| Message ID | 1412140821-16285-11-git-send-email-zzam@gentoo.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Reviewed-by: Antti Palosaari <crope@iki.fi> Antti On 10/01/2014 08:20 AM, Matthias Schwarzott wrote: > change almost all instances of I2C_1 to I2C_1_MUX_3 > > Only these cases are changed to I2C_1_MUX_1: > * All that have dont_use_port_3 set. > * CX231XX_BOARD_HAUPPAUGE_EXETER, old code did explicitly not switch to port3. > * eeprom access for 930C > > Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> > --- > drivers/media/usb/cx231xx/cx231xx-cards.c | 30 +++++++++++++++--------------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c > index f5fb93a..4eb2057 100644 > --- a/drivers/media/usb/cx231xx/cx231xx-cards.c > +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c > @@ -104,7 +104,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x02, > @@ -144,7 +144,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x32, > @@ -184,7 +184,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x1c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x02, > @@ -225,7 +225,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x1c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x02, > @@ -297,7 +297,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x02, > @@ -325,7 +325,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x32, > @@ -353,7 +353,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_1, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x0e, > @@ -419,7 +419,7 @@ struct cx231xx_board cx231xx_boards[] = { > .tuner_sda_gpio = -1, > .gpio_pin_status_mask = 0x4001000, > .tuner_i2c_master = I2C_2, > - .demod_i2c_master = I2C_1, > + .demod_i2c_master = I2C_1_MUX_3, > .ir_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x10, > @@ -457,7 +457,7 @@ struct cx231xx_board cx231xx_boards[] = { > .tuner_sda_gpio = -1, > .gpio_pin_status_mask = 0x4001000, > .tuner_i2c_master = I2C_2, > - .demod_i2c_master = I2C_1, > + .demod_i2c_master = I2C_1_MUX_3, > .ir_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x10, > @@ -495,7 +495,7 @@ struct cx231xx_board cx231xx_boards[] = { > .tuner_sda_gpio = -1, > .gpio_pin_status_mask = 0x4001000, > .tuner_i2c_master = I2C_2, > - .demod_i2c_master = I2C_1, > + .demod_i2c_master = I2C_1_MUX_3, > .ir_i2c_master = I2C_2, > .rc_map_name = RC_MAP_PIXELVIEW_002T, > .has_dvb = 1, > @@ -587,7 +587,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .norm = V4L2_STD_PAL, > > .input = {{ > @@ -622,7 +622,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .norm = V4L2_STD_NTSC, > > .input = {{ > @@ -718,7 +718,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x0e, > @@ -757,7 +757,7 @@ struct cx231xx_board cx231xx_boards[] = { > .ctl_pin_status_mask = 0xFFFFFFC4, > .agc_analog_digital_select_gpio = 0x0c, > .gpio_pin_status_mask = 0x4001000, > - .tuner_i2c_master = I2C_1, > + .tuner_i2c_master = I2C_1_MUX_3, > .demod_i2c_master = I2C_2, > .has_dvb = 1, > .demod_addr = 0x0e, > @@ -1064,7 +1064,7 @@ void cx231xx_card_setup(struct cx231xx *dev) > struct i2c_client client; > > memset(&client, 0, sizeof(client)); > - client.adapter = cx231xx_get_i2c_adap(dev, I2C_1); > + client.adapter = cx231xx_get_i2c_adap(dev, I2C_1_MUX_1); > client.addr = 0xa0 >> 1; > > read_eeprom(dev, &client, eeprom, sizeof(eeprom)); >
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index f5fb93a..4eb2057 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -104,7 +104,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x02, @@ -144,7 +144,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x32, @@ -184,7 +184,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x1c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x02, @@ -225,7 +225,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x1c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x02, @@ -297,7 +297,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x02, @@ -325,7 +325,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x32, @@ -353,7 +353,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_1, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x0e, @@ -419,7 +419,7 @@ struct cx231xx_board cx231xx_boards[] = { .tuner_sda_gpio = -1, .gpio_pin_status_mask = 0x4001000, .tuner_i2c_master = I2C_2, - .demod_i2c_master = I2C_1, + .demod_i2c_master = I2C_1_MUX_3, .ir_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x10, @@ -457,7 +457,7 @@ struct cx231xx_board cx231xx_boards[] = { .tuner_sda_gpio = -1, .gpio_pin_status_mask = 0x4001000, .tuner_i2c_master = I2C_2, - .demod_i2c_master = I2C_1, + .demod_i2c_master = I2C_1_MUX_3, .ir_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x10, @@ -495,7 +495,7 @@ struct cx231xx_board cx231xx_boards[] = { .tuner_sda_gpio = -1, .gpio_pin_status_mask = 0x4001000, .tuner_i2c_master = I2C_2, - .demod_i2c_master = I2C_1, + .demod_i2c_master = I2C_1_MUX_3, .ir_i2c_master = I2C_2, .rc_map_name = RC_MAP_PIXELVIEW_002T, .has_dvb = 1, @@ -587,7 +587,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .norm = V4L2_STD_PAL, .input = {{ @@ -622,7 +622,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .norm = V4L2_STD_NTSC, .input = {{ @@ -718,7 +718,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x0e, @@ -757,7 +757,7 @@ struct cx231xx_board cx231xx_boards[] = { .ctl_pin_status_mask = 0xFFFFFFC4, .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, - .tuner_i2c_master = I2C_1, + .tuner_i2c_master = I2C_1_MUX_3, .demod_i2c_master = I2C_2, .has_dvb = 1, .demod_addr = 0x0e, @@ -1064,7 +1064,7 @@ void cx231xx_card_setup(struct cx231xx *dev) struct i2c_client client; memset(&client, 0, sizeof(client)); - client.adapter = cx231xx_get_i2c_adap(dev, I2C_1); + client.adapter = cx231xx_get_i2c_adap(dev, I2C_1_MUX_1); client.addr = 0xa0 >> 1; read_eeprom(dev, &client, eeprom, sizeof(eeprom));
change almost all instances of I2C_1 to I2C_1_MUX_3 Only these cases are changed to I2C_1_MUX_1: * All that have dont_use_port_3 set. * CX231XX_BOARD_HAUPPAUGE_EXETER, old code did explicitly not switch to port3. * eeprom access for 930C Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> --- drivers/media/usb/cx231xx/cx231xx-cards.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)