diff mbox

[1/9] ARM: lager: enable i2c devices

Message ID 1402862194-17743-2-git-send-email-ben.dooks@codethink.co.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Ben Dooks June 15, 2014, 7:56 p.m. UTC
Add i2c0, i2c1, i2c2 and i2c3 nodes to the Lager reference device tree as
these busses all have devices on them that can be probed even if they
are no drivers yet.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Sergei Shtylyov June 16, 2014, 12:29 p.m. UTC | #1
Hello.

On 06/15/2014 11:56 PM, Ben Dooks wrote:

> Add i2c0, i2c1, i2c2 and i2c3 nodes to the Lager reference device tree as
> these busses all have devices on them that can be probed even if they
> are no drivers yet.

> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
>   arch/arm/boot/dts/r8a7790-lager.dts | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)

> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
> index dd2fe46..8617755 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -317,3 +317,19 @@
>   	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
>   	status = "okay";
>   };
> +
> +&i2c0	{
> +	status = "ok";
> +};
> +
> +&i2c1	{
> +	status = "ok";
> +};
> +
> +&i2c2	{
> +	status = "ok";
> +};
> +
> +&i2c3	{
> +	status = "ok";
> +};

    Against which tree is this patch? It has been merged to Simon's 'devel' 
branch on my request already.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index dd2fe46..8617755 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -317,3 +317,19 @@ 
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&i2c0	{
+	status = "ok";
+};
+
+&i2c1	{
+	status = "ok";
+};
+
+&i2c2	{
+	status = "ok";
+};
+
+&i2c3	{
+	status = "ok";
+};