[03/11] media: rc: img-ir: add raw driver

Commit Message

James Hogan Dec. 13, 2013, 3:12 p.m. UTC

Add raw IR remote control input driver for the ImgTec Infrared decoder
block raw edge interrupts. Generic software protocol decoders are used
to allow multiple protocols to be supported at a time, including those
not supported by the hardware decoder.

Signed-off-by: James Hogan <[e-mail]>
Cc: Mauro Carvalho Chehab <[e-mail]>
Cc: [e-mail]
---
 drivers/media/rc/img-ir/img-ir-raw.c | 107 +++++++++++++++++++++++++++++++++++
 drivers/media/rc/img-ir/img-ir-raw.h |  58 +++++++++++++++++++
 2 files changed, 165 insertions(+)
 create mode 100644 drivers/media/rc/img-ir/img-ir-raw.c
 create mode 100644 drivers/media/rc/img-ir/img-ir-raw.h

Patch

diff --git a/drivers/media/rc/img-ir/img-ir-raw.c b/drivers/media/rc/img-ir/img-ir-raw.c
new file mode 100644
index 000000000000..7e90300d6daf
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-raw.c
@@ -0,0 +1,107 @@ 
+/*
+ * ImgTec IR Raw Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2013 Imagination Technologies Ltd.
+ *
+ * This ties into the input subsystem using the RC-core in raw mode. Raw IR
+ * signal edges are reported and decoded by generic software decoders.
+ */
+
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
+#include "img-ir.h"
+
+void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+	struct img_ir_priv_raw *raw = &priv->raw;
+	struct rc_dev *rc_dev = priv->raw.rdev;
+	int multiple;
+	u32 ir_status;
+
+	/* find whether both rise and fall was detected */
+	multiple = ((irq_status & IMG_IR_IRQ_EDGE) == IMG_IR_IRQ_EDGE);
+	/*
+	 * If so, we need to see if the level has actually changed.
+	 * If it's just noise that we didn't have time to process,
+	 * there's no point reporting it.
+	 */
+	ir_status = img_ir_read(priv, IMG_IR_STATUS) & IMG_IR_IRRXD;
+	if (multiple && ir_status == raw->last_status)
+		return;
+	raw->last_status = ir_status;
+
+	/* report the edge to the IR raw decoders */
+	if (ir_status) /* low */
+		ir_raw_event_store_edge(rc_dev, IR_SPACE);
+	else /* high */
+		ir_raw_event_store_edge(rc_dev, IR_PULSE);
+	ir_raw_event_handle(rc_dev);
+}
+
+void img_ir_setup_raw(struct img_ir_priv *priv)
+{
+	u32 irq_en;
+	unsigned long flags;
+
+	if (!priv->raw.rdev)
+		return;
+
+	/* clear and enable edge interrupts */
+	spin_lock_irqsave(&priv->lock, flags);
+	irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+	irq_en |= IMG_IR_IRQ_EDGE;
+	img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE);
+	img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+int img_ir_probe_raw(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_raw *raw = &priv->raw;
+	struct rc_dev *rdev;
+	int error;
+
+	/* Allocate raw decoder */
+	raw->rdev = rdev = rc_allocate_device();
+	if (!rdev) {
+		dev_err(priv->dev, "cannot allocate raw input device\n");
+		return -ENOMEM;
+	}
+	rdev->priv = priv;
+	rdev->map_name = RC_MAP_EMPTY;
+	rdev->input_name = "IMG Infrared Decoder Raw";
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+
+	/* Register raw decoder */
+	error = rc_register_device(rdev);
+	if (error) {
+		dev_err(priv->dev, "failed to register raw IR input device\n");
+		rc_free_device(rdev);
+		raw->rdev = NULL;
+		return error;
+	}
+
+	return 0;
+}
+
+void img_ir_remove_raw(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_raw *raw = &priv->raw;
+	struct rc_dev *rdev = raw->rdev;
+	unsigned long flags;
+	u32 irq_en;
+
+	if (!rdev)
+		return;
+
+	/* switch off and disable raw (edge) interrupts */
+	spin_lock_irqsave(&priv->lock, flags);
+	raw->rdev = NULL;
+	irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+	irq_en &= ~IMG_IR_IRQ_EDGE;
+	img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+	img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	rc_unregister_device(rdev);
+}
diff --git a/drivers/media/rc/img-ir/img-ir-raw.h b/drivers/media/rc/img-ir/img-ir-raw.h
new file mode 100644
index 000000000000..d302a65e19dc
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-raw.h
@@ -0,0 +1,58 @@ 
+/*
+ * ImgTec IR Raw Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2013 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_RAW_H_
+#define _IMG_IR_RAW_H_
+
+struct img_ir_priv;
+
+#ifdef CONFIG_IR_IMG_RAW
+
+/**
+ * struct img_ir_priv_raw - Private driver data for raw decoder.
+ * @rdev:		Raw remote control device
+ * @last_status:	Last raw status bits.
+ */
+struct img_ir_priv_raw {
+	struct rc_dev	*rdev;
+	u32		last_status;
+};
+
+static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw)
+{
+	return raw->rdev;
+};
+
+void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status);
+void img_ir_setup_raw(struct img_ir_priv *priv);
+int img_ir_probe_raw(struct img_ir_priv *priv);
+void img_ir_remove_raw(struct img_ir_priv *priv);
+
+#else
+
+struct img_ir_priv_raw {
+};
+static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw)
+{
+	return false;
+};
+static inline void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+}
+static inline void img_ir_setup_raw(struct img_ir_priv *priv)
+{
+}
+static inline int img_ir_probe_raw(struct img_ir_priv *priv)
+{
+	return -ENODEV;
+}
+static inline void img_ir_remove_raw(struct img_ir_priv *priv)
+{
+}
+
+#endif /* CONFIG_IR_IMG_RAW */
+
+#endif /* _IMG_IR_RAW_H_ */