| Message ID | 1402863436-30311-1-git-send-email-robert.jarzmik@free.fr (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, 15 Jun 2014, Robert Jarzmik wrote: > Add documentation for pxa_camera host interface. As mentioned in another comment: this is driver DT bindings description, not interface documentation. Thanks Guennadi > > Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> > --- > .../devicetree/bindings/media/pxa-camera.txt | 40 ++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/pxa-camera.txt > > diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt > new file mode 100644 > index 0000000..568b63b > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/pxa-camera.txt > @@ -0,0 +1,40 @@ > +Marvell PXA camera host interface > + > +Required properties: > + - compatible: Should be "mrvl,pxa_camera" > + - reg: register base and size > + - interrupts: the interrupt number > + - any required generic properties defined in video-interfaces.txt > + > +Optional properties: > + - mclk_10khz: host interface is driving MCLK, and MCLK rate is mclk_10khz * > + 10000 Hz. > + > +Example: > + > + pxa_camera: pxa_camera@50000000 { > + compatible = "mrvl,pxa_camera"; > + reg = <0x50000000 0x1000>; > + interrupts = <33>; > + > + clocks = <&pxa2xx_clks 24>; > + clock-names = "camera"; > + status = "okay"; > + > + mclk_10khz = <5000>; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* Parallel bus endpoint */ > + qci: endpoint@0 { > + reg = <0>; /* Local endpoint # */ > + remote-endpoint = <&mt9m111_1>; > + bus-width = <8>; /* Used data lines */ > + hsync-active = <0>; /* Active low */ > + vsync-active = <0>; /* Active low */ > + pclk-sample = <1>; /* Rising */ > + }; > + }; > + }; > -- > 2.0.0.rc2 > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt new file mode 100644 index 0000000..568b63b --- /dev/null +++ b/Documentation/devicetree/bindings/media/pxa-camera.txt @@ -0,0 +1,40 @@ +Marvell PXA camera host interface + +Required properties: + - compatible: Should be "mrvl,pxa_camera" + - reg: register base and size + - interrupts: the interrupt number + - any required generic properties defined in video-interfaces.txt + +Optional properties: + - mclk_10khz: host interface is driving MCLK, and MCLK rate is mclk_10khz * + 10000 Hz. + +Example: + + pxa_camera: pxa_camera@50000000 { + compatible = "mrvl,pxa_camera"; + reg = <0x50000000 0x1000>; + interrupts = <33>; + + clocks = <&pxa2xx_clks 24>; + clock-names = "camera"; + status = "okay"; + + mclk_10khz = <5000>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + /* Parallel bus endpoint */ + qci: endpoint@0 { + reg = <0>; /* Local endpoint # */ + remote-endpoint = <&mt9m111_1>; + bus-width = <8>; /* Used data lines */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; + }; + };
Add documentation for pxa_camera host interface. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- .../devicetree/bindings/media/pxa-camera.txt | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/pxa-camera.txt