new file mode 100644
@@ -0,0 +1,176 @@
+/*
+ * ImgTec IR Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ *
+ * This contains core img-ir code for setting up the driver. The two interfaces
+ * (raw and hardware decode) are handled separately.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "img-ir.h"
+
+static irqreturn_t img_ir_isr(int irq, void *dev_id)
+{
+ struct img_ir_priv *priv = dev_id;
+ u32 irq_status;
+
+ spin_lock(&priv->lock);
+ /* we have to clear irqs before reading */
+ irq_status = img_ir_read(priv, IMG_IR_IRQ_STATUS);
+ img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_status);
+
+ /* don't handle valid data irqs if we're only interested in matches */
+ irq_status &= img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+
+ /* hand off edge interrupts to raw decode handler */
+ if (irq_status & IMG_IR_IRQ_EDGE && img_ir_raw_enabled(&priv->raw))
+ img_ir_isr_raw(priv, irq_status);
+
+ /* hand off hardware match interrupts to hardware decode handler */
+ if (irq_status & (IMG_IR_IRQ_DATA_MATCH |
+ IMG_IR_IRQ_DATA_VALID |
+ IMG_IR_IRQ_DATA2_VALID) &&
+ img_ir_hw_enabled(&priv->hw))
+ img_ir_isr_hw(priv, irq_status);
+
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+}
+
+static void img_ir_setup(struct img_ir_priv *priv)
+{
+ /* start off with interrupts disabled */
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, 0);
+
+ img_ir_setup_raw(priv);
+ img_ir_setup_hw(priv);
+
+ if (!IS_ERR(priv->clk))
+ clk_prepare_enable(priv->clk);
+}
+
+static void img_ir_ident(struct img_ir_priv *priv)
+{
+ u32 core_rev = img_ir_read(priv, IMG_IR_CORE_REV);
+
+ dev_info(priv->dev,
+ "IMG IR Decoder (%d.%d.%d.%d) probed successfully\n",
+ (core_rev & IMG_IR_DESIGNER) >> IMG_IR_DESIGNER_SHIFT,
+ (core_rev & IMG_IR_MAJOR_REV) >> IMG_IR_MAJOR_REV_SHIFT,
+ (core_rev & IMG_IR_MINOR_REV) >> IMG_IR_MINOR_REV_SHIFT,
+ (core_rev & IMG_IR_MAINT_REV) >> IMG_IR_MAINT_REV_SHIFT);
+ dev_info(priv->dev, "Modes:%s%s\n",
+ img_ir_hw_enabled(&priv->hw) ? " hardware" : "",
+ img_ir_raw_enabled(&priv->raw) ? " raw" : "");
+}
+
+static int img_ir_probe(struct platform_device *pdev)
+{
+ struct img_ir_priv *priv;
+ struct resource *res_regs;
+ int irq, error, error2;
+
+ /* Get resources from platform device */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "cannot find IRQ resource\n");
+ return irq;
+ }
+
+ /* Private driver data */
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "cannot allocate device data\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, priv);
+ priv->dev = &pdev->dev;
+ spin_lock_init(&priv->lock);
+
+ /* Ioremap the registers */
+ res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->reg_base = devm_ioremap_resource(&pdev->dev, res_regs);
+ if (IS_ERR(priv->reg_base))
+ return PTR_ERR(priv->reg_base);
+
+ /* Get core clock */
+ priv->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(priv->clk))
+ dev_warn(&pdev->dev, "cannot get core clock resource\n");
+ /*
+ * The driver doesn't need to know about the system ("sys") or power
+ * modulation ("mod") clocks yet
+ */
+
+ /* Set up raw & hw decoder */
+ error = img_ir_probe_raw(priv);
+ error2 = img_ir_probe_hw(priv);
+ if (error && error2)
+ return (error == -ENODEV) ? error2 : error;
+
+ /* Get the IRQ */
+ priv->irq = irq;
+ error = request_irq(priv->irq, img_ir_isr, 0, "img-ir", priv);
+ if (error) {
+ dev_err(&pdev->dev, "cannot register IRQ %u\n",
+ priv->irq);
+ error = -EIO;
+ goto err_irq;
+ }
+
+ img_ir_ident(priv);
+ img_ir_setup(priv);
+
+ return 0;
+
+err_irq:
+ img_ir_remove_hw(priv);
+ img_ir_remove_raw(priv);
+ return error;
+}
+
+static int img_ir_remove(struct platform_device *pdev)
+{
+ struct img_ir_priv *priv = platform_get_drvdata(pdev);
+
+ free_irq(priv->irq, img_ir_isr);
+ img_ir_remove_hw(priv);
+ img_ir_remove_raw(priv);
+
+ if (!IS_ERR(priv->clk))
+ clk_disable_unprepare(priv->clk);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(img_ir_pmops, img_ir_suspend, img_ir_resume);
+
+static const struct of_device_id img_ir_match[] = {
+ { .compatible = "img,ir1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, img_ir_match);
+
+static struct platform_driver img_ir_driver = {
+ .driver = {
+ .name = "img-ir",
+ .owner = THIS_MODULE,
+ .of_match_table = img_ir_match,
+ .pm = &img_ir_pmops,
+ },
+ .probe = img_ir_probe,
+ .remove = img_ir_remove,
+};
+
+module_platform_driver(img_ir_driver);
+
+MODULE_AUTHOR("Imagination Technologies Ltd.");
+MODULE_DESCRIPTION("ImgTec IR");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,166 @@
+/*
+ * ImgTec IR Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_H_
+#define _IMG_IR_H_
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include "img-ir-raw.h"
+#include "img-ir-hw.h"
+
+/* registers */
+
+/* relative to the start of the IR block of registers */
+#define IMG_IR_CONTROL 0x00
+#define IMG_IR_STATUS 0x04
+#define IMG_IR_DATA_LW 0x08
+#define IMG_IR_DATA_UP 0x0c
+#define IMG_IR_LEAD_SYMB_TIMING 0x10
+#define IMG_IR_S00_SYMB_TIMING 0x14
+#define IMG_IR_S01_SYMB_TIMING 0x18
+#define IMG_IR_S10_SYMB_TIMING 0x1c
+#define IMG_IR_S11_SYMB_TIMING 0x20
+#define IMG_IR_FREE_SYMB_TIMING 0x24
+#define IMG_IR_POW_MOD_PARAMS 0x28
+#define IMG_IR_POW_MOD_ENABLE 0x2c
+#define IMG_IR_IRQ_MSG_DATA_LW 0x30
+#define IMG_IR_IRQ_MSG_DATA_UP 0x34
+#define IMG_IR_IRQ_MSG_MASK_LW 0x38
+#define IMG_IR_IRQ_MSG_MASK_UP 0x3c
+#define IMG_IR_IRQ_ENABLE 0x40
+#define IMG_IR_IRQ_STATUS 0x44
+#define IMG_IR_IRQ_CLEAR 0x48
+#define IMG_IR_IRCORE_ID 0xf0
+#define IMG_IR_CORE_REV 0xf4
+#define IMG_IR_CORE_DES1 0xf8
+#define IMG_IR_CORE_DES2 0xfc
+
+
+/* field masks */
+
+/* IMG_IR_CONTROL */
+#define IMG_IR_DECODEN 0x40000000
+#define IMG_IR_CODETYPE 0x30000000
+#define IMG_IR_CODETYPE_SHIFT 28
+#define IMG_IR_HDRTOG 0x08000000
+#define IMG_IR_LDRDEC 0x04000000
+#define IMG_IR_DECODINPOL 0x02000000 /* active high */
+#define IMG_IR_BITORIEN 0x01000000 /* MSB first */
+#define IMG_IR_D1VALIDSEL 0x00008000
+#define IMG_IR_BITINV 0x00000040 /* don't invert */
+#define IMG_IR_DECODEND2 0x00000010
+#define IMG_IR_BITORIEND2 0x00000002 /* MSB first */
+#define IMG_IR_BITINVD2 0x00000001 /* don't invert */
+
+/* IMG_IR_STATUS */
+#define IMG_IR_RXDVALD2 0x00001000
+#define IMG_IR_IRRXD 0x00000400
+#define IMG_IR_TOGSTATE 0x00000200
+#define IMG_IR_RXDVAL 0x00000040
+#define IMG_IR_RXDLEN 0x0000003f
+#define IMG_IR_RXDLEN_SHIFT 0
+
+/* IMG_IR_LEAD_SYMB_TIMING, IMG_IR_Sxx_SYMB_TIMING */
+#define IMG_IR_PD_MAX 0xff000000
+#define IMG_IR_PD_MAX_SHIFT 24
+#define IMG_IR_PD_MIN 0x00ff0000
+#define IMG_IR_PD_MIN_SHIFT 16
+#define IMG_IR_W_MAX 0x0000ff00
+#define IMG_IR_W_MAX_SHIFT 8
+#define IMG_IR_W_MIN 0x000000ff
+#define IMG_IR_W_MIN_SHIFT 0
+
+/* IMG_IR_FREE_SYMB_TIMING */
+#define IMG_IR_MAXLEN 0x0007e000
+#define IMG_IR_MAXLEN_SHIFT 13
+#define IMG_IR_MINLEN 0x00001f00
+#define IMG_IR_MINLEN_SHIFT 8
+#define IMG_IR_FT_MIN 0x000000ff
+#define IMG_IR_FT_MIN_SHIFT 0
+
+/* IMG_IR_POW_MOD_PARAMS */
+#define IMG_IR_PERIOD_LEN 0x3f000000
+#define IMG_IR_PERIOD_LEN_SHIFT 24
+#define IMG_IR_PERIOD_DUTY 0x003f0000
+#define IMG_IR_PERIOD_DUTY_SHIFT 16
+#define IMG_IR_STABLE_STOP 0x00003f00
+#define IMG_IR_STABLE_STOP_SHIFT 8
+#define IMG_IR_STABLE_START 0x0000003f
+#define IMG_IR_STABLE_START_SHIFT 0
+
+/* IMG_IR_POW_MOD_ENABLE */
+#define IMG_IR_POWER_OUT_EN 0x00000002
+#define IMG_IR_POWER_MOD_EN 0x00000001
+
+/* IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_STATUS, IMG_IR_IRQ_CLEAR */
+#define IMG_IR_IRQ_DEC2_ERR 0x00000080
+#define IMG_IR_IRQ_DEC_ERR 0x00000040
+#define IMG_IR_IRQ_ACT_LEVEL 0x00000020
+#define IMG_IR_IRQ_FALL_EDGE 0x00000010
+#define IMG_IR_IRQ_RISE_EDGE 0x00000008
+#define IMG_IR_IRQ_DATA_MATCH 0x00000004
+#define IMG_IR_IRQ_DATA2_VALID 0x00000002
+#define IMG_IR_IRQ_DATA_VALID 0x00000001
+#define IMG_IR_IRQ_ALL 0x000000ff
+#define IMG_IR_IRQ_EDGE (IMG_IR_IRQ_FALL_EDGE | IMG_IR_IRQ_RISE_EDGE)
+
+/* IMG_IR_CORE_ID */
+#define IMG_IR_CORE_ID 0x00ff0000
+#define IMG_IR_CORE_ID_SHIFT 16
+#define IMG_IR_CORE_CONFIG 0x0000ffff
+#define IMG_IR_CORE_CONFIG_SHIFT 0
+
+/* IMG_IR_CORE_REV */
+#define IMG_IR_DESIGNER 0xff000000
+#define IMG_IR_DESIGNER_SHIFT 24
+#define IMG_IR_MAJOR_REV 0x00ff0000
+#define IMG_IR_MAJOR_REV_SHIFT 16
+#define IMG_IR_MINOR_REV 0x0000ff00
+#define IMG_IR_MINOR_REV_SHIFT 8
+#define IMG_IR_MAINT_REV 0x000000ff
+#define IMG_IR_MAINT_REV_SHIFT 0
+
+struct device;
+struct clk;
+
+/**
+ * struct img_ir_priv - Private driver data.
+ * @dev: Platform device.
+ * @irq: IRQ number.
+ * @clk: Input clock.
+ * @reg_base: Iomem base address of IR register block.
+ * @lock: Protects IR registers and variables in this struct.
+ * @raw: Driver data for raw decoder.
+ * @hw: Driver data for hardware decoder.
+ */
+struct img_ir_priv {
+ struct device *dev;
+ int irq;
+ struct clk *clk;
+ void __iomem *reg_base;
+ spinlock_t lock;
+
+ struct img_ir_priv_raw raw;
+ struct img_ir_priv_hw hw;
+};
+
+/* Hardware access */
+
+static inline void img_ir_write(struct img_ir_priv *priv,
+ unsigned int reg_offs, unsigned int data)
+{
+ iowrite32(data, priv->reg_base + reg_offs);
+}
+
+static inline unsigned int img_ir_read(struct img_ir_priv *priv,
+ unsigned int reg_offs)
+{
+ return ioread32(priv->reg_base + reg_offs);
+}
+
+#endif /* _IMG_IR_H_ */
Add base driver for the ImgTec Infrared decoder block. The driver is split into separate components for raw (software) decode and hardware decoder which are in following commits. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org --- v2: - Use new DT binding, with a different compatibility string and get core clock by name. - Remove next pointer from struct img_ir_priv. This is related to the removal of dynamic registration/unregistration of protocol decode timings from later patches. - Add io.h include to img-ir.h. --- drivers/media/rc/img-ir/img-ir-core.c | 176 ++++++++++++++++++++++++++++++++++ drivers/media/rc/img-ir/img-ir.h | 166 ++++++++++++++++++++++++++++++++ 2 files changed, 342 insertions(+) create mode 100644 drivers/media/rc/img-ir/img-ir-core.c create mode 100644 drivers/media/rc/img-ir/img-ir.h