@@ -433,7 +433,7 @@ int em28xx_audio_analog_set(struct em28xx *dev)
int ret, i;
u8 xclk;
- if (!dev->audio_mode.has_audio)
+ if (dev->int_audio_type == EM28XX_INT_AUDIO_NONE)
return 0;
/* It is assumed that all devices use master volume for output.
@@ -512,25 +512,25 @@ int em28xx_audio_setup(struct em28xx *dev)
dev->chip_id == CHIP_ID_EM28174 ||
dev->chip_id == CHIP_ID_EM28178) {
/* Digital only device - don't load any alsa module */
- dev->audio_mode.has_audio = false;
+ dev->int_audio_type = EM28XX_INT_AUDIO_NONE;
dev->usb_audio_type = EM28XX_USB_AUDIO_NONE;
return 0;
}
- dev->audio_mode.has_audio = true;
-
/* See how this device is configured */
cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
em28xx_info("Config register raw data: 0x%02x\n", cfg);
if (cfg < 0) {
/* Register read error? */
cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
+ dev->int_audio_type = EM28XX_INT_AUDIO_AC97;
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
/* The device doesn't have vendor audio at all */
- dev->audio_mode.has_audio = false;
+ dev->int_audio_type = EM28XX_INT_AUDIO_NONE;
dev->usb_audio_type = EM28XX_USB_AUDIO_NONE;
return 0;
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
+ dev->int_audio_type = EM28XX_INT_AUDIO_I2S;
if (dev->chip_id < CHIP_ID_EM2860 &&
(cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
EM2820_CHIPCFG_I2S_1_SAMPRATE)
@@ -546,6 +546,8 @@ int em28xx_audio_setup(struct em28xx *dev)
/* Skip the code that does AC97 vendor detection */
dev->audio_mode.ac97 = EM28XX_NO_AC97;
goto init_audio;
+ } else {
+ dev->int_audio_type = EM28XX_INT_AUDIO_AC97;
}
dev->audio_mode.ac97 = EM28XX_AC97_OTHER;
@@ -561,7 +563,7 @@ int em28xx_audio_setup(struct em28xx *dev)
dev->audio_mode.ac97 = EM28XX_NO_AC97;
if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
dev->usb_audio_type = EM28XX_USB_AUDIO_NONE;
- dev->audio_mode.has_audio = false;
+ dev->int_audio_type = EM28XX_INT_AUDIO_NONE;
goto init_audio;
}
@@ -1720,7 +1720,7 @@ static int vidioc_querycap(struct file *file, void *priv,
else
cap->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_VBI_CAPTURE;
- if (dev->audio_mode.has_audio)
+ if (dev->int_audio_type != EM28XX_INT_AUDIO_NONE)
cap->device_caps |= V4L2_CAP_AUDIO;
if (dev->tuner_type != TUNER_ABSENT)
@@ -2514,7 +2514,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
v4l2_disable_ioctl(v4l2->vdev, VIDIOC_G_FREQUENCY);
v4l2_disable_ioctl(v4l2->vdev, VIDIOC_S_FREQUENCY);
}
- if (!dev->audio_mode.has_audio) {
+ if (dev->int_audio_type == EM28XX_INT_AUDIO_NONE) {
v4l2_disable_ioctl(v4l2->vdev, VIDIOC_G_AUDIO);
v4l2_disable_ioctl(v4l2->vdev, VIDIOC_S_AUDIO);
}
@@ -2544,7 +2544,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
v4l2_disable_ioctl(v4l2->vbi_dev, VIDIOC_G_FREQUENCY);
v4l2_disable_ioctl(v4l2->vbi_dev, VIDIOC_S_FREQUENCY);
}
- if (!dev->audio_mode.has_audio) {
+ if (dev->int_audio_type == EM28XX_INT_AUDIO_NONE) {
v4l2_disable_ioctl(v4l2->vbi_dev, VIDIOC_G_AUDIO);
v4l2_disable_ioctl(v4l2->vbi_dev, VIDIOC_S_AUDIO);
}
@@ -309,7 +309,12 @@ enum em28xx_ac97_mode {
struct em28xx_audio_mode {
enum em28xx_ac97_mode ac97;
- unsigned int has_audio:1;
+};
+
+enum em28xx_int_audio_type {
+ EM28XX_INT_AUDIO_NONE = 0,
+ EM28XX_INT_AUDIO_AC97,
+ EM28XX_INT_AUDIO_I2S,
};
enum em28xx_usb_audio_type {
@@ -608,6 +613,7 @@ struct em28xx {
unsigned char disconnected:1; /* device has been diconnected */
unsigned int has_video:1;
unsigned int is_audio_only:1;
+ enum em28xx_int_audio_type int_audio_type;
enum em28xx_usb_audio_type usb_audio_type;
struct em28xx_board board;
Field has_audio in struct em28xx_audio_mode is used together with value EM28XX_NO_AC97 of field ac97 to determine the internal type of audio (none/i2s/ac97). This makes the code difficult to understand: !dev->audio_mode.has_audio && audio_mode.ac97 == EM28XX_NO_AC97 => no audio !dev->audio_mode.has_audio && audio_mode.ac97 != EM28XX_NO_AC97 => BUG dev->audio_mode.has_audio && dev->audio_mode.ac97 == EM28XX_NO_AC97 => AC97 audio dev->audio_mode.has_audio && dev->audio_mode.ac97 != EM28XX_NO_AC97 => I2S audio Simplify the whole thing by introducing an enum em28xx_int_audio_type which describes the internal audio type (none, ac97, i2s) and is hooked directly to the device struct. Then get rid of field has_audio in struct em28xx_audio_mode. A follow-up patch will then remove struct em28xx_ac97_mode and finally the whole struct em28xx_audio_mode. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> --- drivers/media/usb/em28xx/em28xx-core.c | 14 ++++++++------ drivers/media/usb/em28xx/em28xx-video.c | 6 +++--- drivers/media/usb/em28xx/em28xx.h | 8 +++++++- 3 files changed, 18 insertions(+), 10 deletions(-)