u8 *buf, int len)
+{
+	int ret;
+	struct i2c_msg msg[] = {
+		{ .addr = state->priv->demod_address, .flags = 0,
+			.buf = &reg, .len = 1 },
+		{ .addr = state->priv->demod_address, .flags = I2C_M_RD,
+			.buf = buf, .len = len }
+	};
+
+	ret = i2c_transfer(state->priv->i2c, msg, 2);
+
+	if (ret != 2) {
+		dev_warn(&state->priv->i2c->dev,
+			"%s: demod%d i2c rd err(%d) @0x%x\n",
+			KBUILD_MODNAME, state->demod, ret, reg);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int cx24117_set_inversion(struct cx24117_state *state,
+	fe_spectral_inversion_t inversion)
+{
+	dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n",
+		__func__, inversion, state->demod);
+
+	switch (inversion) {
+	case INVERSION_OFF:
+		state->dnxt.inversion_val = 0x00;
+		break;
+	case INVERSION_ON:
+		state->dnxt.inversion_val = 0x04;
+		break;
+	case INVERSION_AUTO:
+		state->dnxt.inversion_val = 0x0C;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	state->dnxt.inversion = inversion;
+
+	return 0;
+}
+
+static int cx24117_lookup_fecmod(struct cx24117_state *state,
+	fe_delivery_system_t d, fe_modulation_t m, fe_code_rate_t f)
+{
+	int i, ret = -EOPNOTSUPP;
+
+	dev_dbg(&state->priv->i2c->dev,
+		"%s(demod(0x%02x,0x%02x) demod%d\n",
+		__func__, m, f, state->demod);
+
+	for (i = 0; i < ARRAY_SIZE(CX24117_MODFEC_MODES); i++) {
+		if ((d == CX24117_MODFEC_MODES[i].delivery_system) &&
+			(m == CX24117_MODFEC_MODES[i].modulation) &&
+			(f == CX24117_MODFEC_MODES[i].fec)) {
+				ret = i;
+				break;
+			}
+	}
+
+	return ret;
+}
+
+static int cx24117_set_fec(struct cx24117_state *state,
+	fe_delivery_system_t delsys, fe_modulation_t mod, fe_code_rate_t fec)
+{
+	int ret;
+
+	dev_dbg(&state->priv->i2c->dev,
+		"%s(0x%02x,0x%02x) demod%d\n",
+		__func__, mod, fec, state->demod);
+
+	ret = cx24117_lookup_fecmod(state, delsys, mod, fec);
+	if (ret < 0)
+		return ret;
+
+	state->dnxt.fec = fec;
+	state->dnxt.fec_val = CX24117_MODFEC_MODES[ret].val;
+	state->dnxt.fec_mask = CX24117_MODFEC_MODES[ret].mask;
+	dev_dbg(&state->priv->i2c->dev,
+		"%s() demod%d mask/val = 0x%02x/0x%02x\n", __func__,
+		state->demod, state->dnxt.fec_mask, state->dnxt.fec_val);
+
+	return 0;
+}
+
+static int cx24117_set_symbolrate(struct cx24117_state *state, u32 rate)
+{
+	dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n",
+		__func__, rate, state->demod);
+
+	state->dnxt.symbol_rate = rate;
+	dev_dbg(&state->priv->i2c->dev,
+		"%s() demod%d symbol_rate = %d\n",
+		__func__, state->demod, rate);
+
+	return 0;
+}
+
+static int cx24117_load_firmware(struct dvb_frontend *fe,
+	const struct firmware *fw);
+
+static int cx24117_firmware_ondemand(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	const struct firmware *fw;
+	int ret = 0;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d skip_fw_load=%d\n",
+		__func__, state->demod, state->priv->skip_fw_load);
+
+	if (state->priv->skip_fw_load)
+		return 0;
+
+	/* check if firmware if already running */
+	if (cx24117_readreg(state, 0xeb) != 0xa) {
+		/* Load firmware */
+		/* request the firmware, this will block until loaded */
+		printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n",
+			__func__, CX24117_DEFAULT_FIRMWARE);
+		ret = request_firmware(&fw, CX24117_DEFAULT_FIRMWARE,
+			state->priv->i2c->dev.parent);
+		printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n",
+			__func__);
+		if (ret) {
+			printk(KERN_ERR "%s: No firmware uploaded "
+				"(timeout or file not found?)\n", __func__);
+			return ret;
+		}
+
+		/* Make sure we don't recurse back through here
+		 * during loading */
+		state->priv->skip_fw_load = 1;
+
+		ret = cx24117_load_firmware(fe, fw);
+		if (ret)
+			printk(KERN_ERR "%s: Writing firmware failed\n",
+				__func__);
+
+		release_firmware(fw);
+
+		printk(KERN_INFO "%s: Firmware upload %s\n", __func__,
+			ret == 0 ? "complete" : "failed");
+
+		/* Ensure firmware is always loaded if required */
+		state->priv->skip_fw_load = 0;
+	}
+
+	return ret;
+}
+
+/* Take a basic firmware command structure, format it
+ * and forward it for processing
+ */
+static int cx24117_cmd_execute_nolock(struct dvb_frontend *fe,
+	struct cx24117_cmd *cmd)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	int i, ret;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
+		__func__, state->demod);
+
+	/* Load the firmware if required */
+	ret = cx24117_firmware_ondemand(fe);
+	if (ret != 0) {
+		printk(KERN_ERR "%s(): Unable initialise the firmware\n",
+			__func__);
+		return ret;
+	}
+
+	/* Write the command */
+	cx24117_writecmd(state, cmd);
+
+	/* Start execution and wait for cmd to terminate */
+	cx24117_writereg(state, CX24117_REG_EXECUTE, 0x01);
+	i = 0;
+	while (cx24117_readreg(state, CX24117_REG_EXECUTE)) {
+		msleep(10);
+		if (i++ > 64) {
+			/* Avoid looping forever if the firmware does
+				not respond */
+			printk(KERN_WARNING "%s() Firmware not responding\n",
+				__func__);
+			return -EREMOTEIO;
+		}
+	}
+	return 0;
+}
+
+static int cx24117_cmd_execute(struct dvb_frontend *fe, struct cx24117_cmd *cmd)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	int ret;
+	
+	mutex_lock(&state->priv->fe_lock);
+	ret = cx24117_cmd_execute_nolock(fe, cmd);
+	mutex_unlock(&state->priv->fe_lock);
+	
+	return ret;
+}
+
+static int cx24117_load_firmware(struct dvb_frontend *fe,
+	const struct firmware *fw)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct cx24117_cmd cmd;
+	int i, ret;
+	unsigned char vers[4];
+
+	struct i2c_msg msg;
+	u8 *buf;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d " \
+		"Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
+		__func__, state->demod, fw->size,
+		fw->data[0], fw->data[1],
+		fw->data[fw->size-2], fw->data[fw->size-1]);
+
+	cx24117_writereg(state, 0xea, 0x00);
+	cx24117_writereg(state, 0xea, 0x01);
+	cx24117_writereg(state, 0xea, 0x00);
+
+	cx24117_writereg(state, 0xce, 0x92);
+
+	cx24117_writereg(state, 0xfb, 0x00);
+	cx24117_writereg(state, 0xfc, 0x00);
+
+	cx24117_writereg(state, 0xc3, 0x04);
+	cx24117_writereg(state, 0xc4, 0x04);
+
+	cx24117_writereg(state, 0xce, 0x00);
+	cx24117_writereg(state, 0xcf, 0x00);
+
+	cx24117_writereg(state, 0xea, 0x00);
+	cx24117_writereg(state, 0xeb, 0x0c);
+	cx24117_writereg(state, 0xec, 0x06);
+	cx24117_writereg(state, 0xed, 0x05);
+	cx24117_writereg(state, 0xee, 0x03);
+	cx24117_writereg(state, 0xef, 0x05);
+
+	cx24117_writereg(state, 0xf3, 0x03);
+	cx24117_writereg(state, 0xf4, 0x44);
+	
+	cx24117_writereg(state, CX24117_REG_RATEDIV0, 0x04);
+	cx24117_writereg(state, CX24117_REG_CLKDIV0, 0x02);
+
+	cx24117_writereg(state, CX24117_REG_RATEDIV1, 0x04);
+	cx24117_writereg(state, CX24117_REG_CLKDIV1, 0x02);
+
+	cx24117_writereg(state, 0xf2, 0x04);
+	cx24117_writereg(state, 0xe8, 0x02);
+	cx24117_writereg(state, 0xea, 0x01);
+	cx24117_writereg(state, 0xc8, 0x00);
+	cx24117_writereg(state, 0xc9, 0x00);
+	cx24117_writereg(state, 0xca, 0x00);
+	cx24117_writereg(state, 0xcb, 0x00);
+	cx24117_writereg(state, 0xcc, 0x00);
+	cx24117_writereg(state, 0xcd, 0x00);
+	cx24117_writereg(state, 0xe4, 0x03);
+	cx24117_writereg(state, 0xeb, 0x0a);
+
+	cx24117_writereg(state, 0xfb, 0x00);
+	cx24117_writereg(state, 0xe0, 0x76);
+	cx24117_writereg(state, 0xf7, 0x81);
+	cx24117_writereg(state, 0xf8, 0x00);
+	cx24117_writereg(state, 0xf9, 0x00);
+
+	buf = kmalloc(fw->size+1, GFP_KERNEL);
+	if (buf == NULL) {
+		state->priv->skip_fw_load = 0;
+		return -ENOMEM;
+	}
+
+	/* fw upload reg */
+	buf[0] = 0xfa;
+	memcpy(&buf[1], fw->data, fw->size);
+
+	/* prepare i2c message to send */
+	msg.addr = state->priv->demod_address;
+	msg.flags = 0;
+	msg.len = fw->size+1;
+	msg.buf = buf;
+
+	/* send fw */
+	i2c_transfer(state->priv->i2c, &msg, 1);
+
+	kfree(buf);
+
+	cx24117_writereg(state, 0xf7, 0x0c);
+	cx24117_writereg(state, 0xe0, 0x00);
+
+	/* CMD 1B */
+	cmd.args[0] = 0x1b;
+	cmd.args[1] = 0x00;
+	cmd.args[2] = 0x01;
+	cmd.args[3] = 0x00;
+	cmd.len = 4;
+	ret = cx24117_cmd_execute_nolock(fe, &cmd);
+	if (ret != 0) {
+		state->priv->skip_fw_load = 0;
+		printk("%s() Error running FW.\n", __func__);
+		return ret;
+	}
+
+	/* CMD 10 */
+	cmd.args[0] = CMD_SET_VCO;
+	cmd.args[1] = 0x06;
+	cmd.args[2] = 0x2b;
+	cmd.args[3] = 0xd8;
+	cmd.args[4] = 0xa5;
+	cmd.args[5] = 0xee;
+	cmd.args[6] = 0x03;
+	cmd.args[7] = 0x9d;
+	cmd.args[8] = 0xfc;
+	cmd.args[9] = 0x06;
+	cmd.args[10] = 0x02;
+	cmd.args[11] = 0x9d;
+	cmd.args[12] = 0xfc;
+	cmd.len = 13;
+	ret = cx24117_cmd_execute_nolock(fe, &cmd);
+	if (ret != 0) {
+		state->priv->skip_fw_load = 0;
+		printk("%s() Error2 running FW.\n", __func__);
+		return ret;
+	}
+
+	/* CMD 15 */
+	cmd.args[0] = 0x15;
+	cmd.args[1] = 0x00;
+	cmd.args[2] = 0x01;
+	cmd.args[3] = 0x00;
+	cmd.args[4] = 0x00;
+	cmd.args[5] = 0x01;
+	cmd.args[6] = 0x01;
+	cmd.args[7] = 0x01;
+	cmd.args[8] = 0x00;
+	cmd.args[9] = 0x05;
+	cmd.args[10] = 0x02;
+	cmd.args[11] = 0x02;
+	cmd.args[12] = 0x00;
+	cmd.len = 13;
+	ret = cx24117_cmd_execute_nolock(fe, &cmd);
+	if (ret != 0) {
+		state->priv->skip_fw_load = 0;
+		printk("%s() Error3 running FW.\n", __func__);
+		return ret;
+	}
+
+	/* CMD 13 */
+	cmd.args[0] = CMD_MPEGCONFIG;
+	cmd.args[1] = 0x00;
+	cmd.args[2] = 0x00;
+	cmd.args[3] = 0x00;
+	cmd.args[4] = 0x01;
+	cmd.args[5] = 0x00;
+	cmd.len = 6;
+	ret = cx24117_cmd_execute_nolock(fe, &cmd);
+	if (ret != 0) {
+		state->priv->skip_fw_load = 0;
+		printk("%s() Error4 running FW.\n", __func__);
+		return ret;
+	}
+
+	/* CMD 14 */
+	for (i = 0; i < 2; i++) {
+		cmd.args[0] = CMD_TUNERINIT;
+		cmd.args[1] = (u8) i;
+		cmd.args[2] = 0x00;
+		cmd.args[3] = 0x05;
+		cmd.args[4] = 0x00;
+		cmd.args[5] = 0x00;
+		cmd.args[6] = 0x55;
+		cmd.args[7] = 0x00;
+		cmd.len = 8;
+		ret = cx24117_cmd_execute_nolock(fe, &cmd);
+		if (ret != 0) {
+			state->priv->skip_fw_load = 0;
+			printk("%s() Error5 running FW.\n", __func__);
+			return ret;
+		}
+	}
+
+	cx24117_writereg(state, 0xce, 0xc0);
+	cx24117_writereg(state, 0xcf, 0x00);
+	cx24117_writereg(state, 0xe5, 0x04);
+
+
+	/* Firmware CMD 35: Get firmware version */
+	cmd.args[0] = CMD_UPDFWVERS;
+	cmd.len = 2;
+	for (i = 0; i < 4; i++) {
+		cmd.args[1] = i;
+		ret = cx24117_cmd_execute_nolock(fe, &cmd);
+		if (ret != 0) {
+			state->priv->skip_fw_load = 0;
+			printk("%s() Error7 running FW.\n", __func__);
+			return ret;
+		}
+		vers[i] = cx24117_readreg(state, 0x33);
+	}
+	printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__,
+		vers[0], vers[1], vers[2], vers[3]);
+	return 0;
+}
+
+static int cx24117_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	int lock;
+
+	lock = cx24117_readreg(state,
+		(state->demod == 0) ? CX24117_REG_SSTATUS0 :
+				      CX24117_REG_SSTATUS1 ) & 
+		CX24117_STATUS_MASK;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d status = 0x%02x\n",
+		__func__, state->demod, lock);
+
+	*status = 0;
+
+	if (lock & CX24117_HAS_SIGNAL)
+		*status |= FE_HAS_SIGNAL;
+	if (lock & CX24117_HAS_CARRIER)
+		*status |= FE_HAS_CARRIER;
+	if (lock & CX24117_HAS_VITERBI)
+		*status |= FE_HAS_VITERBI;
+	if (lock & CX24117_HAS_SYNCLOCK)
+		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int cx24117_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	int ret;
+	u8 buf[4];
+	u8 base_reg = (state->demod == 0) ?
+			CX24117_REG_BER4_0 :
+			CX24117_REG_BER4_1;
+
+	ret = cx24117_readregN(state, base_reg, buf, 4);
+	if (ret != 0)
+		return ret;
+
+	*ber = (buf[0] << 24) | (buf[1] << 16) |
+		(buf[1] << 8) | buf[0];
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d ber=0x%04x\n",
+		__func__, state->demod, *ber);
+
+	return 0;
+}
+
+static int cx24117_read_signal_strength(struct dvb_frontend *fe,
+	u16 *signal_strength)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct cx24117_cmd cmd;
+	int ret;
+	u16 sig_reading;
+	u8 buf[2];
+	u8 reg = (state->demod == 0) ?
+		CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1;
+
+	/* Firmware CMD 1A */
+	cmd.args[0] = 0x1a;
+	cmd.args[1] = (u8) state->demod;
+	cmd.len = 2;
+	ret = cx24117_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	ret = cx24117_readregN(state, reg, buf, 2);
+	if (ret != 0)
+		return ret;
+	sig_reading = ((buf[0] & CX24117_SIGNAL_MASK) << 2) | buf[1];
+
+	*signal_strength = -100 * sig_reading + 94324;
+
+	dev_dbg(&state->priv->i2c->dev,
+		"%s() demod%d raw / cooked = 0x%04x / 0x%04x\n",
+		__func__, state->demod, sig_reading, *signal_strength);
+
+	return 0;	
+}
+
+static int cx24117_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	int ret;
+	u8 buf[2];
+	u8 reg = (state->demod == 0) ?
+		CX24117_REG_QUALITY2_0 : CX24117_REG_QUALITY2_1;
+
+	ret = cx24117_readregN(state, reg, buf, 2);
+	if (ret != 0)
+		return ret;
+	*snr = (buf[0] << 8) | buf[1];
+
+	dev_dbg(&state->priv->i2c->dev,
+		"%s() demod%d snr = 0x%04x\n",
+		__func__, state->demod, *snr);
+
+	return ret;
+}
+
+static int cx24117_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	fe_delivery_system_t delsys = fe->dtv_property_cache.delivery_system;
+	int ret;
+	u8 buf[2];
+	u8 reg = (state->demod == 0) ?
+		CX24117_REG_DVBS_UCB2_0 :
+		CX24117_REG_DVBS_UCB2_1;
+
+	switch (delsys) {
+	case SYS_DVBS:
+		break;
+	case SYS_DVBS2:
+		reg += (CX24117_REG_DVBS2_UCB2_0 - CX24117_REG_DVBS_UCB2_0);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	ret = cx24117_readregN(state, reg, buf, 2);
+	if (ret != 0)
+		return ret;
+	*ucblocks = (buf[0] << 8) | buf[1];
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d ucb=0x%04x\n",
+		__func__, state->demod, *ucblocks);
+
+	return 0;
+}
+
+/* Overwrite the current tuning params, we are about to tune */
+static void cx24117_clone_params(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	state->dcur = state->dnxt;
+}
+
+/* Wait for LNB */
+static int cx24117_wait_for_lnb(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	int i;
+	u8 val, reg = (state->demod == 0) ? CX24117_REG_QSTATUS0 :
+					    CX24117_REG_QSTATUS1;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d qstatus = 0x%02x\n",
+		__func__, state->demod, cx24117_readreg(state, reg));
+
+	/* Wait for up to 300 ms */
+	for (i = 0; i < 10 ; i++) {
+		val = cx24117_readreg(state, reg) & 0x01;
+		if (val != 0)
+			return 0;
+		msleep(30);
+	}
+
+	dev_warn(&state->priv->i2c->dev, "%s: demod%d LNB not ready\n",
+		KBUILD_MODNAME, state->demod);
+
+	return -ETIMEDOUT; /* -EBUSY ? */
+}
+
+static int cx24117_set_voltage(struct dvb_frontend *fe,
+	fe_sec_voltage_t voltage)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct cx24117_cmd cmd;
+	int ret;
+	u8 reg = (state->demod == 0) ? 0x10 : 0x20;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d %s\n",
+		__func__, state->demod,
+		voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
+		voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "SEC_VOLTAGE_OFF");
+
+	/* CMD 32 */
+	cmd.args[0] = 0x32;
+	cmd.args[1] = reg;
+	cmd.args[2] = reg;
+	cmd.len = 3;
+	ret = cx24117_cmd_execute(fe, &cmd);
+	if (ret)
+		return ret;
+
+	if ((voltage == SEC_VOLTAGE_13) ||
+	    (voltage == SEC_VOLTAGE_18)) {
+		/* CMD 33 */
+		cmd.args[0] = 0x33;
+		cmd.args[1] = reg;
+		cmd.args[2] = reg;
+		cmd.len = 3;
+		ret = cx24117_cmd_execute(fe, &cmd);
+		if (ret != 0)
+			return ret;
+	
+		ret = cx24117_wait_for_lnb(fe);
+		if (ret != 0)
+			return ret;
+
+		/* Wait for voltage/min repeat delay */
+		msleep(100);
+
+		/* CMD 22 - CMD_LNBDCLEVEL */
+		cmd.args[0] = CMD_LNBDCLEVEL;
+		cmd.args[1] = state->demod ? 0 : 1;
+		cmd.args[2] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00);
+		cmd.len = 3;
+
+		/* Min delay time before DiSEqC send */
+		msleep(15);
+	} else {
+		cmd.args[0] = 0x33;
+		cmd.args[1] = 0x00;
+		cmd.args[2] = reg;
+		cmd.len = 3;
+	}
+
+	return cx24117_cmd_execute(fe, &cmd);
+}
+
+static int cx24117_set_tone(struct dvb_frontend *fe,
+	fe_sec_tone_mode_t tone)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct cx24117_cmd cmd;
+	int ret;
+
+	dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n",
+		__func__, state->demod, tone);
+	if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
+		dev_warn(&state->priv->i2c->dev, "%s: demod%d invalid tone=%d\n",
+			KBUILD_MODNAME, state->demod, tone);
+		return -EINVAL;
+	}
+
+	/* Wait for LNB ready */
+	ret = cx24117_wait_for_lnb(fe);
+	if (ret != 0)
+		return ret;
+
+	/* Min delay time after DiSEqC send */
+	msleep(15);
+
+	/* Set the tone */
+	/* CMD 23 - CMD_SET_TONE */
+	cmd.args[0] = CMD_SET_TONE;
+	cmd.args[1] = (state->demod ? 0 : 1);
+	cmd.args[2] = 0x00;
+	cmd.args[3] = 0x00;
+	cmd.len = 5;
+	switch (tone) {
+	case SEC_TONE_ON:
+		cmd.args[4] = 0x01;
+		break;
+	case SEC_TONE_OFF:
+		cmd.args[4] = 0x00;
+		break;
+	}
+
+	msleep(15);
+
+	return cx24117_cmd_execute(fe, &cmd);
+}
+
+/* Initialise DiSEqC */
+static int cx24117_diseqc_init(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+
+	/* Prepare a DiSEqC command */
+	state->dsec_cmd.args[0] = CMD_LNBSEND;
+
+	/* demod */
+	state->dsec_cmd.args[CX24117_DISEQC_DEMOD] = state->demod ? 0 : 1;
+
+	/* DiSEqC burst */
+	state->dsec_cmd.args[CX24117_DISEQC_BURST] = CX24117_DISEQC_MINI_A;
+
+	/* Unknown */
+	state->dsec_cmd.args[CX24117_DISEQC_ARG3_2] = 0x02;
+	state->dsec_cmd.args[CX24117_DISEQC_ARG4_0] = 0x00;
+
+	/* Continuation flag? */
+	state->dsec_cmd.args[CX24117_DISEQC_ARG5_0] = 0x00;
+
+	/* DiSEqC message length */
+	state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = 0x00;
+
+	/* Command length */
+	state->dsec_cmd.len = 7;
+
+	return 0;
+}
+
+/* Send DiSEqC message */
+static int cx24117_send_diseqc_msg(struct dvb_frontend *fe,
+	struct dvb_diseqc_master_cmd *d)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	int i, ret;
+
+	/* Dump DiSEqC message */
+	/*if (debug) {
+		printk(KERN_INFO "cx24117: demod %d %s(",
+			state->demod, __func__);
+		for (i = 0 ; i < d->msg_len ;) {
+			printk(KERN_INFO "0x%02x", d->msg[i]);
+			if (++i < d->msg_len)
+				printk(KERN_INFO ", ");
+		}
+		printk(")\n");
+	}*/
+
+	/* Validate length */
+	if (d->msg_len > 15)
+		return -EINVAL;
+
+	/* DiSEqC message */
+	for (i = 0; i < d->msg_len; i++)
+		state->dsec_cmd.args[CX24117_DISEQC_MSGOFS + i] = d->msg[i];
+
+	/* DiSEqC message length */
+	state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = d->msg_len;
+
+	/* Command length */
+	state->dsec_cmd.len = CX24117_DISEQC_MSGOFS +
+		state->dsec_cmd.args[CX24117_DISEQC_MSGLEN];
+
+	/*
+	 * Message is sent with derived else cached burst
+	 *
+	 * WRITE PORT GROUP COMMAND 38
+	 *
+	 * 0/A/A: E0 10 38 F0..F3
+	 * 1/B/B: E0 10 38 F4..F7
+	 * 2/C/A: E0 10 38 F8..FB
+	 * 3/D/B: E0 10 38 FC..FF
+	 *
+	 * databyte[3]= 8421:8421
+	 *              ABCD:WXYZ
+	 *              CLR :SET
+	 *
+	 *              WX= PORT SELECT 0..3    (X=TONEBURST)
+	 *              Y = VOLTAGE             (0=13V, 1=18V)
+	 *              Z = BAND                (0=LOW, 1=HIGH(22K))
+	 */
+	if (d->msg_len >= 4 && d->msg[2] == 0x38)
+		state->dsec_cmd.args[CX24117_DISEQC_BURST] =
+			((d->msg[3] & 4) >> 2);
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d burst=%d\n",
+		__func__, state->demod,
+		state->dsec_cmd.args[CX24117_DISEQC_BURST]);
+
+	/* Wait for LNB ready */
+	ret = cx24117_wait_for_lnb(fe);
+	if (ret != 0)
+		return ret;
+
+	/* Wait for voltage/min repeat delay */
+	msleep(100);
+
+	/* Command */
+	ret = cx24117_cmd_execute(fe, &state->dsec_cmd);
+	if (ret != 0)
+		return ret;
+	/*
+	 * Wait for send
+	 *
+	 * Eutelsat spec:
+	 * >15ms delay          + (XXX determine if FW does this, see set_tone)
+	 *  13.5ms per byte     +
+	 * >15ms delay          +
+	 *  12.5ms burst        +
+	 * >15ms delay            (XXX determine if FW does this, see set_tone)
+	 */
+	msleep((state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] << 4) + 60);
+
+	return 0;
+}
+
+/* Send DiSEqC burst */
+static int cx24117_diseqc_send_burst(struct dvb_frontend *fe,
+	fe_sec_mini_cmd_t burst)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+
+	dev_dbg(&state->priv->i2c->dev, "%s(%d) demod=%d\n",
+		__func__, burst, state->demod);
+
+	/* DiSEqC burst */
+	if (burst == SEC_MINI_A)
+		state->dsec_cmd.args[CX24117_DISEQC_BURST] =
+			CX24117_DISEQC_MINI_A;
+	else if (burst == SEC_MINI_B)
+		state->dsec_cmd.args[CX24117_DISEQC_BURST] =
+			CX24117_DISEQC_MINI_B;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static void cx24117_release(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	dev_dbg(&state->priv->i2c->dev, "%s demod%d\n",
+		__func__, state->demod);
+	if (!atomic_dec_and_test(&state->priv->fe_nr))
+		kfree(state->priv);
+	kfree(state);
+}
+
+static struct dvb_frontend_ops cx24117_ops;
+
+struct dvb_frontend *cx24117_attach(const struct cx24117_config *config,
+	struct i2c_adapter *i2c, struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = NULL;
+	struct cx24117_priv *priv = NULL;
+	int demod = 0;
+
+	/* first frontend attaching */
+	/* allocate shared priv struct */
+	if (fe == NULL) {
+		priv = (struct cx24117_priv*) kzalloc(
+			sizeof(struct cx24117_priv), GFP_KERNEL);
+		if (priv == NULL)
+			goto error1;
+
+		priv->i2c = i2c;
+		priv->demod_address = config->demod_address;
+		mutex_init(&priv->fe_lock);
+	} else {
+		demod = 1;
+		priv = ((struct cx24117_state*) fe->demodulator_priv)->priv;
+	}
+
+	printk("CX24117 attaching frontend %d\n", demod);
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct cx24117_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error2;
+
+	state->demod = demod;
+	state->priv = priv;
+
+	/* test i2c bus for ack */
+	if (demod == 0) {
+		if (cx24117_readreg(state, 0x00) < 0)
+			goto error3;
+	}
+
+	/* nr of frontends using the module */
+	atomic_inc(&priv->fe_nr);
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &cx24117_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error3: kfree(state);
+error2:	kfree(priv);
+error1:	return NULL;
+}
+EXPORT_SYMBOL(cx24117_attach);
+
+/*
+ * Initialise or wake up device
+ *
+ * Power config will reset and load initial firmware if required
+ */
+static int cx24117_initfe(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct cx24117_cmd cmd;
+	int ret;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
+		__func__, state->demod);
+
+	mutex_lock(&state->priv->fe_lock);
+
+	/* Firmware CMD 36: Power config */
+	cmd.args[0] = CMD_TUNERSLEEP;
+	cmd.args[1] = (state->demod ? 1 : 0);
+	cmd.args[2] = 0;
+	cmd.len = 3;
+	ret = cx24117_cmd_execute_nolock(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	ret = cx24117_diseqc_init(fe);
+	if (ret != 0)
+		return ret;
+
+	/* CMD 3C */
+	cmd.args[0] = 0x3c;
+	cmd.args[1] = (state->demod ? 1 : 0);
+	cmd.args[2] = 0x10;
+	cmd.args[3] = 0x10;
+	cmd.len = 4;
+	ret = cx24117_cmd_execute_nolock(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	/* CMD 34 */
+	cmd.args[0] = 0x34;
+	cmd.args[1] = (state->demod ? 1 : 0);
+	cmd.args[2] = CX24117_OCC;
+	cmd.len = 3;
+	ret = cx24117_cmd_execute_nolock(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	mutex_unlock(&state->priv->fe_lock);
+
+	return ret; //cx24117_set_voltage(fe, SEC_VOLTAGE_13);
+}
+
+/*
+ * Put device to sleep
+ */
+static int cx24117_sleep(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct cx24117_cmd cmd;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
+		__func__, state->demod);
+
+	/* Firmware CMD 36: Power config */
+	cmd.args[0] = CMD_TUNERSLEEP;
+	cmd.args[1] = (state->demod ? 1 : 0);
+	cmd.args[2] = 1;
+	cmd.len = 3;
+	return cx24117_cmd_execute(fe, &cmd);
+}
+
+/* dvb-core told us to tune, the tv property cache will be complete,
+ * it's safe for is to pull values and use them for tuning purposes.
+ */
+static int cx24117_set_frontend(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct cx24117_cmd cmd;
+	fe_status_t tunerstat;
+	int i, status, ret, retune = 1;
+	u8 reg_clkdiv, reg_ratediv;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
+		__func__, state->demod);
+
+	switch (c->delivery_system) {
+	case SYS_DVBS:
+		dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S\n",
+			__func__, state->demod);
+
+		/* Only QPSK is supported for DVB-S */
+		if (c->modulation != QPSK) {
+			dev_dbg(&state->priv->i2c->dev,
+				"%s() demod%d unsupported modulation (%d)\n",
+				__func__, state->demod, c->modulation);
+			return -EOPNOTSUPP;
+		}
+
+		/* Pilot doesn't exist in DVB-S, turn bit off */
+		state->dnxt.pilot_val = CX24117_PILOT_OFF;
+
+		/* DVB-S only supports 0.35 */
+		if (c->rolloff != ROLLOFF_35) {
+			dev_dbg(&state->priv->i2c->dev,
+				"%s() demod%d unsupported rolloff (%d)\n",
+				__func__, state->demod, c->rolloff);
+			return -EOPNOTSUPP;
+		}
+		state->dnxt.rolloff_val = CX24117_ROLLOFF_035;
+		break;
+
+	case SYS_DVBS2:
+		dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S2\n",
+			__func__, state->demod);
+
+		/*
+		 * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2,
+		 * but not hardware auto detection
+		 */
+		if (c->modulation != PSK_8 && c->modulation != QPSK) {
+			dev_dbg(&state->priv->i2c->dev, "%s() demod%d"
+				"unsupported modulation (%d)\n",
+				__func__, state->demod, c->modulation);
+			return -EOPNOTSUPP;
+		}
+
+		switch (c->pilot) {
+		case PILOT_AUTO:
+			state->dnxt.pilot_val = CX24117_PILOT_AUTO;
+			break;
+		case PILOT_OFF:
+			state->dnxt.pilot_val = CX24117_PILOT_OFF;
+			break;
+		case PILOT_ON:
+			state->dnxt.pilot_val = CX24117_PILOT_ON;
+			break;
+		default:
+			dev_dbg(&state->priv->i2c->dev,
+				"%s() demod%d unsupported pilot mode (%d)\n",
+				__func__, state->demod, c->pilot);
+			return -EOPNOTSUPP;
+		}
+
+		switch (c->rolloff) {
+		case ROLLOFF_20:
+			state->dnxt.rolloff_val = CX24117_ROLLOFF_020;
+			break;
+		case ROLLOFF_25:
+			state->dnxt.rolloff_val = CX24117_ROLLOFF_025;
+			break;
+		case ROLLOFF_35:
+			state->dnxt.rolloff_val = CX24117_ROLLOFF_035;
+			break;
+		case ROLLOFF_AUTO:
+			state->dnxt.rolloff_val = CX24117_ROLLOFF_035;
+			/* soft-auto rolloff */
+			retune = 3;
+			break;
+		default:
+			dev_warn(&state->priv->i2c->dev,
+				"%s: demod%d unsupported rolloff (%d)\n",
+				KBUILD_MODNAME, state->demod, c->rolloff);
+			return -EOPNOTSUPP;
+		}
+		break;
+
+	default:
+		dev_warn(&state->priv->i2c->dev,
+			"%s: demod %d unsupported delivery system (%d)\n",
+			KBUILD_MODNAME, state->demod, c->delivery_system);
+		return -EOPNOTSUPP;
+	}
+
+	state->dnxt.delsys = c->delivery_system;
+	state->dnxt.modulation = c->modulation;
+	state->dnxt.frequency = c->frequency;
+	state->dnxt.pilot = c->pilot;
+	state->dnxt.rolloff = c->rolloff;
+
+	ret = cx24117_set_inversion(state, c->inversion);
+	if (ret !=  0)
+		return ret;
+
+	ret = cx24117_set_fec(state,
+		c->delivery_system, c->modulation, c->fec_inner);
+	if (ret !=  0)
+		return ret;
+
+	ret = cx24117_set_symbolrate(state, c->symbol_rate);
+	if (ret !=  0)
+		return ret;
+
+	/* discard the 'current' tuning parameters and prepare to tune */
+	cx24117_clone_params(fe);
+
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: delsys      = %d\n", __func__, state->dcur.delsys);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: modulation  = %d\n", __func__, state->dcur.modulation);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: frequency   = %d\n", __func__, state->dcur.frequency);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: pilot       = %d (val = 0x%02x)\n", __func__,
+		state->dcur.pilot, state->dcur.pilot_val);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: retune      = %d\n", __func__, retune);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: rolloff     = %d (val = 0x%02x)\n", __func__,
+		state->dcur.rolloff, state->dcur.rolloff_val);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: FEC         = %d (mask/val = 0x%02x/0x%02x)\n", __func__,
+		state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val);
+	dev_dbg(&state->priv->i2c->dev,
+		"%s: Inversion   = %d (val = 0x%02x)\n", __func__,
+		state->dcur.inversion, state->dcur.inversion_val);
+
+	/* Prepare a tune request */
+	cmd.args[0] = CMD_TUNEREQUEST;
+
+	/* demod */
+	cmd.args[1] = state->demod;
+
+	/* Frequency */
+	cmd.args[2] = (state->dcur.frequency & 0xff0000) >> 16;
+	cmd.args[3] = (state->dcur.frequency & 0x00ff00) >> 8;
+	cmd.args[4] = (state->dcur.frequency & 0x0000ff);
+
+	/* Symbol Rate */
+	cmd.args[5] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8;
+	cmd.args[6] = ((state->dcur.symbol_rate / 1000) & 0x00ff);
+
+	/* Automatic Inversion */
+	cmd.args[7] = state->dcur.inversion_val;
+
+	/* Modulation / FEC / Pilot */
+	cmd.args[8] = state->dcur.fec_val | state->dcur.pilot_val;
+
+	cmd.args[9] = CX24117_SEARCH_RANGE_KHZ >> 8;
+	cmd.args[10] = CX24117_SEARCH_RANGE_KHZ & 0xff;
+
+	cmd.args[11] = state->dcur.rolloff_val;
+	cmd.args[12] = state->dcur.fec_mask;
+
+	if (state->dcur.symbol_rate > 30000000) {
+		reg_ratediv = 0x04;
+		reg_clkdiv = 0x02;
+	} else if (state->dcur.symbol_rate > 10000000) {
+		reg_ratediv = 0x06;
+		reg_clkdiv = 0x03;
+	} else {
+		reg_ratediv = 0x0a;
+		reg_clkdiv = 0x05;
+	}
+
+	cmd.args[13] = reg_ratediv;
+	cmd.args[14] = reg_clkdiv;
+
+	cx24117_writereg(state, (state->demod == 0) ?
+		CX24117_REG_CLKDIV0 : CX24117_REG_CLKDIV1, reg_clkdiv);
+	cx24117_writereg(state, (state->demod == 0) ?
+		CX24117_REG_RATEDIV0 : CX24117_REG_RATEDIV1, reg_ratediv);
+
+	cmd.args[15] = CX24117_PNE;
+	cmd.len = 16;
+
+	do {
+		/* Reset status register */
+		status = cx24117_readreg(state, (state->demod == 0) ?
+			CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1) &
+			CX24117_SIGNAL_MASK;
+
+		dev_dbg(&state->priv->i2c->dev,
+			"%s() demod%d status_setfe = %02x\n",
+			__func__, state->demod, status);
+
+		cx24117_writereg(state, (state->demod == 0) ?
+			CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1, status);
+
+		/* Tune */
+		ret = cx24117_cmd_execute(fe, &cmd);
+		if (ret != 0)
+			break;
+
+		/*
+		 * Wait for up to 500 ms before retrying
+		 *
+		 * If we are able to tune then generally it occurs within 100ms.
+		 * If it takes longer, try a different rolloff setting.
+		 */
+		for (i = 0; i < 50 ; i++) {
+			cx24117_read_status(fe, &tunerstat);
+			status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC);
+			if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) {
+				dev_dbg(&state->priv->i2c->dev,
+					"%s() demod%d tuned\n",
+					__func__, state->demod);
+				return 0;
+			}
+			msleep(10);
+		}
+
+		dev_dbg(&state->priv->i2c->dev, "%s() demod%d not tuned\n",
+			__func__, state->demod);
+
+		/* try next rolloff value */
+		if (state->dcur.rolloff == 3)
+			cmd.args[11]--;
+
+	} while (--retune);
+	return -EINVAL;
+}
+
+static int cx24117_tune(struct dvb_frontend *fe, bool re_tune,
+	unsigned int mode_flags, unsigned int *delay, fe_status_t *status)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+
+	dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
+		__func__, state->demod);
+
+	*delay = HZ / 5;
+	if (re_tune) {
+		int ret = cx24117_set_frontend(fe);
+		if (ret)
+			return ret;
+	}
+	return cx24117_read_status(fe, status);
+}
+
+static int cx24117_get_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_HW;
+}
+
+static int cx24117_get_frontend(struct dvb_frontend *fe)
+{
+	struct cx24117_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct cx24117_cmd cmd;
+	u8 reg, st, inv;
+	int ret, idx;
+	unsigned int freq;
+	short srate_os, freq_os;
+
+	u8 buf[0x1f-4];
+
+	cmd.args[0] = 0x1c;
+	cmd.args[1] = (u8) state->demod;
+	cmd.len = 2;
+	ret = cx24117_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	/* read all required regs at once */
+	reg = (state->demod == 0) ? CX24117_REG_FREQ3_0 : CX24117_REG_FREQ3_1;
+	ret = cx24117_readregN(state, reg, buf, 0x1f-4);
+	if (ret != 0)
+		return ret;
+
+	st = buf[5];
+
+	/* get spectral inversion */
+	inv = (((state->demod == 0) ? ~st : st) >> 6) & 1;
+	if (inv == 0)
+		c->inversion = INVERSION_OFF;
+	else
+		c->inversion = INVERSION_ON;
+
+	/* modulation and fec */
+	idx = st & 0x3f;
+	if (c->delivery_system == SYS_DVBS2) {
+		if (idx > 11)
+			idx += 9;
+		else
+			idx += 7;
+	}
+
+	c->modulation = CX24117_MODFEC_MODES[idx].modulation;
+	c->fec_inner = CX24117_MODFEC_MODES[idx].fec;
+	
+	/* frequency */
+	freq = (buf[0] << 16) | (buf[1] << 8) | buf[2];
+	freq_os = (buf[8] << 8) | buf[9];
+	c->frequency = freq + freq_os;
+
+	/* symbol rate */
+	srate_os = (buf[10] << 8) | buf[11];
+	c->symbol_rate = -1000*srate_os + state->dcur.symbol_rate;
+	return 0;
+}
+
+static struct dvb_frontend_ops cx24117_ops = {
+	.delsys = { SYS_DVBS, SYS_DVBS2 },
+	.info = {
+		.name = "Conexant CX24117/CX24132",
+		.frequency_min = 950000,
+		.frequency_max = 2150000,
+		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
+		.frequency_tolerance = 5000,
+		.symbol_rate_min = 1000000,
+		.symbol_rate_max = 45000000,
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_2G_MODULATION |
+			FE_CAN_QPSK | FE_CAN_RECOVER
+	},
+
+	.release = cx24117_release,
+
+	.init = cx24117_initfe,
+	.sleep = cx24117_sleep,
+	.read_status = cx24117_read_status,
+	.read_ber = cx24117_read_ber,
+	.read_signal_strength = cx24117_read_signal_strength,
+	.read_snr = cx24117_read_snr,
+	.read_ucblocks = cx24117_read_ucblocks,
+	.set_tone = cx24117_set_tone,
+	.set_voltage = cx24117_set_voltage,
+	.diseqc_send_master_cmd = cx24117_send_diseqc_msg,
+	.diseqc_send_burst = cx24117_diseqc_send_burst,
+	.get_frontend_algo = cx24117_get_algo,
+	.tune = cx24117_tune,
+
+	.set_frontend = cx24117_set_frontend,
+	.get_frontend = cx24117_get_frontend,
+};
+
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24117/cx24132 hardware");
+MODULE_AUTHOR("Luis Alves (ljalvs@gmail.com)");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.1");
+MODULE_FIRMWARE(CX24117_DEFAULT_FIRMWARE);
+
diff --git a/drivers/media/dvb-frontends/cx24117.h b/drivers/media/dvb-frontends/cx24117.h
new file mode 100644
index 0000000..fb918f3
--- /dev/null
+++ b/drivers/media/dvb-frontends/cx24117.h
@@ -0,0 +1,47 @@ 
+/*
+    Conexant cx24117/cx24132 - Dual DVBS/S2 Satellite demod/tuner driver
+
+    Copyright (C) 2013 Luis Alves <ljalvs@gmail.com>
+	(based on cx24116.h by Steven Toth)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef CX24117_H
+#define CX24117_H
+
+#include <linux/kconfig.h>
+#include <linux/dvb/frontend.h>
+
+struct cx24117_config {
+	/* the demodulator's i2c address */
+	u8 demod_address;
+};
+
+#if IS_ENABLED(CONFIG_DVB_CX24117)
+extern struct dvb_frontend *cx24117_attach(
+	const struct cx24117_config *config,
+	struct i2c_adapter *i2c, struct dvb_frontend *fe);
+#else
+static inline struct dvb_frontend *cx24117_attach(
+	const struct cx24117_config *config,
+	struct i2c_adapter *i2c, struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif /* CX24117_H */
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
index b3688aa..91b2ed7 100644
--- a/drivers/media/pci/cx23885/Kconfig
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -23,6 +23,7 @@  config VIDEO_CX23885
 	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24117 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 7e923f8..357eb3b 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -259,6 +259,16 @@  struct cx23885_board cx23885_boards[] = {
 		.name		= "TurboSight TBS 6920",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_TBS_6980] = {
+		.name		= "TurboSight TBS 6980",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TBS_6981] = {
+		.name		= "TurboSight TBS 6981",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_TEVII_S470] = {
 		.name		= "TeVii S470",
 		.portb		= CX23885_MPEG_DVB,
@@ -698,6 +708,14 @@  struct cx23885_subid cx23885_subids[] = {
 		.subdevice = 0x8888,
 		.card      = CX23885_BOARD_TBS_6920,
 	}, {
+		.subvendor = 0x6980,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6980,
+	}, {
+		.subvendor = 0x6981,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6981,
+	}, {
 		.subvendor = 0xd470,
 		.subdevice = 0x9022,
 		.card      = CX23885_BOARD_TEVII_S470,
@@ -1022,6 +1040,33 @@  static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 			dev->name, tv.model);
 }
 
+/* some TBS cards require init */
+static void tbs_card_init(struct cx23885_dev *dev)
+{
+	int i;
+	const u8 buf[] = {
+		0xe0, 0x06, 0x66, 0x33, 0x65,
+		0x01, 0x17, 0x06, 0xde};
+	
+	switch (dev->board) {
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		cx_set(GP0_IO, 0x00070007);
+		mdelay(1);
+		cx_clear(GP0_IO, 2);
+		mdelay(1);
+		/* send init bitstream */
+		for (i=0; i<9 * 8; i++) {
+			cx_clear(GP0_IO, 7);
+			udelay(100);
+			cx_set(GP0_IO, ((buf[i>>3]>>(7-(i&7)))&1)|4);
+			udelay(100);
+		}
+		cx_set(GP0_IO, 7);
+		break;
+	}
+}
+
 int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 {
 	struct cx23885_tsport *port = priv;
@@ -1224,6 +1269,8 @@  void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x00040004);
 		break;
 	case CX23885_BOARD_TBS_6920:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 	case CX23885_BOARD_PROF_8000:
 		cx_write(MC417_CTL, 0x00000036);
 		cx_write(MC417_OEN, 0x00001000);
@@ -1472,6 +1519,8 @@  int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		if (!enable_885_ir)
 			break;
 		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1515,6 +1564,8 @@  void cx23885_ir_fini(struct cx23885_dev *dev)
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
 		/* sd_ir is a duplicate pointer to the AV Core, just clear it */
 		dev->sd_ir = NULL;
@@ -1560,6 +1611,8 @@  void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		if (dev->sd_ir)
 			cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
 		break;
@@ -1675,6 +1728,16 @@  void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		tbs_card_init(dev);
+		break;
 	case CX23885_BOARD_MYGICA_X8506:
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
@@ -1750,6 +1813,8 @@  void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_MYGICA_X8507:
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_AVERMEDIA_HC81R:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 9c5ed10..bfb7e33 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -51,6 +51,7 @@ 
 #include "stv6110.h"
 #include "lnbh24.h"
 #include "cx24116.h"
+#include "cx24117.h"
 #include "cimax2.h"
 #include "lgs8gxx.h"
 #include "netup-eeprom.h"
@@ -468,6 +469,10 @@  static struct cx24116_config tbs_cx24116_config = {
 	.demod_address = 0x55,
 };
 
+static struct cx24117_config tbs_cx24117_config = {
+	.demod_address = 0x55,
+};
+
 static struct ds3000_config tevii_ds3000_config = {
 	.demod_address = 0x68,
 };
@@ -1027,6 +1032,32 @@  static int dvb_register(struct cx23885_tsport *port)
 			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 
 		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		i2c_bus = &dev->i2c_bus[1];
+
+		switch (port->nr) {
+		/* PORT B */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap, NULL);
+			break;
+		/* PORT C */
+		case 2:
+			/* use fe1 pointer as temporary holder */
+			/* for the first frontend */
+			fe1 = videobuf_dvb_get_frontend(
+				&port->dev->ts1.frontends, 1);
+
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap, fe1->dvb.frontend);
+			/* we're done, so clear fe1 pointer */
+			fe1 = NULL;
+			break;
+		}
+		break;
 	case CX23885_BOARD_TEVII_S470:
 		i2c_bus = &dev->i2c_bus[1];
 
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index 7875dfb..8a49e7c 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -90,6 +90,8 @@  void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		/*
 		 * The only boards we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar
@@ -168,6 +170,8 @@  static int cx23885_input_ir_start(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.
@@ -298,6 +302,14 @@  int cx23885_input_init(struct cx23885_dev *dev)
 		/* A guess at the remote */
 		rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
 		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_BIT_ALL;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TBS_NEC;
+		break;
 	default:
 		return -ENODEV;
 	}
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index 5687d3f..ebcc63e 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -93,6 +93,8 @@ 
 #define CX23885_BOARD_PROF_8000                37
 #define CX23885_BOARD_HAUPPAUGE_HVR4400        38
 #define CX23885_BOARD_AVERMEDIA_HC81R          39
+#define CX23885_BOARD_TBS_6981                 40
+#define CX23885_BOARD_TBS_6980                 41
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002