diff mbox

cx231xx: use 1 byte read for i2c scan

Message ID 1414873161-23668-1-git-send-email-zzam@gentoo.org (mailing list archive)
State New, archived
Headers show

Commit Message

Matthias Schwarzott Nov. 1, 2014, 8:19 p.m. UTC 
Now cx231xx_i2c_check_for_device works like i2c_check_for_device of em28xx driver.

For me this fixes scanning of all ports but port 2.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
---
 drivers/media/usb/cx231xx/cx231xx-i2c.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index d1003c7..fe17a13 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -350,14 +350,15 @@  static int cx231xx_i2c_check_for_device(struct i2c_adapter *i2c_adap,
 	struct cx231xx *dev = bus->dev;
 	struct cx231xx_i2c_xfer_data req_data;
 	int status = 0;
+	u8 buf[1];
 
 	/* prepare xfer_data struct */
 	req_data.dev_addr = msg->addr;
-	req_data.direction = msg->flags;
+	req_data.direction = I2C_M_RD;
 	req_data.saddr_len = 0;
 	req_data.saddr_dat = 0;
-	req_data.buf_size = 0;
-	req_data.p_buffer = NULL;
+	req_data.buf_size = 1;
+	req_data.p_buffer = buf;
 
 	/* usb send command */
 	status = dev->cx231xx_send_usb_command(bus, &req_data);