@@ -26,6 +26,7 @@
#include <media/v4l2-ioctl.h>
#include <media/v4l2-ctrls.h>
#include "radio-isa.h"
+#include "lm7000.h"
MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
MODULE_DESCRIPTION("A driver for the Aztech radio card.");
@@ -54,18 +55,29 @@ struct aztech {
int curvol;
};
-static void send_0_byte(struct aztech *az)
-{
- udelay(radio_wait_time);
- outb_p(2 + az->curvol, az->isa.io);
- outb_p(64 + 2 + az->curvol, az->isa.io);
-}
+/* bit definitions for register read */
+#define AZTECH_BIT_NOT_TUNED (1 << 0)
+#define AZTECH_BIT_MONO (1 << 1)
+/* bit definitions for register write */
+#define AZTECH_BIT_TUN_CE (1 << 1)
+#define AZTECH_BIT_TUN_CLK (1 << 6)
+#define AZTECH_BIT_TUN_DATA (1 << 7)
+/* bits 0 and 2 are volume control, bits 3..5 are not connected */
-static void send_1_byte(struct aztech *az)
+static void aztech_set_pins(void *handle, u8 pins)
{
- udelay(radio_wait_time);
- outb_p(128 + 2 + az->curvol, az->isa.io);
- outb_p(128 + 64 + 2 + az->curvol, az->isa.io);
+ struct radio_isa_card *isa = handle;
+ struct aztech *az = container_of(isa, struct aztech, isa);
+ u8 bits = az->curvol;
+
+ if (pins & LM7000_DATA)
+ bits |= AZTECH_BIT_TUN_DATA;
+ if (pins & LM7000_CLK)
+ bits |= AZTECH_BIT_TUN_CLK;
+ if (pins & LM7000_CE)
+ bits |= AZTECH_BIT_TUN_CE;
+
+ outb_p(bits, az->isa.io);
}
static struct radio_isa_card *aztech_alloc(void)
@@ -77,39 +89,7 @@ static struct radio_isa_card *aztech_alloc(void)
static int aztech_s_frequency(struct radio_isa_card *isa, u32 freq)
{
- struct aztech *az = container_of(isa, struct aztech, isa);
- int i;
-
- freq += 171200; /* Add 10.7 MHz IF */
- freq /= 800; /* Convert to 50 kHz units */
-
- send_0_byte(az); /* 0: LSB of frequency */
-
- for (i = 0; i < 13; i++) /* : frequency bits (1-13) */
- if (freq & (1 << i))
- send_1_byte(az);
- else
- send_0_byte(az);
-
- send_0_byte(az); /* 14: test bit - always 0 */
- send_0_byte(az); /* 15: test bit - always 0 */
- send_0_byte(az); /* 16: band data 0 - always 0 */
- if (isa->stereo) /* 17: stereo (1 to enable) */
- send_1_byte(az);
- else
- send_0_byte(az);
-
- send_1_byte(az); /* 18: band data 1 - unknown */
- send_0_byte(az); /* 19: time base - always 0 */
- send_0_byte(az); /* 20: spacing (0 = 25 kHz) */
- send_1_byte(az); /* 21: spacing (1 = 25 kHz) */
- send_0_byte(az); /* 22: spacing (0 = 25 kHz) */
- send_1_byte(az); /* 23: AM/FM (FM = 1, always) */
-
- /* latch frequency */
-
- udelay(radio_wait_time);
- outb_p(128 + 64 + az->curvol, az->isa.io);
+ lm7000_set_freq(freq, isa, aztech_set_pins);
return 0;
}
@@ -165,7 +145,7 @@ static struct radio_isa_driver aztech_driver = {
.radio_nr_params = radio_nr,
.io_ports = aztech_ioports,
.num_of_io_ports = ARRAY_SIZE(aztech_ioports),
- .region_size = 2,
+ .region_size = 8,
.card = "Aztech Radio",
.ops = &aztech_ops,
.has_stereo = true,
Aztech radio card is based on LM7001 chip which is (software) compatible with LM7000. So remove the LM7000-specific code from the driver and use generic code. Also found that the card does not have A0..A2 ISA pins connected, which means that the region size is 8 bytes. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> --- drivers/media/radio/radio-aztech.c | 68 +++++++++++++----------------------- 1 files changed, 24 insertions(+), 44 deletions(-)