diff mbox

[v4,14/14] cx231xx: scan all four existing i2c busses instead of the 3 masters

Message ID 1414699955-5760-15-git-send-email-zzam@gentoo.org (mailing list archive)
State New, archived
Headers show

Commit Message

Matthias Schwarzott Oct. 30, 2014, 8:12 p.m. UTC 
The scanning itself just fails (as before this series) but now the correct busses are scanned.

V2: Changed to symbolic names where muxed adapters can be seen directly.
V3: Comment about scanning busses ordered by physical port numbers.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Reviewed-by: Antti Palosaari <crope@iki.fi>
---
 drivers/media/usb/cx231xx/cx231xx-core.c | 6 ++++++
 drivers/media/usb/cx231xx/cx231xx-i2c.c  | 8 ++++----
 2 files changed, 10 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index c49022f..9b5cd9e 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -1303,6 +1303,12 @@  int cx231xx_dev_init(struct cx231xx *dev)
 	cx231xx_i2c_mux_register(dev, 0);
 	cx231xx_i2c_mux_register(dev, 1);
 
+	/* scan the real bus segments in the order of physical port numbers */
+	cx231xx_do_i2c_scan(dev, I2C_0);
+	cx231xx_do_i2c_scan(dev, I2C_1_MUX_1);
+	cx231xx_do_i2c_scan(dev, I2C_2);
+	cx231xx_do_i2c_scan(dev, I2C_1_MUX_3);
+
 	/* init hardware */
 	/* Note : with out calling set power mode function,
 	afe can not be set up correctly */
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index 3e9dfd8..d1003c7 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -492,6 +492,9 @@  void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
 	int i, rc;
 	struct i2c_client client;
 
+	if (!i2c_scan)
+		return;
+
 	memset(&client, 0, sizeof(client));
 	client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
 
@@ -528,10 +531,7 @@  int cx231xx_i2c_register(struct cx231xx_i2c *bus)
 	i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
 	i2c_add_adapter(&bus->i2c_adap);
 
-	if (0 == bus->i2c_rc) {
-		if (i2c_scan)
-			cx231xx_do_i2c_scan(dev, bus->nr);
-	} else
+	if (0 != bus->i2c_rc)
 		cx231xx_warn("%s: i2c bus %d register FAILED\n",
 			     dev->name, bus->nr);