@@ -220,6 +220,22 @@ config VIDEO_RENESAS_VSP1
To compile this driver as a module, choose M here: the module
will be called vsp1.
+config VIDEO_TI_VPE
+ tristate "TI VPE (Video Processing Engine) driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && SOC_DRA7XX
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ default n
+ ---help---
+ Support for the TI VPE(Video Processing Engine) block
+ found on DRA7XX SoC.
+
+config VIDEO_TI_VPE_DEBUG
+ bool "VPE debug messages"
+ depends on VIDEO_TI_VPE
+ ---help---
+ Enable debug messages on VPE driver.
+
endif # V4L_MEM2MEM_DRIVERS
menuconfig V4L_TEST_DRIVERS
@@ -22,6 +22,8 @@ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
+obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe/
+
obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
obj-$(CONFIG_VIDEO_CODA) += coda.o
new file mode 100644
@@ -0,0 +1,5 @@
+obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe.o
+
+ti-vpe-y := vpe.o vpdma.o
+
+ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG
new file mode 100644
@@ -0,0 +1,1775 @@
+/*
+ * TI VPE mem2mem driver, based on the virtual v4l2-mem2mem example driver
+ *
+ * Copyright (c) 2013 Texas Instruments Inc.
+ * David Griego, <dagriego@biglakesoftware.com>
+ * Dale Farnsworth, <dale@farnsworth.org>
+ * Archit Taneja, <archit@ti.com>
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Pawel Osciak, <pawel@osciak.com>
+ * Marek Szyprowski, <m.szyprowski@samsung.com>
+ *
+ * Based on the virtual v4l2-mem2mem example device
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "vpdma.h"
+#include "vpe_regs.h"
+
+#define VPE_MODULE_NAME "vpe"
+
+/* minimum and maximum frame sizes */
+#define MIN_W 128
+#define MIN_H 128
+#define MAX_W 1920
+#define MAX_H 1080
+
+/* required alignments */
+#define S_ALIGN 0 /* multiple of 1 */
+#define H_ALIGN 1 /* multiple of 2 */
+#define W_ALIGN 1 /* multiple of 2 */
+
+/* multiple of 128 bits, line stride, 16 bytes */
+#define L_ALIGN 4
+
+/* flags that indicate a format can be used for capture/output */
+#define VPE_FMT_TYPE_CAPTURE (1 << 0)
+#define VPE_FMT_TYPE_OUTPUT (1 << 1)
+
+/* used as plane indices */
+#define VPE_MAX_PLANES 2
+#define VPE_LUMA 0
+#define VPE_CHROMA 1
+
+/* per m2m context info */
+#define VPE_DEF_BUFS_PER_JOB 1 /* default one buffer per batch job */
+
+/*
+ * each VPE context can need up to 3 config desciptors, 7 input descriptors,
+ * 3 output descriptors, and 10 control descriptors
+ */
+#define VPE_DESC_LIST_SIZE (10 * VPDMA_DTD_DESC_SIZE + \
+ 13 * VPDMA_CFD_CTD_DESC_SIZE)
+
+#define vpe_dbg(vpedev, fmt, arg...) \
+ dev_dbg((vpedev)->v4l2_dev.dev, fmt, ##arg)
+#define vpe_err(vpedev, fmt, arg...) \
+ dev_err((vpedev)->v4l2_dev.dev, fmt, ##arg)
+
+struct vpe_us_coeffs {
+ unsigned short anchor_fid0_c0;
+ unsigned short anchor_fid0_c1;
+ unsigned short anchor_fid0_c2;
+ unsigned short anchor_fid0_c3;
+ unsigned short interp_fid0_c0;
+ unsigned short interp_fid0_c1;
+ unsigned short interp_fid0_c2;
+ unsigned short interp_fid0_c3;
+ unsigned short anchor_fid1_c0;
+ unsigned short anchor_fid1_c1;
+ unsigned short anchor_fid1_c2;
+ unsigned short anchor_fid1_c3;
+ unsigned short interp_fid1_c0;
+ unsigned short interp_fid1_c1;
+ unsigned short interp_fid1_c2;
+ unsigned short interp_fid1_c3;
+};
+
+/*
+ * Default upsampler coefficients
+ */
+static const struct vpe_us_coeffs us_coeffs[] = {
+ {
+ /* Coefficients for progressive input */
+ 0x00C8, 0x0348, 0x0018, 0x3FD8, 0x3FB8, 0x0378, 0x00E8, 0x3FE8,
+ 0x00C8, 0x0348, 0x0018, 0x3FD8, 0x3FB8, 0x0378, 0x00E8, 0x3FE8,
+ },
+};
+
+/*
+ * The port_data structure contains per-port data.
+ */
+struct vpe_port_data {
+ enum vpdma_channel channel; /* VPDMA channel */
+ u8 vb_part; /* plane index for co-panar formats */
+};
+
+/*
+ * Define indices into the port_data tables
+ */
+#define VPE_PORT_LUMA1_IN 0
+#define VPE_PORT_CHROMA1_IN 1
+#define VPE_PORT_LUMA_OUT 8
+#define VPE_PORT_CHROMA_OUT 9
+#define VPE_PORT_RGB_OUT 10
+
+static const struct vpe_port_data port_data[11] = {
+ [VPE_PORT_LUMA1_IN] = {
+ .channel = VPE_CHAN_LUMA1_IN,
+ .vb_part = VPE_LUMA,
+ },
+ [VPE_PORT_CHROMA1_IN] = {
+ .channel = VPE_CHAN_CHROMA1_IN,
+ .vb_part = VPE_CHROMA,
+ },
+ [VPE_PORT_LUMA_OUT] = {
+ .channel = VPE_CHAN_LUMA_OUT,
+ .vb_part = VPE_LUMA,
+ },
+ [VPE_PORT_CHROMA_OUT] = {
+ .channel = VPE_CHAN_CHROMA_OUT,
+ .vb_part = VPE_CHROMA,
+ },
+ [VPE_PORT_RGB_OUT] = {
+ .channel = VPE_CHAN_RGB_OUT,
+ .vb_part = VPE_LUMA,
+ },
+};
+
+
+/* driver info for each of the supported video formats */
+struct vpe_fmt {
+ char *name; /* human-readable name */
+ u32 fourcc; /* standard format identifier */
+ u8 types; /* CAPTURE and/or OUTPUT */
+ u8 coplanar; /* set for unpacked Luma and Chroma */
+ /* vpdma format info for each plane */
+ struct vpdma_data_format const *vpdma_fmt[VPE_MAX_PLANES];
+};
+
+static struct vpe_fmt vpe_formats[] = {
+ {
+ .name = "YUV 422 co-planar",
+ .fourcc = V4L2_PIX_FMT_NV16,
+ .types = VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
+ .coplanar = 1,
+ .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_Y444],
+ &vpdma_yuv_fmts[VPDMA_DATA_FMT_C444],
+ },
+ },
+ {
+ .name = "YUV 420 co-planar",
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .types = VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
+ .coplanar = 1,
+ .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_Y420],
+ &vpdma_yuv_fmts[VPDMA_DATA_FMT_C420],
+ },
+ },
+ {
+ .name = "YUYV 422 packed",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .types = VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
+ .coplanar = 0,
+ .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_YC422],
+ },
+ },
+ {
+ .name = "UYVY 422 packed",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .types = VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
+ .coplanar = 0,
+ .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_CY422],
+ },
+ },
+};
+
+/*
+ * per-queue, driver-specific private data.
+ * there is one source queue and one destination queue for each m2m context.
+ */
+struct vpe_q_data {
+ unsigned int width; /* frame width */
+ unsigned int height; /* frame height */
+ unsigned int bytesperline[VPE_MAX_PLANES]; /* bytes per line in memory */
+ enum v4l2_colorspace colorspace;
+ unsigned int flags;
+ unsigned int sizeimage[VPE_MAX_PLANES]; /* image size in memory */
+ struct v4l2_rect c_rect; /* crop/compose rectangle */
+ struct vpe_fmt *fmt; /* format info */
+};
+
+/* vpe_q_data flag bits */
+#define Q_DATA_FRAME_1D (1 << 0)
+#define Q_DATA_MODE_TILED (1 << 1)
+
+enum {
+ Q_DATA_SRC = 0,
+ Q_DATA_DST = 1,
+};
+
+/* find our format description corresponding to the passed v4l2_format */
+static struct vpe_fmt *find_format(struct v4l2_format *f)
+{
+ struct vpe_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(vpe_formats); k++) {
+ fmt = &vpe_formats[k];
+ if (fmt->fourcc == f->fmt.pix.pixelformat)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+/*
+ * there is one vpe_dev structure in the driver, it is shared by
+ * all instances.
+ */
+struct vpe_dev {
+ struct v4l2_device v4l2_dev;
+ struct video_device vfd;
+ struct v4l2_m2m_dev *m2m_dev;
+
+ atomic_t num_instances; /* count of driver instances */
+ dma_addr_t loaded_mmrs; /* shadow mmrs in device */
+ struct mutex dev_mutex;
+ spinlock_t lock;
+
+ int irq;
+ void __iomem *base;
+
+ struct vb2_alloc_ctx *alloc_ctx;
+ struct vpdma_data *vpdma; /* vpdma data handle */
+};
+
+/*
+ * There is one vpe_ctx structure for each m2m context.
+ */
+struct vpe_ctx {
+ struct v4l2_fh fh;
+ struct vpe_dev *dev;
+ struct v4l2_m2m_ctx *m2m_ctx;
+ struct v4l2_ctrl_handler hdl;
+
+ unsigned int sequence; /* current frame/field seq */
+ unsigned int aborting; /* abort after next irq */
+
+ unsigned int bufs_per_job; /* input buffers per batch */
+ unsigned int bufs_completed; /* bufs done in this batch */
+
+ struct vpe_q_data q_data[2]; /* src & dst queue data */
+ struct vb2_buffer *src_vb;
+ struct vb2_buffer *dst_vb;
+
+ struct vpdma_buf mmr_adb; /* shadow reg addr/data block */
+ struct vpdma_desc_list desc_list; /* DMA descriptor list */
+
+ bool load_mmrs; /* have new shadow reg values */
+};
+
+
+/*
+ * M2M devices get 2 queues.
+ * Return the queue given the type.
+ */
+static struct vpe_q_data *get_q_data(struct vpe_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ switch (type) {
+ case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+ return &ctx->q_data[Q_DATA_SRC];
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
+ return &ctx->q_data[Q_DATA_DST];
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+static u32 read_reg(struct vpe_dev *dev, int offset)
+{
+ return ioread32(dev->base + offset);
+}
+
+static void write_reg(struct vpe_dev *dev, int offset, u32 value)
+{
+ iowrite32(value, dev->base + offset);
+}
+
+/* register field read/write helpers */
+static int get_field(u32 value, u32 mask, int shift)
+{
+ return (value & (mask << shift)) >> shift;
+}
+
+static int read_field_reg(struct vpe_dev *dev, int offset, u32 mask, int shift)
+{
+ return get_field(read_reg(dev, offset), mask, shift);
+}
+
+static void write_field(u32 *valp, u32 field, u32 mask, int shift)
+{
+ u32 val = *valp;
+
+ val &= ~(mask << shift);
+ val |= (field & mask) << shift;
+ *valp = val;
+}
+
+static void write_field_reg(struct vpe_dev *dev, int offset, u32 field,
+ u32 mask, int shift)
+{
+ u32 val = read_reg(dev, offset);
+
+ write_field(&val, field, mask, shift);
+
+ write_reg(dev, offset, val);
+}
+
+/*
+ * DMA address/data block for the shadow registers
+ */
+struct vpe_mmr_adb {
+ struct vpdma_adb_hdr out_fmt_hdr;
+ u32 out_fmt_reg[1];
+ u32 out_fmt_pad[3];
+ struct vpdma_adb_hdr us1_hdr;
+ u32 us1_regs[8];
+ struct vpdma_adb_hdr us2_hdr;
+ u32 us2_regs[8];
+ struct vpdma_adb_hdr us3_hdr;
+ u32 us3_regs[8];
+ struct vpdma_adb_hdr dei_hdr;
+ u32 dei_regs[1];
+ u32 dei_pad[3];
+ struct vpdma_adb_hdr sc_hdr;
+ u32 sc_regs[1];
+ u32 sc_pad[3];
+ struct vpdma_adb_hdr csc_hdr;
+ u32 csc_regs[6];
+ u32 csc_pad[2];
+};
+
+#define VPE_SET_MMR_ADB_HDR(ctx, hdr, regs, offset_a) \
+ VPDMA_SET_MMR_ADB_HDR(ctx->mmr_adb, vpe_mmr_adb, hdr, regs, offset_a)
+/*
+ * Set the headers for all of the address/data block structures.
+ */
+static void init_adb_hdrs(struct vpe_ctx *ctx)
+{
+ VPE_SET_MMR_ADB_HDR(ctx, out_fmt_hdr, out_fmt_reg, VPE_CLK_FORMAT_SELECT);
+ VPE_SET_MMR_ADB_HDR(ctx, us1_hdr, us1_regs, VPE_US1_R0);
+ VPE_SET_MMR_ADB_HDR(ctx, us2_hdr, us2_regs, VPE_US2_R0);
+ VPE_SET_MMR_ADB_HDR(ctx, us3_hdr, us3_regs, VPE_US3_R0);
+ VPE_SET_MMR_ADB_HDR(ctx, dei_hdr, dei_regs, VPE_DEI_FRAME_SIZE);
+ VPE_SET_MMR_ADB_HDR(ctx, sc_hdr, sc_regs, VPE_SC_MP_SC0);
+ VPE_SET_MMR_ADB_HDR(ctx, csc_hdr, csc_regs, VPE_CSC_CSC00);
+};
+
+/*
+ * Enable or disable the VPE clocks
+ */
+static void vpe_set_clock_enable(struct vpe_dev *dev, bool on)
+{
+ u32 val = 0;
+
+ if (on)
+ val = VPE_DATA_PATH_CLK_ENABLE | VPE_VPEDMA_CLK_ENABLE;
+ write_reg(dev, VPE_CLK_ENABLE, val);
+}
+
+static void vpe_top_reset(struct vpe_dev *dev)
+{
+
+ write_field_reg(dev, VPE_CLK_RESET, 1, VPE_DATA_PATH_CLK_RESET_MASK,
+ VPE_DATA_PATH_CLK_RESET_SHIFT);
+
+ usleep_range(100, 150);
+
+ write_field_reg(dev, VPE_CLK_RESET, 0, VPE_DATA_PATH_CLK_RESET_MASK,
+ VPE_DATA_PATH_CLK_RESET_SHIFT);
+}
+
+static void vpe_top_vpdma_reset(struct vpe_dev *dev)
+{
+ write_field_reg(dev, VPE_CLK_RESET, 1, VPE_VPDMA_CLK_RESET_MASK,
+ VPE_VPDMA_CLK_RESET_SHIFT);
+
+ usleep_range(100, 150);
+
+ write_field_reg(dev, VPE_CLK_RESET, 0, VPE_VPDMA_CLK_RESET_MASK,
+ VPE_VPDMA_CLK_RESET_SHIFT);
+}
+
+/*
+ * Load the correct of upsampler coefficients into the shadow MMRs
+ */
+static void set_us_coefficients(struct vpe_ctx *ctx)
+{
+ struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+ u32 *us1_reg = &mmr_adb->us1_regs[0];
+ u32 *us2_reg = &mmr_adb->us2_regs[0];
+ u32 *us3_reg = &mmr_adb->us3_regs[0];
+ const unsigned short *cp, *end_cp;
+
+ cp = &us_coeffs[0].anchor_fid0_c0;
+
+ end_cp = cp + sizeof(us_coeffs[0]) / sizeof(*cp);
+
+ while (cp < end_cp) {
+ write_field(us1_reg, *cp++, VPE_US_C0_MASK, VPE_US_C0_SHIFT);
+ write_field(us1_reg, *cp++, VPE_US_C1_MASK, VPE_US_C1_SHIFT);
+ *us2_reg++ = *us1_reg;
+ *us3_reg++ = *us1_reg++;
+ }
+ ctx->load_mmrs = true;
+}
+
+/*
+ * Set the upsampler config mode and the VPDMA line mode in the shadow MMRs.
+ */
+static void set_cfg_and_line_modes(struct vpe_ctx *ctx)
+{
+ struct vpe_fmt *fmt = ctx->q_data[Q_DATA_SRC].fmt;
+ struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+ u32 *us1_reg0 = &mmr_adb->us1_regs[0];
+ u32 *us2_reg0 = &mmr_adb->us2_regs[0];
+ u32 *us3_reg0 = &mmr_adb->us3_regs[0];
+ int line_mode = 1;
+ int cfg_mode = 1;
+
+ /*
+ * Cfg Mode 0: YUV420 source, enable upsampler, DEI is de-interlacing.
+ * Cfg Mode 1: YUV422 source, disable upsampler, DEI is de-interlacing.
+ */
+
+ if (fmt->fourcc == V4L2_PIX_FMT_NV12) {
+ cfg_mode = 0;
+ line_mode = 0; /* double lines to line buffer */
+ }
+
+ write_field(us1_reg0, cfg_mode, VPE_US_MODE_MASK, VPE_US_MODE_SHIFT);
+ write_field(us2_reg0, cfg_mode, VPE_US_MODE_MASK, VPE_US_MODE_SHIFT);
+ write_field(us3_reg0, cfg_mode, VPE_US_MODE_MASK, VPE_US_MODE_SHIFT);
+
+ /* regs for now */
+ vpdma_set_line_mode(ctx->dev->vpdma, line_mode, VPE_CHAN_CHROMA1_IN);
+
+ /* frame start for input luma */
+ vpdma_set_frame_start_event(ctx->dev->vpdma, VPDMA_FSEVENT_CHANNEL_ACTIVE,
+ VPE_CHAN_LUMA1_IN);
+
+ /* frame start for input chroma */
+ vpdma_set_frame_start_event(ctx->dev->vpdma, VPDMA_FSEVENT_CHANNEL_ACTIVE,
+ VPE_CHAN_CHROMA1_IN);
+
+ ctx->load_mmrs = true;
+}
+
+/*
+ * Set the shadow registers that are modified when the source
+ * format changes.
+ */
+static void set_src_registers(struct vpe_ctx *ctx)
+{
+ set_us_coefficients(ctx);
+}
+
+/*
+ * Set the shadow registers that are modified when the destination
+ * format changes.
+ */
+static void set_dst_registers(struct vpe_ctx *ctx)
+{
+ struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+ struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt;
+ u32 val = 0;
+
+ /* select RGB path when color space conversion is supported in future */
+ if (fmt->fourcc == V4L2_PIX_FMT_RGB24)
+ val |= VPE_RGB_OUT_SELECT | VPE_CSC_SRC_DEI_SCALER;
+ else if (fmt->fourcc == V4L2_PIX_FMT_NV16)
+ val |= VPE_COLOR_SEPARATE_422;
+
+ /* The source of CHR_DS is always the scaler, whether it's used or not */
+ val |= VPE_DS_SRC_DEI_SCALER;
+
+ if (fmt->fourcc != V4L2_PIX_FMT_NV12)
+ val |= VPE_DS_BYPASS;
+
+ mmr_adb->out_fmt_reg[0] = val;
+
+ ctx->load_mmrs = true;
+}
+
+/*
+ * Set the de-interlacer shadow register values
+ */
+static void set_dei_regs_bypass(struct vpe_ctx *ctx)
+{
+ struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+ struct vpe_q_data *s_q_data = &ctx->q_data[Q_DATA_SRC];
+ unsigned int src_h = s_q_data->c_rect.height;
+ unsigned int src_w = s_q_data->c_rect.width;
+ u32 *dei_mmr0 = &mmr_adb->dei_regs[0];
+ u32 val = 0;
+
+ /*
+ * according to TRM, we should set DEI in progressive bypass mode when
+ * the input content is progressive, however, DEI is bypassed correctly
+ * for both progressive and interlace content in interlace bypass mode.
+ * It has been recommended not to use progressive bypass mode.
+ */
+ val = VPE_DEI_INTERLACE_BYPASS;
+
+ val |= (src_h << VPE_DEI_HEIGHT_SHIFT) |
+ (src_w << VPE_DEI_WIDTH_SHIFT) |
+ VPE_DEI_FIELD_FLUSH;
+
+ *dei_mmr0 = val;
+
+ ctx->load_mmrs = true;
+}
+
+static void set_csc_coeff_bypass(struct vpe_ctx *ctx)
+{
+ struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+ u32 *shadow_csc_reg5 = &mmr_adb->csc_regs[5];
+
+ *shadow_csc_reg5 |= VPE_CSC_BYPASS;
+
+ ctx->load_mmrs = true;
+}
+
+static void set_sc_regs_bypass(struct vpe_ctx *ctx)
+{
+ struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+ u32 *sc_reg0 = &mmr_adb->sc_regs[0];
+ u32 val = 0;
+
+ val |= VPE_SC_BYPASS;
+ *sc_reg0 = val;
+
+ ctx->load_mmrs = true;
+}
+
+/*
+ * Set the shadow registers whose values are modified when either the
+ * source or destination format is changed.
+ */
+static int set_srcdst_params(struct vpe_ctx *ctx)
+{
+ ctx->sequence = 0;
+
+ set_cfg_and_line_modes(ctx);
+ set_dei_regs_bypass(ctx);
+ set_csc_coeff_bypass(ctx);
+ set_sc_regs_bypass(ctx);
+
+ return 0;
+}
+
+/*
+ * Return the vpe_ctx structure for a given struct file
+ */
+static struct vpe_ctx *file2ctx(struct file *file)
+{
+ return container_of(file->private_data, struct vpe_ctx, fh);
+}
+
+/*
+ * mem2mem callbacks
+ */
+
+/**
+ * job_ready() - check whether an instance is ready to be scheduled to run
+ */
+static int job_ready(void *priv)
+{
+ struct vpe_ctx *ctx = priv;
+ int needed = ctx->bufs_per_job;
+
+ if (v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) < needed)
+ return 0;
+
+ return 1;
+}
+
+static void job_abort(void *priv)
+{
+ struct vpe_ctx *ctx = priv;
+
+ /* Will cancel the transaction in the next interrupt handler */
+ ctx->aborting = 1;
+}
+
+/*
+ * Lock access to the device
+ */
+static void vpe_lock(void *priv)
+{
+ struct vpe_ctx *ctx = priv;
+ struct vpe_dev *dev = ctx->dev;
+ mutex_lock(&dev->dev_mutex);
+}
+
+static void vpe_unlock(void *priv)
+{
+ struct vpe_ctx *ctx = priv;
+ struct vpe_dev *dev = ctx->dev;
+ mutex_unlock(&dev->dev_mutex);
+}
+
+static void vpe_dump_regs(struct vpe_dev *dev)
+{
+#define DUMPREG(r) vpe_dbg(dev, "%-35s %08x\n", #r, read_reg(dev, VPE_##r))
+
+ vpe_dbg(dev, "VPE Registers:\n");
+
+ DUMPREG(PID);
+ DUMPREG(SYSCONFIG);
+ DUMPREG(INT0_STATUS0_RAW);
+ DUMPREG(INT0_STATUS0);
+ DUMPREG(INT0_ENABLE0);
+ DUMPREG(INT0_STATUS1_RAW);
+ DUMPREG(INT0_STATUS1);
+ DUMPREG(INT0_ENABLE1);
+ DUMPREG(CLK_ENABLE);
+ DUMPREG(CLK_RESET);
+ DUMPREG(CLK_FORMAT_SELECT);
+ DUMPREG(CLK_RANGE_MAP);
+ DUMPREG(US1_R0);
+ DUMPREG(US1_R1);
+ DUMPREG(US1_R2);
+ DUMPREG(US1_R3);
+ DUMPREG(US1_R4);
+ DUMPREG(US1_R5);
+ DUMPREG(US1_R6);
+ DUMPREG(US1_R7);
+ DUMPREG(US2_R0);
+ DUMPREG(US2_R1);
+ DUMPREG(US2_R2);
+ DUMPREG(US2_R3);
+ DUMPREG(US2_R4);
+ DUMPREG(US2_R5);
+ DUMPREG(US2_R6);
+ DUMPREG(US2_R7);
+ DUMPREG(US3_R0);
+ DUMPREG(US3_R1);
+ DUMPREG(US3_R2);
+ DUMPREG(US3_R3);
+ DUMPREG(US3_R4);
+ DUMPREG(US3_R5);
+ DUMPREG(US3_R6);
+ DUMPREG(US3_R7);
+ DUMPREG(DEI_FRAME_SIZE);
+ DUMPREG(MDT_BYPASS);
+ DUMPREG(MDT_SF_THRESHOLD);
+ DUMPREG(EDI_CONFIG);
+ DUMPREG(DEI_EDI_LUT_R0);
+ DUMPREG(DEI_EDI_LUT_R1);
+ DUMPREG(DEI_EDI_LUT_R2);
+ DUMPREG(DEI_EDI_LUT_R3);
+ DUMPREG(DEI_FMD_WINDOW_R0);
+ DUMPREG(DEI_FMD_WINDOW_R1);
+ DUMPREG(DEI_FMD_CONTROL_R0);
+ DUMPREG(DEI_FMD_CONTROL_R1);
+ DUMPREG(DEI_FMD_STATUS_R0);
+ DUMPREG(DEI_FMD_STATUS_R1);
+ DUMPREG(DEI_FMD_STATUS_R2);
+ DUMPREG(SC_MP_SC0);
+ DUMPREG(SC_MP_SC1);
+ DUMPREG(SC_MP_SC2);
+ DUMPREG(SC_MP_SC3);
+ DUMPREG(SC_MP_SC4);
+ DUMPREG(SC_MP_SC5);
+ DUMPREG(SC_MP_SC6);
+ DUMPREG(SC_MP_SC8);
+ DUMPREG(SC_MP_SC9);
+ DUMPREG(SC_MP_SC10);
+ DUMPREG(SC_MP_SC11);
+ DUMPREG(SC_MP_SC12);
+ DUMPREG(SC_MP_SC13);
+ DUMPREG(SC_MP_SC17);
+ DUMPREG(SC_MP_SC18);
+ DUMPREG(SC_MP_SC19);
+ DUMPREG(SC_MP_SC20);
+ DUMPREG(SC_MP_SC21);
+ DUMPREG(SC_MP_SC22);
+ DUMPREG(SC_MP_SC23);
+ DUMPREG(SC_MP_SC24);
+ DUMPREG(SC_MP_SC25);
+ DUMPREG(CSC_CSC00);
+ DUMPREG(CSC_CSC01);
+ DUMPREG(CSC_CSC02);
+ DUMPREG(CSC_CSC03);
+ DUMPREG(CSC_CSC04);
+ DUMPREG(CSC_CSC05);
+#undef DUMPREG
+}
+
+static void add_out_dtd(struct vpe_ctx *ctx, int port)
+{
+ struct vpe_q_data *q_data = &ctx->q_data[Q_DATA_DST];
+ const struct vpe_port_data *p_data = &port_data[port];
+ struct vb2_buffer *vb = ctx->dst_vb;
+ struct v4l2_rect *c_rect = &q_data->c_rect;
+ struct vpe_fmt *fmt = q_data->fmt;
+ const struct vpdma_data_format *vpdma_fmt;
+ int plane = fmt->coplanar ? p_data->vb_part : 0;
+ dma_addr_t dma_addr;
+ u32 flags = 0;
+
+ vpdma_fmt = fmt->vpdma_fmt[plane];
+ dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
+ if (!dma_addr) {
+ vpe_err(ctx->dev,
+ "acquiring output buffer(%d) dma_addr failed\n",
+ port);
+ return;
+ }
+
+ if (q_data->flags & Q_DATA_FRAME_1D)
+ flags |= VPDMA_DATA_FRAME_1D;
+ if (q_data->flags & Q_DATA_MODE_TILED)
+ flags |= VPDMA_DATA_MODE_TILED;
+
+ vpdma_add_out_dtd(&ctx->desc_list, c_rect, vpdma_fmt, dma_addr,
+ p_data->channel, flags);
+}
+
+static void add_in_dtd(struct vpe_ctx *ctx, int port)
+{
+ struct vpe_q_data *q_data = &ctx->q_data[Q_DATA_SRC];
+ const struct vpe_port_data *p_data = &port_data[port];
+ struct vb2_buffer *vb = ctx->src_vb;
+ struct v4l2_rect *c_rect = &q_data->c_rect;
+ struct vpe_fmt *fmt = q_data->fmt;
+ const struct vpdma_data_format *vpdma_fmt;
+ int plane = fmt->coplanar ? p_data->vb_part : 0;
+ int field = 0;
+ dma_addr_t dma_addr;
+ u32 flags = 0;
+
+ vpdma_fmt = fmt->vpdma_fmt[plane];
+
+ dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
+ if (!dma_addr) {
+ vpe_err(ctx->dev,
+ "acquiring input buffer(%d) dma_addr failed\n",
+ port);
+ return;
+ }
+
+ if (q_data->flags & Q_DATA_FRAME_1D)
+ flags |= VPDMA_DATA_FRAME_1D;
+ if (q_data->flags & Q_DATA_MODE_TILED)
+ flags |= VPDMA_DATA_MODE_TILED;
+
+ vpdma_add_in_dtd(&ctx->desc_list, q_data->width, q_data->height,
+ c_rect, vpdma_fmt, dma_addr, p_data->channel, field, flags);
+}
+
+/*
+ * Enable the expected IRQ sources
+ */
+static void enable_irqs(struct vpe_ctx *ctx)
+{
+ write_reg(ctx->dev, VPE_INT0_ENABLE0_SET, VPE_INT0_LIST0_COMPLETE);
+ write_reg(ctx->dev, VPE_INT0_ENABLE1_SET, VPE_DS1_UV_ERROR_INT);
+
+ vpdma_enable_list_complete_irq(ctx->dev->vpdma, 0, true);
+}
+
+static void disable_irqs(struct vpe_ctx *ctx)
+{
+ write_reg(ctx->dev, VPE_INT0_ENABLE0_CLR, 0xffffffff);
+ write_reg(ctx->dev, VPE_INT0_ENABLE1_CLR, 0xffffffff);
+
+ vpdma_enable_list_complete_irq(ctx->dev->vpdma, 0, false);
+}
+
+/* device_run() - prepares and starts the device
+ *
+ * This function is only called when both the source and destination
+ * buffers are in place.
+ */
+static void device_run(void *priv)
+{
+ struct vpe_ctx *ctx = priv;
+ struct vpe_q_data *d_q_data = &ctx->q_data[Q_DATA_DST];
+
+ ctx->src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+ WARN_ON(ctx->src_vb == NULL);
+ ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+ WARN_ON(ctx->dst_vb == NULL);
+
+ /* config descriptors */
+ if (ctx->dev->loaded_mmrs != ctx->mmr_adb.dma_addr || ctx->load_mmrs) {
+ vpdma_map_desc_buf(ctx->dev->vpdma, &ctx->mmr_adb);
+ vpdma_add_cfd_adb(&ctx->desc_list, CFD_MMR_CLIENT, &ctx->mmr_adb);
+ ctx->dev->loaded_mmrs = ctx->mmr_adb.dma_addr;
+ ctx->load_mmrs = false;
+ }
+
+ add_out_dtd(ctx, VPE_PORT_LUMA_OUT);
+ if (d_q_data->fmt->coplanar)
+ add_out_dtd(ctx, VPE_PORT_CHROMA_OUT);
+
+ add_in_dtd(ctx, VPE_PORT_LUMA1_IN);
+ add_in_dtd(ctx, VPE_PORT_CHROMA1_IN);
+
+ /* sync on channel control descriptors for input ports */
+ vpdma_add_sync_on_channel_ctd(&ctx->desc_list, VPE_CHAN_LUMA1_IN);
+ vpdma_add_sync_on_channel_ctd(&ctx->desc_list, VPE_CHAN_CHROMA1_IN);
+
+ /* sync on channel control descriptors for output ports */
+ vpdma_add_sync_on_channel_ctd(&ctx->desc_list, VPE_CHAN_LUMA_OUT);
+ if (d_q_data->fmt->coplanar)
+ vpdma_add_sync_on_channel_ctd(&ctx->desc_list, VPE_CHAN_CHROMA_OUT);
+
+ enable_irqs(ctx);
+
+ vpdma_map_desc_buf(ctx->dev->vpdma, &ctx->desc_list.buf);
+ vpdma_submit_descs(ctx->dev->vpdma, &ctx->desc_list);
+}
+
+static void ds1_uv_error(struct vpe_ctx *ctx)
+{
+ dev_warn(ctx->dev->v4l2_dev.dev,
+ "received downsampler error interrupt\n");
+}
+
+static irqreturn_t vpe_irq(int irq_vpe, void *data)
+{
+ struct vpe_dev *dev = (struct vpe_dev *)data;
+ struct vpe_ctx *ctx;
+ struct vb2_buffer *s_vb, *d_vb;
+ struct v4l2_buffer *s_buf, *d_buf;
+ unsigned long flags;
+ u32 irqst0, irqst1;
+
+ irqst0 = read_reg(dev, VPE_INT0_STATUS0);
+ if (irqst0) {
+ write_reg(dev, VPE_INT0_STATUS0_CLR, irqst0);
+ vpe_dbg(dev, "INT0_STATUS0 = 0x%08x\n", irqst0);
+ }
+
+ irqst1 = read_reg(dev, VPE_INT0_STATUS1);
+ if (irqst1) {
+ write_reg(dev, VPE_INT0_STATUS1_CLR, irqst1);
+ vpe_dbg(dev, "INT0_STATUS1 = 0x%08x\n", irqst1);
+ }
+
+ ctx = v4l2_m2m_get_curr_priv(dev->m2m_dev);
+ if (!ctx) {
+ vpe_err(dev, "instance released before end of transaction\n");
+ goto handled;
+ }
+
+ if (irqst1 & VPE_DS1_UV_ERROR_INT) {
+ irqst1 &= ~VPE_DS1_UV_ERROR_INT;
+ ds1_uv_error(ctx);
+ }
+
+ if (irqst0) {
+ if (irqst0 & VPE_INT0_LIST0_COMPLETE)
+ vpdma_clear_list_stat(ctx->dev->vpdma);
+
+ irqst0 &= ~(VPE_INT0_LIST0_COMPLETE);
+ }
+
+ if (irqst0 | irqst1) {
+ dev_warn(dev->v4l2_dev.dev, "Unexpected interrupt: "
+ "INT0_STATUS0 = 0x%08x, INT0_STATUS1 = 0x%08x\n",
+ irqst0, irqst1);
+ }
+
+ disable_irqs(ctx);
+
+ vpdma_unmap_desc_buf(dev->vpdma, &ctx->desc_list.buf);
+ vpdma_unmap_desc_buf(dev->vpdma, &ctx->mmr_adb);
+
+ vpdma_reset_desc_list(&ctx->desc_list);
+
+ if (ctx->aborting)
+ goto finished;
+
+ s_vb = ctx->src_vb;
+ d_vb = ctx->dst_vb;
+ s_buf = &s_vb->v4l2_buf;
+ d_buf = &d_vb->v4l2_buf;
+
+ d_buf->timestamp = s_buf->timestamp;
+ if (s_buf->flags & V4L2_BUF_FLAG_TIMECODE) {
+ d_buf->flags |= V4L2_BUF_FLAG_TIMECODE;
+ d_buf->timecode = s_buf->timecode;
+ }
+
+ d_buf->sequence = ctx->sequence;
+
+ ctx->sequence++;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ v4l2_m2m_buf_done(s_vb, VB2_BUF_STATE_DONE);
+ v4l2_m2m_buf_done(d_vb, VB2_BUF_STATE_DONE);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ ctx->bufs_completed++;
+ if (ctx->bufs_completed < ctx->bufs_per_job) {
+ device_run(ctx);
+ goto handled;
+ }
+
+finished:
+ vpe_dbg(ctx->dev, "finishing transaction\n");
+ ctx->bufs_completed = 0;
+ v4l2_m2m_job_finish(dev->m2m_dev, ctx->m2m_ctx);
+handled:
+ return IRQ_HANDLED;
+}
+
+/*
+ * video ioctls
+ */
+static int vpe_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ strncpy(cap->driver, VPE_MODULE_NAME, sizeof(cap->driver) - 1);
+ strncpy(cap->card, VPE_MODULE_NAME, sizeof(cap->card) - 1);
+ strlcpy(cap->bus_info, VPE_MODULE_NAME, sizeof(cap->bus_info));
+ cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+ return 0;
+}
+
+static int __enum_fmt(struct v4l2_fmtdesc *f, u32 type)
+{
+ int i, index;
+ struct vpe_fmt *fmt = NULL;
+
+ index = 0;
+ for (i = 0; i < ARRAY_SIZE(vpe_formats); ++i) {
+ if (vpe_formats[i].types & type) {
+ if (index == f->index) {
+ fmt = &vpe_formats[i];
+ break;
+ }
+ index++;
+ }
+ }
+
+ if (!fmt)
+ return -EINVAL;
+
+ strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+ f->pixelformat = fmt->fourcc;
+ return 0;
+}
+
+static int vpe_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (V4L2_TYPE_IS_OUTPUT(f->type))
+ return __enum_fmt(f, VPE_FMT_TYPE_OUTPUT);
+
+ return __enum_fmt(f, VPE_FMT_TYPE_CAPTURE);
+}
+
+static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+ struct vpe_ctx *ctx = file2ctx(file);
+ struct vb2_queue *vq;
+ struct vpe_q_data *q_data;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = get_q_data(ctx, f->type);
+
+ pix->width = q_data->width;
+ pix->height = q_data->height;
+ pix->pixelformat = q_data->fmt->fourcc;
+
+ if (V4L2_TYPE_IS_OUTPUT(f->type)) {
+ pix->colorspace = q_data->colorspace;
+ } else {
+ struct vpe_q_data *s_q_data;
+
+ /* get colorspace from the source queue */
+ s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+
+ pix->colorspace = s_q_data->colorspace;
+ }
+
+ pix->num_planes = q_data->fmt->coplanar ? 2 : 1;
+
+ for (i = 0; i < pix->num_planes; i++) {
+ pix->plane_fmt[i].bytesperline = q_data->bytesperline[i];
+ pix->plane_fmt[i].sizeimage = q_data->sizeimage[i];
+ }
+
+ return 0;
+}
+
+static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
+ struct vpe_fmt *fmt, int type)
+{
+ struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+ struct v4l2_plane_pix_format *plane_fmt;
+ int i;
+
+ if (!fmt || !(fmt->types & type)) {
+ vpe_err(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
+ pix->pixelformat);
+ return -EINVAL;
+ }
+
+ pix->field = V4L2_FIELD_NONE;
+
+ v4l_bound_align_image(&pix->width, MIN_W, MAX_W, W_ALIGN,
+ &pix->height, MIN_H, MAX_H, H_ALIGN,
+ S_ALIGN);
+
+ pix->num_planes = fmt->coplanar ? 2 : 1;
+ pix->pixelformat = fmt->fourcc;
+
+ if (type == VPE_FMT_TYPE_CAPTURE) {
+ struct vpe_q_data *s_q_data;
+
+ /* get colorspace from the source queue */
+ s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+
+ pix->colorspace = s_q_data->colorspace;
+ } else {
+ if (!pix->colorspace)
+ pix->colorspace = V4L2_COLORSPACE_SMPTE240M;
+ }
+
+ for (i = 0; i < pix->num_planes; i++) {
+ int depth;
+
+ plane_fmt = &pix->plane_fmt[i];
+ depth = fmt->vpdma_fmt[i]->depth;
+
+ if (i == VPE_LUMA)
+ plane_fmt->bytesperline =
+ round_up((pix->width * depth) >> 3,
+ 1 << L_ALIGN);
+ else
+ plane_fmt->bytesperline = pix->width;
+
+ plane_fmt->sizeimage =
+ (pix->height * pix->width * depth) >> 3;
+ }
+
+ return 0;
+}
+
+static int vpe_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+ struct vpe_fmt *fmt = find_format(f);
+
+ if (V4L2_TYPE_IS_OUTPUT(f->type))
+ return __vpe_try_fmt(ctx, f, fmt, VPE_FMT_TYPE_OUTPUT);
+ else
+ return __vpe_try_fmt(ctx, f, fmt, VPE_FMT_TYPE_CAPTURE);
+}
+
+static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
+{
+ struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+ struct v4l2_plane_pix_format *plane_fmt;
+ struct vpe_q_data *q_data;
+ struct vb2_queue *vq;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ if (vb2_is_busy(vq)) {
+ vpe_err(ctx->dev, "queue busy\n");
+ return -EBUSY;
+ }
+
+ q_data = get_q_data(ctx, f->type);
+ if (!q_data)
+ return -EINVAL;
+
+ q_data->fmt = find_format(f);
+ q_data->width = pix->width;
+ q_data->height = pix->height;
+ q_data->colorspace = pix->colorspace;
+
+ for (i = 0; i < pix->num_planes; i++) {
+ plane_fmt = &pix->plane_fmt[i];
+
+ q_data->bytesperline[i] = plane_fmt->bytesperline;
+ q_data->sizeimage[i] = plane_fmt->sizeimage;
+ }
+
+ q_data->c_rect.left = 0;
+ q_data->c_rect.top = 0;
+ q_data->c_rect.width = q_data->width;
+ q_data->c_rect.height = q_data->height;
+
+ vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d bpl_y %d",
+ f->type, q_data->width, q_data->height, q_data->fmt->fourcc,
+ q_data->bytesperline[VPE_LUMA]);
+ if (q_data->fmt->coplanar)
+ vpe_dbg(ctx->dev, " bpl_uv %d\n",
+ q_data->bytesperline[VPE_CHROMA]);
+
+ return 0;
+}
+
+static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ int ret;
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ ret = vpe_try_fmt(file, priv, f);
+ if (ret)
+ return ret;
+
+ ret = __vpe_s_fmt(ctx, f);
+ if (ret)
+ return ret;
+
+ if (V4L2_TYPE_IS_OUTPUT(f->type))
+ set_src_registers(ctx);
+ else
+ set_dst_registers(ctx);
+
+ return set_srcdst_params(ctx);
+}
+
+static int vpe_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *reqbufs)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
+}
+
+static int vpe_querybuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
+}
+
+static int vpe_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int vpe_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int vpe_streamon(struct file *file, void *priv, enum v4l2_buf_type type)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
+}
+
+static int vpe_streamoff(struct file *file, void *priv, enum v4l2_buf_type type)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ vpe_dump_regs(ctx->dev);
+ vpdma_dump_regs(ctx->dev->vpdma);
+
+ return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
+}
+
+/*
+ * defines number of buffers/frames a context can process with VPE before
+ * switching to a different context. default value is 1 buffer per context
+ */
+#define V4L2_CID_VPE_BUFS_PER_JOB (V4L2_CID_USER_TI_VPE_BASE + 0)
+
+static int vpe_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct vpe_ctx *ctx =
+ container_of(ctrl->handler, struct vpe_ctx, hdl);
+
+ switch (ctrl->id) {
+ case V4L2_CID_VPE_BUFS_PER_JOB:
+ ctx->bufs_per_job = ctrl->val;
+ break;
+
+ default:
+ vpe_err(ctx->dev, "Invalid control\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops vpe_ctrl_ops = {
+ .s_ctrl = vpe_s_ctrl,
+};
+
+static const struct v4l2_ioctl_ops vpe_ioctl_ops = {
+ .vidioc_querycap = vpe_querycap,
+
+ .vidioc_enum_fmt_vid_cap_mplane = vpe_enum_fmt,
+ .vidioc_g_fmt_vid_cap_mplane = vpe_g_fmt,
+ .vidioc_try_fmt_vid_cap_mplane = vpe_try_fmt,
+ .vidioc_s_fmt_vid_cap_mplane = vpe_s_fmt,
+
+ .vidioc_enum_fmt_vid_out_mplane = vpe_enum_fmt,
+ .vidioc_g_fmt_vid_out_mplane = vpe_g_fmt,
+ .vidioc_try_fmt_vid_out_mplane = vpe_try_fmt,
+ .vidioc_s_fmt_vid_out_mplane = vpe_s_fmt,
+
+ .vidioc_reqbufs = vpe_reqbufs,
+ .vidioc_querybuf = vpe_querybuf,
+
+ .vidioc_qbuf = vpe_qbuf,
+ .vidioc_dqbuf = vpe_dqbuf,
+
+ .vidioc_streamon = vpe_streamon,
+ .vidioc_streamoff = vpe_streamoff,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/*
+ * Queue operations
+ */
+static int vpe_queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ int i;
+ struct vpe_ctx *ctx = vb2_get_drv_priv(vq);
+ struct vpe_q_data *q_data;
+
+ q_data = get_q_data(ctx, vq->type);
+
+ *nplanes = q_data->fmt->coplanar ? 2 : 1;
+
+ for (i = 0; i < *nplanes; i++) {
+ sizes[i] = q_data->sizeimage[i];
+ alloc_ctxs[i] = ctx->dev->alloc_ctx;
+ }
+
+ vpe_dbg(ctx->dev, "get %d buffer(s) of size %d", *nbuffers,
+ sizes[VPE_LUMA]);
+ if (q_data->fmt->coplanar)
+ vpe_dbg(ctx->dev, " and %d\n", sizes[VPE_CHROMA]);
+
+ return 0;
+}
+
+static int vpe_buf_prepare(struct vb2_buffer *vb)
+{
+ struct vpe_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct vpe_q_data *q_data;
+ int i, num_planes;
+
+ vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type);
+
+ q_data = get_q_data(ctx, vb->vb2_queue->type);
+ num_planes = q_data->fmt->coplanar ? 2 : 1;
+
+ for (i = 0; i < num_planes; i++) {
+ if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
+ vpe_err(ctx->dev,
+ "data will not fit into plane (%lu < %lu)\n",
+ vb2_plane_size(vb, i),
+ (long) q_data->sizeimage[i]);
+ return -EINVAL;
+ }
+ }
+
+ for (i = 0; i < num_planes; i++)
+ vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
+
+ return 0;
+}
+
+static void vpe_buf_queue(struct vb2_buffer *vb)
+{
+ struct vpe_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
+}
+
+static void vpe_wait_prepare(struct vb2_queue *q)
+{
+ struct vpe_ctx *ctx = vb2_get_drv_priv(q);
+ vpe_unlock(ctx);
+}
+
+static void vpe_wait_finish(struct vb2_queue *q)
+{
+ struct vpe_ctx *ctx = vb2_get_drv_priv(q);
+ vpe_lock(ctx);
+}
+
+static struct vb2_ops vpe_qops = {
+ .queue_setup = vpe_queue_setup,
+ .buf_prepare = vpe_buf_prepare,
+ .buf_queue = vpe_buf_queue,
+ .wait_prepare = vpe_wait_prepare,
+ .wait_finish = vpe_wait_finish,
+};
+
+static int queue_init(void *priv, struct vb2_queue *src_vq,
+ struct vb2_queue *dst_vq)
+{
+ struct vpe_ctx *ctx = priv;
+ int ret;
+
+ memset(src_vq, 0, sizeof(*src_vq));
+ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+ src_vq->io_modes = VB2_MMAP;
+ src_vq->drv_priv = ctx;
+ src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+ src_vq->ops = &vpe_qops;
+ src_vq->mem_ops = &vb2_dma_contig_memops;
+ src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+
+ ret = vb2_queue_init(src_vq);
+ if (ret)
+ return ret;
+
+ memset(dst_vq, 0, sizeof(*dst_vq));
+ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ dst_vq->io_modes = VB2_MMAP;
+ dst_vq->drv_priv = ctx;
+ dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+ dst_vq->ops = &vpe_qops;
+ dst_vq->mem_ops = &vb2_dma_contig_memops;
+ dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+
+ return vb2_queue_init(dst_vq);
+}
+
+static const struct v4l2_ctrl_config vpe_bufs_per_job = {
+ .ops = &vpe_ctrl_ops,
+ .id = V4L2_CID_VPE_BUFS_PER_JOB,
+ .name = "Buffers Per Transaction",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .def = VPE_DEF_BUFS_PER_JOB,
+ .min = 1,
+ .max = VIDEO_MAX_FRAME,
+ .step = 1,
+};
+
+/*
+ * File operations
+ */
+static int vpe_open(struct file *file)
+{
+ struct vpe_dev *dev = video_drvdata(file);
+ struct vpe_ctx *ctx = NULL;
+ struct vpe_q_data *s_q_data;
+ struct v4l2_ctrl_handler *hdl;
+ int ret;
+
+ vpe_dbg(dev, "vpe_open\n");
+
+ if (!dev->vpdma->ready) {
+ vpe_err(dev, "vpdma firmware not loaded\n");
+ return -ENODEV;
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->dev = dev;
+
+ if (mutex_lock_interruptible(&dev->dev_mutex)) {
+ ret = -ERESTARTSYS;
+ goto free_ctx;
+ }
+
+ ret = vpdma_create_desc_list(&ctx->desc_list, VPE_DESC_LIST_SIZE,
+ VPDMA_LIST_TYPE_NORMAL);
+ if (ret != 0)
+ goto unlock;
+
+ ret = vpdma_alloc_desc_buf(&ctx->mmr_adb, sizeof(struct vpe_mmr_adb));
+ if (ret != 0)
+ goto free_desc_list;
+
+ init_adb_hdrs(ctx);
+
+ v4l2_fh_init(&ctx->fh, video_devdata(file));
+ file->private_data = &ctx->fh;
+
+ hdl = &ctx->hdl;
+ v4l2_ctrl_handler_init(hdl, 1);
+ v4l2_ctrl_new_custom(hdl, &vpe_bufs_per_job, NULL);
+ if (hdl->error) {
+ ret = hdl->error;
+ goto exit_fh;
+ }
+ ctx->fh.ctrl_handler = hdl;
+ v4l2_ctrl_handler_setup(hdl);
+
+ s_q_data = &ctx->q_data[Q_DATA_SRC];
+ s_q_data->fmt = &vpe_formats[2];
+ s_q_data->width = 1920;
+ s_q_data->height = 1080;
+ s_q_data->sizeimage[VPE_LUMA] = (s_q_data->width * s_q_data->height *
+ s_q_data->fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3;
+ s_q_data->colorspace = V4L2_COLORSPACE_SMPTE240M;
+ s_q_data->c_rect.left = 0;
+ s_q_data->c_rect.top = 0;
+ s_q_data->c_rect.width = s_q_data->width;
+ s_q_data->c_rect.height = s_q_data->height;
+ s_q_data->flags = 0;
+
+ ctx->q_data[Q_DATA_DST] = *s_q_data;
+
+ set_src_registers(ctx);
+ set_dst_registers(ctx);
+ ret = set_srcdst_params(ctx);
+ if (ret)
+ goto exit_fh;
+
+ ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
+
+ if (IS_ERR(ctx->m2m_ctx)) {
+ ret = PTR_ERR(ctx->m2m_ctx);
+ goto exit_fh;
+ }
+
+ v4l2_fh_add(&ctx->fh);
+
+ /*
+ * for now, just report the creation of the first instance, we can later
+ * optimize the driver to enable or disable clocks when the first
+ * instance is created or the last instance released
+ */
+ if (atomic_inc_return(&dev->num_instances) == 1)
+ vpe_dbg(dev, "first instance created\n");
+
+ ctx->bufs_per_job = VPE_DEF_BUFS_PER_JOB;
+
+ ctx->load_mmrs = true;
+
+ vpe_dbg(dev, "created instance %p, m2m_ctx: %p\n",
+ ctx, ctx->m2m_ctx);
+
+ mutex_unlock(&dev->dev_mutex);
+
+ return 0;
+exit_fh:
+ v4l2_ctrl_handler_free(hdl);
+ v4l2_fh_exit(&ctx->fh);
+ vpdma_free_desc_buf(&ctx->mmr_adb);
+free_desc_list:
+ vpdma_free_desc_list(&ctx->desc_list);
+unlock:
+ mutex_unlock(&dev->dev_mutex);
+free_ctx:
+ kfree(ctx);
+ return ret;
+}
+
+static int vpe_release(struct file *file)
+{
+ struct vpe_dev *dev = video_drvdata(file);
+ struct vpe_ctx *ctx = file2ctx(file);
+
+ vpe_dbg(dev, "releasing instance %p\n", ctx);
+
+ mutex_lock(&dev->dev_mutex);
+ vpdma_free_desc_list(&ctx->desc_list);
+ vpdma_free_desc_buf(&ctx->mmr_adb);
+
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ v4l2_ctrl_handler_free(&ctx->hdl);
+ v4l2_m2m_ctx_release(ctx->m2m_ctx);
+
+ kfree(ctx);
+
+ /*
+ * for now, just report the release of the last instance, we can later
+ * optimize the driver to enable or disable clocks when the first
+ * instance is created or the last instance released
+ */
+ if (atomic_dec_return(&dev->num_instances) == 0)
+ vpe_dbg(dev, "last instance released\n");
+
+ mutex_unlock(&dev->dev_mutex);
+
+ return 0;
+}
+
+static unsigned int vpe_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+ struct vpe_dev *dev = ctx->dev;
+ int ret;
+
+ mutex_lock(&dev->dev_mutex);
+ ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
+ mutex_unlock(&dev->dev_mutex);
+ return ret;
+}
+
+static int vpe_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+ struct vpe_dev *dev = ctx->dev;
+ int ret;
+
+ if (mutex_lock_interruptible(&dev->dev_mutex))
+ return -ERESTARTSYS;
+ ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
+ mutex_unlock(&dev->dev_mutex);
+ return ret;
+}
+
+static const struct v4l2_file_operations vpe_fops = {
+ .owner = THIS_MODULE,
+ .open = vpe_open,
+ .release = vpe_release,
+ .poll = vpe_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = vpe_mmap,
+};
+
+static struct video_device vpe_videodev = {
+ .name = VPE_MODULE_NAME,
+ .fops = &vpe_fops,
+ .ioctl_ops = &vpe_ioctl_ops,
+ .minor = -1,
+ .release = video_device_release,
+ .vfl_dir = VFL_DIR_M2M,
+};
+
+static struct v4l2_m2m_ops m2m_ops = {
+ .device_run = device_run,
+ .job_ready = job_ready,
+ .job_abort = job_abort,
+ .lock = vpe_lock,
+ .unlock = vpe_unlock,
+};
+
+static int vpe_runtime_get(struct platform_device *pdev)
+{
+ int r;
+
+ dev_dbg(&pdev->dev, "vpe_runtime_get\n");
+
+ r = pm_runtime_get_sync(&pdev->dev);
+ WARN_ON(r < 0);
+ return r < 0 ? r : 0;
+}
+
+static void vpe_runtime_put(struct platform_device *pdev)
+{
+
+ int r;
+
+ dev_dbg(&pdev->dev, "vpe_runtime_put\n");
+
+ r = pm_runtime_put_sync(&pdev->dev);
+ WARN_ON(r < 0 && r != -ENOSYS);
+}
+
+static int vpe_probe(struct platform_device *pdev)
+{
+ struct vpe_dev *dev;
+ struct video_device *vfd;
+ struct resource *res;
+ int ret, irq, func;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ spin_lock_init(&dev->lock);
+
+ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
+ if (ret)
+ return ret;
+
+ atomic_set(&dev->num_instances, 0);
+ mutex_init(&dev->dev_mutex);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vpe_top");
+ /*
+ * HACK: we get resource info from device tree in the form of a list of
+ * VPE sub blocks, the driver currently uses only the base of vpe_top
+ * for register access, the driver should be changed later to access
+ * registers based on the sub block base addresses
+ */
+ dev->base = devm_ioremap(&pdev->dev, res->start, SZ_32K);
+ if (IS_ERR(dev->base)) {
+ ret = PTR_ERR(dev->base);
+ goto v4l2_dev_unreg;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_irq(&pdev->dev, irq, vpe_irq, 0, VPE_MODULE_NAME,
+ dev);
+ if (ret)
+ goto v4l2_dev_unreg;
+
+ platform_set_drvdata(pdev, dev);
+
+ dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
+ if (IS_ERR(dev->alloc_ctx)) {
+ vpe_err(dev, "Failed to alloc vb2 context\n");
+ ret = PTR_ERR(dev->alloc_ctx);
+ goto v4l2_dev_unreg;
+ }
+
+ dev->m2m_dev = v4l2_m2m_init(&m2m_ops);
+ if (IS_ERR(dev->m2m_dev)) {
+ vpe_err(dev, "Failed to init mem2mem device\n");
+ ret = PTR_ERR(dev->m2m_dev);
+ goto rel_ctx;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = vpe_runtime_get(pdev);
+ if (ret)
+ goto rel_m2m;
+
+ /* Perform clk enable followed by reset */
+ vpe_set_clock_enable(dev, 1);
+
+ vpe_top_reset(dev);
+
+ func = read_field_reg(dev, VPE_PID, VPE_PID_FUNC_MASK,
+ VPE_PID_FUNC_SHIFT);
+ vpe_dbg(dev, "VPE PID function %x\n", func);
+
+ vpe_top_vpdma_reset(dev);
+
+ dev->vpdma = vpdma_create(pdev);
+ if (IS_ERR(dev->vpdma))
+ goto runtime_put;
+
+ vfd = &dev->vfd;
+ *vfd = vpe_videodev;
+ vfd->lock = &dev->dev_mutex;
+ vfd->v4l2_dev = &dev->v4l2_dev;
+
+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
+ if (ret) {
+ vpe_err(dev, "Failed to register video device\n");
+ goto runtime_put;
+ }
+
+ video_set_drvdata(vfd, dev);
+ snprintf(vfd->name, sizeof(vfd->name), "%s", vpe_videodev.name);
+ dev_info(dev->v4l2_dev.dev, "Device registered as /dev/video%d\n",
+ vfd->num);
+
+ return 0;
+
+runtime_put:
+ vpe_runtime_put(pdev);
+rel_m2m:
+ pm_runtime_disable(&pdev->dev);
+ v4l2_m2m_release(dev->m2m_dev);
+rel_ctx:
+ vb2_dma_contig_cleanup_ctx(dev->alloc_ctx);
+v4l2_dev_unreg:
+ v4l2_device_unregister(&dev->v4l2_dev);
+
+ return ret;
+}
+
+static int vpe_remove(struct platform_device *pdev)
+{
+ struct vpe_dev *dev =
+ (struct vpe_dev *) platform_get_drvdata(pdev);
+
+ v4l2_info(&dev->v4l2_dev, "Removing " VPE_MODULE_NAME);
+
+ v4l2_m2m_release(dev->m2m_dev);
+ video_unregister_device(&dev->vfd);
+ v4l2_device_unregister(&dev->v4l2_dev);
+ vb2_dma_contig_cleanup_ctx(dev->alloc_ctx);
+
+ vpe_set_clock_enable(dev, 0);
+ vpe_runtime_put(pdev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id vpe_of_match[] = {
+ {
+ .compatible = "ti,vpe",
+ },
+ {},
+};
+#else
+#define vpe_of_match NULL
+#endif
+
+static struct platform_driver vpe_pdrv = {
+ .probe = vpe_probe,
+ .remove = vpe_remove,
+ .driver = {
+ .name = VPE_MODULE_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = vpe_of_match,
+ },
+};
+
+static void __exit vpe_exit(void)
+{
+ platform_driver_unregister(&vpe_pdrv);
+}
+
+static int __init vpe_init(void)
+{
+ return platform_driver_register(&vpe_pdrv);
+}
+
+module_init(vpe_init);
+module_exit(vpe_exit);
+
+MODULE_DESCRIPTION("TI VPE driver");
+MODULE_AUTHOR("Dale Farnsworth, <dale@farnsworth.org>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,496 @@
+/*
+ * Copyright (c) 2013 Texas Instruments Inc.
+ *
+ * David Griego, <dagriego@biglakesoftware.com>
+ * Dale Farnsworth, <dale@farnsworth.org>
+ * Archit Taneja, <archit@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __TI_VPE_REGS_H
+#define __TI_VPE_REGS_H
+
+/* VPE register offsets and field selectors */
+
+/* VPE top level regs */
+#define VPE_PID 0x0000
+#define VPE_PID_MINOR_MASK 0x3f
+#define VPE_PID_MINOR_SHIFT 0
+#define VPE_PID_CUSTOM_MASK 0x03
+#define VPE_PID_CUSTOM_SHIFT 6
+#define VPE_PID_MAJOR_MASK 0x07
+#define VPE_PID_MAJOR_SHIFT 8
+#define VPE_PID_RTL_MASK 0x1f
+#define VPE_PID_RTL_SHIFT 11
+#define VPE_PID_FUNC_MASK 0xfff
+#define VPE_PID_FUNC_SHIFT 16
+#define VPE_PID_SCHEME_MASK 0x03
+#define VPE_PID_SCHEME_SHIFT 30
+
+#define VPE_SYSCONFIG 0x0010
+#define VPE_SYSCONFIG_IDLE_MASK 0x03
+#define VPE_SYSCONFIG_IDLE_SHIFT 2
+#define VPE_SYSCONFIG_STANDBY_MASK 0x03
+#define VPE_SYSCONFIG_STANDBY_SHIFT 4
+#define VPE_FORCE_IDLE_MODE 0
+#define VPE_NO_IDLE_MODE 1
+#define VPE_SMART_IDLE_MODE 2
+#define VPE_SMART_IDLE_WAKEUP_MODE 3
+#define VPE_FORCE_STANDBY_MODE 0
+#define VPE_NO_STANDBY_MODE 1
+#define VPE_SMART_STANDBY_MODE 2
+#define VPE_SMART_STANDBY_WAKEUP_MODE 3
+
+#define VPE_INT0_STATUS0_RAW_SET 0x0020
+#define VPE_INT0_STATUS0_RAW VPE_INT0_STATUS0_RAW_SET
+#define VPE_INT0_STATUS0_CLR 0x0028
+#define VPE_INT0_STATUS0 VPE_INT0_STATUS0_CLR
+#define VPE_INT0_ENABLE0_SET 0x0030
+#define VPE_INT0_ENABLE0 VPE_INT0_ENABLE0_SET
+#define VPE_INT0_ENABLE0_CLR 0x0038
+#define VPE_INT0_LIST0_COMPLETE (1 << 0)
+#define VPE_INT0_LIST0_NOTIFY (1 << 1)
+#define VPE_INT0_LIST1_COMPLETE (1 << 2)
+#define VPE_INT0_LIST1_NOTIFY (1 << 3)
+#define VPE_INT0_LIST2_COMPLETE (1 << 4)
+#define VPE_INT0_LIST2_NOTIFY (1 << 5)
+#define VPE_INT0_LIST3_COMPLETE (1 << 6)
+#define VPE_INT0_LIST3_NOTIFY (1 << 7)
+#define VPE_INT0_LIST4_COMPLETE (1 << 8)
+#define VPE_INT0_LIST4_NOTIFY (1 << 9)
+#define VPE_INT0_LIST5_COMPLETE (1 << 10)
+#define VPE_INT0_LIST5_NOTIFY (1 << 11)
+#define VPE_INT0_LIST6_COMPLETE (1 << 12)
+#define VPE_INT0_LIST6_NOTIFY (1 << 13)
+#define VPE_INT0_LIST7_COMPLETE (1 << 14)
+#define VPE_INT0_LIST7_NOTIFY (1 << 15)
+#define VPE_INT0_DESCRIPTOR (1 << 16)
+#define VPE_DEI_FMD_INT (1 << 18)
+
+#define VPE_INT0_STATUS1_RAW_SET 0x0024
+#define VPE_INT0_STATUS1_RAW VPE_INT0_STATUS1_RAW_SET
+#define VPE_INT0_STATUS1_CLR 0x002c
+#define VPE_INT0_STATUS1 VPE_INT0_STATUS1_CLR
+#define VPE_INT0_ENABLE1_SET 0x0034
+#define VPE_INT0_ENABLE1 VPE_INT0_ENABLE1_SET
+#define VPE_INT0_ENABLE1_CLR 0x003c
+#define VPE_INT0_CHANNEL_GROUP0 (1 << 0)
+#define VPE_INT0_CHANNEL_GROUP1 (1 << 1)
+#define VPE_INT0_CHANNEL_GROUP2 (1 << 2)
+#define VPE_INT0_CHANNEL_GROUP3 (1 << 3)
+#define VPE_INT0_CHANNEL_GROUP4 (1 << 4)
+#define VPE_INT0_CHANNEL_GROUP5 (1 << 5)
+#define VPE_INT0_CLIENT (1 << 7)
+#define VPE_DEI_ERROR_INT (1 << 16)
+#define VPE_DS1_UV_ERROR_INT (1 << 22)
+
+#define VPE_INTC_EOI 0x00a0
+
+#define VPE_CLK_ENABLE 0x0100
+#define VPE_VPEDMA_CLK_ENABLE (1 << 0)
+#define VPE_DATA_PATH_CLK_ENABLE (1 << 1)
+
+#define VPE_CLK_RESET 0x0104
+#define VPE_VPDMA_CLK_RESET_MASK 0x1
+#define VPE_VPDMA_CLK_RESET_SHIFT 0
+#define VPE_DATA_PATH_CLK_RESET_MASK 0x1
+#define VPE_DATA_PATH_CLK_RESET_SHIFT 1
+#define VPE_MAIN_RESET_MASK 0x1
+#define VPE_MAIN_RESET_SHIFT 31
+
+#define VPE_CLK_FORMAT_SELECT 0x010c
+#define VPE_CSC_SRC_SELECT_MASK 0x03
+#define VPE_CSC_SRC_SELECT_SHIFT 0
+#define VPE_RGB_OUT_SELECT (1 << 8)
+#define VPE_DS_SRC_SELECT_MASK 0x07
+#define VPE_DS_SRC_SELECT_SHIFT 9
+#define VPE_DS_BYPASS (1 << 16)
+#define VPE_COLOR_SEPARATE_422 (1 << 18)
+
+#define VPE_DS_SRC_DEI_SCALER (5 << VPE_DS_SRC_SELECT_SHIFT)
+#define VPE_CSC_SRC_DEI_SCALER (3 << VPE_CSC_SRC_SELECT_SHIFT)
+
+#define VPE_CLK_RANGE_MAP 0x011c
+#define VPE_RANGE_RANGE_MAP_Y_MASK 0x07
+#define VPE_RANGE_RANGE_MAP_Y_SHIFT 0
+#define VPE_RANGE_RANGE_MAP_UV_MASK 0x07
+#define VPE_RANGE_RANGE_MAP_UV_SHIFT 3
+#define VPE_RANGE_MAP_ON (1 << 6)
+#define VPE_RANGE_REDUCTION_ON (1 << 28)
+
+/* VPE chrominance upsampler regs */
+#define VPE_US1_R0 0x0304
+#define VPE_US2_R0 0x0404
+#define VPE_US3_R0 0x0504
+#define VPE_US_C1_MASK 0x3fff
+#define VPE_US_C1_SHIFT 2
+#define VPE_US_C0_MASK 0x3fff
+#define VPE_US_C0_SHIFT 18
+#define VPE_US_MODE_MASK 0x03
+#define VPE_US_MODE_SHIFT 16
+#define VPE_ANCHOR_FID0_C1_MASK 0x3fff
+#define VPE_ANCHOR_FID0_C1_SHIFT 2
+#define VPE_ANCHOR_FID0_C0_MASK 0x3fff
+#define VPE_ANCHOR_FID0_C0_SHIFT 18
+
+#define VPE_US1_R1 0x0308
+#define VPE_US2_R1 0x0408
+#define VPE_US3_R1 0x0508
+#define VPE_ANCHOR_FID0_C3_MASK 0x3fff
+#define VPE_ANCHOR_FID0_C3_SHIFT 2
+#define VPE_ANCHOR_FID0_C2_MASK 0x3fff
+#define VPE_ANCHOR_FID0_C2_SHIFT 18
+
+#define VPE_US1_R2 0x030c
+#define VPE_US2_R2 0x040c
+#define VPE_US3_R2 0x050c
+#define VPE_INTERP_FID0_C1_MASK 0x3fff
+#define VPE_INTERP_FID0_C1_SHIFT 2
+#define VPE_INTERP_FID0_C0_MASK 0x3fff
+#define VPE_INTERP_FID0_C0_SHIFT 18
+
+#define VPE_US1_R3 0x0310
+#define VPE_US2_R3 0x0410
+#define VPE_US3_R3 0x0510
+#define VPE_INTERP_FID0_C3_MASK 0x3fff
+#define VPE_INTERP_FID0_C3_SHIFT 2
+#define VPE_INTERP_FID0_C2_MASK 0x3fff
+#define VPE_INTERP_FID0_C2_SHIFT 18
+
+#define VPE_US1_R4 0x0314
+#define VPE_US2_R4 0x0414
+#define VPE_US3_R4 0x0514
+#define VPE_ANCHOR_FID1_C1_MASK 0x3fff
+#define VPE_ANCHOR_FID1_C1_SHIFT 2
+#define VPE_ANCHOR_FID1_C0_MASK 0x3fff
+#define VPE_ANCHOR_FID1_C0_SHIFT 18
+
+#define VPE_US1_R5 0x0318
+#define VPE_US2_R5 0x0418
+#define VPE_US3_R5 0x0518
+#define VPE_ANCHOR_FID1_C3_MASK 0x3fff
+#define VPE_ANCHOR_FID1_C3_SHIFT 2
+#define VPE_ANCHOR_FID1_C2_MASK 0x3fff
+#define VPE_ANCHOR_FID1_C2_SHIFT 18
+
+#define VPE_US1_R6 0x031c
+#define VPE_US2_R6 0x041c
+#define VPE_US3_R6 0x051c
+#define VPE_INTERP_FID1_C1_MASK 0x3fff
+#define VPE_INTERP_FID1_C1_SHIFT 2
+#define VPE_INTERP_FID1_C0_MASK 0x3fff
+#define VPE_INTERP_FID1_C0_SHIFT 18
+
+#define VPE_US1_R7 0x0320
+#define VPE_US2_R7 0x0420
+#define VPE_US3_R7 0x0520
+#define VPE_INTERP_FID0_C3_MASK 0x3fff
+#define VPE_INTERP_FID0_C3_SHIFT 2
+#define VPE_INTERP_FID0_C2_MASK 0x3fff
+#define VPE_INTERP_FID0_C2_SHIFT 18
+
+/* VPE de-interlacer regs */
+#define VPE_DEI_FRAME_SIZE 0x0600
+#define VPE_DEI_WIDTH_MASK 0x07ff
+#define VPE_DEI_WIDTH_SHIFT 0
+#define VPE_DEI_HEIGHT_MASK 0x07ff
+#define VPE_DEI_HEIGHT_SHIFT 16
+#define VPE_DEI_INTERLACE_BYPASS (1 << 29)
+#define VPE_DEI_FIELD_FLUSH (1 << 30)
+#define VPE_DEI_PROGRESSIVE (1 << 31)
+
+#define VPE_MDT_BYPASS 0x0604
+#define VPE_MDT_TEMPMAX_BYPASS (1 << 0)
+#define VPE_MDT_SPATMAX_BYPASS (1 << 1)
+
+#define VPE_MDT_SF_THRESHOLD 0x0608
+#define VPE_MDT_SF_SC_THR1_MASK 0xff
+#define VPE_MDT_SF_SC_THR1_SHIFT 0
+#define VPE_MDT_SF_SC_THR2_MASK 0xff
+#define VPE_MDT_SF_SC_THR2_SHIFT 0
+#define VPE_MDT_SF_SC_THR3_MASK 0xff
+#define VPE_MDT_SF_SC_THR3_SHIFT 0
+
+#define VPE_EDI_CONFIG 0x060c
+#define VPE_EDI_INP_MODE_MASK 0x03
+#define VPE_EDI_INP_MODE_SHIFT 0
+#define VPE_EDI_ENABLE_3D (1 << 2)
+#define VPE_EDI_ENABLE_CHROMA_3D (1 << 3)
+#define VPE_EDI_CHROMA3D_COR_THR_MASK 0xff
+#define VPE_EDI_CHROMA3D_COR_THR_SHIFT 8
+#define VPE_EDI_DIR_COR_LOWER_THR_MASK 0xff
+#define VPE_EDI_DIR_COR_LOWER_THR_SHIFT 16
+#define VPE_EDI_COR_SCALE_FACTOR_MASK 0xff
+#define VPE_EDI_COR_SCALE_FACTOR_SHIFT 23
+
+#define VPE_DEI_EDI_LUT_R0 0x0610
+#define VPE_EDI_LUT0_MASK 0x1f
+#define VPE_EDI_LUT0_SHIFT 0
+#define VPE_EDI_LUT1_MASK 0x1f
+#define VPE_EDI_LUT1_SHIFT 8
+#define VPE_EDI_LUT2_MASK 0x1f
+#define VPE_EDI_LUT2_SHIFT 16
+#define VPE_EDI_LUT3_MASK 0x1f
+#define VPE_EDI_LUT3_SHIFT 24
+
+#define VPE_DEI_EDI_LUT_R1 0x0614
+#define VPE_EDI_LUT0_MASK 0x1f
+#define VPE_EDI_LUT0_SHIFT 0
+#define VPE_EDI_LUT1_MASK 0x1f
+#define VPE_EDI_LUT1_SHIFT 8
+#define VPE_EDI_LUT2_MASK 0x1f
+#define VPE_EDI_LUT2_SHIFT 16
+#define VPE_EDI_LUT3_MASK 0x1f
+#define VPE_EDI_LUT3_SHIFT 24
+
+#define VPE_DEI_EDI_LUT_R2 0x0618
+#define VPE_EDI_LUT4_MASK 0x1f
+#define VPE_EDI_LUT4_SHIFT 0
+#define VPE_EDI_LUT5_MASK 0x1f
+#define VPE_EDI_LUT5_SHIFT 8
+#define VPE_EDI_LUT6_MASK 0x1f
+#define VPE_EDI_LUT6_SHIFT 16
+#define VPE_EDI_LUT7_MASK 0x1f
+#define VPE_EDI_LUT7_SHIFT 24
+
+#define VPE_DEI_EDI_LUT_R3 0x061c
+#define VPE_EDI_LUT8_MASK 0x1f
+#define VPE_EDI_LUT8_SHIFT 0
+#define VPE_EDI_LUT9_MASK 0x1f
+#define VPE_EDI_LUT9_SHIFT 8
+#define VPE_EDI_LUT10_MASK 0x1f
+#define VPE_EDI_LUT10_SHIFT 16
+#define VPE_EDI_LUT11_MASK 0x1f
+#define VPE_EDI_LUT11_SHIFT 24
+
+#define VPE_DEI_FMD_WINDOW_R0 0x0620
+#define VPE_FMD_WINDOW_MINX_MASK 0x07ff
+#define VPE_FMD_WINDOW_MINX_SHIFT 0
+#define VPE_FMD_WINDOW_MAXX_MASK 0x07ff
+#define VPE_FMD_WINDOW_MAXX_SHIFT 16
+#define VPE_FMD_WINDOW_ENABLE (1 << 31)
+
+#define VPE_DEI_FMD_WINDOW_R1 0x0624
+#define VPE_FMD_WINDOW_MINY_MASK 0x07ff
+#define VPE_FMD_WINDOW_MINY_SHIFT 0
+#define VPE_FMD_WINDOW_MAXY_MASK 0x07ff
+#define VPE_FMD_WINDOW_MAXY_SHIFT 16
+
+#define VPE_DEI_FMD_CONTROL_R0 0x0628
+#define VPE_FMD_ENABLE (1 << 0)
+#define VPE_FMD_LOCK (1 << 1)
+#define VPE_FMD_JAM_DIR (1 << 2)
+#define VPE_FMD_BED_ENABLE (1 << 3)
+#define VPE_FMD_CAF_FIELD_THR_MASK 0xff
+#define VPE_FMD_CAF_FIELD_THR_SHIFT 16
+#define VPE_FMD_CAF_LINE_THR_MASK 0xff
+#define VPE_FMD_CAF_LINE_THR_SHIFT 24
+
+#define VPE_DEI_FMD_CONTROL_R1 0x062c
+#define VPE_FMD_CAF_THR_MASK 0x000fffff
+#define VPE_FMD_CAF_THR_SHIFT 0
+
+#define VPE_DEI_FMD_STATUS_R0 0x0630
+#define VPE_FMD_CAF_MASK 0x000fffff
+#define VPE_FMD_CAF_SHIFT 0
+#define VPE_FMD_RESET (1 << 24)
+
+#define VPE_DEI_FMD_STATUS_R1 0x0634
+#define VPE_FMD_FIELD_DIFF_MASK 0x0fffffff
+#define VPE_FMD_FIELD_DIFF_SHIFT 0
+
+#define VPE_DEI_FMD_STATUS_R2 0x0638
+#define VPE_FMD_FRAME_DIFF_MASK 0x000fffff
+#define VPE_FMD_FRAME_DIFF_SHIFT 0
+
+/* VPE scaler regs */
+#define VPE_SC_MP_SC0 0x0700
+#define VPE_INTERLACE_O (1 << 0)
+#define VPE_LINEAR (1 << 1)
+#define VPE_SC_BYPASS (1 << 2)
+#define VPE_INVT_FID (1 << 3)
+#define VPE_USE_RAV (1 << 4)
+#define VPE_ENABLE_EV (1 << 5)
+#define VPE_AUTO_HS (1 << 6)
+#define VPE_DCM_2X (1 << 7)
+#define VPE_DCM_4X (1 << 8)
+#define VPE_HP_BYPASS (1 << 9)
+#define VPE_INTERLACE_I (1 << 10)
+#define VPE_ENABLE_SIN2_VER_INTP (1 << 11)
+#define VPE_Y_PK_EN (1 << 14)
+#define VPE_TRIM (1 << 15)
+#define VPE_SELFGEN_FID (1 << 16)
+
+#define VPE_SC_MP_SC1 0x0704
+#define VPE_ROW_ACC_INC_MASK 0x07ffffff
+#define VPE_ROW_ACC_INC_SHIFT 0
+
+#define VPE_SC_MP_SC2 0x0708
+#define VPE_ROW_ACC_OFFSET_MASK 0x0fffffff
+#define VPE_ROW_ACC_OFFSET_SHIFT 0
+
+#define VPE_SC_MP_SC3 0x070c
+#define VPE_ROW_ACC_OFFSET_B_MASK 0x0fffffff
+#define VPE_ROW_ACC_OFFSET_B_SHIFT 0
+
+#define VPE_SC_MP_SC4 0x0710
+#define VPE_TAR_H_MASK 0x07ff
+#define VPE_TAR_H_SHIFT 0
+#define VPE_TAR_W_MASK 0x07ff
+#define VPE_TAR_W_SHIFT 12
+#define VPE_LIN_ACC_INC_U_MASK 0x07
+#define VPE_LIN_ACC_INC_U_SHIFT 24
+#define VPE_NLIN_ACC_INIT_U_MASK 0x07
+#define VPE_NLIN_ACC_INIT_U_SHIFT 28
+
+#define VPE_SC_MP_SC5 0x0714
+#define VPE_SRC_H_MASK 0x07ff
+#define VPE_SRC_H_SHIFT 0
+#define VPE_SRC_W_MASK 0x07ff
+#define VPE_SRC_W_SHIFT 12
+#define VPE_NLIN_ACC_INC_U_MASK 0x07
+#define VPE_NLIN_ACC_INC_U_SHIFT 24
+
+#define VPE_SC_MP_SC6 0x0718
+#define VPE_ROW_ACC_INIT_RAV_MASK 0x03ff
+#define VPE_ROW_ACC_INIT_RAV_SHIFT 0
+#define VPE_ROW_ACC_INIT_RAV_B_MASK 0x03ff
+#define VPE_ROW_ACC_INIT_RAV_B_SHIFT 10
+
+#define VPE_SC_MP_SC8 0x0720
+#define VPE_NLIN_LEFT_MASK 0x07ff
+#define VPE_NLIN_LEFT_SHIFT 0
+#define VPE_NLIN_RIGHT_MASK 0x07ff
+#define VPE_NLIN_RIGHT_SHIFT 12
+
+#define VPE_SC_MP_SC9 0x0724
+#define VPE_LIN_ACC_INC VPE_SC_MP_SC9
+
+#define VPE_SC_MP_SC10 0x0728
+#define VPE_NLIN_ACC_INIT VPE_SC_MP_SC10
+
+#define VPE_SC_MP_SC11 0x072c
+#define VPE_NLIN_ACC_INC VPE_SC_MP_SC11
+
+#define VPE_SC_MP_SC12 0x0730
+#define VPE_COL_ACC_OFFSET_MASK 0x01ffffff
+#define VPE_COL_ACC_OFFSET_SHIFT 0
+
+#define VPE_SC_MP_SC13 0x0734
+#define VPE_SC_FACTOR_RAV_MASK 0x03ff
+#define VPE_SC_FACTOR_RAV_SHIFT 0
+#define VPE_CHROMA_INTP_THR_MASK 0x03ff
+#define VPE_CHROMA_INTP_THR_SHIFT 12
+#define VPE_DELTA_CHROMA_THR_MASK 0x0f
+#define VPE_DELTA_CHROMA_THR_SHIFT 24
+
+#define VPE_SC_MP_SC17 0x0744
+#define VPE_EV_THR_MASK 0x03ff
+#define VPE_EV_THR_SHIFT 12
+#define VPE_DELTA_LUMA_THR_MASK 0x0f
+#define VPE_DELTA_LUMA_THR_SHIFT 24
+#define VPE_DELTA_EV_THR_MASK 0x0f
+#define VPE_DELTA_EV_THR_SHIFT 28
+
+#define VPE_SC_MP_SC18 0x0748
+#define VPE_HS_FACTOR_MASK 0x03ff
+#define VPE_HS_FACTOR_SHIFT 0
+#define VPE_CONF_DEFAULT_MASK 0x01ff
+#define VPE_CONF_DEFAULT_SHIFT 16
+
+#define VPE_SC_MP_SC19 0x074c
+#define VPE_HPF_COEFF0_MASK 0xff
+#define VPE_HPF_COEFF0_SHIFT 0
+#define VPE_HPF_COEFF1_MASK 0xff
+#define VPE_HPF_COEFF1_SHIFT 8
+#define VPE_HPF_COEFF2_MASK 0xff
+#define VPE_HPF_COEFF2_SHIFT 16
+#define VPE_HPF_COEFF3_MASK 0xff
+#define VPE_HPF_COEFF3_SHIFT 23
+
+#define VPE_SC_MP_SC20 0x0750
+#define VPE_HPF_COEFF4_MASK 0xff
+#define VPE_HPF_COEFF4_SHIFT 0
+#define VPE_HPF_COEFF5_MASK 0xff
+#define VPE_HPF_COEFF5_SHIFT 8
+#define VPE_HPF_NORM_SHIFT_MASK 0x07
+#define VPE_HPF_NORM_SHIFT_SHIFT 16
+#define VPE_NL_LIMIT_MASK 0x1ff
+#define VPE_NL_LIMIT_SHIFT 20
+
+#define VPE_SC_MP_SC21 0x0754
+#define VPE_NL_LO_THR_MASK 0x01ff
+#define VPE_NL_LO_THR_SHIFT 0
+#define VPE_NL_LO_SLOPE_MASK 0xff
+#define VPE_NL_LO_SLOPE_SHIFT 16
+
+#define VPE_SC_MP_SC22 0x0758
+#define VPE_NL_HI_THR_MASK 0x01ff
+#define VPE_NL_HI_THR_SHIFT 0
+#define VPE_NL_HI_SLOPE_SH_MASK 0x07
+#define VPE_NL_HI_SLOPE_SH_SHIFT 16
+
+#define VPE_SC_MP_SC23 0x075c
+#define VPE_GRADIENT_THR_MASK 0x07ff
+#define VPE_GRADIENT_THR_SHIFT 0
+#define VPE_GRADIENT_THR_RANGE_MASK 0x0f
+#define VPE_GRADIENT_THR_RANGE_SHIFT 12
+#define VPE_MIN_GY_THR_MASK 0xff
+#define VPE_MIN_GY_THR_SHIFT 16
+#define VPE_MIN_GY_THR_RANGE_MASK 0x0f
+#define VPE_MIN_GY_THR_RANGE_SHIFT 28
+
+#define VPE_SC_MP_SC24 0x0760
+#define VPE_ORG_H_MASK 0x07ff
+#define VPE_ORG_H_SHIFT 0
+#define VPE_ORG_W_MASK 0x07ff
+#define VPE_ORG_W_SHIFT 16
+
+#define VPE_SC_MP_SC25 0x0764
+#define VPE_OFF_H_MASK 0x07ff
+#define VPE_OFF_H_SHIFT 0
+#define VPE_OFF_W_MASK 0x07ff
+#define VPE_OFF_W_SHIFT 16
+
+/* VPE color space converter regs */
+#define VPE_CSC_CSC00 0x5700
+#define VPE_CSC_A0_MASK 0x1fff
+#define VPE_CSC_A0_SHIFT 0
+#define VPE_CSC_B0_MASK 0x1fff
+#define VPE_CSC_B0_SHIFT 16
+
+#define VPE_CSC_CSC01 0x5704
+#define VPE_CSC_C0_MASK 0x1fff
+#define VPE_CSC_C0_SHIFT 0
+#define VPE_CSC_A1_MASK 0x1fff
+#define VPE_CSC_A1_SHIFT 16
+
+#define VPE_CSC_CSC02 0x5708
+#define VPE_CSC_B1_MASK 0x1fff
+#define VPE_CSC_B1_SHIFT 0
+#define VPE_CSC_C1_MASK 0x1fff
+#define VPE_CSC_C1_SHIFT 16
+
+#define VPE_CSC_CSC03 0x570c
+#define VPE_CSC_A2_MASK 0x1fff
+#define VPE_CSC_A2_SHIFT 0
+#define VPE_CSC_B2_MASK 0x1fff
+#define VPE_CSC_B2_SHIFT 16
+
+#define VPE_CSC_CSC04 0x5710
+#define VPE_CSC_C2_MASK 0x1fff
+#define VPE_CSC_C2_SHIFT 0
+#define VPE_CSC_D0_MASK 0x0fff
+#define VPE_CSC_D0_SHIFT 16
+
+#define VPE_CSC_CSC05 0x5714
+#define VPE_CSC_D1_MASK 0x0fff
+#define VPE_CSC_D1_SHIFT 0
+#define VPE_CSC_D2_MASK 0x0fff
+#define VPE_CSC_D2_SHIFT 16
+#define VPE_CSC_BYPASS (1 << 28)
+
+#endif
@@ -160,6 +160,10 @@ enum v4l2_colorfx {
* of controls. Total of 16 controls is reserved for this driver */
#define V4L2_CID_USER_SI476X_BASE (V4L2_CID_USER_BASE + 0x1040)
+/* The base for the TI VPE driver controls. Total of 16 controls is reserved for
+ * this driver */
+#define V4L2_CID_USER_TI_VPE_BASE (V4L2_CID_USER_BASE + 0x1050)
+
/* MPEG-class control IDs */
/* The MPEG controls are applicable to all codec controls
* and the 'MPEG' part of the define is historical */
VPE is a block which consists of a single memory to memory path which can perform chrominance up/down sampling, de-interlacing, scaling, and color space conversion of raster or tiled YUV420 coplanar, YUV422 coplanar or YUV422 interleaved video formats. We create a mem2mem driver based primarily on the mem2mem-testdev example. The de-interlacer, scaler and color space converter are all bypassed for now to keep the driver simple. Chroma up/down sampler blocks are implemented, so conversion beteen different YUV formats is possible. Each mem2mem context allocates a buffer for VPE MMR values which it will use when it gets access to the VPE HW via the mem2mem queue, it also allocates a VPDMA descriptor list to which configuration and data descriptors are added. Based on the information received via v4l2 ioctls for the source and destination queues, the driver configures the values for the MMRs, and stores them in the buffer. There are also some VPDMA parameters like frame start and line mode which needs to be configured, these are configured by direct register writes via the VPDMA helper functions. The driver's device_run() mem2mem op will add each descriptor based on how the source and destination queues are set up for the given ctx, once the list is prepared, it's submitted to VPDMA, these descriptors when parsed by VPDMA will upload MMR registers, start DMA of video buffers on the various input and output clients/ports. When the list is parsed completely(and the DMAs on all the output ports done), an interrupt is generated which we use to notify that the source and destination buffers are done. The rest of the driver is quite similar to other mem2mem drivers, we use the multiplane v4l2 ioctls as the HW support coplanar formats. Signed-off-by: Archit Taneja <archit@ti.com> --- - changes in v5: - updated how pix->colorspace is set. - adds comments on what our private control ID is used for. - Removed the other patches from the series since they are the same. drivers/media/platform/Kconfig | 16 + drivers/media/platform/Makefile | 2 + drivers/media/platform/ti-vpe/Makefile | 5 + drivers/media/platform/ti-vpe/vpe.c | 1775 ++++++++++++++++++++++++++++++ drivers/media/platform/ti-vpe/vpe_regs.h | 496 +++++++++ include/uapi/linux/v4l2-controls.h | 4 + 6 files changed, 2298 insertions(+) create mode 100644 drivers/media/platform/ti-vpe/Makefile create mode 100644 drivers/media/platform/ti-vpe/vpe.c create mode 100644 drivers/media/platform/ti-vpe/vpe_regs.h