@@ -24,11 +24,6 @@
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
-
-int rtl2832_debug;
-module_param_named(debug, rtl2832_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
#define REG_MASK(b) (BIT(b + 1) - 1)
static const struct rtl2832_reg_entry registers[] = {
@@ -189,8 +184,9 @@ static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
if (ret == 1) {
ret = 0;
} else {
- dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \
- "len=%d\n", KBUILD_MODNAME, ret, reg, len);
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr failed=%d reg=%02x len=%d\n",
+ KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
@@ -218,8 +214,9 @@ static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
if (ret == 2) {
ret = 0;
} else {
- dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \
- "len=%d\n", KBUILD_MODNAME, ret, reg, len);
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c rd failed=%d reg=%02x len=%d\n",
+ KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
@@ -417,7 +414,7 @@ static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq)
ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
- return (ret);
+ return ret;
}
static int rtl2832_init(struct dvb_frontend *fe)
@@ -516,7 +513,8 @@ static int rtl2832_init(struct dvb_frontend *fe)
/*
* r820t NIM code does a software reset here at the demod -
- * may not be needed, as there's already a software reset at set_params()
+ * may not be needed, as there's already a software reset at
+ * set_params()
*/
#if 1
/* soft reset */
@@ -593,9 +591,9 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe)
};
- dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d " \
- "inversion=%d\n", __func__, c->frequency,
- c->bandwidth_hz, c->inversion);
+ dev_dbg(&priv->i2c->dev,
+ "%s: frequency=%d bandwidth_hz=%d inversion=%d\n",
+ __func__, c->frequency, c->bandwidth_hz, c->inversion);
/* program tuner */
if (fe->ops.tuner_ops.set_params)
@@ -51,7 +51,7 @@ struct rtl2832_config {
};
#if IS_ENABLED(CONFIG_DVB_RTL2832)
-extern struct dvb_frontend *rtl2832_attach(
+struct dvb_frontend *rtl2832_attach(
const struct rtl2832_config *cfg,
struct i2c_adapter *i2c
);
@@ -267,7 +267,7 @@ static const struct rtl2832_reg_value rtl2832_tuner_init_tua9001[] = {
{DVBT_OPT_ADC_IQ, 0x1},
{DVBT_AD_AVI, 0x0},
{DVBT_AD_AVQ, 0x0},
- {DVBT_SPEC_INV, 0x0},
+ {DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = {
@@ -301,7 +301,7 @@ static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = {
{DVBT_GI_PGA_STATE, 0x0},
{DVBT_EN_AGC_PGA, 0x1},
{DVBT_IF_AGC_MAN, 0x0},
- {DVBT_SPEC_INV, 0x0},
+ {DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = {
@@ -339,32 +339,32 @@ static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = {
{DVBT_REG_MONSEL, 0x1},
{DVBT_REG_MON, 0x1},
{DVBT_REG_4MSEL, 0x0},
- {DVBT_SPEC_INV, 0x0},
+ {DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_r820t[] = {
- {DVBT_DAGC_TRG_VAL, 0x39},
- {DVBT_AGC_TARG_VAL_0, 0x0},
- {DVBT_AGC_TARG_VAL_8_1, 0x40},
- {DVBT_AAGC_LOOP_GAIN, 0x16},
- {DVBT_LOOP_GAIN2_3_0, 0x8},
- {DVBT_LOOP_GAIN2_4, 0x1},
- {DVBT_LOOP_GAIN3, 0x18},
- {DVBT_VTOP1, 0x35},
- {DVBT_VTOP2, 0x21},
- {DVBT_VTOP3, 0x21},
- {DVBT_KRF1, 0x0},
- {DVBT_KRF2, 0x40},
- {DVBT_KRF3, 0x10},
- {DVBT_KRF4, 0x10},
- {DVBT_IF_AGC_MIN, 0x80},
- {DVBT_IF_AGC_MAX, 0x7f},
- {DVBT_RF_AGC_MIN, 0x80},
- {DVBT_RF_AGC_MAX, 0x7f},
- {DVBT_POLAR_RF_AGC, 0x0},
- {DVBT_POLAR_IF_AGC, 0x0},
- {DVBT_AD7_SETTING, 0xe9f4},
- {DVBT_SPEC_INV, 0x1},
+ {DVBT_DAGC_TRG_VAL, 0x39},
+ {DVBT_AGC_TARG_VAL_0, 0x0},
+ {DVBT_AGC_TARG_VAL_8_1, 0x40},
+ {DVBT_AAGC_LOOP_GAIN, 0x16},
+ {DVBT_LOOP_GAIN2_3_0, 0x8},
+ {DVBT_LOOP_GAIN2_4, 0x1},
+ {DVBT_LOOP_GAIN3, 0x18},
+ {DVBT_VTOP1, 0x35},
+ {DVBT_VTOP2, 0x21},
+ {DVBT_VTOP3, 0x21},
+ {DVBT_KRF1, 0x0},
+ {DVBT_KRF2, 0x40},
+ {DVBT_KRF3, 0x10},
+ {DVBT_KRF4, 0x10},
+ {DVBT_IF_AGC_MIN, 0x80},
+ {DVBT_IF_AGC_MAX, 0x7f},
+ {DVBT_RF_AGC_MIN, 0x80},
+ {DVBT_RF_AGC_MAX, 0x7f},
+ {DVBT_POLAR_RF_AGC, 0x0},
+ {DVBT_POLAR_IF_AGC, 0x0},
+ {DVBT_AD7_SETTING, 0xe9f4},
+ {DVBT_SPEC_INV, 0x1},
};
#endif /* RTL2832_PRIV_H */
Most of those were reported by checkpatch.pl... debug module parameter is not used anywhere so remove it. Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/dvb-frontends/rtl2832.c | 26 +++++++--------- drivers/media/dvb-frontends/rtl2832.h | 2 +- drivers/media/dvb-frontends/rtl2832_priv.h | 50 +++++++++++++++--------------- 3 files changed, 38 insertions(+), 40 deletions(-)