| Message ID | 1375866242-18084-4-git-send-email-arun.kk@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 08/07/2013 11:03 AM, Arun Kumar K wrote: > This driver is for the FIMC-IS IP available in Samsung Exynos5 > SoC onwards. This patch adds the core files for the new driver. > > Signed-off-by: Arun Kumar K<arun.kk@samsung.com> > Signed-off-by: Kilyeon Im<kilyeon.im@samsung.com> > --- > drivers/media/platform/exynos5-is/fimc-is-core.c | 413 ++++++++++++++++++++++ > drivers/media/platform/exynos5-is/fimc-is-core.h | 134 +++++++ > 2 files changed, 547 insertions(+) > create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.c > create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.h > > diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.c b/drivers/media/platform/exynos5-is/fimc-is-core.c > new file mode 100644 > index 0000000..067dea6 > --- /dev/null > +++ b/drivers/media/platform/exynos5-is/fimc-is-core.c > @@ -0,0 +1,413 @@ > +/* > + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver > +* > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > + * Arun Kumar K<arun.kk@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include<linux/bug.h> > +#include<linux/ctype.h> > +#include<linux/device.h> > +#include<linux/debugfs.h> > +#include<linux/delay.h> > +#include<linux/errno.h> > +#include<linux/err.h> > +#include<linux/firmware.h> > +#include<linux/fs.h> > +#include<linux/gpio.h> > +#include<linux/interrupt.h> > +#include<linux/kernel.h> > +#include<linux/list.h> > +#include<linux/module.h> > +#include<linux/types.h> > +#include<linux/platform_device.h> > +#include<linux/pm_runtime.h> > +#include<linux/slab.h> > +#include<linux/videodev2.h> > +#include<linux/of.h> > +#include<linux/of_gpio.h> > +#include<linux/of_address.h> > +#include<linux/of_platform.h> > +#include<linux/of_irq.h> > +#include<linux/pinctrl/consumer.h> nit: some entries are not in alphabetical order > +#include<media/v4l2-device.h> > +#include<media/v4l2-ioctl.h> > +#include<media/v4l2-mem2mem.h> > +#include<media/v4l2-of.h> > +#include<media/videobuf2-core.h> > +#include<media/videobuf2-dma-contig.h> > + > +#include "fimc-is.h" > +#include "fimc-is-i2c.h" > + > +#define CLK_MCU_ISP_DIV0_FREQ (200 * 1000000) > +#define CLK_MCU_ISP_DIV1_FREQ (100 * 1000000) > +#define CLK_ISP_DIV0_FREQ (134 * 1000000) > +#define CLK_ISP_DIV1_FREQ (68 * 1000000) > +#define CLK_ISP_DIVMPWM_FREQ (34 * 1000000) > + > +static char *fimc_is_clock_name[] = { static const * char const fimc_is_clock_name[] ? > + [IS_CLK_ISP] = "isp", > + [IS_CLK_MCU_ISP] = "mcu_isp", > + [IS_CLK_ISP_DIV0] = "isp_div0", > + [IS_CLK_ISP_DIV1] = "isp_div1", > + [IS_CLK_ISP_DIVMPWM] = "isp_divmpwm", > + [IS_CLK_MCU_ISP_DIV0] = "mcu_isp_div0", > + [IS_CLK_MCU_ISP_DIV1] = "mcu_isp_div1", > +}; > + > +static void fimc_is_put_clocks(struct fimc_is *is) > +{ > + int i; > + > + for (i = 0; i< IS_CLK_MAX_NUM; i++) { > + if (IS_ERR(is->clock[i])) > + continue; > + clk_unprepare(is->clock[i]); > + clk_put(is->clock[i]); > + is->clock[i] = NULL; is->clock[i] = ERR_PTR(-EINVAL); > + } > +} > + > +static int fimc_is_get_clocks(struct fimc_is *is) > +{ > + struct device *dev =&is->pdev->dev; > + int i, ret; > + > + for (i = 0; i< IS_CLK_MAX_NUM; i++) { > + is->clock[i] = clk_get(dev, fimc_is_clock_name[i]); > + if (IS_ERR(is->clock[i])) > + goto err; > + ret = clk_prepare(is->clock[i]); > + if (ret< 0) { > + clk_put(is->clock[i]); > + is->clock[i] = ERR_PTR(-EINVAL); > + goto err; > + } > + } > + return 0; > +err: > + fimc_is_put_clocks(is); > + pr_err("Failed to get clock: %s\n", fimc_is_clock_name[i]); dev_err(dev, "... > + return -ENXIO; > +} > + > +static int fimc_is_configure_clocks(struct fimc_is *is) > +{ > + int i, ret; > + > + for (i = 0; i< IS_CLK_MAX_NUM; i++) > + is->clock[i] = ERR_PTR(-EINVAL); > + > + ret = fimc_is_get_clocks(is); > + if (ret) > + return ret; > + > + /* Set rates */ > + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV0], > + CLK_MCU_ISP_DIV0_FREQ); > + if (ret) > + return ret; > + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV1], > + CLK_MCU_ISP_DIV1_FREQ); > + if (ret) > + return ret; > + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV0], CLK_ISP_DIV0_FREQ); > + if (ret) > + return ret; > + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV1], CLK_ISP_DIV1_FREQ); > + if (ret) > + return ret; > + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIVMPWM], > + CLK_ISP_DIVMPWM_FREQ); > + return ret; > +} > + > +static void fimc_is_pipelines_destroy(struct fimc_is *is) > +{ > + int i; > + > + for (i = 0; i< is->drvdata->num_instance; i++) > + fimc_is_pipeline_destroy(&is->pipeline[i]); > +} > + > +static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int index, > + struct device_node *node) > +{ > + struct fimc_is_sensor *sensor =&is->sensor[index]; > + u32 tmp = 0; > + int ret; > + > + sensor->drvdata = exynos5_is_sensor_get_drvdata(node); > + if (!sensor->drvdata) { > + dev_err(&is->pdev->dev, "no driver data found for: %s\n", > + node->full_name); > + return -EINVAL; > + } > + > + node = v4l2_of_get_next_endpoint(node, NULL); > + if (!node) > + return -ENXIO; > + > + node = v4l2_of_get_remote_port(node); > + if (!node) > + return -ENXIO; > + > + /* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */ > + ret = of_property_read_u32(node, "reg",&tmp); > + if (ret< 0) { > + dev_err(&is->pdev->dev, "reg property not found at: %s\n", > + node->full_name); > + return ret; > + } > + > + sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0; > + return 0; > +} > + > +static int fimc_is_parse_sensor(struct fimc_is *is) > +{ > + struct device_node *i2c_bus, *child; > + int ret, index = 0; > + > + for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) { > + for_each_available_child_of_node(i2c_bus, child) { > + ret = fimc_is_parse_sensor_config(is, index, child); > + > + if (ret< 0 || index>= FIMC_IS_NUM_SENSORS) { > + of_node_put(child); > + return ret; > + } > + index++; > + } > + } > + return 0; > +} > + > +static void *fimc_is_get_drvdata(struct platform_device *pdev); > + > +static int fimc_is_probe(struct platform_device *pdev) > +{ > + struct device *dev =&pdev->dev; > + struct resource *res; > + struct fimc_is *is; > + void __iomem *regs; > + struct device_node *node; > + int irq, ret; > + int i; > + > + dev_dbg(dev, "FIMC-IS Probe Enter\n"); > + > + if (!pdev->dev.of_node) > + return -ENODEV; > + > + is = devm_kzalloc(&pdev->dev, sizeof(*is), GFP_KERNEL); > + if (!is) > + return -ENOMEM; > + > + is->pdev = pdev; > + > + is->drvdata = fimc_is_get_drvdata(pdev); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(regs)) > + return PTR_ERR(regs); > + > + /* Get the PMU base */ > + node = of_get_child_by_name(dev->of_node, "pmu"); I think we should, as Stephen suggested, add the PMU device node and reference it here through a phandle instead. > + if (!node) > + return -ENODEV; > + is->pmu_regs = of_iomap(node, 0); > + if (!is->pmu_regs) > + return -ENOMEM; > + > + irq = irq_of_parse_and_map(dev->of_node, 0); > + if (irq< 0) { > + dev_err(dev, "Failed to get IRQ\n"); > + return irq; > + } > + > + ret = fimc_is_configure_clocks(is); > + if (ret< 0) { > + dev_err(dev, "clocks configuration failed\n"); > + goto err_clk; > + } > + > + platform_set_drvdata(pdev, is); > + pm_runtime_enable(dev); > + > + ret = pm_runtime_get_sync(dev); > + if (ret< 0) > + goto err_pm; > + > + is->alloc_ctx = vb2_dma_contig_init_ctx(dev); > + if (IS_ERR(is->alloc_ctx)) { > + ret = PTR_ERR(is->alloc_ctx); > + goto err_vb; > + } > + > + /* Get IS-sensor contexts */ > + ret = fimc_is_parse_sensor(is); > + if (ret< 0) > + goto err_vb; > + > + /* Initialize FIMC Pipeline */ > + for (i = 0; i< is->drvdata->num_instance; i++) { > + ret = fimc_is_pipeline_init(&is->pipeline[i], i, is); > + if (ret< 0) > + goto err_sd; > + } > + > + /* Initialize FIMC Interface */ > + ret = fimc_is_interface_init(&is->interface, regs, irq); > + if (ret< 0) > + goto err_sd; > + > + pm_runtime_put(dev); > + > + dev_dbg(dev, "FIMC-IS registered successfully\n"); > + > + return 0; > + > +err_sd: > + fimc_is_pipelines_destroy(is); > +err_vb: > + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); > +err_pm: > + pm_runtime_put(dev); > +err_clk: > + fimc_is_put_clocks(is); > + > + return ret; > +} > + > +int fimc_is_clk_enable(struct fimc_is *is) > +{ > + int ret; > + > + ret = clk_enable(is->clock[IS_CLK_ISP]); > + if (ret) > + return ret; > + ret = clk_enable(is->clock[IS_CLK_MCU_ISP]); > + return ret; return clk_enable(is->clock[IS_CLK_MCU_ISP]); > +} > + > +void fimc_is_clk_disable(struct fimc_is *is) > +{ > + clk_disable(is->clock[IS_CLK_ISP]); > + clk_disable(is->clock[IS_CLK_MCU_ISP]); > +} > + > +static int fimc_is_pm_resume(struct device *dev) > +{ > + struct fimc_is *is = dev_get_drvdata(dev); > + int ret; > + > + ret = fimc_is_clk_enable(is); > + if (ret< 0) { > + dev_err(dev, "Could not enable clocks\n"); > + return ret; > + } > + return 0; > +} > + > +static int fimc_is_pm_suspend(struct device *dev) > +{ > + struct fimc_is *is = dev_get_drvdata(dev); > + > + fimc_is_clk_disable(is); > + return 0; > +} > + > +static int fimc_is_runtime_resume(struct device *dev) > +{ > + return fimc_is_pm_resume(dev); > +} > + > +static int fimc_is_runtime_suspend(struct device *dev) > +{ > + return fimc_is_pm_suspend(dev); > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int fimc_is_resume(struct device *dev) > +{ > + /* TODO */ > + return 0; > +} > + > +static int fimc_is_suspend(struct device *dev) > +{ > + /* TODO */ > + return 0; > +} > +#endif /* CONFIG_PM_SLEEP */ > + > +static int fimc_is_remove(struct platform_device *pdev) > +{ > + struct fimc_is *is = platform_get_drvdata(pdev); > + struct device *dev =&pdev->dev; > + > + pm_runtime_disable(dev); > + pm_runtime_set_suspended(dev); > + fimc_is_pipelines_destroy(is); > + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); > + fimc_is_put_clocks(is); > + return 0; > +} > + > +static const struct dev_pm_ops fimc_is_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(fimc_is_suspend, fimc_is_resume) > + SET_RUNTIME_PM_OPS(fimc_is_runtime_suspend, fimc_is_runtime_resume, > + NULL) > +}; > + > +static struct fimc_is_drvdata exynos5250_drvdata = { > + .num_instance = 1, nit: s/num_instance/num_instances ? > + .fw_name = "exynos5_fimc_is_fw.bin", > +}; > + > +static const struct of_device_id exynos5_fimc_is_match[] = { > + { > + .compatible = "samsung,exynos5250-fimc-is", > + .data =&exynos5250_drvdata, > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, exynos5_fimc_is_match); > + > +static void *fimc_is_get_drvdata(struct platform_device *pdev) > +{ > + struct fimc_is_drvdata *driver_data = NULL; > + > + if (pdev->dev.of_node) { > + const struct of_device_id *match; > + match = of_match_node(exynos5_fimc_is_match, > + pdev->dev.of_node); > + if (match) > + driver_data = (struct fimc_is_drvdata *)match->data; > + } > + return driver_data; > +} > + > +static struct platform_driver fimc_is_driver = { > + .probe = fimc_is_probe, > + .remove = fimc_is_remove, > + .driver = { > + .name = FIMC_IS_DRV_NAME, > + .owner = THIS_MODULE, > + .pm =&fimc_is_pm_ops, > + .of_match_table = exynos5_fimc_is_match, > + } > +}; > +module_platform_driver(fimc_is_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Arun Kumar K<arun.kk@samsung.com>"); > +MODULE_DESCRIPTION("Samsung Exynos5 (FIMC-IS) Imaging Subsystem driver"); > diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.h b/drivers/media/platform/exynos5-is/fimc-is-core.h > new file mode 100644 > index 0000000..a0568f1 > --- /dev/null > +++ b/drivers/media/platform/exynos5-is/fimc-is-core.h > @@ -0,0 +1,134 @@ > +/* > + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver > + * > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > + * Arun Kumar K<arun.kk@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +#ifndef FIMC_IS_CORE_H_ > +#define FIMC_IS_CORE_H_ > + > +#include<linux/bug.h> > +#include<linux/clk.h> > +#include<linux/device.h> > +#include<linux/errno.h> > +#include<linux/firmware.h> > +#include<linux/interrupt.h> > +#include<linux/kernel.h> > +#include<linux/list.h> > +#include<linux/module.h> > +#include<linux/types.h> > +#include<linux/platform_device.h> > +#include<linux/pm_runtime.h> > +#include<linux/slab.h> > +#include<linux/videodev2.h> > + nit: unnecessary empty line > +#include<asm/barrier.h> > +#include<linux/sizes.h> > +#include<linux/io.h> > +#include<linux/irqreturn.h> > +#include<linux/platform_device.h> > +#include<linux/sched.h> > +#include<linux/spinlock.h> > + > +#include<media/media-entity.h> > +#include<media/videobuf2-core.h> > +#include<media/v4l2-ctrls.h> > +#include<media/v4l2-device.h> > +#include<media/v4l2-mem2mem.h> > +#include<media/v4l2-mediabus.h> > +#include<media/s5p_fimc.h> nit: some entries are not in alphabetical order > +#define FIMC_IS_DRV_NAME "exynos5-fimc-is" > + > +#define FIMC_IS_COMMAND_TIMEOUT (3 * HZ) > +#define FIMC_IS_STARTUP_TIMEOUT (3 * HZ) > +#define FIMC_IS_SHUTDOWN_TIMEOUT (10 * HZ) > + > +#define FW_SHARED_OFFSET (0x8c0000) > +#define DEBUG_CNT (500 * 1024) > +#define DEBUG_OFFSET (0x840000) > +#define DEBUGCTL_OFFSET (0x8bd000) > +#define DEBUG_FCOUNT (0x8c64c0) > + > +#define FIMC_IS_MAX_INSTANCES 1 > + > +#define FIMC_IS_NUM_SENSORS 2 > +#define FIMC_IS_NUM_PIPELINES 1 > + > +#define FIMC_IS_MAX_PLANES 3 > +#define FIMC_IS_NUM_SCALERS 2 > + > +enum fimc_is_clks { > + IS_CLK_ISP, > + IS_CLK_MCU_ISP, > + IS_CLK_ISP_DIV0, > + IS_CLK_ISP_DIV1, > + IS_CLK_ISP_DIVMPWM, > + IS_CLK_MCU_ISP_DIV0, > + IS_CLK_MCU_ISP_DIV1, > + IS_CLK_MAX_NUM > +}; > + > +/* Video capture states */ > +enum fimc_is_video_state { > + STATE_INIT, > + STATE_BUFS_ALLOCATED, > + STATE_RUNNING, > +}; > + > +enum fimc_is_scaler_id { > + SCALER_SCC, > + SCALER_SCP > +}; > + > +enum fimc_is_sensor_pos { > + SENSOR_CAM0, > + SENSOR_CAM1 > +}; > + > +struct fimc_is_buf { > + struct vb2_buffer vb; > + struct list_head list; > + unsigned int paddr[FIMC_IS_MAX_PLANES]; > +}; > + > +struct fimc_is_memory { > + /* physical base address */ > + dma_addr_t paddr; > + /* virtual base address */ > + void *vaddr; > + /* total length */ > + unsigned int size; > +}; > + > +struct fimc_is_meminfo { > + struct fimc_is_memory fw; > + struct fimc_is_memory shot; > + struct fimc_is_memory region; > + struct fimc_is_memory shared; > +}; > + > +struct fimc_is_drvdata { > + unsigned int num_instance; > + char *fw_name; > +}; > + > +/** > + * struct fimc_is_fmt - the driver's internal color format data > + * @name: format description > + * @fourcc: the fourcc code for this format > + * @depth: number of bytes per pixel > + * @num_planes: number of planes for this color format > + */ > +struct fimc_is_fmt { > + char *name; > + unsigned int fourcc; > + unsigned int depth[FIMC_IS_MAX_PLANES]; > + unsigned int num_planes; > +}; > + > +#endif Otherwise looks good. Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> -- Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sylwester, On Sat, Aug 10, 2013 at 3:44 AM, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> wrote: > Hi, > > > On 08/07/2013 11:03 AM, Arun Kumar K wrote: >> >> This driver is for the FIMC-IS IP available in Samsung Exynos5 >> SoC onwards. This patch adds the core files for the new driver. >> >> Signed-off-by: Arun Kumar K<arun.kk@samsung.com> >> Signed-off-by: Kilyeon Im<kilyeon.im@samsung.com> >> --- >> drivers/media/platform/exynos5-is/fimc-is-core.c | 413 >> ++++++++++++++++++++++ >> drivers/media/platform/exynos5-is/fimc-is-core.h | 134 +++++++ >> 2 files changed, 547 insertions(+) >> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.c >> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.h >> >> diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.c >> b/drivers/media/platform/exynos5-is/fimc-is-core.c >> new file mode 100644 >> index 0000000..067dea6 >> --- /dev/null >> +++ b/drivers/media/platform/exynos5-is/fimc-is-core.c >> @@ -0,0 +1,413 @@ >> +/* >> + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver >> +* >> + * Copyright (C) 2013 Samsung Electronics Co., Ltd. >> + * Arun Kumar K<arun.kk@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include<linux/bug.h> >> +#include<linux/ctype.h> >> +#include<linux/device.h> >> +#include<linux/debugfs.h> >> +#include<linux/delay.h> >> +#include<linux/errno.h> >> +#include<linux/err.h> >> +#include<linux/firmware.h> >> +#include<linux/fs.h> >> +#include<linux/gpio.h> >> +#include<linux/interrupt.h> >> +#include<linux/kernel.h> >> +#include<linux/list.h> >> +#include<linux/module.h> >> +#include<linux/types.h> >> +#include<linux/platform_device.h> >> +#include<linux/pm_runtime.h> >> +#include<linux/slab.h> >> +#include<linux/videodev2.h> >> +#include<linux/of.h> >> +#include<linux/of_gpio.h> >> +#include<linux/of_address.h> >> +#include<linux/of_platform.h> >> +#include<linux/of_irq.h> >> +#include<linux/pinctrl/consumer.h> > > > nit: some entries are not in alphabetical order > > >> +#include<media/v4l2-device.h> >> +#include<media/v4l2-ioctl.h> >> +#include<media/v4l2-mem2mem.h> >> +#include<media/v4l2-of.h> >> +#include<media/videobuf2-core.h> >> +#include<media/videobuf2-dma-contig.h> >> + >> +#include "fimc-is.h" >> +#include "fimc-is-i2c.h" >> + >> +#define CLK_MCU_ISP_DIV0_FREQ (200 * 1000000) >> +#define CLK_MCU_ISP_DIV1_FREQ (100 * 1000000) >> +#define CLK_ISP_DIV0_FREQ (134 * 1000000) >> +#define CLK_ISP_DIV1_FREQ (68 * 1000000) >> +#define CLK_ISP_DIVMPWM_FREQ (34 * 1000000) >> + >> +static char *fimc_is_clock_name[] = { > > > static const * char const fimc_is_clock_name[] ? > Did you mean static const char *fimc_is_clock_name[] ? The one you mentioned is giving syntax error. > >> + [IS_CLK_ISP] = "isp", >> + [IS_CLK_MCU_ISP] = "mcu_isp", >> + [IS_CLK_ISP_DIV0] = "isp_div0", >> + [IS_CLK_ISP_DIV1] = "isp_div1", >> + [IS_CLK_ISP_DIVMPWM] = "isp_divmpwm", >> + [IS_CLK_MCU_ISP_DIV0] = "mcu_isp_div0", >> + [IS_CLK_MCU_ISP_DIV1] = "mcu_isp_div1", >> +}; >> + >> +static void fimc_is_put_clocks(struct fimc_is *is) >> +{ >> + int i; >> + >> + for (i = 0; i< IS_CLK_MAX_NUM; i++) { >> + if (IS_ERR(is->clock[i])) >> + continue; >> + clk_unprepare(is->clock[i]); >> + clk_put(is->clock[i]); >> + is->clock[i] = NULL; > > > is->clock[i] = ERR_PTR(-EINVAL); > >> + } >> +} >> >> + >> +static int fimc_is_get_clocks(struct fimc_is *is) >> +{ >> + struct device *dev =&is->pdev->dev; >> >> + int i, ret; >> + >> + for (i = 0; i< IS_CLK_MAX_NUM; i++) { >> + is->clock[i] = clk_get(dev, fimc_is_clock_name[i]); >> + if (IS_ERR(is->clock[i])) >> + goto err; >> + ret = clk_prepare(is->clock[i]); >> + if (ret< 0) { >> + clk_put(is->clock[i]); >> + is->clock[i] = ERR_PTR(-EINVAL); >> + goto err; >> + } >> + } >> + return 0; >> +err: >> + fimc_is_put_clocks(is); >> + pr_err("Failed to get clock: %s\n", fimc_is_clock_name[i]); > > > dev_err(dev, "... > >> + return -ENXIO; >> +} >> + >> +static int fimc_is_configure_clocks(struct fimc_is *is) >> +{ >> + int i, ret; >> + >> + for (i = 0; i< IS_CLK_MAX_NUM; i++) >> + is->clock[i] = ERR_PTR(-EINVAL); >> + >> + ret = fimc_is_get_clocks(is); >> + if (ret) >> + return ret; >> + >> + /* Set rates */ >> + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV0], >> + CLK_MCU_ISP_DIV0_FREQ); >> + if (ret) >> + return ret; >> + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV1], >> + CLK_MCU_ISP_DIV1_FREQ); >> + if (ret) >> + return ret; >> + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV0], CLK_ISP_DIV0_FREQ); >> + if (ret) >> + return ret; >> + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV1], CLK_ISP_DIV1_FREQ); >> + if (ret) >> + return ret; >> + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIVMPWM], >> + CLK_ISP_DIVMPWM_FREQ); >> + return ret; >> +} >> + >> +static void fimc_is_pipelines_destroy(struct fimc_is *is) >> +{ >> + int i; >> + >> + for (i = 0; i< is->drvdata->num_instance; i++) >> + fimc_is_pipeline_destroy(&is->pipeline[i]); >> +} >> + >> +static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int >> index, >> + struct device_node *node) >> +{ >> + struct fimc_is_sensor *sensor =&is->sensor[index]; >> >> + u32 tmp = 0; >> + int ret; >> + >> + sensor->drvdata = exynos5_is_sensor_get_drvdata(node); >> + if (!sensor->drvdata) { >> + dev_err(&is->pdev->dev, "no driver data found for: %s\n", >> + node->full_name); >> + return -EINVAL; >> + } >> + >> + node = v4l2_of_get_next_endpoint(node, NULL); >> + if (!node) >> + return -ENXIO; >> + >> + node = v4l2_of_get_remote_port(node); >> + if (!node) >> + return -ENXIO; >> + >> + /* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */ >> + ret = of_property_read_u32(node, "reg",&tmp); >> + if (ret< 0) { >> + dev_err(&is->pdev->dev, "reg property not found at: %s\n", >> + node->full_name); >> + return ret; >> + } >> + >> + sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0; >> + return 0; >> +} >> + >> +static int fimc_is_parse_sensor(struct fimc_is *is) >> +{ >> + struct device_node *i2c_bus, *child; >> + int ret, index = 0; >> + >> + for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) { >> + for_each_available_child_of_node(i2c_bus, child) { >> + ret = fimc_is_parse_sensor_config(is, index, >> child); >> + >> + if (ret< 0 || index>= FIMC_IS_NUM_SENSORS) { >> + of_node_put(child); >> + return ret; >> + } >> + index++; >> + } >> + } >> + return 0; >> +} >> + >> +static void *fimc_is_get_drvdata(struct platform_device *pdev); >> + >> +static int fimc_is_probe(struct platform_device *pdev) >> +{ >> + struct device *dev =&pdev->dev; >> >> + struct resource *res; >> + struct fimc_is *is; >> + void __iomem *regs; >> + struct device_node *node; >> + int irq, ret; >> + int i; >> + >> + dev_dbg(dev, "FIMC-IS Probe Enter\n"); >> + >> + if (!pdev->dev.of_node) >> + return -ENODEV; >> + >> + is = devm_kzalloc(&pdev->dev, sizeof(*is), GFP_KERNEL); >> + if (!is) >> + return -ENOMEM; >> + >> + is->pdev = pdev; >> + >> + is->drvdata = fimc_is_get_drvdata(pdev); >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + regs = devm_ioremap_resource(dev, res); >> + if (IS_ERR(regs)) >> + return PTR_ERR(regs); >> + >> + /* Get the PMU base */ >> + node = of_get_child_by_name(dev->of_node, "pmu"); > > > I think we should, as Stephen suggested, add the PMU device node and > reference > it here through a phandle instead. > Ok I will add a pmu node and use its phandle in fimc-is node. > >> + if (!node) >> + return -ENODEV; >> + is->pmu_regs = of_iomap(node, 0); >> + if (!is->pmu_regs) >> + return -ENOMEM; >> + >> + irq = irq_of_parse_and_map(dev->of_node, 0); >> + if (irq< 0) { >> + dev_err(dev, "Failed to get IRQ\n"); >> + return irq; >> + } >> + >> + ret = fimc_is_configure_clocks(is); >> + if (ret< 0) { >> + dev_err(dev, "clocks configuration failed\n"); >> + goto err_clk; >> + } >> + >> + platform_set_drvdata(pdev, is); >> + pm_runtime_enable(dev); >> + >> + ret = pm_runtime_get_sync(dev); >> + if (ret< 0) >> + goto err_pm; >> + >> + is->alloc_ctx = vb2_dma_contig_init_ctx(dev); >> + if (IS_ERR(is->alloc_ctx)) { >> + ret = PTR_ERR(is->alloc_ctx); >> + goto err_vb; >> + } >> + >> + /* Get IS-sensor contexts */ >> + ret = fimc_is_parse_sensor(is); >> + if (ret< 0) >> + goto err_vb; >> + >> + /* Initialize FIMC Pipeline */ >> + for (i = 0; i< is->drvdata->num_instance; i++) { >> + ret = fimc_is_pipeline_init(&is->pipeline[i], i, is); >> + if (ret< 0) >> + goto err_sd; >> + } >> + >> + /* Initialize FIMC Interface */ >> + ret = fimc_is_interface_init(&is->interface, regs, irq); >> + if (ret< 0) >> + goto err_sd; >> + >> + pm_runtime_put(dev); >> + >> + dev_dbg(dev, "FIMC-IS registered successfully\n"); >> + >> + return 0; >> + >> +err_sd: >> + fimc_is_pipelines_destroy(is); >> +err_vb: >> + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); >> +err_pm: >> + pm_runtime_put(dev); >> +err_clk: >> + fimc_is_put_clocks(is); >> + >> + return ret; >> +} >> + >> +int fimc_is_clk_enable(struct fimc_is *is) >> +{ >> + int ret; >> + >> + ret = clk_enable(is->clock[IS_CLK_ISP]); >> + if (ret) >> + return ret; >> + ret = clk_enable(is->clock[IS_CLK_MCU_ISP]); >> + return ret; > > > return clk_enable(is->clock[IS_CLK_MCU_ISP]); > >> +} >> >> + >> +void fimc_is_clk_disable(struct fimc_is *is) >> +{ >> + clk_disable(is->clock[IS_CLK_ISP]); >> + clk_disable(is->clock[IS_CLK_MCU_ISP]); >> +} >> + >> +static int fimc_is_pm_resume(struct device *dev) >> +{ >> + struct fimc_is *is = dev_get_drvdata(dev); >> + int ret; >> + >> + ret = fimc_is_clk_enable(is); >> + if (ret< 0) { >> + dev_err(dev, "Could not enable clocks\n"); >> + return ret; >> + } >> + return 0; >> +} >> + >> +static int fimc_is_pm_suspend(struct device *dev) >> +{ >> + struct fimc_is *is = dev_get_drvdata(dev); >> + >> + fimc_is_clk_disable(is); >> + return 0; >> +} >> + >> +static int fimc_is_runtime_resume(struct device *dev) >> +{ >> + return fimc_is_pm_resume(dev); >> +} >> + >> +static int fimc_is_runtime_suspend(struct device *dev) >> +{ >> + return fimc_is_pm_suspend(dev); >> +} >> + >> +#ifdef CONFIG_PM_SLEEP >> +static int fimc_is_resume(struct device *dev) >> +{ >> + /* TODO */ >> + return 0; >> +} >> + >> +static int fimc_is_suspend(struct device *dev) >> +{ >> + /* TODO */ >> + return 0; >> +} >> +#endif /* CONFIG_PM_SLEEP */ >> + >> +static int fimc_is_remove(struct platform_device *pdev) >> +{ >> + struct fimc_is *is = platform_get_drvdata(pdev); >> + struct device *dev =&pdev->dev; >> >> + >> + pm_runtime_disable(dev); >> + pm_runtime_set_suspended(dev); >> + fimc_is_pipelines_destroy(is); >> + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); >> + fimc_is_put_clocks(is); >> + return 0; >> +} >> + >> +static const struct dev_pm_ops fimc_is_pm_ops = { >> + SET_SYSTEM_SLEEP_PM_OPS(fimc_is_suspend, fimc_is_resume) >> + SET_RUNTIME_PM_OPS(fimc_is_runtime_suspend, >> fimc_is_runtime_resume, >> + NULL) >> +}; >> + >> +static struct fimc_is_drvdata exynos5250_drvdata = { >> + .num_instance = 1, > > > nit: s/num_instance/num_instances ? > > >> + .fw_name = "exynos5_fimc_is_fw.bin", >> +}; >> + >> +static const struct of_device_id exynos5_fimc_is_match[] = { >> + { >> + .compatible = "samsung,exynos5250-fimc-is", >> + .data =&exynos5250_drvdata, >> + }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, exynos5_fimc_is_match); >> + >> +static void *fimc_is_get_drvdata(struct platform_device *pdev) >> +{ >> + struct fimc_is_drvdata *driver_data = NULL; >> + >> + if (pdev->dev.of_node) { >> + const struct of_device_id *match; >> + match = of_match_node(exynos5_fimc_is_match, >> + pdev->dev.of_node); >> + if (match) >> + driver_data = (struct fimc_is_drvdata >> *)match->data; >> + } >> + return driver_data; >> +} >> + >> +static struct platform_driver fimc_is_driver = { >> + .probe = fimc_is_probe, >> + .remove = fimc_is_remove, >> + .driver = { >> + .name = FIMC_IS_DRV_NAME, >> + .owner = THIS_MODULE, >> + .pm =&fimc_is_pm_ops, >> + .of_match_table = exynos5_fimc_is_match, >> + } >> +}; >> +module_platform_driver(fimc_is_driver); >> + >> +MODULE_LICENSE("GPL"); >> +MODULE_AUTHOR("Arun Kumar K<arun.kk@samsung.com>"); >> +MODULE_DESCRIPTION("Samsung Exynos5 (FIMC-IS) Imaging Subsystem driver"); >> diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.h >> b/drivers/media/platform/exynos5-is/fimc-is-core.h >> new file mode 100644 >> index 0000000..a0568f1 >> --- /dev/null >> +++ b/drivers/media/platform/exynos5-is/fimc-is-core.h >> @@ -0,0 +1,134 @@ >> +/* >> + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver >> + * >> + * Copyright (C) 2013 Samsung Electronics Co., Ltd. >> + * Arun Kumar K<arun.kk@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> +#ifndef FIMC_IS_CORE_H_ >> +#define FIMC_IS_CORE_H_ >> + >> +#include<linux/bug.h> >> +#include<linux/clk.h> >> +#include<linux/device.h> >> +#include<linux/errno.h> >> +#include<linux/firmware.h> >> +#include<linux/interrupt.h> >> +#include<linux/kernel.h> >> +#include<linux/list.h> >> +#include<linux/module.h> >> +#include<linux/types.h> >> +#include<linux/platform_device.h> >> +#include<linux/pm_runtime.h> >> +#include<linux/slab.h> >> +#include<linux/videodev2.h> >> + > > > nit: unnecessary empty line > > >> +#include<asm/barrier.h> >> +#include<linux/sizes.h> >> +#include<linux/io.h> >> +#include<linux/irqreturn.h> >> +#include<linux/platform_device.h> >> +#include<linux/sched.h> >> +#include<linux/spinlock.h> >> + >> +#include<media/media-entity.h> >> +#include<media/videobuf2-core.h> >> +#include<media/v4l2-ctrls.h> >> +#include<media/v4l2-device.h> >> +#include<media/v4l2-mem2mem.h> >> +#include<media/v4l2-mediabus.h> >> +#include<media/s5p_fimc.h> > > > nit: some entries are not in alphabetical order > > >> +#define FIMC_IS_DRV_NAME "exynos5-fimc-is" >> + >> +#define FIMC_IS_COMMAND_TIMEOUT (3 * HZ) >> +#define FIMC_IS_STARTUP_TIMEOUT (3 * HZ) >> +#define FIMC_IS_SHUTDOWN_TIMEOUT (10 * HZ) >> + >> +#define FW_SHARED_OFFSET (0x8c0000) >> +#define DEBUG_CNT (500 * 1024) >> +#define DEBUG_OFFSET (0x840000) >> +#define DEBUGCTL_OFFSET (0x8bd000) >> +#define DEBUG_FCOUNT (0x8c64c0) >> + >> +#define FIMC_IS_MAX_INSTANCES 1 >> + >> +#define FIMC_IS_NUM_SENSORS 2 >> +#define FIMC_IS_NUM_PIPELINES 1 >> + >> +#define FIMC_IS_MAX_PLANES 3 >> +#define FIMC_IS_NUM_SCALERS 2 >> + >> +enum fimc_is_clks { >> + IS_CLK_ISP, >> + IS_CLK_MCU_ISP, >> + IS_CLK_ISP_DIV0, >> + IS_CLK_ISP_DIV1, >> + IS_CLK_ISP_DIVMPWM, >> + IS_CLK_MCU_ISP_DIV0, >> + IS_CLK_MCU_ISP_DIV1, >> + IS_CLK_MAX_NUM >> +}; >> + >> +/* Video capture states */ >> +enum fimc_is_video_state { >> + STATE_INIT, >> + STATE_BUFS_ALLOCATED, >> + STATE_RUNNING, >> +}; >> + >> +enum fimc_is_scaler_id { >> + SCALER_SCC, >> + SCALER_SCP >> +}; >> + >> +enum fimc_is_sensor_pos { >> + SENSOR_CAM0, >> + SENSOR_CAM1 >> +}; >> + >> +struct fimc_is_buf { >> + struct vb2_buffer vb; >> + struct list_head list; >> + unsigned int paddr[FIMC_IS_MAX_PLANES]; >> +}; >> + >> +struct fimc_is_memory { >> + /* physical base address */ >> + dma_addr_t paddr; >> + /* virtual base address */ >> + void *vaddr; >> + /* total length */ >> + unsigned int size; >> +}; >> + >> +struct fimc_is_meminfo { >> + struct fimc_is_memory fw; >> + struct fimc_is_memory shot; >> + struct fimc_is_memory region; >> + struct fimc_is_memory shared; >> +}; >> + >> +struct fimc_is_drvdata { >> + unsigned int num_instance; >> + char *fw_name; >> +}; >> + >> +/** >> + * struct fimc_is_fmt - the driver's internal color format data >> + * @name: format description >> + * @fourcc: the fourcc code for this format >> + * @depth: number of bytes per pixel >> + * @num_planes: number of planes for this color format >> + */ >> +struct fimc_is_fmt { >> + char *name; >> + unsigned int fourcc; >> + unsigned int depth[FIMC_IS_MAX_PLANES]; >> + unsigned int num_planes; >> +}; >> + >> +#endif > > > Otherwise looks good. > > Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > Thanks & Regards Arun -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.c b/drivers/media/platform/exynos5-is/fimc-is-core.c new file mode 100644 index 0000000..067dea6 --- /dev/null +++ b/drivers/media/platform/exynos5-is/fimc-is-core.c @@ -0,0 +1,413 @@ +/* + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver +* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Arun Kumar K <arun.kk@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bug.h> +#include <linux/ctype.h> +#include <linux/device.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/fs.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/pinctrl/consumer.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-mem2mem.h> +#include <media/v4l2-of.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> + +#include "fimc-is.h" +#include "fimc-is-i2c.h" + +#define CLK_MCU_ISP_DIV0_FREQ (200 * 1000000) +#define CLK_MCU_ISP_DIV1_FREQ (100 * 1000000) +#define CLK_ISP_DIV0_FREQ (134 * 1000000) +#define CLK_ISP_DIV1_FREQ (68 * 1000000) +#define CLK_ISP_DIVMPWM_FREQ (34 * 1000000) + +static char *fimc_is_clock_name[] = { + [IS_CLK_ISP] = "isp", + [IS_CLK_MCU_ISP] = "mcu_isp", + [IS_CLK_ISP_DIV0] = "isp_div0", + [IS_CLK_ISP_DIV1] = "isp_div1", + [IS_CLK_ISP_DIVMPWM] = "isp_divmpwm", + [IS_CLK_MCU_ISP_DIV0] = "mcu_isp_div0", + [IS_CLK_MCU_ISP_DIV1] = "mcu_isp_div1", +}; + +static void fimc_is_put_clocks(struct fimc_is *is) +{ + int i; + + for (i = 0; i < IS_CLK_MAX_NUM; i++) { + if (IS_ERR(is->clock[i])) + continue; + clk_unprepare(is->clock[i]); + clk_put(is->clock[i]); + is->clock[i] = NULL; + } +} + +static int fimc_is_get_clocks(struct fimc_is *is) +{ + struct device *dev = &is->pdev->dev; + int i, ret; + + for (i = 0; i < IS_CLK_MAX_NUM; i++) { + is->clock[i] = clk_get(dev, fimc_is_clock_name[i]); + if (IS_ERR(is->clock[i])) + goto err; + ret = clk_prepare(is->clock[i]); + if (ret < 0) { + clk_put(is->clock[i]); + is->clock[i] = ERR_PTR(-EINVAL); + goto err; + } + } + return 0; +err: + fimc_is_put_clocks(is); + pr_err("Failed to get clock: %s\n", fimc_is_clock_name[i]); + return -ENXIO; +} + +static int fimc_is_configure_clocks(struct fimc_is *is) +{ + int i, ret; + + for (i = 0; i < IS_CLK_MAX_NUM; i++) + is->clock[i] = ERR_PTR(-EINVAL); + + ret = fimc_is_get_clocks(is); + if (ret) + return ret; + + /* Set rates */ + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV0], + CLK_MCU_ISP_DIV0_FREQ); + if (ret) + return ret; + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV1], + CLK_MCU_ISP_DIV1_FREQ); + if (ret) + return ret; + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV0], CLK_ISP_DIV0_FREQ); + if (ret) + return ret; + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV1], CLK_ISP_DIV1_FREQ); + if (ret) + return ret; + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIVMPWM], + CLK_ISP_DIVMPWM_FREQ); + return ret; +} + +static void fimc_is_pipelines_destroy(struct fimc_is *is) +{ + int i; + + for (i = 0; i < is->drvdata->num_instance; i++) + fimc_is_pipeline_destroy(&is->pipeline[i]); +} + +static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int index, + struct device_node *node) +{ + struct fimc_is_sensor *sensor = &is->sensor[index]; + u32 tmp = 0; + int ret; + + sensor->drvdata = exynos5_is_sensor_get_drvdata(node); + if (!sensor->drvdata) { + dev_err(&is->pdev->dev, "no driver data found for: %s\n", + node->full_name); + return -EINVAL; + } + + node = v4l2_of_get_next_endpoint(node, NULL); + if (!node) + return -ENXIO; + + node = v4l2_of_get_remote_port(node); + if (!node) + return -ENXIO; + + /* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */ + ret = of_property_read_u32(node, "reg", &tmp); + if (ret < 0) { + dev_err(&is->pdev->dev, "reg property not found at: %s\n", + node->full_name); + return ret; + } + + sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0; + return 0; +} + +static int fimc_is_parse_sensor(struct fimc_is *is) +{ + struct device_node *i2c_bus, *child; + int ret, index = 0; + + for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) { + for_each_available_child_of_node(i2c_bus, child) { + ret = fimc_is_parse_sensor_config(is, index, child); + + if (ret < 0 || index >= FIMC_IS_NUM_SENSORS) { + of_node_put(child); + return ret; + } + index++; + } + } + return 0; +} + +static void *fimc_is_get_drvdata(struct platform_device *pdev); + +static int fimc_is_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct fimc_is *is; + void __iomem *regs; + struct device_node *node; + int irq, ret; + int i; + + dev_dbg(dev, "FIMC-IS Probe Enter\n"); + + if (!pdev->dev.of_node) + return -ENODEV; + + is = devm_kzalloc(&pdev->dev, sizeof(*is), GFP_KERNEL); + if (!is) + return -ENOMEM; + + is->pdev = pdev; + + is->drvdata = fimc_is_get_drvdata(pdev); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* Get the PMU base */ + node = of_get_child_by_name(dev->of_node, "pmu"); + if (!node) + return -ENODEV; + is->pmu_regs = of_iomap(node, 0); + if (!is->pmu_regs) + return -ENOMEM; + + irq = irq_of_parse_and_map(dev->of_node, 0); + if (irq < 0) { + dev_err(dev, "Failed to get IRQ\n"); + return irq; + } + + ret = fimc_is_configure_clocks(is); + if (ret < 0) { + dev_err(dev, "clocks configuration failed\n"); + goto err_clk; + } + + platform_set_drvdata(pdev, is); + pm_runtime_enable(dev); + + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto err_pm; + + is->alloc_ctx = vb2_dma_contig_init_ctx(dev); + if (IS_ERR(is->alloc_ctx)) { + ret = PTR_ERR(is->alloc_ctx); + goto err_vb; + } + + /* Get IS-sensor contexts */ + ret = fimc_is_parse_sensor(is); + if (ret < 0) + goto err_vb; + + /* Initialize FIMC Pipeline */ + for (i = 0; i < is->drvdata->num_instance; i++) { + ret = fimc_is_pipeline_init(&is->pipeline[i], i, is); + if (ret < 0) + goto err_sd; + } + + /* Initialize FIMC Interface */ + ret = fimc_is_interface_init(&is->interface, regs, irq); + if (ret < 0) + goto err_sd; + + pm_runtime_put(dev); + + dev_dbg(dev, "FIMC-IS registered successfully\n"); + + return 0; + +err_sd: + fimc_is_pipelines_destroy(is); +err_vb: + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); +err_pm: + pm_runtime_put(dev); +err_clk: + fimc_is_put_clocks(is); + + return ret; +} + +int fimc_is_clk_enable(struct fimc_is *is) +{ + int ret; + + ret = clk_enable(is->clock[IS_CLK_ISP]); + if (ret) + return ret; + ret = clk_enable(is->clock[IS_CLK_MCU_ISP]); + return ret; +} + +void fimc_is_clk_disable(struct fimc_is *is) +{ + clk_disable(is->clock[IS_CLK_ISP]); + clk_disable(is->clock[IS_CLK_MCU_ISP]); +} + +static int fimc_is_pm_resume(struct device *dev) +{ + struct fimc_is *is = dev_get_drvdata(dev); + int ret; + + ret = fimc_is_clk_enable(is); + if (ret < 0) { + dev_err(dev, "Could not enable clocks\n"); + return ret; + } + return 0; +} + +static int fimc_is_pm_suspend(struct device *dev) +{ + struct fimc_is *is = dev_get_drvdata(dev); + + fimc_is_clk_disable(is); + return 0; +} + +static int fimc_is_runtime_resume(struct device *dev) +{ + return fimc_is_pm_resume(dev); +} + +static int fimc_is_runtime_suspend(struct device *dev) +{ + return fimc_is_pm_suspend(dev); +} + +#ifdef CONFIG_PM_SLEEP +static int fimc_is_resume(struct device *dev) +{ + /* TODO */ + return 0; +} + +static int fimc_is_suspend(struct device *dev) +{ + /* TODO */ + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static int fimc_is_remove(struct platform_device *pdev) +{ + struct fimc_is *is = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + fimc_is_pipelines_destroy(is); + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); + fimc_is_put_clocks(is); + return 0; +} + +static const struct dev_pm_ops fimc_is_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fimc_is_suspend, fimc_is_resume) + SET_RUNTIME_PM_OPS(fimc_is_runtime_suspend, fimc_is_runtime_resume, + NULL) +}; + +static struct fimc_is_drvdata exynos5250_drvdata = { + .num_instance = 1, + .fw_name = "exynos5_fimc_is_fw.bin", +}; + +static const struct of_device_id exynos5_fimc_is_match[] = { + { + .compatible = "samsung,exynos5250-fimc-is", + .data = &exynos5250_drvdata, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos5_fimc_is_match); + +static void *fimc_is_get_drvdata(struct platform_device *pdev) +{ + struct fimc_is_drvdata *driver_data = NULL; + + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(exynos5_fimc_is_match, + pdev->dev.of_node); + if (match) + driver_data = (struct fimc_is_drvdata *)match->data; + } + return driver_data; +} + +static struct platform_driver fimc_is_driver = { + .probe = fimc_is_probe, + .remove = fimc_is_remove, + .driver = { + .name = FIMC_IS_DRV_NAME, + .owner = THIS_MODULE, + .pm = &fimc_is_pm_ops, + .of_match_table = exynos5_fimc_is_match, + } +}; +module_platform_driver(fimc_is_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Arun Kumar K <arun.kk@samsung.com>"); +MODULE_DESCRIPTION("Samsung Exynos5 (FIMC-IS) Imaging Subsystem driver"); diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.h b/drivers/media/platform/exynos5-is/fimc-is-core.h new file mode 100644 index 0000000..a0568f1 --- /dev/null +++ b/drivers/media/platform/exynos5-is/fimc-is-core.h @@ -0,0 +1,134 @@ +/* + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Arun Kumar K <arun.kk@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef FIMC_IS_CORE_H_ +#define FIMC_IS_CORE_H_ + +#include <linux/bug.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/firmware.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/videodev2.h> + +#include <asm/barrier.h> +#include <linux/sizes.h> +#include <linux/io.h> +#include <linux/irqreturn.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/spinlock.h> + +#include <media/media-entity.h> +#include <media/videobuf2-core.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mem2mem.h> +#include <media/v4l2-mediabus.h> +#include <media/s5p_fimc.h> + +#define FIMC_IS_DRV_NAME "exynos5-fimc-is" + +#define FIMC_IS_COMMAND_TIMEOUT (3 * HZ) +#define FIMC_IS_STARTUP_TIMEOUT (3 * HZ) +#define FIMC_IS_SHUTDOWN_TIMEOUT (10 * HZ) + +#define FW_SHARED_OFFSET (0x8c0000) +#define DEBUG_CNT (500 * 1024) +#define DEBUG_OFFSET (0x840000) +#define DEBUGCTL_OFFSET (0x8bd000) +#define DEBUG_FCOUNT (0x8c64c0) + +#define FIMC_IS_MAX_INSTANCES 1 + +#define FIMC_IS_NUM_SENSORS 2 +#define FIMC_IS_NUM_PIPELINES 1 + +#define FIMC_IS_MAX_PLANES 3 +#define FIMC_IS_NUM_SCALERS 2 + +enum fimc_is_clks { + IS_CLK_ISP, + IS_CLK_MCU_ISP, + IS_CLK_ISP_DIV0, + IS_CLK_ISP_DIV1, + IS_CLK_ISP_DIVMPWM, + IS_CLK_MCU_ISP_DIV0, + IS_CLK_MCU_ISP_DIV1, + IS_CLK_MAX_NUM +}; + +/* Video capture states */ +enum fimc_is_video_state { + STATE_INIT, + STATE_BUFS_ALLOCATED, + STATE_RUNNING, +}; + +enum fimc_is_scaler_id { + SCALER_SCC, + SCALER_SCP +}; + +enum fimc_is_sensor_pos { + SENSOR_CAM0, + SENSOR_CAM1 +}; + +struct fimc_is_buf { + struct vb2_buffer vb; + struct list_head list; + unsigned int paddr[FIMC_IS_MAX_PLANES]; +}; + +struct fimc_is_memory { + /* physical base address */ + dma_addr_t paddr; + /* virtual base address */ + void *vaddr; + /* total length */ + unsigned int size; +}; + +struct fimc_is_meminfo { + struct fimc_is_memory fw; + struct fimc_is_memory shot; + struct fimc_is_memory region; + struct fimc_is_memory shared; +}; + +struct fimc_is_drvdata { + unsigned int num_instance; + char *fw_name; +}; + +/** + * struct fimc_is_fmt - the driver's internal color format data + * @name: format description + * @fourcc: the fourcc code for this format + * @depth: number of bytes per pixel + * @num_planes: number of planes for this color format + */ +struct fimc_is_fmt { + char *name; + unsigned int fourcc; + unsigned int depth[FIMC_IS_MAX_PLANES]; + unsigned int num_planes; +}; + +#endif