| Message ID | 1389567649-26838-6-git-send-email-m.chehab@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am 13.01.2014 00:00, schrieb Mauro Carvalho Chehab: > We can't lock at pcm close, as it causes circular dependency > lock issues with .init and .fini callbacks. So, move the code > that puts the device on mute to the kthread. > > [ 322.026316] ====================================================== > [ 322.026356] [ INFO: possible circular locking dependency detected ] > [ 322.026397] 3.13.0-rc1+ #24 Not tainted > [ 322.026437] ------------------------------------------------------- > [ 322.026476] khubd/54 is trying to acquire lock: > [ 322.026516] (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > [ 322.026727] > but task is already holding lock: > [ 322.026767] (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > [ 322.027005] > which lock already depends on the new lock. > > [ 322.027045] > the existing dependency chain (in reverse order) is: > [ 322.027084] > -> #2 (register_mutex#3){+.+.+.}: > [ 322.027318] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > [ 322.027401] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > [ 322.027479] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > [ 322.027559] [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > [ 322.027642] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > [ 322.027727] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > [ 322.027814] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > [ 322.027898] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > [ 322.027982] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > [ 322.028063] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > [ 322.028143] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > [ 322.028222] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > [ 322.028302] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > [ 322.028381] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > [ 322.028462] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > [ 322.028540] [<ffffffff81425536>] device_del+0x136/0x1d0 > [ 322.028619] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > [ 322.028698] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > [ 322.028779] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > [ 322.028859] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > [ 322.028940] [<ffffffff81496e95>] hub_thread+0x35/0x170 > [ 322.029019] [<ffffffff8108ea2f>] kthread+0xff/0x120 > [ 322.029099] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > [ 322.029179] > -> #1 (&dev->lock#2){+.+.+.}: > [ 322.029414] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > [ 322.029494] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > [ 322.029572] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > [ 322.029651] [<ffffffffa087122e>] snd_em28xx_pcm_close+0x3e/0x100 [em28xx_alsa] > [ 322.029732] [<ffffffffa048620f>] snd_pcm_release_substream.part.29+0x3f/0x90 [snd_pcm] > [ 322.029816] [<ffffffffa0486340>] snd_pcm_release+0xb0/0xd0 [snd_pcm] > [ 322.029900] [<ffffffff811c9752>] __fput+0xe2/0x230 > [ 322.029979] [<ffffffff811c98ee>] ____fput+0xe/0x10 > [ 322.030057] [<ffffffff8108b64f>] task_work_run+0x9f/0xe0 > [ 322.030135] [<ffffffff81013a81>] do_notify_resume+0x61/0xa0 > [ 322.030223] [<ffffffff816b1c62>] int_signal+0x12/0x17 > [ 322.030294] > -> #0 (&pcm->open_mutex){+.+.+.}: > [ 322.030473] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 > [ 322.030546] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > [ 322.030618] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > [ 322.030689] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > [ 322.030760] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > [ 322.030835] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > [ 322.030913] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > [ 322.030988] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > [ 322.031067] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > [ 322.031146] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > [ 322.031220] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > [ 322.031292] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > [ 322.031363] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > [ 322.031433] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > [ 322.031503] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > [ 322.031573] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > [ 322.031643] [<ffffffff81425536>] device_del+0x136/0x1d0 > [ 322.031714] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > [ 322.031784] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > [ 322.031853] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > [ 322.031922] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > [ 322.031992] [<ffffffff81496e95>] hub_thread+0x35/0x170 > [ 322.032062] [<ffffffff8108ea2f>] kthread+0xff/0x120 > [ 322.032135] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > [ 322.032205] > other info that might help us debug this: > > [ 322.032240] Chain exists of: > &pcm->open_mutex --> &dev->lock#2 --> register_mutex#3 > > [ 322.032547] Possible unsafe locking scenario: > > [ 322.032582] CPU0 CPU1 > [ 322.032616] ---- ---- > [ 322.032654] lock(register_mutex#3); > [ 322.032793] lock(&dev->lock#2); > [ 322.032929] lock(register_mutex#3); > [ 322.033064] lock(&pcm->open_mutex); > [ 322.033168] > *** DEADLOCK *** > > [ 322.033204] 6 locks held by khubd/54: > [ 322.033239] #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81496564>] hub_events+0xb4/0x9b0 > [ 322.033446] #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81493076>] usb_disconnect+0x66/0x1d0 > [ 322.033655] #2: (&__lockdep_no_validate__){......}, at: [<ffffffff8142929d>] device_release_driver+0x1d/0x40 > [ 322.033859] #3: (em28xx_devlist_mutex){+.+.+.}, at: [<ffffffffa085cb77>] em28xx_close_extension+0x27/0x90 [em28xx] > [ 322.034067] #4: (&dev->lock#2){+.+.+.}, at: [<ffffffffa085cb81>] em28xx_close_extension+0x31/0x90 [em28xx] > [ 322.034307] #5: (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > [ 322.034552] > stack backtrace: > [ 322.034588] CPU: 3 PID: 54 Comm: khubd Not tainted 3.13.0-rc1+ #24 > [ 322.034624] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P04ABI.013.130220.dg 02/20/2013 > [ 322.034659] ffffffff82513770 ffff880221bcd7c8 ffffffff816a03c6 ffffffff8250a810 > [ 322.034832] ffff880221bcd808 ffffffff8169a203 ffff880221bcd830 0000000000000005 > [ 322.035004] ffff8802222b2880 ffff8802222b3020 ffff8802222b3020 0000000000000006 > [ 322.035187] Call Trace: > [ 322.035230] [<ffffffff816a03c6>] dump_stack+0x45/0x56 > [ 322.035276] [<ffffffff8169a203>] print_circular_bug+0x200/0x20e > [ 322.035320] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 > [ 322.035365] [<ffffffff8101b303>] ? native_sched_clock+0x13/0x80 > [ 322.035409] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > [ 322.035454] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > [ 322.035500] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > [ 322.035550] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > [ 322.035596] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > [ 322.035648] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > [ 322.035697] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 > [ 322.035744] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > [ 322.035797] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > [ 322.035852] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > [ 322.035904] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > [ 322.035957] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > [ 322.036008] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > [ 322.036054] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > [ 322.036100] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > [ 322.036144] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > [ 322.036188] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > [ 322.036231] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > [ 322.036274] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > [ 322.036318] [<ffffffff81425536>] device_del+0x136/0x1d0 > [ 322.036361] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > [ 322.036404] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > [ 322.036447] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > [ 322.036492] [<ffffffff8149cb04>] ? usb_control_msg+0xd4/0x110 > [ 322.036535] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > [ 322.036579] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 > [ 322.036623] [<ffffffff81496e95>] hub_thread+0x35/0x170 > [ 322.036667] [<ffffffff810af310>] ? abort_exclusive_wait+0xb0/0xb0 > [ 322.036711] [<ffffffff81496e60>] ? hub_events+0x9b0/0x9b0 > [ 322.036756] [<ffffffff8108ea2f>] kthread+0xff/0x120 > [ 322.036802] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 > [ 322.036846] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > [ 322.036890] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 > > Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> > --- > drivers/media/usb/em28xx/em28xx-audio.c | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c > index cdc2fcf3e05e..5e16fcf18cac 100644 > --- a/drivers/media/usb/em28xx/em28xx-audio.c > +++ b/drivers/media/usb/em28xx/em28xx-audio.c > @@ -311,20 +311,17 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) > dprintk("closing device\n"); > > dev->mute = 1; > - mutex_lock(&dev->lock); > dev->adev.users--; > if (atomic_read(&dev->stream_started) > 0) { > atomic_set(&dev->stream_started, 0); > schedule_work(&dev->wq_trigger); > } > > - em28xx_audio_analog_set(dev); > if (substream->runtime->dma_area) { > dprintk("freeing\n"); > vfree(substream->runtime->dma_area); > substream->runtime->dma_area = NULL; > } > - mutex_unlock(&dev->lock); > > return 0; > } > @@ -395,6 +392,13 @@ static void audio_trigger(struct work_struct *work) > } else { > dprintk("stopping capture"); > em28xx_deinit_isoc_audio(dev); > + > + /* Mute device if needed */ > + if (dev->mute) { > + mutex_lock(&dev->lock); > + em28xx_audio_analog_set(dev); > + mutex_unlock(&dev->lock); > + } > } > } It's already late and I don't understand this deadlock yet completely, but are you sure this is the proper fix for this issue ? What happens when capturing is restarted ? Shouldn't the device then be unmuted again ? How often does the start/stop/resume happen ? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Em Mon, 13 Jan 2014 22:51:00 +0100 Frank Schäfer <fschaefer.oss@googlemail.com> escreveu: > Am 13.01.2014 00:00, schrieb Mauro Carvalho Chehab: > > We can't lock at pcm close, as it causes circular dependency > > lock issues with .init and .fini callbacks. So, move the code > > that puts the device on mute to the kthread. > > > > [ 322.026316] ====================================================== > > [ 322.026356] [ INFO: possible circular locking dependency detected ] > > [ 322.026397] 3.13.0-rc1+ #24 Not tainted > > [ 322.026437] ------------------------------------------------------- > > [ 322.026476] khubd/54 is trying to acquire lock: > > [ 322.026516] (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > > [ 322.026727] > > but task is already holding lock: > > [ 322.026767] (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > > [ 322.027005] > > which lock already depends on the new lock. > > > > [ 322.027045] > > the existing dependency chain (in reverse order) is: > > [ 322.027084] > > -> #2 (register_mutex#3){+.+.+.}: > > [ 322.027318] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > > [ 322.027401] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > > [ 322.027479] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > > [ 322.027559] [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > > [ 322.027642] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > > [ 322.027727] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > > [ 322.027814] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > > [ 322.027898] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > > [ 322.027982] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > > [ 322.028063] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > > [ 322.028143] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > > [ 322.028222] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > > [ 322.028302] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > > [ 322.028381] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > > [ 322.028462] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > > [ 322.028540] [<ffffffff81425536>] device_del+0x136/0x1d0 > > [ 322.028619] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > > [ 322.028698] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > > [ 322.028779] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > > [ 322.028859] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > > [ 322.028940] [<ffffffff81496e95>] hub_thread+0x35/0x170 > > [ 322.029019] [<ffffffff8108ea2f>] kthread+0xff/0x120 > > [ 322.029099] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > > [ 322.029179] > > -> #1 (&dev->lock#2){+.+.+.}: > > [ 322.029414] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > > [ 322.029494] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > > [ 322.029572] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > > [ 322.029651] [<ffffffffa087122e>] snd_em28xx_pcm_close+0x3e/0x100 [em28xx_alsa] > > [ 322.029732] [<ffffffffa048620f>] snd_pcm_release_substream.part.29+0x3f/0x90 [snd_pcm] > > [ 322.029816] [<ffffffffa0486340>] snd_pcm_release+0xb0/0xd0 [snd_pcm] > > [ 322.029900] [<ffffffff811c9752>] __fput+0xe2/0x230 > > [ 322.029979] [<ffffffff811c98ee>] ____fput+0xe/0x10 > > [ 322.030057] [<ffffffff8108b64f>] task_work_run+0x9f/0xe0 > > [ 322.030135] [<ffffffff81013a81>] do_notify_resume+0x61/0xa0 > > [ 322.030223] [<ffffffff816b1c62>] int_signal+0x12/0x17 > > [ 322.030294] > > -> #0 (&pcm->open_mutex){+.+.+.}: > > [ 322.030473] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 > > [ 322.030546] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > > [ 322.030618] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > > [ 322.030689] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > > [ 322.030760] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > > [ 322.030835] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > > [ 322.030913] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > > [ 322.030988] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > > [ 322.031067] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > > [ 322.031146] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > > [ 322.031220] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > > [ 322.031292] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > > [ 322.031363] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > > [ 322.031433] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > > [ 322.031503] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > > [ 322.031573] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > > [ 322.031643] [<ffffffff81425536>] device_del+0x136/0x1d0 > > [ 322.031714] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > > [ 322.031784] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > > [ 322.031853] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > > [ 322.031922] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > > [ 322.031992] [<ffffffff81496e95>] hub_thread+0x35/0x170 > > [ 322.032062] [<ffffffff8108ea2f>] kthread+0xff/0x120 > > [ 322.032135] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > > [ 322.032205] > > other info that might help us debug this: > > > > [ 322.032240] Chain exists of: > > &pcm->open_mutex --> &dev->lock#2 --> register_mutex#3 > > > > [ 322.032547] Possible unsafe locking scenario: > > > > [ 322.032582] CPU0 CPU1 > > [ 322.032616] ---- ---- > > [ 322.032654] lock(register_mutex#3); > > [ 322.032793] lock(&dev->lock#2); > > [ 322.032929] lock(register_mutex#3); > > [ 322.033064] lock(&pcm->open_mutex); > > [ 322.033168] > > *** DEADLOCK *** > > > > [ 322.033204] 6 locks held by khubd/54: > > [ 322.033239] #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81496564>] hub_events+0xb4/0x9b0 > > [ 322.033446] #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81493076>] usb_disconnect+0x66/0x1d0 > > [ 322.033655] #2: (&__lockdep_no_validate__){......}, at: [<ffffffff8142929d>] device_release_driver+0x1d/0x40 > > [ 322.033859] #3: (em28xx_devlist_mutex){+.+.+.}, at: [<ffffffffa085cb77>] em28xx_close_extension+0x27/0x90 [em28xx] > > [ 322.034067] #4: (&dev->lock#2){+.+.+.}, at: [<ffffffffa085cb81>] em28xx_close_extension+0x31/0x90 [em28xx] > > [ 322.034307] #5: (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > > [ 322.034552] > > stack backtrace: > > [ 322.034588] CPU: 3 PID: 54 Comm: khubd Not tainted 3.13.0-rc1+ #24 > > [ 322.034624] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P04ABI.013.130220.dg 02/20/2013 > > [ 322.034659] ffffffff82513770 ffff880221bcd7c8 ffffffff816a03c6 ffffffff8250a810 > > [ 322.034832] ffff880221bcd808 ffffffff8169a203 ffff880221bcd830 0000000000000005 > > [ 322.035004] ffff8802222b2880 ffff8802222b3020 ffff8802222b3020 0000000000000006 > > [ 322.035187] Call Trace: > > [ 322.035230] [<ffffffff816a03c6>] dump_stack+0x45/0x56 > > [ 322.035276] [<ffffffff8169a203>] print_circular_bug+0x200/0x20e > > [ 322.035320] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 > > [ 322.035365] [<ffffffff8101b303>] ? native_sched_clock+0x13/0x80 > > [ 322.035409] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > > [ 322.035454] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > > [ 322.035500] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > > [ 322.035550] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > > [ 322.035596] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > > [ 322.035648] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > > [ 322.035697] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 > > [ 322.035744] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > > [ 322.035797] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > > [ 322.035852] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > > [ 322.035904] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > > [ 322.035957] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > > [ 322.036008] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > > [ 322.036054] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > > [ 322.036100] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > > [ 322.036144] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > > [ 322.036188] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > > [ 322.036231] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > > [ 322.036274] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > > [ 322.036318] [<ffffffff81425536>] device_del+0x136/0x1d0 > > [ 322.036361] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > > [ 322.036404] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > > [ 322.036447] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > > [ 322.036492] [<ffffffff8149cb04>] ? usb_control_msg+0xd4/0x110 > > [ 322.036535] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > > [ 322.036579] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 > > [ 322.036623] [<ffffffff81496e95>] hub_thread+0x35/0x170 > > [ 322.036667] [<ffffffff810af310>] ? abort_exclusive_wait+0xb0/0xb0 > > [ 322.036711] [<ffffffff81496e60>] ? hub_events+0x9b0/0x9b0 > > [ 322.036756] [<ffffffff8108ea2f>] kthread+0xff/0x120 > > [ 322.036802] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 > > [ 322.036846] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > > [ 322.036890] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 > > > > Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> > > --- > > drivers/media/usb/em28xx/em28xx-audio.c | 10 +++++++--- > > 1 file changed, 7 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c > > index cdc2fcf3e05e..5e16fcf18cac 100644 > > --- a/drivers/media/usb/em28xx/em28xx-audio.c > > +++ b/drivers/media/usb/em28xx/em28xx-audio.c > > @@ -311,20 +311,17 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) > > dprintk("closing device\n"); > > > > dev->mute = 1; > > - mutex_lock(&dev->lock); > > dev->adev.users--; > > if (atomic_read(&dev->stream_started) > 0) { > > atomic_set(&dev->stream_started, 0); > > schedule_work(&dev->wq_trigger); > > } > > > > - em28xx_audio_analog_set(dev); > > if (substream->runtime->dma_area) { > > dprintk("freeing\n"); > > vfree(substream->runtime->dma_area); > > substream->runtime->dma_area = NULL; > > } > > - mutex_unlock(&dev->lock); > > > > return 0; > > } > > @@ -395,6 +392,13 @@ static void audio_trigger(struct work_struct *work) > > } else { > > dprintk("stopping capture"); > > em28xx_deinit_isoc_audio(dev); > > + > > + /* Mute device if needed */ > > + if (dev->mute) { > > + mutex_lock(&dev->lock); > > + em28xx_audio_analog_set(dev); > > + mutex_unlock(&dev->lock); > > + } > > } > > } > It's already late and I don't understand this deadlock yet completely, > but are you sure this is the proper fix for this issue ? This is one possible way to fix. > What happens when capturing is restarted ? Shouldn't the device then be > unmuted again ? Please note that, inside em28xx-audio.c, only the open callback unmutes the device, and only the close callback sets it to mute. As the close callback ask the work tree to run, the above code will defer mute to when the work queue runs. So, the logic seems equivalent to the existing logic. It should be noticed that we can change that code to always call em28xx_audio_analog_set() there, and remove the code that calls it from snd_em28xx_capture_open(). I can't see any functional changes with such changes. That's said, I remember we spent lots of time at linux-media discussing if the alsa start should automatically unmute a device or just keep it as-is. I don't remember the exact results, but I think we opted to put the unmute code there due to pulseaudio bugs, as, without such code, pulseaudio would change the mixers and make some mess. > How often does the start/stop/resume happen ? At device open, it starts. At device closes, it stops. If a buffer underrun/overrun occurs, it will stop/start, but, in that case, the dev->mute state won't change. Regards, Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 14.01.2014 16:45, Mauro Carvalho Chehab wrote: > Em Mon, 13 Jan 2014 22:51:00 +0100 > Frank Schäfer <fschaefer.oss@googlemail.com> escreveu: > >> Am 13.01.2014 00:00, schrieb Mauro Carvalho Chehab: >>> We can't lock at pcm close, as it causes circular dependency >>> lock issues with .init and .fini callbacks. So, move the code >>> that puts the device on mute to the kthread. >>> >>> [ 322.026316] ====================================================== >>> [ 322.026356] [ INFO: possible circular locking dependency detected ] >>> [ 322.026397] 3.13.0-rc1+ #24 Not tainted >>> [ 322.026437] ------------------------------------------------------- >>> [ 322.026476] khubd/54 is trying to acquire lock: >>> [ 322.026516] (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] >>> [ 322.026727] >>> but task is already holding lock: >>> [ 322.026767] (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] >>> [ 322.027005] >>> which lock already depends on the new lock. >>> >>> [ 322.027045] >>> the existing dependency chain (in reverse order) is: >>> [ 322.027084] >>> -> #2 (register_mutex#3){+.+.+.}: >>> [ 322.027318] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 >>> [ 322.027401] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 >>> [ 322.027479] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 >>> [ 322.027559] [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] >>> [ 322.027642] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] >>> [ 322.027727] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] >>> [ 322.027814] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] >>> [ 322.027898] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] >>> [ 322.027982] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] >>> [ 322.028063] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] >>> [ 322.028143] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] >>> [ 322.028222] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 >>> [ 322.028302] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 >>> [ 322.028381] [<ffffffff814292a5>] device_release_driver+0x25/0x40 >>> [ 322.028462] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 >>> [ 322.028540] [<ffffffff81425536>] device_del+0x136/0x1d0 >>> [ 322.028619] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 >>> [ 322.028698] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 >>> [ 322.028779] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 >>> [ 322.028859] [<ffffffff814967c3>] hub_events+0x313/0x9b0 >>> [ 322.028940] [<ffffffff81496e95>] hub_thread+0x35/0x170 >>> [ 322.029019] [<ffffffff8108ea2f>] kthread+0xff/0x120 >>> [ 322.029099] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 >>> [ 322.029179] >>> -> #1 (&dev->lock#2){+.+.+.}: >>> [ 322.029414] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 >>> [ 322.029494] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 >>> [ 322.029572] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 >>> [ 322.029651] [<ffffffffa087122e>] snd_em28xx_pcm_close+0x3e/0x100 [em28xx_alsa] >>> [ 322.029732] [<ffffffffa048620f>] snd_pcm_release_substream.part.29+0x3f/0x90 [snd_pcm] >>> [ 322.029816] [<ffffffffa0486340>] snd_pcm_release+0xb0/0xd0 [snd_pcm] >>> [ 322.029900] [<ffffffff811c9752>] __fput+0xe2/0x230 >>> [ 322.029979] [<ffffffff811c98ee>] ____fput+0xe/0x10 >>> [ 322.030057] [<ffffffff8108b64f>] task_work_run+0x9f/0xe0 >>> [ 322.030135] [<ffffffff81013a81>] do_notify_resume+0x61/0xa0 >>> [ 322.030223] [<ffffffff816b1c62>] int_signal+0x12/0x17 >>> [ 322.030294] >>> -> #0 (&pcm->open_mutex){+.+.+.}: >>> [ 322.030473] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 >>> [ 322.030546] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 >>> [ 322.030618] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 >>> [ 322.030689] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 >>> [ 322.030760] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] >>> [ 322.030835] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] >>> [ 322.030913] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] >>> [ 322.030988] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] >>> [ 322.031067] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] >>> [ 322.031146] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] >>> [ 322.031220] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] >>> [ 322.031292] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] >>> [ 322.031363] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 >>> [ 322.031433] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 >>> [ 322.031503] [<ffffffff814292a5>] device_release_driver+0x25/0x40 >>> [ 322.031573] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 >>> [ 322.031643] [<ffffffff81425536>] device_del+0x136/0x1d0 >>> [ 322.031714] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 >>> [ 322.031784] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 >>> [ 322.031853] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 >>> [ 322.031922] [<ffffffff814967c3>] hub_events+0x313/0x9b0 >>> [ 322.031992] [<ffffffff81496e95>] hub_thread+0x35/0x170 >>> [ 322.032062] [<ffffffff8108ea2f>] kthread+0xff/0x120 >>> [ 322.032135] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 >>> [ 322.032205] >>> other info that might help us debug this: >>> >>> [ 322.032240] Chain exists of: >>> &pcm->open_mutex --> &dev->lock#2 --> register_mutex#3 >>> >>> [ 322.032547] Possible unsafe locking scenario: >>> >>> [ 322.032582] CPU0 CPU1 >>> [ 322.032616] ---- ---- >>> [ 322.032654] lock(register_mutex#3); >>> [ 322.032793] lock(&dev->lock#2); >>> [ 322.032929] lock(register_mutex#3); >>> [ 322.033064] lock(&pcm->open_mutex); >>> [ 322.033168] >>> *** DEADLOCK *** I don't get it. Where is the deadlock here ??? Mauro, be honest: did you understand what's going on here ? >>> >>> [ 322.033204] 6 locks held by khubd/54: >>> [ 322.033239] #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81496564>] hub_events+0xb4/0x9b0 >>> [ 322.033446] #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81493076>] usb_disconnect+0x66/0x1d0 >>> [ 322.033655] #2: (&__lockdep_no_validate__){......}, at: [<ffffffff8142929d>] device_release_driver+0x1d/0x40 >>> [ 322.033859] #3: (em28xx_devlist_mutex){+.+.+.}, at: [<ffffffffa085cb77>] em28xx_close_extension+0x27/0x90 [em28xx] >>> [ 322.034067] #4: (&dev->lock#2){+.+.+.}, at: [<ffffffffa085cb81>] em28xx_close_extension+0x31/0x90 [em28xx] >>> [ 322.034307] #5: (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] >>> [ 322.034552] >>> stack backtrace: >>> [ 322.034588] CPU: 3 PID: 54 Comm: khubd Not tainted 3.13.0-rc1+ #24 >>> [ 322.034624] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P04ABI.013.130220.dg 02/20/2013 >>> [ 322.034659] ffffffff82513770 ffff880221bcd7c8 ffffffff816a03c6 ffffffff8250a810 >>> [ 322.034832] ffff880221bcd808 ffffffff8169a203 ffff880221bcd830 0000000000000005 >>> [ 322.035004] ffff8802222b2880 ffff8802222b3020 ffff8802222b3020 0000000000000006 >>> [ 322.035187] Call Trace: >>> [ 322.035230] [<ffffffff816a03c6>] dump_stack+0x45/0x56 >>> [ 322.035276] [<ffffffff8169a203>] print_circular_bug+0x200/0x20e >>> [ 322.035320] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 >>> [ 322.035365] [<ffffffff8101b303>] ? native_sched_clock+0x13/0x80 >>> [ 322.035409] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 >>> [ 322.035454] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 >>> [ 322.035500] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] >>> [ 322.035550] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 >>> [ 322.035596] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] >>> [ 322.035648] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] >>> [ 322.035697] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 >>> [ 322.035744] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] >>> [ 322.035797] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] >>> [ 322.035852] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] >>> [ 322.035904] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] >>> [ 322.035957] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] >>> [ 322.036008] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] >>> [ 322.036054] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] >>> [ 322.036100] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] >>> [ 322.036144] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 >>> [ 322.036188] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 >>> [ 322.036231] [<ffffffff814292a5>] device_release_driver+0x25/0x40 >>> [ 322.036274] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 >>> [ 322.036318] [<ffffffff81425536>] device_del+0x136/0x1d0 >>> [ 322.036361] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 >>> [ 322.036404] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 >>> [ 322.036447] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 >>> [ 322.036492] [<ffffffff8149cb04>] ? usb_control_msg+0xd4/0x110 >>> [ 322.036535] [<ffffffff814967c3>] hub_events+0x313/0x9b0 >>> [ 322.036579] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 >>> [ 322.036623] [<ffffffff81496e95>] hub_thread+0x35/0x170 >>> [ 322.036667] [<ffffffff810af310>] ? abort_exclusive_wait+0xb0/0xb0 >>> [ 322.036711] [<ffffffff81496e60>] ? hub_events+0x9b0/0x9b0 >>> [ 322.036756] [<ffffffff8108ea2f>] kthread+0xff/0x120 >>> [ 322.036802] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 >>> [ 322.036846] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 >>> [ 322.036890] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 >>> >>> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> >>> --- >>> drivers/media/usb/em28xx/em28xx-audio.c | 10 +++++++--- >>> 1 file changed, 7 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c >>> index cdc2fcf3e05e..5e16fcf18cac 100644 >>> --- a/drivers/media/usb/em28xx/em28xx-audio.c >>> +++ b/drivers/media/usb/em28xx/em28xx-audio.c >>> @@ -311,20 +311,17 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) >>> dprintk("closing device\n"); >>> >>> dev->mute = 1; >>> - mutex_lock(&dev->lock); >>> dev->adev.users--; >>> if (atomic_read(&dev->stream_started) > 0) { >>> atomic_set(&dev->stream_started, 0); >>> schedule_work(&dev->wq_trigger); >>> } >>> >>> - em28xx_audio_analog_set(dev); >>> if (substream->runtime->dma_area) { >>> dprintk("freeing\n"); >>> vfree(substream->runtime->dma_area); >>> substream->runtime->dma_area = NULL; >>> } >>> - mutex_unlock(&dev->lock); >>> >>> return 0; >>> } >>> @@ -395,6 +392,13 @@ static void audio_trigger(struct work_struct *work) >>> } else { >>> dprintk("stopping capture"); >>> em28xx_deinit_isoc_audio(dev); >>> + >>> + /* Mute device if needed */ >>> + if (dev->mute) { >>> + mutex_lock(&dev->lock); >>> + em28xx_audio_analog_set(dev); >>> + mutex_unlock(&dev->lock); >>> + } >>> } >>> } After thinking about this for a while: Does your patch [PATCH] em28xx: push mutex down to extensions on .fini callback which you've sent afterwards fix this warning, too ? >> It's already late and I don't understand this deadlock yet completely, >> but are you sure this is the proper fix for this issue ? > This is one possible way to fix. > >> What happens when capturing is restarted ? Shouldn't the device then be >> unmuted again ? > Please note that, inside em28xx-audio.c, only the open callback unmutes > the device, and only the close callback sets it to mute. > > As the close callback ask the work tree to run, the above code will > defer mute to when the work queue runs. > > So, the logic seems equivalent to the existing logic. > > It should be noticed that we can change that code to always call > em28xx_audio_analog_set() there, and remove the code that calls > it from snd_em28xx_capture_open(). > > I can't see any functional changes with such changes. > > That's said, I remember we spent lots of time at linux-media > discussing if the alsa start should automatically unmute a > device or just keep it as-is. > > I don't remember the exact results, but I think we opted to put the > unmute code there due to pulseaudio bugs, as, without such code, > pulseaudio would change the mixers and make some mess. >> >> >> How often does the start/stop/resume happen ? > At device open, it starts. At device closes, it stops. > > If a buffer underrun/overrun occurs, it will stop/start, but, > in that case, the dev->mute state won't change. True, but if dev->mute=1, you are calling em28xx_audio_analog_set(dev) again and again. That's crap. Yes, Sometimes dirty workarounds are needed for the sake of fixing bugs. But I prefer to understand what's wrong before coming up with solution. Of course, I can't force anybody to spend more time on this and I don't have the hardware to reproduce/investigate this issue. So it seems I lost. Regards, Frank > > Regards, > > Cheers, > Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Em Tue, 14 Jan 2014 19:43:53 +0100 Frank Schäfer <fschaefer.oss@googlemail.com> escreveu: > On 14.01.2014 16:45, Mauro Carvalho Chehab wrote: > > Em Mon, 13 Jan 2014 22:51:00 +0100 > > Frank Schäfer <fschaefer.oss@googlemail.com> escreveu: > > > >> Am 13.01.2014 00:00, schrieb Mauro Carvalho Chehab: > >>> We can't lock at pcm close, as it causes circular dependency > >>> lock issues with .init and .fini callbacks. So, move the code > >>> that puts the device on mute to the kthread. > >>> > >>> [ 322.026316] ====================================================== > >>> [ 322.026356] [ INFO: possible circular locking dependency detected ] > >>> [ 322.026397] 3.13.0-rc1+ #24 Not tainted > >>> [ 322.026437] ------------------------------------------------------- > >>> [ 322.026476] khubd/54 is trying to acquire lock: > >>> [ 322.026516] (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > >>> [ 322.026727] > >>> but task is already holding lock: > >>> [ 322.026767] (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > >>> [ 322.027005] > >>> which lock already depends on the new lock. > >>> > >>> [ 322.027045] > >>> the existing dependency chain (in reverse order) is: > >>> [ 322.027084] > >>> -> #2 (register_mutex#3){+.+.+.}: > >>> [ 322.027318] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > >>> [ 322.027401] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > >>> [ 322.027479] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > >>> [ 322.027559] [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > >>> [ 322.027642] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > >>> [ 322.027727] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > >>> [ 322.027814] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > >>> [ 322.027898] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > >>> [ 322.027982] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > >>> [ 322.028063] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > >>> [ 322.028143] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > >>> [ 322.028222] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > >>> [ 322.028302] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > >>> [ 322.028381] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > >>> [ 322.028462] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > >>> [ 322.028540] [<ffffffff81425536>] device_del+0x136/0x1d0 > >>> [ 322.028619] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > >>> [ 322.028698] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > >>> [ 322.028779] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > >>> [ 322.028859] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > >>> [ 322.028940] [<ffffffff81496e95>] hub_thread+0x35/0x170 > >>> [ 322.029019] [<ffffffff8108ea2f>] kthread+0xff/0x120 > >>> [ 322.029099] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > >>> [ 322.029179] > >>> -> #1 (&dev->lock#2){+.+.+.}: > >>> [ 322.029414] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > >>> [ 322.029494] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > >>> [ 322.029572] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > >>> [ 322.029651] [<ffffffffa087122e>] snd_em28xx_pcm_close+0x3e/0x100 [em28xx_alsa] > >>> [ 322.029732] [<ffffffffa048620f>] snd_pcm_release_substream.part.29+0x3f/0x90 [snd_pcm] > >>> [ 322.029816] [<ffffffffa0486340>] snd_pcm_release+0xb0/0xd0 [snd_pcm] > >>> [ 322.029900] [<ffffffff811c9752>] __fput+0xe2/0x230 > >>> [ 322.029979] [<ffffffff811c98ee>] ____fput+0xe/0x10 > >>> [ 322.030057] [<ffffffff8108b64f>] task_work_run+0x9f/0xe0 > >>> [ 322.030135] [<ffffffff81013a81>] do_notify_resume+0x61/0xa0 > >>> [ 322.030223] [<ffffffff816b1c62>] int_signal+0x12/0x17 > >>> [ 322.030294] > >>> -> #0 (&pcm->open_mutex){+.+.+.}: > >>> [ 322.030473] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 > >>> [ 322.030546] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > >>> [ 322.030618] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > >>> [ 322.030689] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > >>> [ 322.030760] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > >>> [ 322.030835] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > >>> [ 322.030913] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > >>> [ 322.030988] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > >>> [ 322.031067] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > >>> [ 322.031146] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > >>> [ 322.031220] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > >>> [ 322.031292] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > >>> [ 322.031363] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > >>> [ 322.031433] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > >>> [ 322.031503] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > >>> [ 322.031573] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > >>> [ 322.031643] [<ffffffff81425536>] device_del+0x136/0x1d0 > >>> [ 322.031714] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > >>> [ 322.031784] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > >>> [ 322.031853] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > >>> [ 322.031922] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > >>> [ 322.031992] [<ffffffff81496e95>] hub_thread+0x35/0x170 > >>> [ 322.032062] [<ffffffff8108ea2f>] kthread+0xff/0x120 > >>> [ 322.032135] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > >>> [ 322.032205] > >>> other info that might help us debug this: > >>> > >>> [ 322.032240] Chain exists of: > >>> &pcm->open_mutex --> &dev->lock#2 --> register_mutex#3 > >>> > >>> [ 322.032547] Possible unsafe locking scenario: > >>> > >>> [ 322.032582] CPU0 CPU1 > >>> [ 322.032616] ---- ---- > >>> [ 322.032654] lock(register_mutex#3); > >>> [ 322.032793] lock(&dev->lock#2); > >>> [ 322.032929] lock(register_mutex#3); > >>> [ 322.033064] lock(&pcm->open_mutex); > >>> [ 322.033168] > >>> *** DEADLOCK *** > I don't get it. Where is the deadlock here ??? > Mauro, be honest: did you understand what's going on here ? > > >>> > >>> [ 322.033204] 6 locks held by khubd/54: > >>> [ 322.033239] #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81496564>] hub_events+0xb4/0x9b0 > >>> [ 322.033446] #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81493076>] usb_disconnect+0x66/0x1d0 > >>> [ 322.033655] #2: (&__lockdep_no_validate__){......}, at: [<ffffffff8142929d>] device_release_driver+0x1d/0x40 > >>> [ 322.033859] #3: (em28xx_devlist_mutex){+.+.+.}, at: [<ffffffffa085cb77>] em28xx_close_extension+0x27/0x90 [em28xx] > >>> [ 322.034067] #4: (&dev->lock#2){+.+.+.}, at: [<ffffffffa085cb81>] em28xx_close_extension+0x31/0x90 [em28xx] > >>> [ 322.034307] #5: (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] > >>> [ 322.034552] > >>> stack backtrace: > >>> [ 322.034588] CPU: 3 PID: 54 Comm: khubd Not tainted 3.13.0-rc1+ #24 > >>> [ 322.034624] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P04ABI.013.130220.dg 02/20/2013 > >>> [ 322.034659] ffffffff82513770 ffff880221bcd7c8 ffffffff816a03c6 ffffffff8250a810 > >>> [ 322.034832] ffff880221bcd808 ffffffff8169a203 ffff880221bcd830 0000000000000005 > >>> [ 322.035004] ffff8802222b2880 ffff8802222b3020 ffff8802222b3020 0000000000000006 > >>> [ 322.035187] Call Trace: > >>> [ 322.035230] [<ffffffff816a03c6>] dump_stack+0x45/0x56 > >>> [ 322.035276] [<ffffffff8169a203>] print_circular_bug+0x200/0x20e > >>> [ 322.035320] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 > >>> [ 322.035365] [<ffffffff8101b303>] ? native_sched_clock+0x13/0x80 > >>> [ 322.035409] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 > >>> [ 322.035454] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 > >>> [ 322.035500] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > >>> [ 322.035550] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 > >>> [ 322.035596] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > >>> [ 322.035648] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > >>> [ 322.035697] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 > >>> [ 322.035744] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] > >>> [ 322.035797] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] > >>> [ 322.035852] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] > >>> [ 322.035904] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] > >>> [ 322.035957] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] > >>> [ 322.036008] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] > >>> [ 322.036054] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] > >>> [ 322.036100] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] > >>> [ 322.036144] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 > >>> [ 322.036188] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 > >>> [ 322.036231] [<ffffffff814292a5>] device_release_driver+0x25/0x40 > >>> [ 322.036274] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 > >>> [ 322.036318] [<ffffffff81425536>] device_del+0x136/0x1d0 > >>> [ 322.036361] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 > >>> [ 322.036404] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 > >>> [ 322.036447] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 > >>> [ 322.036492] [<ffffffff8149cb04>] ? usb_control_msg+0xd4/0x110 > >>> [ 322.036535] [<ffffffff814967c3>] hub_events+0x313/0x9b0 > >>> [ 322.036579] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 > >>> [ 322.036623] [<ffffffff81496e95>] hub_thread+0x35/0x170 > >>> [ 322.036667] [<ffffffff810af310>] ? abort_exclusive_wait+0xb0/0xb0 > >>> [ 322.036711] [<ffffffff81496e60>] ? hub_events+0x9b0/0x9b0 > >>> [ 322.036756] [<ffffffff8108ea2f>] kthread+0xff/0x120 > >>> [ 322.036802] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 > >>> [ 322.036846] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 > >>> [ 322.036890] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 > >>> > >>> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> > >>> --- > >>> drivers/media/usb/em28xx/em28xx-audio.c | 10 +++++++--- > >>> 1 file changed, 7 insertions(+), 3 deletions(-) > >>> > >>> diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c > >>> index cdc2fcf3e05e..5e16fcf18cac 100644 > >>> --- a/drivers/media/usb/em28xx/em28xx-audio.c > >>> +++ b/drivers/media/usb/em28xx/em28xx-audio.c > >>> @@ -311,20 +311,17 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) > >>> dprintk("closing device\n"); > >>> > >>> dev->mute = 1; > >>> - mutex_lock(&dev->lock); > >>> dev->adev.users--; > >>> if (atomic_read(&dev->stream_started) > 0) { > >>> atomic_set(&dev->stream_started, 0); > >>> schedule_work(&dev->wq_trigger); > >>> } > >>> > >>> - em28xx_audio_analog_set(dev); > >>> if (substream->runtime->dma_area) { > >>> dprintk("freeing\n"); > >>> vfree(substream->runtime->dma_area); > >>> substream->runtime->dma_area = NULL; > >>> } > >>> - mutex_unlock(&dev->lock); > >>> > >>> return 0; > >>> } > >>> @@ -395,6 +392,13 @@ static void audio_trigger(struct work_struct *work) > >>> } else { > >>> dprintk("stopping capture"); > >>> em28xx_deinit_isoc_audio(dev); > >>> + > >>> + /* Mute device if needed */ > >>> + if (dev->mute) { > >>> + mutex_lock(&dev->lock); > >>> + em28xx_audio_analog_set(dev); > >>> + mutex_unlock(&dev->lock); > >>> + } > >>> } > >>> } > After thinking about this for a while: > Does your patch > > [PATCH] em28xx: push mutex down to extensions on .fini callback > > which you've sent afterwards fix this warning, too ? Yes, the above patch fixed the circular lock issues. I dropped this patch. The only patch pending to be applied on this series is patch 4.
Am 14.01.2014 20:59, schrieb Mauro Carvalho Chehab: >> After thinking about this for a while: >> > Does your patch >> > >> > [PATCH] em28xx: push mutex down to extensions on .fini callback >> > >> > which you've sent afterwards fix this warning, too ? > Yes, the above patch fixed the circular lock issues. Ok, great, one problem less. :-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c index cdc2fcf3e05e..5e16fcf18cac 100644 --- a/drivers/media/usb/em28xx/em28xx-audio.c +++ b/drivers/media/usb/em28xx/em28xx-audio.c @@ -311,20 +311,17 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) dprintk("closing device\n"); dev->mute = 1; - mutex_lock(&dev->lock); dev->adev.users--; if (atomic_read(&dev->stream_started) > 0) { atomic_set(&dev->stream_started, 0); schedule_work(&dev->wq_trigger); } - em28xx_audio_analog_set(dev); if (substream->runtime->dma_area) { dprintk("freeing\n"); vfree(substream->runtime->dma_area); substream->runtime->dma_area = NULL; } - mutex_unlock(&dev->lock); return 0; } @@ -395,6 +392,13 @@ static void audio_trigger(struct work_struct *work) } else { dprintk("stopping capture"); em28xx_deinit_isoc_audio(dev); + + /* Mute device if needed */ + if (dev->mute) { + mutex_lock(&dev->lock); + em28xx_audio_analog_set(dev); + mutex_unlock(&dev->lock); + } } }
We can't lock at pcm close, as it causes circular dependency lock issues with .init and .fini callbacks. So, move the code that puts the device on mute to the kthread. [ 322.026316] ====================================================== [ 322.026356] [ INFO: possible circular locking dependency detected ] [ 322.026397] 3.13.0-rc1+ #24 Not tainted [ 322.026437] ------------------------------------------------------- [ 322.026476] khubd/54 is trying to acquire lock: [ 322.026516] (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] [ 322.026727] but task is already holding lock: [ 322.026767] (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] [ 322.027005] which lock already depends on the new lock. [ 322.027045] the existing dependency chain (in reverse order) is: [ 322.027084] -> #2 (register_mutex#3){+.+.+.}: [ 322.027318] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 [ 322.027401] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 [ 322.027479] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 [ 322.027559] [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] [ 322.027642] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] [ 322.027727] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] [ 322.027814] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] [ 322.027898] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] [ 322.027982] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] [ 322.028063] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] [ 322.028143] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] [ 322.028222] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 [ 322.028302] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 [ 322.028381] [<ffffffff814292a5>] device_release_driver+0x25/0x40 [ 322.028462] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 [ 322.028540] [<ffffffff81425536>] device_del+0x136/0x1d0 [ 322.028619] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 [ 322.028698] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 [ 322.028779] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 [ 322.028859] [<ffffffff814967c3>] hub_events+0x313/0x9b0 [ 322.028940] [<ffffffff81496e95>] hub_thread+0x35/0x170 [ 322.029019] [<ffffffff8108ea2f>] kthread+0xff/0x120 [ 322.029099] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 [ 322.029179] -> #1 (&dev->lock#2){+.+.+.}: [ 322.029414] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 [ 322.029494] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 [ 322.029572] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 [ 322.029651] [<ffffffffa087122e>] snd_em28xx_pcm_close+0x3e/0x100 [em28xx_alsa] [ 322.029732] [<ffffffffa048620f>] snd_pcm_release_substream.part.29+0x3f/0x90 [snd_pcm] [ 322.029816] [<ffffffffa0486340>] snd_pcm_release+0xb0/0xd0 [snd_pcm] [ 322.029900] [<ffffffff811c9752>] __fput+0xe2/0x230 [ 322.029979] [<ffffffff811c98ee>] ____fput+0xe/0x10 [ 322.030057] [<ffffffff8108b64f>] task_work_run+0x9f/0xe0 [ 322.030135] [<ffffffff81013a81>] do_notify_resume+0x61/0xa0 [ 322.030223] [<ffffffff816b1c62>] int_signal+0x12/0x17 [ 322.030294] -> #0 (&pcm->open_mutex){+.+.+.}: [ 322.030473] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 [ 322.030546] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 [ 322.030618] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 [ 322.030689] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 [ 322.030760] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] [ 322.030835] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] [ 322.030913] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] [ 322.030988] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] [ 322.031067] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] [ 322.031146] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] [ 322.031220] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] [ 322.031292] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] [ 322.031363] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 [ 322.031433] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 [ 322.031503] [<ffffffff814292a5>] device_release_driver+0x25/0x40 [ 322.031573] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 [ 322.031643] [<ffffffff81425536>] device_del+0x136/0x1d0 [ 322.031714] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 [ 322.031784] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 [ 322.031853] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 [ 322.031922] [<ffffffff814967c3>] hub_events+0x313/0x9b0 [ 322.031992] [<ffffffff81496e95>] hub_thread+0x35/0x170 [ 322.032062] [<ffffffff8108ea2f>] kthread+0xff/0x120 [ 322.032135] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 [ 322.032205] other info that might help us debug this: [ 322.032240] Chain exists of: &pcm->open_mutex --> &dev->lock#2 --> register_mutex#3 [ 322.032547] Possible unsafe locking scenario: [ 322.032582] CPU0 CPU1 [ 322.032616] ---- ---- [ 322.032654] lock(register_mutex#3); [ 322.032793] lock(&dev->lock#2); [ 322.032929] lock(register_mutex#3); [ 322.033064] lock(&pcm->open_mutex); [ 322.033168] *** DEADLOCK *** [ 322.033204] 6 locks held by khubd/54: [ 322.033239] #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81496564>] hub_events+0xb4/0x9b0 [ 322.033446] #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81493076>] usb_disconnect+0x66/0x1d0 [ 322.033655] #2: (&__lockdep_no_validate__){......}, at: [<ffffffff8142929d>] device_release_driver+0x1d/0x40 [ 322.033859] #3: (em28xx_devlist_mutex){+.+.+.}, at: [<ffffffffa085cb77>] em28xx_close_extension+0x27/0x90 [em28xx] [ 322.034067] #4: (&dev->lock#2){+.+.+.}, at: [<ffffffffa085cb81>] em28xx_close_extension+0x31/0x90 [em28xx] [ 322.034307] #5: (register_mutex#3){+.+.+.}, at: [<ffffffffa04819c4>] snd_pcm_dev_disconnect+0x24/0x1e0 [snd_pcm] [ 322.034552] stack backtrace: [ 322.034588] CPU: 3 PID: 54 Comm: khubd Not tainted 3.13.0-rc1+ #24 [ 322.034624] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P04ABI.013.130220.dg 02/20/2013 [ 322.034659] ffffffff82513770 ffff880221bcd7c8 ffffffff816a03c6 ffffffff8250a810 [ 322.034832] ffff880221bcd808 ffffffff8169a203 ffff880221bcd830 0000000000000005 [ 322.035004] ffff8802222b2880 ffff8802222b3020 ffff8802222b3020 0000000000000006 [ 322.035187] Call Trace: [ 322.035230] [<ffffffff816a03c6>] dump_stack+0x45/0x56 [ 322.035276] [<ffffffff8169a203>] print_circular_bug+0x200/0x20e [ 322.035320] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 [ 322.035365] [<ffffffff8101b303>] ? native_sched_clock+0x13/0x80 [ 322.035409] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 [ 322.035454] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 [ 322.035500] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] [ 322.035550] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 [ 322.035596] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] [ 322.035648] [<ffffffffa04819e6>] ? snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] [ 322.035697] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 322.035744] [<ffffffffa04819e6>] snd_pcm_dev_disconnect+0x46/0x1e0 [snd_pcm] [ 322.035797] [<ffffffffa02e855a>] snd_device_disconnect+0x6a/0xf0 [snd] [ 322.035852] [<ffffffffa02e86ac>] snd_device_disconnect_all+0x4c/0x90 [snd] [ 322.035904] [<ffffffffa02e1876>] snd_card_disconnect+0x126/0x1d0 [snd] [ 322.035957] [<ffffffffa02e1ea8>] snd_card_free+0x18/0x90 [snd] [ 322.036008] [<ffffffffa087235f>] em28xx_audio_fini+0x8f/0xa0 [em28xx_alsa] [ 322.036054] [<ffffffffa085cba6>] em28xx_close_extension+0x56/0x90 [em28xx] [ 322.036100] [<ffffffffa085e639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] [ 322.036144] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 [ 322.036188] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 [ 322.036231] [<ffffffff814292a5>] device_release_driver+0x25/0x40 [ 322.036274] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 [ 322.036318] [<ffffffff81425536>] device_del+0x136/0x1d0 [ 322.036361] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 [ 322.036404] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 [ 322.036447] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 [ 322.036492] [<ffffffff8149cb04>] ? usb_control_msg+0xd4/0x110 [ 322.036535] [<ffffffff814967c3>] hub_events+0x313/0x9b0 [ 322.036579] [<ffffffff810b8045>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 322.036623] [<ffffffff81496e95>] hub_thread+0x35/0x170 [ 322.036667] [<ffffffff810af310>] ? abort_exclusive_wait+0xb0/0xb0 [ 322.036711] [<ffffffff81496e60>] ? hub_events+0x9b0/0x9b0 [ 322.036756] [<ffffffff8108ea2f>] kthread+0xff/0x120 [ 322.036802] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 [ 322.036846] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 [ 322.036890] [<ffffffff8108e930>] ? kthread_create_on_node+0x250/0x250 Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> --- drivers/media/usb/em28xx/em28xx-audio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)