@@ -56,7 +56,7 @@ struct xc5000_priv {
u32 if_khz;
u16 xtal_khz;
- u32 freq_hz;
+ u32 freq_hz, freq_offset;
u32 bandwidth;
u8 video_standard;
u8 rf_mode;
@@ -749,13 +749,13 @@ static int xc5000_set_params(struct dvb_frontend *fe)
case SYS_ATSC:
dprintk(1, "%s() VSB modulation\n", __func__);
priv->rf_mode = XC_RF_MODE_AIR;
- priv->freq_hz = freq - 1750000;
+ priv->freq_offset = 1750000;
priv->video_standard = DTV6;
break;
case SYS_DVBC_ANNEX_B:
dprintk(1, "%s() QAM modulation\n", __func__);
priv->rf_mode = XC_RF_MODE_CABLE;
- priv->freq_hz = freq - 1750000;
+ priv->freq_offset = 1750000;
priv->video_standard = DTV6;
break;
case SYS_ISDBT:
@@ -770,15 +770,15 @@ static int xc5000_set_params(struct dvb_frontend *fe)
switch (bw) {
case 6000000:
priv->video_standard = DTV6;
- priv->freq_hz = freq - 1750000;
+ priv->freq_offset = 1750000;
break;
case 7000000:
priv->video_standard = DTV7;
- priv->freq_hz = freq - 2250000;
+ priv->freq_offset = 2250000;
break;
case 8000000:
priv->video_standard = DTV8;
- priv->freq_hz = freq - 2750000;
+ priv->freq_offset = 2750000;
break;
default:
printk(KERN_ERR "xc5000 bandwidth not set!\n");
@@ -792,15 +792,15 @@ static int xc5000_set_params(struct dvb_frontend *fe)
priv->rf_mode = XC_RF_MODE_CABLE;
if (bw <= 6000000) {
priv->video_standard = DTV6;
- priv->freq_hz = freq - 1750000;
+ priv->freq_offset = 1750000;
b = 6;
} else if (bw <= 7000000) {
priv->video_standard = DTV7;
- priv->freq_hz = freq - 2250000;
+ priv->freq_offset = 2250000;
b = 7;
} else {
priv->video_standard = DTV7_8;
- priv->freq_hz = freq - 2750000;
+ priv->freq_offset = 2750000;
b = 8;
}
dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__,
@@ -811,6 +811,8 @@ static int xc5000_set_params(struct dvb_frontend *fe)
return -EINVAL;
}
+ priv->freq_hz = freq - priv->freq_offset;
+
dprintk(1, "%s() frequency=%d (compensated to %d)\n",
__func__, freq, priv->freq_hz);
@@ -1061,7 +1063,7 @@ static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
{
struct xc5000_priv *priv = fe->tuner_priv;
dprintk(1, "%s()\n", __func__);
- *freq = priv->freq_hz;
+ *freq = priv->freq_hz + priv->freq_offset;
return 0;
}
The programmed frequency on xc5000 is not the middle frequency, but the initial frequency on the bandwidth range. However, the DVB API works with the middle frequency. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> --- drivers/media/tuners/xc5000.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)