@@ -46,9 +46,8 @@ static int rtl2830_wr(struct i2c_client *client, u8 reg, const u8 *val, int len)
};
if (1 + len > sizeof(buf)) {
- dev_warn(&dev->i2c->dev,
- "%s: i2c wr reg=%04x: len=%d is too big!\n",
- KBUILD_MODNAME, reg, len);
+ dev_warn(&client->dev, "i2c wr reg=%04x: len=%d is too big!\n",
+ reg, len);
return -EINVAL;
}
@@ -59,8 +58,8 @@ static int rtl2830_wr(struct i2c_client *client, u8 reg, const u8 *val, int len)
if (ret == 1) {
ret = 0;
} else {
- dev_warn(&dev->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \
- "len=%d\n", KBUILD_MODNAME, ret, reg, len);
+ dev_warn(&client->dev, "i2c wr failed=%d reg=%02x len=%d\n",
+ ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
@@ -89,8 +88,8 @@ static int rtl2830_rd(struct i2c_client *client, u8 reg, u8 *val, int len)
if (ret == 2) {
ret = 0;
} else {
- dev_warn(&dev->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \
- "len=%d\n", KBUILD_MODNAME, ret, reg, len);
+ dev_warn(&client->dev, "i2c rd failed=%d reg=%02x len=%d\n",
+ ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
@@ -259,7 +258,7 @@ static int rtl2830_init(struct dvb_frontend *fe)
return ret;
err:
- dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
@@ -314,9 +313,8 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
{0xae, 0xba, 0xf3, 0x26, 0x66, 0x64}, /* 8 MHz */
};
- dev_dbg(&dev->i2c->dev,
- "%s: frequency=%d bandwidth_hz=%d inversion=%d\n",
- __func__, c->frequency, c->bandwidth_hz, c->inversion);
+ dev_dbg(&client->dev, "frequency=%u bandwidth_hz=%u inversion=%u\n",
+ c->frequency, c->bandwidth_hz, c->inversion);
/* program tuner */
if (fe->ops.tuner_ops.set_params)
@@ -333,7 +331,8 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
i = 2;
break;
default:
- dev_dbg(&dev->i2c->dev, "%s: invalid bandwidth\n", __func__);
+ dev_err(&client->dev, "invalid bandwidth_hz %u\n",
+ c->bandwidth_hz);
return -EINVAL;
}
@@ -355,8 +354,8 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
num = div_u64(num, dev->cfg.xtal);
num = -num;
if_ctl = num & 0x3fffff;
- dev_dbg(&dev->i2c->dev, "%s: if_frequency=%d if_ctl=%08x\n",
- __func__, if_frequency, if_ctl);
+ dev_dbg(&client->dev, "if_frequency=%d if_ctl=%08x\n",
+ if_frequency, if_ctl);
ret = rtl2830_rd_reg_mask(client, 0x119, &tmp, 0xc0); /* b[7:6] */
if (ret)
@@ -387,7 +386,7 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
return ret;
err:
- dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
@@ -410,7 +409,7 @@ static int rtl2830_get_frontend(struct dvb_frontend *fe)
if (ret)
goto err;
- dev_dbg(&dev->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf);
+ dev_dbg(&client->dev, "TPS=%*ph\n", 3, buf);
switch ((buf[0] >> 2) & 3) {
case 0:
@@ -500,7 +499,7 @@ static int rtl2830_get_frontend(struct dvb_frontend *fe)
return 0;
err:
- dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
@@ -529,7 +528,7 @@ static int rtl2830_read_status(struct dvb_frontend *fe, fe_status_t *status)
return ret;
err:
- dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
@@ -579,7 +578,7 @@ static int rtl2830_read_snr(struct dvb_frontend *fe, u16 *snr)
return 0;
err:
- dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
@@ -601,7 +600,7 @@ static int rtl2830_read_ber(struct dvb_frontend *fe, u32 *ber)
return 0;
err:
- dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
@@ -638,7 +637,7 @@ static int rtl2830_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
return 0;
err:
- dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
@@ -728,7 +727,7 @@ static int rtl2830_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
return 0;
err:
- dev_dbg(&client->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
Pass correct device for dev_foo() logging in order to print logs correctly. Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/dvb-frontends/rtl2830.c | 43 +++++++++++++++++------------------ 1 file changed, 21 insertions(+), 22 deletions(-)