@@ -29,6 +29,7 @@ config VIDEO_CX23885
select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
@@ -528,11 +528,12 @@ struct cx23885_board cx23885_boards[] = {
} },
},
[CX23885_BOARD_MYGICA_X8507] = {
- .name = "Mygica X8507",
+ .name = "Mygica X8502/X8507 ISDB-T",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
+ .portb = CX23885_MPEG_DVB,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
@@ -1281,7 +1282,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
case CX23885_BOARD_MYGICA_X8507:
/* GPIO-0 (0)Analog / (1)Digital TV */
/* GPIO-1 reset XC5000 */
- /* GPIO-2 reset LGS8GL5 / LGS8G75 */
+ /* GPIO-2 demod reset */
cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
mdelay(100);
@@ -1677,6 +1678,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
break;
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ case CX23885_BOARD_MYGICA_X8507:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
@@ -69,6 +69,7 @@
#include "stb6100_cfg.h"
#include "tda10071.h"
#include "a8293.h"
+#include "mb86a20s.h"
static unsigned int debug;
@@ -492,6 +493,15 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
.if_khz = 5380,
};
+static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
+ .demod_address = 0x10,
+};
+
+static struct xc5000_config mygica_x8507_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 4000,
+};
+
static struct stv090x_config prof_8000_stv090x_config = {
.device = STV0903,
.demod_mode = STV090x_SINGLE,
@@ -548,6 +558,7 @@ static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
}
break;
case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
/* Select Digital TV */
cx23885_gpio_set(dev, GPIO_0);
@@ -1114,6 +1125,20 @@ static int dvb_register(struct cx23885_tsport *port)
}
cx23885_set_frontend_hook(port, fe0->dvb.frontend);
break;
+ case CX23885_BOARD_MYGICA_X8507:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
+ &mygica_x8507_mb86a20s_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &mygica_x8507_xc5000_config);
+ }
+ cx23885_set_frontend_hook(port, fe0->dvb.frontend);
+ break;
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
i2c_bus = &dev->i2c_bus[0];
i2c_bus2 = &dev->i2c_bus[1];