diff mbox

[2/2] au0828: fill tuner type on all boards

Message ID 1408362689-25583-3-git-send-email-m.chehab@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mauro Carvalho Chehab Aug. 18, 2014, 11:51 a.m. UTC 
This is used by the I2C code in order to slow down the
speed to 20 kHz on devices with xc5000 or xc5000c.

So, we need it to be filled for all devices.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 drivers/media/usb/au0828/au0828-cards.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c
index 8f2fc2fe6a89..814cc15e8c2f 100644
--- a/drivers/media/usb/au0828/au0828-cards.c
+++ b/drivers/media/usb/au0828/au0828-cards.c
@@ -97,20 +97,20 @@  struct au0828_board au0828_boards[] = {
 	},
 	[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
 		.name	= "Hauppauge HVR950Q rev xxF8",
-		.tuner_type = UNSET,
-		.tuner_addr = ADDR_UNSET,
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
 		.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 	},
 	[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 		.name	= "DViCO FusionHDTV USB",
-		.tuner_type = UNSET,
-		.tuner_addr = ADDR_UNSET,
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
 		.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 	},
 	[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
 		.name = "Hauppauge Woodbury",
-		.tuner_type = UNSET,
-		.tuner_addr = ADDR_UNSET,
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
 		.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 	},
 };