new file mode 100644
@@ -0,0 +1,1231 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung EXYNOS5 SoC series SCALER driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+
+#include "scaler-regs.h"
+
+#define SCALER_CLOCK_GATE_NAME "scaler"
+
+static const struct scaler_fmt scaler_formats[] = {
+ {
+ .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr",
+ .pixelformat = V4L2_PIX_FMT_NV12M,
+ .depth = { 8, 4 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CBCR,
+ .num_planes = 2,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV420_2P_Y_UV,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+
+ }, {
+ .name = "YUV 4:2:0 contig. 2p, Y/CbCr",
+ .pixelformat = V4L2_PIX_FMT_NV12,
+ .depth = { 12 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CBCR,
+ .num_planes = 1,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV420_2P_Y_UV,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:0 n.c. 2p, Y/CbCr tiled",
+ .pixelformat = V4L2_PIX_FMT_NV12MT_16X16,
+ .depth = { 8, 4 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CBCR,
+ .num_planes = 2,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV420_2P_Y_UV,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_TILED,
+ }, {
+ .name = "YUV 4:2:2 contig. 2p, Y/CbCr",
+ .pixelformat = V4L2_PIX_FMT_NV16,
+ .depth = { 16 },
+ .color = SCALER_YUV422,
+ .color_order = SCALER_CBCR,
+ .num_planes = 1,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV422_2P_Y_UV,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:4:4 contig. 2p, Y/CbCr",
+ .pixelformat = V4L2_PIX_FMT_NV24,
+ .depth = { 24 },
+ .color = SCALER_YUV444,
+ .color_order = SCALER_CBCR,
+ .num_planes = 1,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV444_2P_Y_UV,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "RGB565",
+ .pixelformat = V4L2_PIX_FMT_RGB565X,
+ .depth = { 16 },
+ .color = SCALER_RGB,
+ .num_planes = 1,
+ .num_comp = 1,
+ .scaler_color = SCALER_RGB565,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "XRGB-1555, 16 bpp",
+ .pixelformat = V4L2_PIX_FMT_RGB555,
+ .depth = { 16 },
+ .color = SCALER_RGB,
+ .num_planes = 1,
+ .num_comp = 1,
+ .scaler_color = SCALER_ARGB1555,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "XRGB-8888, 32 bpp",
+ .pixelformat = V4L2_PIX_FMT_RGB32,
+ .depth = { 32 },
+ .color = SCALER_RGB,
+ .num_planes = 1,
+ .num_comp = 1,
+ .scaler_color = SCALER_ARGB8888,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:2 packed, YCrYCb",
+ .pixelformat = V4L2_PIX_FMT_YVYU,
+ .depth = { 16 },
+ .color = SCALER_YUV422,
+ .color_order = SCALER_CRCB,
+ .num_planes = 1,
+ .num_comp = 1,
+ .scaler_color = SCALER_YUV422_1P_YVYU,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:2 packed, YCbYCr",
+ .pixelformat = V4L2_PIX_FMT_YUYV,
+ .depth = { 16 },
+ .color = SCALER_YUV422,
+ .color_order = SCALER_CBCR,
+ .num_planes = 1,
+ .num_comp = 1,
+ .scaler_color = SCALER_YUV422_1P_YUYV,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:2 packed, CbYCrY",
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ .depth = { 16 },
+ .color = SCALER_YUV422,
+ .color_order = SCALER_CBCR,
+ .num_planes = 1,
+ .num_comp = 1,
+ .scaler_color = SCALER_YUV422_1P_UYVY,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "XRGB-4444, 16 bpp",
+ .pixelformat = V4L2_PIX_FMT_RGB444,
+ .depth = { 16 },
+ .color = SCALER_RGB,
+ .num_planes = 1,
+ .num_comp = 1,
+ .scaler_color = SCALER_ARGB4444,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:0 non-contig. 2p, Y/CrCb",
+ .pixelformat = V4L2_PIX_FMT_NV21M,
+ .depth = { 8, 4 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CRCB,
+ .num_planes = 2,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV420_2P_Y_VU,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:0 contig. 2p, Y/CrCb",
+ .pixelformat = V4L2_PIX_FMT_NV21,
+ .depth = { 12 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CRCB,
+ .num_planes = 1,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV420_2P_Y_VU,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:2 contig. 2p, Y/CrCb",
+ .pixelformat = V4L2_PIX_FMT_NV61,
+ .depth = { 16 },
+ .color = SCALER_YUV422,
+ .color_order = SCALER_CRCB,
+ .num_planes = 1,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV422_2P_Y_VU,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:4:4 contig. 2p, Y/CrCb",
+ .pixelformat = V4L2_PIX_FMT_NV42,
+ .depth = { 24 },
+ .color = SCALER_YUV444,
+ .color_order = SCALER_CRCB,
+ .num_planes = 1,
+ .num_comp = 2,
+ .scaler_color = SCALER_YUV444_2P_Y_VU,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:0 contig. 3p, YCbCr",
+ .pixelformat = V4L2_PIX_FMT_YUV420,
+ .depth = { 12 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CBCR,
+ .num_planes = 1,
+ .num_comp = 3,
+ .scaler_color = SCALER_YUV420_3P_Y_U_V,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:0 contig. 3p, YCrCb",
+ .pixelformat = V4L2_PIX_FMT_YVU420,
+ .depth = { 12 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CRCB,
+ .num_planes = 1,
+ .num_comp = 3,
+ .scaler_color = SCALER_YUV420_3P_Y_U_V,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr",
+ .pixelformat = V4L2_PIX_FMT_YUV420M,
+ .depth = { 8, 2, 2 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CBCR,
+ .num_planes = 3,
+ .num_comp = 3,
+ .scaler_color = SCALER_YUV420_3P_Y_U_V,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:0 non-contig. 3p, Y/Cr/Cb",
+ .pixelformat = V4L2_PIX_FMT_YVU420M,
+ .depth = { 8, 2, 2 },
+ .color = SCALER_YUV420,
+ .color_order = SCALER_CRCB,
+ .num_planes = 3,
+ .num_comp = 3,
+ .scaler_color = SCALER_YUV420_3P_Y_U_V,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ }, {
+ .name = "YUV 4:2:2 contig. 3p, Y/Cb/Cr",
+ .pixelformat = V4L2_PIX_FMT_YUV422P,
+ .depth = { 16 },
+ .color = SCALER_YUV422,
+ .color_order = SCALER_CBCR,
+ .num_planes = 1,
+ .num_comp = 3,
+ .scaler_color = SCALER_YUV422_3P_Y_U_V,
+ .flags = SCALER_FMT_SRC | SCALER_FMT_DST,
+ },
+
+ /*
+ * TODO: support pixel formats, corresponds to these scaler_color
+ * formats. SCALER_L8A8, SCALER_RGBA8888, SCALER_L8 etc
+ */
+};
+
+const struct scaler_fmt *scaler_get_format(int index)
+{
+ if (index >= ARRAY_SIZE(scaler_formats))
+ return NULL;
+
+ return &scaler_formats[index];
+}
+
+const struct scaler_fmt *scaler_find_fmt(u32 *pixelformat, int index)
+{
+ unsigned int i;
+ int num_fmts = ARRAY_SIZE(scaler_formats);
+
+ if (index >= num_fmts)
+ return NULL;
+
+ if (index >= 0)
+ return &scaler_formats[index];
+
+ if (!pixelformat)
+ return NULL;
+
+ for (i = 0; i < num_fmts; ++i)
+ if (scaler_formats[i].pixelformat == *pixelformat)
+ return &scaler_formats[i];
+
+ return NULL;
+}
+
+void scaler_set_frame_size(struct scaler_frame *frame, int width, int height)
+{
+ frame->f_width = width;
+ frame->f_height = height;
+ frame->selection.width = width;
+ frame->selection.height = height;
+ frame->selection.left = 0;
+ frame->selection.top = 0;
+}
+
+int scaler_enum_fmt_mplane(struct v4l2_fmtdesc *f)
+{
+ const struct scaler_fmt *fmt;
+
+ fmt = scaler_find_fmt(NULL, f->index);
+ if (!fmt)
+ return -EINVAL;
+
+ /*
+ * Input supports all scaler_formats but all scaler_formats are not
+ * supported for output. Don't return unsupported formats for output.
+ */
+ if (!(V4L2_TYPE_IS_OUTPUT(f->type) &&
+ (fmt->flags & SCALER_FMT_SRC)))
+ return -EINVAL;
+
+ strlcpy(f->description, fmt->name, sizeof(f->description));
+ f->pixelformat = fmt->pixelformat;
+
+ return 0;
+}
+
+struct scaler_frame *ctx_get_frame(struct scaler_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ return &ctx->s_frame;
+
+ if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+ return &ctx->d_frame;
+
+ scaler_dbg(ctx->scaler_dev, "Wrong buffer/video queue type (%d)", type);
+ return ERR_PTR(-EINVAL);
+}
+
+
+static u32 get_plane_info(struct scaler_frame *frm, u32 addr, u32 *index)
+{
+ if (frm->addr.y == addr) {
+ *index = 0;
+ return frm->addr.y;
+ } else if (frm->addr.cb == addr) {
+ *index = 1;
+ return frm->addr.cb;
+ } else if (frm->addr.cr == addr) {
+ *index = 2;
+ return frm->addr.cr;
+ }
+
+ pr_debug("Plane address is wrong\n");
+ return -EINVAL;
+}
+
+void scaler_set_prefbuf(struct scaler_dev *scaler, struct scaler_frame *frm)
+{
+ u32 f_chk_addr, f_chk_len, s_chk_addr, s_chk_len;
+ f_chk_addr = f_chk_len = s_chk_addr = s_chk_len = 0;
+
+ f_chk_addr = frm->addr.y;
+ f_chk_len = frm->payload[0];
+
+ if (frm->fmt->num_planes == 2) {
+ s_chk_addr = frm->addr.cb;
+ s_chk_len = frm->payload[1];
+ } else if (frm->fmt->num_planes == 3) {
+ u32 low_addr, low_plane, mid_addr, mid_plane;
+ u32 high_addr, high_plane;
+ u32 t_min, t_max;
+
+ t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr);
+ low_addr = get_plane_info(frm, t_min, &low_plane);
+ t_max = max3(frm->addr.y, frm->addr.cb, frm->addr.cr);
+ high_addr = get_plane_info(frm, t_max, &high_plane);
+
+ mid_plane = 3 - (low_plane + high_plane);
+ if (mid_plane == 0)
+ mid_addr = frm->addr.y;
+ else if (mid_plane == 1)
+ mid_addr = frm->addr.cb;
+ else if (mid_plane == 2)
+ mid_addr = frm->addr.cr;
+ else
+ return;
+
+ f_chk_addr = low_addr;
+ if (mid_addr + frm->payload[mid_plane] - low_addr >
+ high_addr + frm->payload[high_plane] - mid_addr) {
+ f_chk_len = frm->payload[low_plane];
+ s_chk_addr = mid_addr;
+ s_chk_len = high_addr +
+ frm->payload[high_plane] - mid_addr;
+ } else {
+ f_chk_len = mid_addr +
+ frm->payload[mid_plane] - low_addr;
+ s_chk_addr = high_addr;
+ s_chk_len = frm->payload[high_plane];
+ }
+ }
+
+ scaler_dbg(scaler,
+ "f_addr = 0x%08x, f_len = %d, s_addr = 0x%08x, s_len = %d\n",
+ f_chk_addr, f_chk_len, s_chk_addr, s_chk_len);
+}
+
+int scaler_try_fmt_mplane(struct scaler_ctx *ctx, struct v4l2_format *f)
+{
+ struct scaler_dev *scaler = ctx->scaler_dev;
+ struct device *dev = &scaler->pdev->dev;
+ struct scaler_variant *variant = scaler->variant;
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ const struct scaler_fmt *fmt;
+ u32 max_w, max_h, mod_w = 0, mod_h = 0;
+ u32 min_w, min_h, tmp_w, tmp_h;
+ int i;
+ struct scaler_frm_limit *frm_limit;
+
+ scaler_dbg(scaler, "user put w: %d, h: %d",
+ pix_mp->width, pix_mp->height);
+
+ fmt = scaler_find_fmt(&pix_mp->pixelformat, -1);
+ if (!fmt) {
+ scaler_dbg(scaler, "pixelformat format (0x%X) invalid\n",
+ pix_mp->pixelformat);
+ /* Falling back to default pixel format */
+ fmt = scaler_find_fmt(NULL, 0);
+ pix_mp->pixelformat = fmt->pixelformat;
+ }
+
+ pix_mp->field = V4L2_FIELD_NONE;
+ if (V4L2_TYPE_IS_OUTPUT(f->type))
+ frm_limit = variant->pix_out;
+ else
+ frm_limit = variant->pix_in;
+
+ max_w = frm_limit->max_w;
+ max_h = frm_limit->max_h;
+ min_w = frm_limit->min_w;
+ min_h = frm_limit->min_h;
+
+ /* Span has to be even number for YCbCr422-2p or YCbCr420 format. */
+ if (is_yuv422_2p(fmt) || is_yuv420(fmt))
+ mod_w = 1;
+
+ scaler_dbg(scaler, "mod_w: %d, mod_h: %d, max_w: %d, max_h = %d",
+ mod_w, mod_h, max_w, max_h);
+
+ tmp_w = pix_mp->width;
+ tmp_h = pix_mp->height;
+
+ v4l_bound_align_image(&pix_mp->width, min_w, max_w, mod_w,
+ &pix_mp->height, min_h, max_h, mod_h, 0);
+ if (tmp_w != pix_mp->width || tmp_h != pix_mp->height)
+ dev_info(dev,
+ "Image size has been modified from %dx%d to %dx%d",
+ tmp_w, tmp_h, pix_mp->width, pix_mp->height);
+
+ pix_mp->num_planes = fmt->num_planes;
+
+ /*
+ * Nothing mentioned about the colorspace in SCALER. Default value is
+ * set to V4L2_COLORSPACE_REC709.
+ */
+ pix_mp->colorspace = V4L2_COLORSPACE_REC709;
+
+ for (i = 0; i < pix_mp->num_planes; ++i) {
+ int bpl = (pix_mp->width * fmt->depth[i]) >> 3;
+ pix_mp->plane_fmt[i].bytesperline = bpl;
+ pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height;
+
+ scaler_dbg(scaler, "[%d]: bpl: %d, sizeimage: %d",
+ i, bpl, pix_mp->plane_fmt[i].sizeimage);
+ }
+
+ return 0;
+}
+
+int scaler_g_fmt_mplane(struct scaler_ctx *ctx, struct v4l2_format *f)
+{
+ struct scaler_frame *frame;
+ struct v4l2_pix_format_mplane *pix_mp;
+ int i;
+
+ frame = ctx_get_frame(ctx, f->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ pix_mp = &f->fmt.pix_mp;
+
+ pix_mp->width = frame->f_width;
+ pix_mp->height = frame->f_height;
+ pix_mp->field = V4L2_FIELD_NONE;
+ pix_mp->pixelformat = frame->fmt->pixelformat;
+ pix_mp->colorspace = V4L2_COLORSPACE_REC709;
+ pix_mp->num_planes = frame->fmt->num_planes;
+
+ for (i = 0; i < pix_mp->num_planes; ++i) {
+ pix_mp->plane_fmt[i].bytesperline = (frame->f_width *
+ frame->fmt->depth[i]) / 8;
+ pix_mp->plane_fmt[i].sizeimage =
+ pix_mp->plane_fmt[i].bytesperline * frame->f_height;
+ }
+
+ return 0;
+}
+
+void scaler_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h)
+{
+ if (tmp_w != *w || tmp_h != *h) {
+ pr_info("Cropped size has been modified from %dx%d to %dx%d",
+ *w, *h, tmp_w, tmp_h);
+ *w = tmp_w;
+ *h = tmp_h;
+ }
+}
+
+int scaler_g_crop(struct scaler_ctx *ctx, struct v4l2_crop *cr)
+{
+ struct scaler_frame *frame;
+
+ frame = ctx_get_frame(ctx, cr->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ cr->c = frame->selection;
+
+ return 0;
+}
+
+int scaler_try_crop(struct scaler_ctx *ctx, struct v4l2_crop *cr)
+{
+ struct scaler_frame *f;
+ const struct scaler_fmt *fmt;
+ struct scaler_dev *scaler = ctx->scaler_dev;
+ struct scaler_variant *variant = scaler->variant;
+ u32 mod_w = 0, mod_h = 0, tmp_w, tmp_h;
+ u32 min_w, min_h, max_w, max_h;
+ struct scaler_frm_limit *frm_limit;
+
+ if (cr->c.top < 0) {
+ scaler_dbg(scaler, "Adjusting crop.top value\n");
+ cr->c.top = 0;
+ }
+
+ if (cr->c.left < 0) {
+ scaler_dbg(scaler, "Adjusting crop.left value\n");
+ cr->c.left = 0;
+ }
+
+ scaler_dbg(scaler, "user requested width: %d, height: %d",
+ cr->c.width, cr->c.height);
+
+ f = ctx_get_frame(ctx, cr->type);
+ if (IS_ERR(f))
+ return PTR_ERR(f);
+
+ fmt = f->fmt;
+ tmp_w = cr->c.width;
+ tmp_h = cr->c.height;
+
+ if (V4L2_TYPE_IS_OUTPUT(cr->type))
+ frm_limit = variant->pix_out;
+ else
+ frm_limit = variant->pix_in;
+
+ max_w = f->f_width;
+ max_h = f->f_height;
+ min_w = frm_limit->min_w;
+ min_h = frm_limit->min_h;
+
+ if (V4L2_TYPE_IS_OUTPUT(cr->type)) {
+ if (is_yuv420(fmt)) {
+ mod_w = ffs(variant->pix_align->dst_w_420) - 1;
+ mod_h = ffs(variant->pix_align->dst_h_420) - 1;
+ } else if (is_yuv422(fmt)) {
+ mod_w = ffs(variant->pix_align->dst_w_422) - 1;
+ }
+ } else {
+ if (is_yuv420(fmt)) {
+ mod_w = ffs(variant->pix_align->src_w_420) - 1;
+ mod_h = ffs(variant->pix_align->src_h_420) - 1;
+ } else if (is_yuv422(fmt)) {
+ mod_w = ffs(variant->pix_align->src_w_422) - 1;
+ }
+
+ if (ctx->ctrls_scaler.rotate->val == 90 ||
+ ctx->ctrls_scaler.rotate->val == 270) {
+ max_w = f->f_height;
+ max_h = f->f_width;
+ tmp_w = cr->c.height;
+ tmp_h = cr->c.width;
+ }
+ }
+
+ scaler_dbg(scaler, "mod_x: %d, mod_y: %d, min_w: %d, min_h = %d, tmp_w : %d, tmp_h : %d",
+ mod_w, mod_h, min_w, min_h, tmp_w, tmp_h);
+
+ v4l_bound_align_image(&tmp_w, min_w, max_w, mod_w,
+ &tmp_h, min_h, max_h, mod_h, 0);
+
+ if (!V4L2_TYPE_IS_OUTPUT(cr->type) &&
+ (ctx->ctrls_scaler.rotate->val == 90 ||
+ ctx->ctrls_scaler.rotate->val == 270))
+ scaler_check_crop_change(tmp_h, tmp_w,
+ &cr->c.width, &cr->c.height);
+ else
+ scaler_check_crop_change(tmp_w, tmp_h,
+ &cr->c.width, &cr->c.height);
+
+ /*
+ * Adjust left/top if cropping rectangle is out of bounds. Need to add
+ * code to algin left value with 2's multiple.
+ */
+ if (cr->c.left + tmp_w > max_w)
+ cr->c.left = max_w - tmp_w;
+ if (cr->c.top + tmp_h > max_h)
+ cr->c.top = max_h - tmp_h;
+
+ if (is_yuv422_1p(fmt) && (cr->c.left & 1))
+ cr->c.left -= 1;
+
+ scaler_dbg(scaler, "Aligned l:%d, t:%d, w:%d, h:%d, f_w: %d, f_h: %d",
+ cr->c.left, cr->c.top, cr->c.width, cr->c.height, max_w, max_h);
+
+ return 0;
+}
+
+int scaler_check_scaler_ratio(struct scaler_variant *var, int sw, int sh,
+ int dw, int dh, int rot)
+{
+ if ((dw == 0) || (dh == 0))
+ return -EINVAL;
+
+ if (rot == 90 || rot == 270)
+ swap(dh, dw);
+
+ pr_debug("sw: %d, sh: %d, dw: %d, dh: %d\n", sw, sh, dw, dh);
+
+ if ((sw / dw) > var->scl_down_max || (sh / dh) > var->scl_down_max ||
+ (dw / sw) > var->scl_up_max || (dh / sh) > var->scl_up_max)
+ return -EINVAL;
+
+ return 0;
+}
+
+int scaler_set_scaler_info(struct scaler_ctx *ctx)
+{
+ struct scaler_scaler *sc = &ctx->scaler;
+ struct scaler_frame *s_frame = &ctx->s_frame;
+ struct scaler_frame *d_frame = &ctx->d_frame;
+ struct scaler_variant *variant = ctx->scaler_dev->variant;
+ int src_w, src_h, ret;
+
+ ret = scaler_check_scaler_ratio(variant,
+ s_frame->selection.width, s_frame->selection.height,
+ d_frame->selection.width, d_frame->selection.height,
+ ctx->ctrls_scaler.rotate->val);
+ if (ret < 0) {
+ scaler_dbg(ctx->scaler_dev, "out of scaler range\n");
+ return ret;
+ }
+
+ if (ctx->ctrls_scaler.rotate->val == 90 ||
+ ctx->ctrls_scaler.rotate->val == 270) {
+ src_w = s_frame->selection.height;
+ src_h = s_frame->selection.width;
+ } else {
+ src_w = s_frame->selection.width;
+ src_h = s_frame->selection.height;
+ }
+
+ sc->hratio = (src_w << 16) / d_frame->selection.width;
+ sc->vratio = (src_h << 16) / d_frame->selection.height;
+
+ scaler_dbg(ctx->scaler_dev, "scaler settings::\n"
+ "sx = %d, sy = %d, sw = %d, sh = %d\n"
+ "dx = %d, dy = %d, dw = %d, dh = %d\n"
+ "h-ratio : %d, v-ratio: %d\n",
+ s_frame->selection.left, s_frame->selection.top,
+ s_frame->selection.width, s_frame->selection.height,
+ d_frame->selection.left, d_frame->selection.top,
+ d_frame->selection.width, s_frame->selection.height,
+ sc->hratio, sc->vratio);
+
+ return 0;
+}
+
+static int __scaler_try_ctrl(struct scaler_ctx *ctx, struct v4l2_ctrl *ctrl)
+{
+ struct scaler_dev *scaler = ctx->scaler_dev;
+ struct scaler_variant *variant = scaler->variant;
+
+ switch (ctrl->id) {
+ case V4L2_CID_ROTATE:
+ return scaler_check_scaler_ratio(variant,
+ ctx->s_frame.selection.width,
+ ctx->s_frame.selection.height,
+ ctx->d_frame.selection.width,
+ ctx->d_frame.selection.height,
+ ctx->ctrls_scaler.rotate->val);
+ }
+
+ return 0;
+}
+
+static int scaler_try_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct scaler_ctx *ctx = ctrl_to_ctx(ctrl);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ctx->scaler_dev->slock, flags);
+ ret = __scaler_try_ctrl(ctx, ctrl);
+ spin_unlock_irqrestore(&ctx->scaler_dev->slock, flags);
+
+ return ret;
+}
+
+static int __scaler_s_ctrl(struct scaler_ctx *ctx, struct v4l2_ctrl *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_HFLIP:
+ ctx->hflip = ctrl->val;
+ break;
+
+ case V4L2_CID_VFLIP:
+ ctx->vflip = ctrl->val;
+ break;
+
+ case V4L2_CID_ROTATE:
+ ctx->rotation = ctrl->val;
+ break;
+
+ case V4L2_CID_ALPHA_COMPONENT:
+ ctx->d_frame.alpha = ctrl->val;
+ break;
+ }
+
+ ctx->state |= SCALER_PARAMS;
+ return 0;
+}
+
+static int scaler_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct scaler_ctx *ctx = ctrl_to_ctx(ctrl);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ctx->scaler_dev->slock, flags);
+ ret = __scaler_s_ctrl(ctx, ctrl);
+ spin_unlock_irqrestore(&ctx->scaler_dev->slock, flags);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops scaler_ctrl_ops = {
+ .try_ctrl = scaler_try_ctrl,
+ .s_ctrl = scaler_s_ctrl,
+};
+
+int scaler_ctrls_create(struct scaler_ctx *ctx)
+{
+ if (ctx->ctrls_rdy) {
+ scaler_dbg(ctx->scaler_dev,
+ "Control handler of this ctx was created already");
+ return 0;
+ }
+
+ v4l2_ctrl_handler_init(&ctx->ctrl_handler, SCALER_MAX_CTRL_NUM);
+
+ ctx->ctrls_scaler.rotate = v4l2_ctrl_new_std(&ctx->ctrl_handler,
+ &scaler_ctrl_ops, V4L2_CID_ROTATE, 0, 270, 90, 0);
+ ctx->ctrls_scaler.hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler,
+ &scaler_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
+ ctx->ctrls_scaler.vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler,
+ &scaler_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
+ ctx->ctrls_scaler.global_alpha = v4l2_ctrl_new_std(&ctx->ctrl_handler,
+ &scaler_ctrl_ops, V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 0);
+
+ ctx->ctrls_rdy = ctx->ctrl_handler.error == 0;
+
+ if (ctx->ctrl_handler.error) {
+ int err = ctx->ctrl_handler.error;
+ v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+ dev_err(&ctx->scaler_dev->pdev->dev,
+ "Failed to create SCALER control handlers");
+ return err;
+ }
+
+ return 0;
+}
+
+void scaler_ctrls_delete(struct scaler_ctx *ctx)
+{
+ if (ctx->ctrls_rdy) {
+ v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+ ctx->ctrls_rdy = false;
+ }
+}
+
+/* The color format (num_comp, num_planes) must be already configured. */
+int scaler_prepare_addr(struct scaler_ctx *ctx, struct vb2_buffer *vb,
+ struct scaler_frame *frame, struct scaler_addr *addr)
+{
+ int ret = 0;
+ u32 pix_size;
+ const struct scaler_fmt *fmt;
+
+ if (vb == NULL || frame == NULL)
+ return -EINVAL;
+
+ pix_size = frame->f_width * frame->f_height;
+ fmt = frame->fmt;
+
+ scaler_dbg(ctx->scaler_dev,
+ "planes= %d, comp= %d, pix_size= %d, fmt = %d\n",
+ fmt->num_planes, fmt->num_comp,
+ pix_size, fmt->scaler_color);
+
+ addr->y = vb2_dma_contig_plane_dma_addr(vb, 0);
+
+ if (fmt->num_planes == 1) {
+ switch (fmt->num_comp) {
+ case 1:
+ addr->cb = 0;
+ addr->cr = 0;
+ break;
+ case 2:
+ /* Decompose Y into Y/Cb */
+ addr->cb = (dma_addr_t)(addr->y + pix_size);
+ addr->cr = 0;
+ break;
+ case 3:
+ /* Decompose Y into Y/Cb/Cr */
+ addr->cb = (dma_addr_t)(addr->y + pix_size);
+ if (SCALER_YUV420 == fmt->color)
+ addr->cr = (dma_addr_t)(addr->cb
+ + (pix_size >> 2));
+ else if (SCALER_YUV422 == fmt->color)
+ addr->cr = (dma_addr_t)(addr->cb
+ + (pix_size >> 1));
+ else /* 444 */
+ addr->cr = (dma_addr_t)(addr->cb + pix_size);
+ break;
+ default:
+ scaler_dbg(ctx->scaler_dev,
+ "Invalid number of color planes\n");
+ return -EINVAL;
+ }
+ } else {
+ if (fmt->num_planes >= 2)
+ addr->cb = vb2_dma_contig_plane_dma_addr(vb, 1);
+
+ if (fmt->num_planes == 3)
+ addr->cr = vb2_dma_contig_plane_dma_addr(vb, 2);
+ }
+
+ if ((fmt->color_order == SCALER_CRCB) && (fmt->num_planes == 3))
+ swap(addr->cb, addr->cr);
+
+ if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type))
+ scaler_dbg(ctx->scaler_dev,
+ "\nIN:ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d\n",
+ addr->y, addr->cb, addr->cr, ret);
+ else
+ scaler_dbg(ctx->scaler_dev,
+ "\nOUT:ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d\n",
+ addr->y, addr->cb, addr->cr, ret);
+
+ return ret;
+}
+
+static void scaler_sw_reset(struct scaler_dev *scaler)
+{
+ scaler_hw_set_sw_reset(scaler);
+ scaler_wait_reset(scaler);
+
+ scaler->coeff_type = SCALER_CSC_COEFF_NONE;
+}
+
+static void scaler_check_for_illegal_status(struct device *dev,
+ unsigned int irq_status)
+{
+ int i;
+
+ for (i = 0; i < SCALER_NUM_ERRORS; i++)
+ if ((1 << scaler_errors[i].irq_num) & irq_status)
+ dev_err(dev, "ERROR:: %s\n", scaler_errors[i].name);
+}
+
+static irqreturn_t scaler_irq_handler(int irq, void *priv)
+{
+ struct scaler_dev *scaler = priv;
+ struct scaler_ctx *ctx;
+ unsigned int scaler_irq;
+ struct device *dev = &scaler->pdev->dev;
+
+ scaler_irq = scaler_hw_get_irq_status(scaler);
+ scaler_dbg(scaler, "irq_status: 0x%x\n", scaler_irq);
+ scaler_hw_clear_irq(scaler, scaler_irq);
+
+ if (scaler_irq & SCALER_INT_STATUS_ERROR)
+ scaler_check_for_illegal_status(dev, scaler_irq);
+
+ if (!(scaler_irq & (1 << SCALER_INT_FRAME_END)))
+ return IRQ_HANDLED;
+
+ spin_lock(&scaler->slock);
+
+ if (test_and_clear_bit(ST_M2M_PEND, &scaler->state)) {
+
+ scaler_hw_enable_control(scaler, false);
+
+ if (test_and_clear_bit(ST_M2M_SUSPENDING, &scaler->state)) {
+ set_bit(ST_M2M_SUSPENDED, &scaler->state);
+ wake_up(&scaler->irq_queue);
+ goto isr_unlock;
+ }
+ ctx = v4l2_m2m_get_curr_priv(scaler->m2m.m2m_dev);
+
+ if (!ctx || !ctx->m2m_ctx)
+ goto isr_unlock;
+
+ spin_unlock(&scaler->slock);
+ scaler_m2m_job_finish(ctx, VB2_BUF_STATE_DONE);
+
+ /* wake_up job_abort, stop_streaming */
+ if (ctx->state & SCALER_CTX_STOP_REQ) {
+ ctx->state &= ~SCALER_CTX_STOP_REQ;
+ wake_up(&scaler->irq_queue);
+ }
+ return IRQ_HANDLED;
+ }
+
+isr_unlock:
+ spin_unlock(&scaler->slock);
+ return IRQ_HANDLED;
+}
+
+static struct scaler_frm_limit scaler_frm_limit_5410 = {
+ .min_w = 4,
+ .min_h = 4,
+ .max_w = 4096,
+ .max_h = 4096,
+};
+
+static struct scaler_frm_limit scaler_inp_frm_limit_5420 = {
+ .min_w = 16,
+ .min_h = 16,
+ .max_w = 8192,
+ .max_h = 8192,
+};
+
+static struct scaler_frm_limit scaler_out_frm_limit_5420 = {
+ .min_w = 4,
+ .min_h = 4,
+ .max_w = 8192,
+ .max_h = 8192,
+};
+
+static struct scaler_pix_align scaler_align_info = {
+ .src_w_420 = 2,
+ .src_w_422 = 2,
+ .src_h_420 = 2,
+ .dst_w_420 = 2,
+ .dst_w_422 = 2,
+ .dst_h_420 = 2,
+};
+
+
+static struct scaler_variant scaler_variant_info_5410 = {
+ .pix_in = &scaler_frm_limit_5410,
+ .pix_out = &scaler_frm_limit_5410,
+ .pix_align = &scaler_align_info,
+ .scl_up_max = 16,
+ .scl_down_max = 4,
+ .in_buf_cnt = 32,
+ .out_buf_cnt = 32,
+};
+
+static struct scaler_variant scaler_variant_info_5420 = {
+ .pix_in = &scaler_inp_frm_limit_5420,
+ .pix_out = &scaler_out_frm_limit_5420,
+ .pix_align = &scaler_align_info,
+ .scl_up_max = 16,
+ .scl_down_max = 4,
+ .in_buf_cnt = 32,
+ .out_buf_cnt = 32,
+};
+
+static const struct of_device_id exynos_scaler_match[] = {
+ {
+ .compatible = "samsung,exynos5410-scaler",
+ .data = &scaler_variant_info_5410,
+ },
+ {
+ .compatible = "samsung,exynos5420-scaler",
+ .data = &scaler_variant_info_5420,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_scaler_match);
+
+static void *scaler_get_variant_data(struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(exynos_scaler_match, pdev->dev.of_node);
+ if (match)
+ return (void *)match->data;
+ }
+
+ return NULL;
+}
+
+static void scaler_clk_put(struct scaler_dev *scaler)
+{
+ if (!IS_ERR(scaler->clock))
+ clk_unprepare(scaler->clock);
+}
+
+static int scaler_clk_get(struct scaler_dev *scaler)
+{
+ int ret;
+
+ scaler_dbg(scaler, "scaler_clk_get Called\n");
+
+ scaler->clock = devm_clk_get(&scaler->pdev->dev,
+ SCALER_CLOCK_GATE_NAME);
+ if (IS_ERR(scaler->clock)) {
+ dev_err(&scaler->pdev->dev, "failed to get clock: %s\n",
+ SCALER_CLOCK_GATE_NAME);
+ return PTR_ERR(scaler->clock);
+ }
+
+ ret = clk_prepare(scaler->clock);
+ if (ret < 0) {
+ dev_err(&scaler->pdev->dev,
+ "clock prepare fail for clock: %s\n",
+ SCALER_CLOCK_GATE_NAME);
+ scaler->clock = ERR_PTR(-EINVAL);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int scaler_m2m_suspend(struct scaler_dev *scaler)
+{
+ unsigned long flags;
+ int timeout;
+
+ spin_lock_irqsave(&scaler->slock, flags);
+ if (!scaler_m2m_pending(scaler)) {
+ spin_unlock_irqrestore(&scaler->slock, flags);
+ return 0;
+ }
+ clear_bit(ST_M2M_SUSPENDED, &scaler->state);
+ set_bit(ST_M2M_SUSPENDING, &scaler->state);
+ spin_unlock_irqrestore(&scaler->slock, flags);
+
+ timeout = wait_event_timeout(scaler->irq_queue,
+ test_bit(ST_M2M_SUSPENDED, &scaler->state),
+ SCALER_SHUTDOWN_TIMEOUT);
+
+ clear_bit(ST_M2M_SUSPENDING, &scaler->state);
+ return timeout == 0 ? -EAGAIN : 0;
+}
+
+static int scaler_m2m_resume(struct scaler_dev *scaler)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&scaler->slock, flags);
+ /* Clear for full H/W setup in first run after resume */
+ scaler->m2m.ctx = NULL;
+ spin_unlock_irqrestore(&scaler->slock, flags);
+
+ if (test_and_clear_bit(ST_M2M_SUSPENDED, &scaler->state))
+ scaler_m2m_job_finish(scaler->m2m.ctx,
+ VB2_BUF_STATE_ERROR);
+ return 0;
+}
+
+static int scaler_probe(struct platform_device *pdev)
+{
+ struct scaler_dev *scaler;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ if (!dev->of_node)
+ return -ENODEV;
+
+ scaler = devm_kzalloc(dev, sizeof(*scaler), GFP_KERNEL);
+ if (!scaler)
+ return -ENOMEM;
+
+ scaler->pdev = pdev;
+ scaler->variant = scaler_get_variant_data(pdev);
+
+ init_waitqueue_head(&scaler->irq_queue);
+ spin_lock_init(&scaler->slock);
+ mutex_init(&scaler->lock);
+ scaler->clock = ERR_PTR(-EINVAL);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ scaler->regs = devm_request_and_ioremap(dev, res);
+ if (!scaler->regs)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "failed to get IRQ resource\n");
+ return -ENXIO;
+ }
+
+ ret = scaler_clk_get(scaler);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_request_irq(dev, res->start, scaler_irq_handler,
+ 0, pdev->name, scaler);
+ if (ret < 0) {
+ dev_err(dev, "failed to install irq (%d)\n", ret);
+ goto err_clk;
+ }
+
+ platform_set_drvdata(pdev, scaler);
+ pm_runtime_enable(dev);
+
+ /* Initialize the continious memory allocator */
+ scaler->alloc_ctx = vb2_dma_contig_init_ctx(dev);
+ if (IS_ERR(scaler->alloc_ctx)) {
+ ret = PTR_ERR(scaler->alloc_ctx);
+ goto err_clk;
+ }
+
+ ret = v4l2_device_register(dev, &scaler->v4l2_dev);
+ if (ret < 0)
+ goto err_clk;
+
+ ret = scaler_register_m2m_device(scaler);
+ if (ret < 0)
+ goto err_v4l2;
+
+ dev_info(dev, "registered successfully\n");
+ return 0;
+
+err_v4l2:
+ v4l2_device_unregister(&scaler->v4l2_dev);
+err_clk:
+ scaler_clk_put(scaler);
+ return ret;
+}
+
+static int scaler_remove(struct platform_device *pdev)
+{
+ struct scaler_dev *scaler = platform_get_drvdata(pdev);
+
+ scaler_unregister_m2m_device(scaler);
+ v4l2_device_unregister(&scaler->v4l2_dev);
+
+ vb2_dma_contig_cleanup_ctx(scaler->alloc_ctx);
+ pm_runtime_disable(&pdev->dev);
+ scaler_clk_put(scaler);
+
+ scaler_dbg(scaler, "%s driver unloaded\n", pdev->name);
+ return 0;
+}
+
+static int scaler_runtime_resume(struct device *dev)
+{
+ struct scaler_dev *scaler = dev_get_drvdata(dev);
+ int ret;
+
+ scaler_dbg(scaler, "state: 0x%lx", scaler->state);
+
+ ret = clk_enable(scaler->clock);
+ if (ret < 0)
+ return ret;
+
+ scaler_sw_reset(scaler);
+
+ return scaler_m2m_resume(scaler);
+}
+
+static int scaler_runtime_suspend(struct device *dev)
+{
+ struct scaler_dev *scaler = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scaler_m2m_suspend(scaler);
+ if (!ret)
+ clk_disable(scaler->clock);
+
+ scaler_dbg(scaler, "state: 0x%lx", scaler->state);
+ return ret;
+}
+
+static int scaler_resume(struct device *dev)
+{
+ struct scaler_dev *scaler = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ scaler_dbg(scaler, "state: 0x%lx", scaler->state);
+
+ /* Do not resume if the device was idle before system suspend */
+ spin_lock_irqsave(&scaler->slock, flags);
+ if (!test_and_clear_bit(ST_SUSPEND, &scaler->state) ||
+ !scaler_m2m_active(scaler)) {
+ spin_unlock_irqrestore(&scaler->slock, flags);
+ return 0;
+ }
+
+ scaler_sw_reset(scaler);
+ spin_unlock_irqrestore(&scaler->slock, flags);
+
+ return scaler_m2m_resume(scaler);
+}
+
+static int scaler_suspend(struct device *dev)
+{
+ struct scaler_dev *scaler = dev_get_drvdata(dev);
+
+ scaler_dbg(scaler, "state: 0x%lx", scaler->state);
+
+ if (test_and_set_bit(ST_SUSPEND, &scaler->state))
+ return 0;
+
+ return scaler_m2m_suspend(scaler);
+}
+
+static const struct dev_pm_ops scaler_pm_ops = {
+ .suspend = scaler_suspend,
+ .resume = scaler_resume,
+ .runtime_suspend = scaler_runtime_suspend,
+ .runtime_resume = scaler_runtime_resume,
+};
+
+static struct platform_driver scaler_driver = {
+ .probe = scaler_probe,
+ .remove = scaler_remove,
+ .driver = {
+ .name = SCALER_MODULE_NAME,
+ .owner = THIS_MODULE,
+ .pm = &scaler_pm_ops,
+ .of_match_table = exynos_scaler_match,
+ }
+};
+
+module_platform_driver(scaler_driver);
+
+MODULE_AUTHOR("Shaik Ameer Basha <shaik.ameer@samsung.com>");
+MODULE_DESCRIPTION("Samsung EXYNOS5 Soc series SCALER driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,376 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for Samsung EXYNOS5 SoC series SCALER driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SCALER_CORE_H_
+#define SCALER_CORE_H_
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/videobuf2-dma-contig.h>
+
+#define scaler_dbg(_dev, fmt, args...) dev_dbg(&_dev->pdev->dev, fmt, ##args)
+
+#define SCALER_MODULE_NAME "exynos5-scaler"
+
+#define SCALER_SHUTDOWN_TIMEOUT ((100 * HZ) / 1000)
+#define SCALER_MAX_DEVS 4
+#define SCALER_MAX_CTRL_NUM 10
+#define SCALER_SC_ALIGN_4 4
+#define SCALER_SC_ALIGN_2 2
+#define DEFAULT_CSC_EQ 1
+#define DEFAULT_CSC_RANGE 1
+#define SCALER_MAX_PLANES 3
+
+#define SCALER_PARAMS (1 << 0)
+#define SCALER_CTX_STOP_REQ (1 << 1)
+
+/* color format */
+#define SCALER_RGB (0x1 << 0)
+#define SCALER_YUV420 (0x1 << 1)
+#define SCALER_YUV422 (0x1 << 2)
+#define SCALER_YUV444 (0x1 << 3)
+
+/* yuv color order */
+#define SCALER_CBCR 0
+#define SCALER_CRCB 1
+
+#define SCALER_YUV420_2P_Y_UV 0
+#define SCALER_YUV422_2P_Y_UV 2
+#define SCALER_YUV444_2P_Y_UV 3
+#define SCALER_RGB565 4
+#define SCALER_ARGB1555 5
+#define SCALER_ARGB8888 6
+#define SCALER_PREMULTIPLIED_ARGB8888 7
+#define SCALER_YUV422_1P_YVYU 9
+#define SCALER_YUV422_1P_YUYV 10
+#define SCALER_YUV422_1P_UYVY 11
+#define SCALER_ARGB4444 12
+#define SCALER_L8A8 13
+#define SCALER_RGBA8888 14
+#define SCALER_L8 15
+#define SCALER_YUV420_2P_Y_VU 16
+#define SCALER_YUV422_2P_Y_VU 18
+#define SCALER_YUV444_2P_Y_VU 19
+#define SCALER_YUV420_3P_Y_U_V 20
+#define SCALER_YUV422_3P_Y_U_V 22
+#define SCALER_YUV444_3P_Y_U_V 23
+
+#define SCALER_FMT_SRC (0x1 << 0)
+#define SCALER_FMT_DST (0x1 << 1)
+#define SCALER_FMT_TILED (0x1 << 2)
+
+enum scaler_dev_flags {
+ /* for global */
+ ST_SUSPEND,
+
+ /* for m2m node */
+ ST_M2M_OPEN,
+ ST_M2M_RUN,
+ ST_M2M_PEND,
+ ST_M2M_SUSPENDED,
+ ST_M2M_SUSPENDING,
+};
+
+#define fh_to_ctx(__fh) container_of(__fh, struct scaler_ctx, fh)
+#define is_rgb(fmt) (!!(((fmt)->color) & SCALER_RGB))
+#define is_yuv(fmt) ((fmt->color >= SCALER_YUV420) && \
+ (fmt->color <= SCALER_YUV444))
+#define is_yuv420(fmt) (!!((fmt->color) & SCALER_YUV420))
+#define is_yuv422(fmt) (!!((fmt->color) & SCALER_YUV422))
+#define is_yuv422_1p(fmt) (is_yuv422(fmt) && (fmt->num_planes == 1))
+#define is_yuv420_2p(fmt) (is_yuv420(fmt) && (fmt->num_planes == 2))
+#define is_yuv422_2p(fmt) (is_yuv422(fmt) && (fmt->num_planes == 2))
+#define is_yuv42x_2p(fmt) (is_yuv420_2p(fmt) || is_yuv422_2p(fmt))
+#define is_src_fmt(fmt) ((fmt->flags) & SCALER_FMT_SRC)
+#define is_dst_fmt(fmt) ((fmt->flags) & SCALER_FMT_DST)
+#define is_tiled_fmt(fmt) ((fmt->flags) & SCALER_FMT_TILED)
+
+#define scaler_m2m_active(dev) test_bit(ST_M2M_RUN, &(dev)->state)
+#define scaler_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state)
+#define scaler_m2m_opened(dev) test_bit(ST_M2M_OPEN, &(dev)->state)
+
+#define ctrl_to_ctx(__ctrl) \
+ container_of((__ctrl)->handler, struct scaler_ctx, ctrl_handler)
+/**
+ * struct scaler_fmt - the driver's internal color format data
+ * @scaler_color: SCALER color format
+ * @name: format description
+ * @pixelformat: the fourcc code for this format, 0 if not applicable
+ * @color_order: Chrominance order control
+ * @num_planes: number of physically non-contiguous data planes
+ * @num_comp: number of physically contiguous data planes
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @flags: flags indicating which operation mode format applies to
+ */
+struct scaler_fmt {
+ u32 scaler_color;
+ char *name;
+ u32 pixelformat;
+ u32 color;
+ u32 color_order;
+ u16 num_planes;
+ u16 num_comp;
+ u8 depth[SCALER_MAX_PLANES];
+ u32 flags;
+};
+
+/**
+ * struct scaler_input_buf - the driver's video buffer
+ * @vb: videobuf2 buffer
+ * @list : linked list structure for buffer queue
+ * @idx : index of SCALER input buffer
+ */
+struct scaler_input_buf {
+ struct vb2_buffer vb;
+ struct list_head list;
+ int idx;
+};
+
+/**
+ * struct scaler_addr - the SCALER DMA address set
+ * @y: luminance plane address
+ * @cb: Cb plane address
+ * @cr: Cr plane address
+ */
+struct scaler_addr {
+ dma_addr_t y;
+ dma_addr_t cb;
+ dma_addr_t cr;
+};
+
+/**
+ * struct scaler_ctrls - the SCALER control set
+ * @rotate: rotation degree
+ * @hflip: horizontal flip
+ * @vflip: vertical flip
+ * @global_alpha: the alpha value of current frame
+ */
+struct scaler_ctrls {
+ struct v4l2_ctrl *rotate;
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vflip;
+ struct v4l2_ctrl *global_alpha;
+};
+
+/* struct scaler_csc_info - color space conversion information */
+enum scaler_csc_coeff {
+ SCALER_CSC_COEFF_YCBCR_TO_RGB,
+ SCALER_CSC_COEFF_RGB_TO_YCBCR,
+ SCALER_CSC_COEFF_MAX,
+ SCALER_CSC_COEFF_NONE,
+};
+
+struct scaler_csc_info {
+ enum scaler_csc_coeff coeff_type;
+};
+
+/**
+ * struct scaler_scaler - the configuration data for SCALER inetrnal scaler
+ * @hratio: the main scaler's horizontal ratio
+ * @vratio: the main scaler's vertical ratio
+ */
+struct scaler_scaler {
+ u32 hratio;
+ u32 vratio;
+};
+
+struct scaler_dev;
+struct scaler_ctx;
+
+/**
+ * struct scaler_frame - source/target frame properties
+ * @f_width: SRC : SRCIMG_WIDTH, DST : OUTPUTDMA_WHOLE_IMG_WIDTH
+ * @f_height: SRC : SRCIMG_HEIGHT, DST : OUTPUTDMA_WHOLE_IMG_HEIGHT
+ * @selection: crop(source)/compose(destination) size
+ * @payload: image size in bytes (w x h x bpp)
+ * @addr: image frame buffer DMA addresses
+ * @fmt: SCALER color format pointer
+ * @colorspace: value indicating v4l2_colorspace
+ * @alpha: frame's alpha value
+ */
+struct scaler_frame {
+ u32 f_width;
+ u32 f_height;
+ struct v4l2_rect selection;
+ unsigned long payload[SCALER_MAX_PLANES];
+ struct scaler_addr addr;
+ const struct scaler_fmt *fmt;
+ u32 colorspace;
+ u8 alpha;
+};
+
+/**
+ * struct scaler_m2m_device - v4l2 memory-to-memory device data
+ * @vfd: the video device node for v4l2 m2m mode
+ * @m2m_dev: v4l2 memory-to-memory device data
+ * @ctx: hardware context data
+ */
+struct scaler_m2m_device {
+ struct video_device *vfd;
+ struct v4l2_m2m_dev *m2m_dev;
+ struct scaler_ctx *ctx;
+};
+
+/* struct scaler_pix_input - image pixel size limits for input frame */
+struct scaler_frm_limit {
+ u16 min_w;
+ u16 min_h;
+ u16 max_w;
+ u16 max_h;
+
+};
+
+struct scaler_pix_align {
+ u16 src_w_420;
+ u16 src_w_422;
+ u16 src_h_420;
+ u16 dst_w_420;
+ u16 dst_w_422;
+ u16 dst_h_420;
+};
+
+/* struct scaler_variant - SCALER variant information */
+struct scaler_variant {
+ struct scaler_frm_limit *pix_in;
+ struct scaler_frm_limit *pix_out;
+ struct scaler_pix_align *pix_align;
+ u16 scl_up_max;
+ u16 scl_down_max;
+ u16 in_buf_cnt;
+ u16 out_buf_cnt;
+};
+
+/**
+ * struct scaler_dev - abstraction for SCALER entity
+ * @slock: the spinlock protecting this data structure
+ * @lock: the mutex protecting this data structure
+ * @pdev: pointer to the SCALER platform device
+ * @variant: the IP variant information
+ * @id: SCALER device index (0..SCALER_MAX_DEVS)
+ * @clock: clocks required for SCALER operation
+ * @regs: the mapped hardware registers
+ * @irq_queue: interrupt handler waitqueue
+ * @m2m: memory-to-memory V4L2 device information
+ * @state: flags used to synchronize m2m and capture mode operation
+ * @alloc_ctx: videobuf2 memory allocator context
+ * @vdev: video device for SCALER instance
+ */
+struct scaler_dev {
+ spinlock_t slock;
+ struct mutex lock;
+ struct platform_device *pdev;
+ struct scaler_variant *variant;
+ struct clk *clock;
+ void __iomem *regs;
+ wait_queue_head_t irq_queue;
+ struct scaler_m2m_device m2m;
+ unsigned long state;
+ struct vb2_alloc_ctx *alloc_ctx;
+ struct video_device vdev;
+ struct v4l2_device v4l2_dev;
+ enum scaler_csc_coeff coeff_type;
+};
+
+/**
+ * scaler_ctx - the device context data
+ * @s_frame: source frame properties
+ * @d_frame: destination frame properties
+ * @scaler: image scaler properties
+ * @flags: additional flags for image conversion
+ * @state: flags to keep track of user configuration
+ * @scaler_dev: the SCALER device this context applies to
+ * @m2m_ctx: memory-to-memory device context
+ * @fh: v4l2 file handle
+ * @ctrl_handler: v4l2 controls handler
+ * @ctrls_scaler: SCALER control set
+ * @ctrls_rdy: true if the control handler is initialized
+ */
+struct scaler_ctx {
+ struct scaler_frame s_frame;
+ struct scaler_frame d_frame;
+ struct scaler_scaler scaler;
+ u32 flags;
+ u32 state;
+ int rotation;
+ unsigned int hflip:1;
+ unsigned int vflip:1;
+ struct scaler_dev *scaler_dev;
+ struct v4l2_m2m_ctx *m2m_ctx;
+ struct v4l2_fh fh;
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct scaler_ctrls ctrls_scaler;
+ bool ctrls_rdy;
+};
+
+static inline void scaler_ctx_state_lock_set(u32 state, struct scaler_ctx *ctx)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctx->scaler_dev->slock, flags);
+ ctx->state |= state;
+ spin_unlock_irqrestore(&ctx->scaler_dev->slock, flags);
+}
+
+static inline void scaler_ctx_state_lock_clear(u32 state,
+ struct scaler_ctx *ctx)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctx->scaler_dev->slock, flags);
+ ctx->state &= ~state;
+ spin_unlock_irqrestore(&ctx->scaler_dev->slock, flags);
+}
+
+static inline bool scaler_ctx_state_is_set(u32 mask, struct scaler_ctx *ctx)
+{
+ unsigned long flags;
+ bool ret;
+
+ spin_lock_irqsave(&ctx->scaler_dev->slock, flags);
+ ret = (ctx->state & mask) == mask;
+ spin_unlock_irqrestore(&ctx->scaler_dev->slock, flags);
+ return ret;
+}
+
+void scaler_set_prefbuf(struct scaler_dev *scaler, struct scaler_frame *frm);
+int scaler_register_m2m_device(struct scaler_dev *scaler);
+void scaler_unregister_m2m_device(struct scaler_dev *scaler);
+void scaler_m2m_job_finish(struct scaler_ctx *ctx, int vb_state);
+u32 get_plane_size(struct scaler_frame *fr, unsigned int plane);
+const struct scaler_fmt *scaler_get_format(int index);
+const struct scaler_fmt *scaler_find_fmt(u32 *pixelformat, int index);
+struct scaler_frame *ctx_get_frame(struct scaler_ctx *ctx,
+ enum v4l2_buf_type type);
+int scaler_enum_fmt_mplane(struct v4l2_fmtdesc *f);
+int scaler_try_fmt_mplane(struct scaler_ctx *ctx, struct v4l2_format *f);
+void scaler_set_frame_size(struct scaler_frame *frame, int width, int height);
+int scaler_g_fmt_mplane(struct scaler_ctx *ctx, struct v4l2_format *f);
+void scaler_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h);
+int scaler_g_crop(struct scaler_ctx *ctx, struct v4l2_crop *cr);
+int scaler_try_crop(struct scaler_ctx *ctx, struct v4l2_crop *cr);
+int scaler_cal_prescaler_ratio(struct scaler_variant *var, u32 src, u32 dst,
+ u32 *ratio);
+void scaler_get_prescaler_shfactor(u32 hratio, u32 vratio, u32 *sh);
+void scaler_check_src_scale_info(struct scaler_variant *var,
+ struct scaler_frame *s_frame,
+ u32 *wratio, u32 tx, u32 ty, u32 *hratio);
+int scaler_check_scaler_ratio(struct scaler_variant *var, int sw, int sh,
+ int dw, int dh, int rot);
+int scaler_set_scaler_info(struct scaler_ctx *ctx);
+int scaler_ctrls_create(struct scaler_ctx *ctx);
+void scaler_ctrls_delete(struct scaler_ctx *ctx);
+int scaler_prepare_addr(struct scaler_ctx *ctx, struct vb2_buffer *vb,
+ struct scaler_frame *frame, struct scaler_addr *addr);
+
+#endif /* SCALER_CORE_H_ */