@@ -514,12 +514,6 @@ static int rtl2832_init(struct dvb_frontend *fe)
goto err;
}
- if (!fe->ops.tuner_ops.get_if_frequency) {
- ret = rtl2832_set_if(fe, priv->cfg.if_dvbt);
- if (ret)
- goto err;
- }
-
/*
* r820t NIM code does a software reset here at the demod -
* may not be needed, as there's already a software reset at set_params()
@@ -38,13 +38,6 @@ struct rtl2832_config {
u32 xtal;
/*
- * IFs for all used modes.
- * Hz
- * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000
- */
- u32 if_dvbt;
-
- /*
* tuner
* XXX: This must be keep sync with dvb_usb_rtl28xxu demod driver.
*/
@@ -589,14 +589,12 @@ err:
static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = {
.i2c_addr = 0x10, /* 0x20 */
.xtal = 28800000,
- .if_dvbt = 0,
.tuner = TUNER_RTL2832_FC0012
};
static struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = {
.i2c_addr = 0x10, /* 0x20 */
.xtal = 28800000,
- .if_dvbt = 0,
.tuner = TUNER_RTL2832_FC0013
};
All used tuners has get_if_frequency() callback and that parameter is not needed and will not needed as all upcoming tuner drivers should implement get_if_frequency(). Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/dvb-frontends/rtl2832.c | 6 ------ drivers/media/dvb-frontends/rtl2832.h | 7 ------- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 -- 3 files changed, 15 deletions(-)