@@ -1272,6 +1272,14 @@ int cx231xx_enable_i2c_port_3(struct cx231xx *dev, bool is_port_3)
if (dev->board.dont_use_port_3)
is_port_3 = false;
+
+ /*
+ * Should this code check dev->port_3_switch_enabled first
+ * to skip unnecessary reading of the register?
+ * If yes, the flag dev->port_3_switch_enabled must be initialized
+ * correctly.
+ */
+
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
PWR_CTL_EN, value, 4);
if (status < 0)
@@ -1294,6 +1302,10 @@ int cx231xx_enable_i2c_port_3(struct cx231xx *dev, bool is_port_3)
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
PWR_CTL_EN, value, 4);
+ /* remember status of the switch for usage in is_tuner */
+ if (status >= 0)
+ dev->port_3_switch_enabled = is_port_3;
+
return status;
}
@@ -629,6 +629,7 @@ struct cx231xx {
/* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
struct cx231xx_i2c i2c_bus[3];
unsigned int xc_fw_load_done:1;
+ unsigned int port_3_switch_enabled:1;
/* locks */
struct mutex gpio_i2c_lock;
struct mutex i2c_lock;
This is used later for is_tuner function that switches i2c behaviour for some tuners. V2: Add comments about possible improvements for port_3 switch function. V3: Fix coding style. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> --- drivers/media/usb/cx231xx/cx231xx-avcore.c | 12 ++++++++++++ drivers/media/usb/cx231xx/cx231xx.h | 1 + 2 files changed, 13 insertions(+)