@@ -160,24 +160,44 @@ static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate)
{
struct m88rs2000_state *state = fe->demodulator_priv;
int ret;
- u32 temp;
+ u64 temp;
+ u32 mclk;
u8 b[3];
if ((srate < 1000000) || (srate > 45000000))
return -EINVAL;
+ mclk = m88rs2000_get_mclk(fe);
+ if (!mclk)
+ return -EINVAL;
+
temp = srate / 1000;
- temp *= 11831;
- temp /= 68;
- temp -= 3;
+ temp *= 1 << 24;
+
+ do_div(temp, mclk);
b[0] = (u8) (temp >> 16) & 0xff;
b[1] = (u8) (temp >> 8) & 0xff;
b[2] = (u8) temp & 0xff;
+
ret = m88rs2000_writereg(state, 0x93, b[2]);
ret |= m88rs2000_writereg(state, 0x94, b[1]);
ret |= m88rs2000_writereg(state, 0x95, b[0]);
+ if (srate > 10000000)
+ ret |= m88rs2000_writereg(state, 0xa0, 0x20);
+ else
+ ret |= m88rs2000_writereg(state, 0xa0, 0x60);
+
+ ret |= m88rs2000_writereg(state, 0xa1, 0xe0);
+
+ if (srate > 12000000)
+ ret |= m88rs2000_writereg(state, 0xa3, 0x20);
+ else if (srate > 2800000)
+ ret |= m88rs2000_writereg(state, 0xa3, 0x98);
+ else
+ ret |= m88rs2000_writereg(state, 0xa3, 0x90);
+
deb_info("m88rs2000: m88rs2000_set_symbolrate\n");
return ret;
}
@@ -307,8 +327,6 @@ struct inittab m88rs2000_shutdown[] = {
struct inittab fe_reset[] = {
{DEMOD_WRITE, 0x00, 0x01},
- {DEMOD_WRITE, 0xf1, 0xbf},
- {DEMOD_WRITE, 0x00, 0x01},
{DEMOD_WRITE, 0x20, 0x81},
{DEMOD_WRITE, 0x21, 0x80},
{DEMOD_WRITE, 0x10, 0x33},
@@ -351,9 +369,6 @@ struct inittab fe_trigger[] = {
{DEMOD_WRITE, 0x9b, 0x64},
{DEMOD_WRITE, 0x9e, 0x00},
{DEMOD_WRITE, 0x9f, 0xf8},
- {DEMOD_WRITE, 0xa0, 0x20},
- {DEMOD_WRITE, 0xa1, 0xe0},
- {DEMOD_WRITE, 0xa3, 0x38},
{DEMOD_WRITE, 0x98, 0xff},
{DEMOD_WRITE, 0xc0, 0x0f},
{DEMOD_WRITE, 0x89, 0x01},
@@ -625,8 +640,13 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe)
if (ret < 0)
return -ENODEV;
- /* Reset Demod */
- ret = m88rs2000_tab_set(state, fe_reset);
+ /* Reset demod by symbol rate */
+ if (c->symbol_rate > 27500000)
+ ret = m88rs2000_writereg(state, 0xf1, 0xa4);
+ else
+ ret = m88rs2000_writereg(state, 0xf1, 0xbf);
+
+ ret |= m88rs2000_tab_set(state, fe_reset);
if (ret < 0)
return -ENODEV;
Current setting of symbol rate is not very actuate causing loss of lock. Covert temp to u64 and use mclk to calculate from big number. Calculate symbol rate by dividing symbol rate by 1000 times 1 << 24 and dividing sum by mclk. Add other symbol rate settings to function registers 0xa0-0xa3. In set_frontend add changes to register 0xf1 this must be done prior call to fe_reset. Register 0x00 doesn't need a second write of 0x1 Applied after patch m88rs2000: add m88rs2000_set_carrieroffset Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: stable@vger.kernel.org # v3.9+ --- drivers/media/dvb-frontends/m88rs2000.c | 42 ++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 11 deletions(-)