@@ -47,6 +47,7 @@ config VIDEO_CX231XX_DVB
select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT
---help---
This adds support for DVB cards based on the
@@ -352,6 +352,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
case CX231XX_BOARD_CNXT_RDU_253S:
case CX231XX_BOARD_CNXT_VIDEO_GRABBER:
case CX231XX_BOARD_HAUPPAUGE_EXETER:
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
case CX231XX_BOARD_HAUPPAUGE_USBLIVE2:
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
@@ -704,6 +704,45 @@ struct cx231xx_board cx231xx_boards[] = {
}
},
},
+ [CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx] = {
+ .name = "Hauppauge WinTV 930C-HD (1113xx)",
+ .tuner_type = TUNER_NXP_TDA18271,
+ .tuner_addr = 0x60,
+ .tuner_gpio = RDE250_XCV_TUNER,
+ .tuner_sif_gpio = 0x05,
+ .tuner_scl_gpio = 0x1a,
+ .tuner_sda_gpio = 0x1b,
+ .decoder = CX231XX_AVDECODER,
+ .output_mode = OUT_MODE_VIP11,
+ .demod_xfer_mode = 0,
+ .ctl_pin_status_mask = 0xFFFFFFC4,
+ .agc_analog_digital_select_gpio = 0x0c,
+ .gpio_pin_status_mask = 0x4001000,
+ .tuner_i2c_master = 1,
+ .demod_i2c_master = 2,
+ .has_dvb = 1,
+ .demod_addr = 0x0e,
+ .norm = V4L2_STD_PAL,
+
+ .input = {{
+ .type = CX231XX_VMUX_TELEVISION,
+ .vmux = CX231XX_VIN_3_1,
+ .amux = CX231XX_AMUX_VIDEO,
+ .gpio = NULL,
+ }, {
+ .type = CX231XX_VMUX_COMPOSITE1,
+ .vmux = CX231XX_VIN_2_1,
+ .amux = CX231XX_AMUX_LINE_IN,
+ .gpio = NULL,
+ }, {
+ .type = CX231XX_VMUX_SVIDEO,
+ .vmux = CX231XX_VIN_1_1 |
+ (CX231XX_VIN_1_2 << 8) |
+ CX25840_SVIDEO_ON,
+ .amux = CX231XX_AMUX_LINE_IN,
+ .gpio = NULL,
+ } },
+ },
};
const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
@@ -733,6 +772,8 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC},
{USB_DEVICE(0x2040, 0xb120),
.driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
+ {USB_DEVICE(0x2040, 0xb130),
+ .driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx},
{USB_DEVICE(0x2040, 0xb140),
.driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
{USB_DEVICE(0x2040, 0xc200),
@@ -886,6 +927,43 @@ static void cx231xx_config_tuner(struct cx231xx *dev)
}
+static int read_eeprom(struct cx231xx *dev, u8 *eedata, int len)
+{
+ int ret = 0;
+ u8 addr = 0xa0 >> 1;
+ u8 start_offset = 0;
+ int len_todo = len;
+ u8 *eedata_cur = eedata;
+ int i;
+ struct i2c_msg msg_write = { .addr = addr, .flags = 0,
+ .buf = &start_offset, .len = 1 };
+ struct i2c_msg msg_read = { .addr = addr, .flags = I2C_M_RD };
+
+ /* mutex_lock(&dev->i2c_lock); */
+ cx231xx_enable_i2c_port_3(dev, false);
+
+ /* start reading at offset 0 */
+ ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_write, 1);
+
+ while (len_todo > 0) {
+ msg_read.len = (len_todo > 64) ? 64 : len_todo;
+ msg_read.buf = eedata_cur;
+
+ ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_read, 1);
+
+ eedata_cur += msg_read.len;
+ len_todo -= msg_read.len;
+ }
+
+ cx231xx_enable_i2c_port_3(dev, true);
+ /* mutex_unlock(&dev->i2c_lock); */
+
+ for (i = 0; i + 15 < len; i += 16)
+ cx231xx_info("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
+
+ return 0;
+}
+
void cx231xx_card_setup(struct cx231xx *dev)
{
@@ -917,6 +995,20 @@ void cx231xx_card_setup(struct cx231xx *dev)
else
cx231xx_config_tuner(dev);
}
+
+ switch (dev->model) {
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
+ {
+ struct tveeprom tvee;
+ static u8 eeprom[256];
+
+ read_eeprom(dev, eeprom, sizeof(eeprom));
+ tveeprom_hauppauge_analog(&dev->i2c_bus[1].i2c_client,
+ &tvee, eeprom + 0xc0);
+ break;
+ }
+ }
+
}
/*
@@ -726,6 +726,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
break;
case CX231XX_BOARD_HAUPPAUGE_EXETER:
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_DIGITAL);
break;
@@ -744,6 +745,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
case CX231XX_BOARD_CNXT_RDE_253S:
case CX231XX_BOARD_CNXT_RDU_253S:
case CX231XX_BOARD_HAUPPAUGE_EXETER:
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
@@ -1379,6 +1381,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
case CX231XX_BOARD_CNXT_RDE_253S:
case CX231XX_BOARD_CNXT_RDU_253S:
case CX231XX_BOARD_HAUPPAUGE_EXETER:
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
@@ -32,6 +32,7 @@
#include "tda18271.h"
#include "s5h1411.h"
#include "lgdt3305.h"
+#include "si2165.h"
#include "mb86a20s.h"
MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
@@ -152,6 +153,12 @@ static struct tda18271_config pv_tda18271_config = {
.small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
};
+static const struct si2165_config hauppauge_930C_HD_1113xx_si2165_config = {
+ .i2c_addr = 0x64,
+ .chip_mode = SI2165_MODE_PLL_XTAL,
+ .ref_freq_Hz = 16000000,
+};
+
static inline void print_err_status(struct cx231xx *dev, int packet, int status)
{
char *errmsg = "Unknown";
@@ -712,6 +719,33 @@ static int dvb_init(struct cx231xx *dev)
&hcw_tda18271_config);
break;
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
+
+ dev->dvb->frontend = dvb_attach(si2165_attach,
+ &hauppauge_930C_HD_1113xx_si2165_config,
+ &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap
+ );
+
+ if (dev->dvb->frontend == NULL) {
+ printk(DRIVER_NAME
+ ": Failed to attach SI2165 front end\n");
+ result = -EINVAL;
+ goto out_free;
+ }
+
+ dev->dvb->frontend->ops.i2c_gate_ctrl = 0;
+
+ /* define general-purpose callback pointer */
+ dvb->frontend->callback = cx231xx_tuner_callback;
+
+ dvb_attach(tda18271_attach, dev->dvb->frontend,
+ 0x60,
+ &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
+ &hcw_tda18271_config);
+
+ dev->cx231xx_reset_analog_tuner = NULL;
+ break;
+
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID:
@@ -73,6 +73,7 @@
#define CX231XX_BOARD_ELGATO_VIDEO_CAPTURE_V2 16
#define CX231XX_BOARD_OTG102 17
#define CX231XX_BOARD_KWORLD_UB445_USB_HYBRID 18
+#define CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx 19
/* Limits minimum and default number of buffers */
#define CX231XX_MIN_BUF 4
After loading the driver the first open to dvb device node fails. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> --- drivers/media/usb/cx231xx/Kconfig | 1 + drivers/media/usb/cx231xx/cx231xx-avcore.c | 1 + drivers/media/usb/cx231xx/cx231xx-cards.c | 92 ++++++++++++++++++++++++++++++ drivers/media/usb/cx231xx/cx231xx-core.c | 3 + drivers/media/usb/cx231xx/cx231xx-dvb.c | 34 +++++++++++ drivers/media/usb/cx231xx/cx231xx.h | 1 + 6 files changed, 132 insertions(+)