@@ -440,7 +440,7 @@ static int fm_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
* command with u16 payload - convert to be16
*/
if (payload != NULL)
- *(u16 *)payload = cpu_to_be16(*(u16 *)payload);
+ *(__be16 *)payload = cpu_to_be16(*(u16 *)payload);
} else if (payload != NULL) {
fm_cb(skb)->fm_op = *((u8 *)payload + 2);
@@ -595,7 +595,7 @@ static void fm_irq_handle_flag_getcmd_resp(struct fmdev *fmdev)
skb_pull(skb, sizeof(struct fm_event_msg_hdr));
memcpy(&fmdev->irq_info.flag, skb->data, fm_evt_hdr->dlen);
- fmdev->irq_info.flag = be16_to_cpu(fmdev->irq_info.flag);
+ fmdev->irq_info.flag = be16_to_cpu((__force __be16)fmdev->irq_info.flag);
fmdbg("irq: flag register(0x%x)\n", fmdev->irq_info.flag);
/* Continue next function in interrupt handler table */
@@ -764,7 +764,7 @@ static void fm_irq_handle_rdsdata_getcmd_resp(struct fmdev *fmdev)
* Extract PI code and store in local cache.
* We need this during AF switch processing.
*/
- cur_picode = be16_to_cpu(rds_fmt.data.groupgeneral.pidata);
+ cur_picode = be16_to_cpu((__force __be16)rds_fmt.data.groupgeneral.pidata);
if (fmdev->rx.stat_info.picode != cur_picode)
fmdev->rx.stat_info.picode = cur_picode;
@@ -989,7 +989,7 @@ static void fm_irq_afjump_rd_freq_resp(struct fmdev *fmdev)
/* Skip header info and copy only response data */
skb_pull(skb, sizeof(struct fm_event_msg_hdr));
memcpy(&read_freq, skb->data, sizeof(read_freq));
- read_freq = be16_to_cpu(read_freq);
+ read_freq = be16_to_cpu((__force __be16)read_freq);
curr_freq = fmdev->rx.region.bot_freq + ((u32)read_freq * FM_FREQ_MUL);
jumped_freq = fmdev->rx.stat_info.af_cache[fmdev->rx.afjump_idx];
@@ -1317,7 +1317,8 @@ static int load_default_rx_configuration(struct fmdev *fmdev)
/* Does FM power on sequence */
static int fm_power_up(struct fmdev *fmdev, u8 mode)
{
- u16 payload, asic_id, asic_ver;
+ u16 payload;
+ __be16 asic_id, asic_ver;
int resp_len, ret;
u8 fw_name[50];
@@ -116,7 +116,7 @@ int fm_rx_set_freq(struct fmdev *fmdev, u32 freq)
if (ret < 0)
goto exit;
- curr_frq = be16_to_cpu(curr_frq);
+ curr_frq = be16_to_cpu((__force __be16)curr_frq);
curr_frq_in_khz = (fmdev->rx.region.bot_freq + ((u32)curr_frq * FM_FREQ_MUL));
if (curr_frq_in_khz != freq) {
@@ -189,7 +189,7 @@ int fm_rx_seek(struct fmdev *fmdev, u32 seek_upward,
if (ret < 0)
return ret;
- curr_frq = be16_to_cpu(curr_frq);
+ curr_frq = be16_to_cpu((__force __be16)curr_frq);
last_frq = (fmdev->rx.region.top_freq - fmdev->rx.region.bot_freq) / FM_FREQ_MUL;
/* Check the offset in order to be aligned to the channel spacing*/
@@ -285,7 +285,7 @@ again:
if (ret < 0)
return ret;
- curr_frq = be16_to_cpu(curr_frq);
+ curr_frq = be16_to_cpu((__force __be16)curr_frq);
fmdev->rx.freq = (fmdev->rx.region.bot_freq +
((u32)curr_frq * FM_FREQ_MUL));
@@ -517,7 +517,7 @@ int fm_rx_set_rfdepend_softmute(struct fmdev *fmdev, u8 rfdepend_mute)
/* Returns the signal strength level of current channel */
int fm_rx_get_rssi_level(struct fmdev *fmdev, u16 *rssilvl)
{
- u16 curr_rssi_lel;
+ __be16 curr_rssi_lel;
u32 resp_len;
int ret;
@@ -608,7 +608,7 @@ int fm_rx_set_stereo_mono(struct fmdev *fmdev, u16 mode)
/* Gets current RX stereo/mono mode */
int fm_rx_get_stereo_mono(struct fmdev *fmdev, u16 *mode)
{
- u16 curr_mode;
+ __be16 curr_mode;
u32 resp_len;
int ret;
@@ -374,7 +374,7 @@ int fm_tx_get_tune_cap_val(struct fmdev *fmdev)
if (ret < 0)
return ret;
- curr_val = be16_to_cpu(curr_val);
+ curr_val = be16_to_cpu((__force __be16)curr_val);
return curr_val;
}