@@ -164,7 +164,7 @@ static int rtl2832_wr(struct rtl2832_dev *dev, u8 reg, u8 *val, int len)
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
- .addr = dev->cfg.i2c_addr,
+ .addr = client->addr,
.flags = 0,
.len = 1 + len,
.buf = buf,
@@ -198,12 +198,12 @@ static int rtl2832_rd(struct rtl2832_dev *dev, u8 reg, u8 *val, int len)
int ret;
struct i2c_msg msg[2] = {
{
- .addr = dev->cfg.i2c_addr,
+ .addr = client->addr,
.flags = 0,
.len = 1,
.buf = ®,
}, {
- .addr = dev->cfg.i2c_addr,
+ .addr = client->addr,
.flags = I2C_M_RD,
.len = len,
.buf = val,
@@ -399,9 +399,9 @@ static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq)
* / CrystalFreqHz)
*/
- pset_iffreq = if_freq % dev->cfg.xtal;
+ pset_iffreq = if_freq % dev->pdata->clk;
pset_iffreq *= 0x400000;
- pset_iffreq = div_u64(pset_iffreq, dev->cfg.xtal);
+ pset_iffreq = div_u64(pset_iffreq, dev->pdata->clk);
pset_iffreq = -pset_iffreq;
pset_iffreq = pset_iffreq & 0x3fffff;
dev_dbg(&client->dev, "if_frequency=%d pset_iffreq=%08x\n",
@@ -478,8 +478,9 @@ static int rtl2832_init(struct dvb_frontend *fe)
}
/* load tuner specific settings */
- dev_dbg(&client->dev, "load settings for tuner=%02x\n", dev->cfg.tuner);
- switch (dev->cfg.tuner) {
+ dev_dbg(&client->dev, "load settings for tuner=%02x\n",
+ dev->pdata->tuner);
+ switch (dev->pdata->tuner) {
case RTL2832_TUNER_FC0012:
case RTL2832_TUNER_FC0013:
len = ARRAY_SIZE(rtl2832_tuner_init_fc0012);
@@ -647,7 +648,7 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe)
* RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
* / ConstWithBandwidthMode)
*/
- num = dev->cfg.xtal * 7;
+ num = dev->pdata->clk * 7;
num *= 0x400000;
num = div_u64(num, bw_mode);
resamp_ratio = num & 0x3ffffff;
@@ -660,7 +661,7 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe)
* / (CrystalFreqHz * 7))
*/
num = bw_mode << 20;
- num2 = dev->cfg.xtal * 7;
+ num2 = dev->pdata->clk * 7;
num = div_u64(num, num2);
num = -num;
cfreq_off_ratio = num & 0xfffff;
@@ -907,12 +908,11 @@ static void rtl2832_i2c_gate_work(struct work_struct *work)
struct rtl2832_dev *dev = container_of(work,
struct rtl2832_dev, i2c_gate_work.work);
struct i2c_client *client = dev->client;
- struct i2c_adapter *adap = dev->i2c;
int ret;
u8 buf[2];
struct i2c_msg msg[1] = {
{
- .addr = dev->cfg.i2c_addr,
+ .addr = client->addr,
.flags = 0,
.len = sizeof(buf),
.buf = buf,
@@ -924,7 +924,7 @@ static void rtl2832_i2c_gate_work(struct work_struct *work)
/* select reg bank 1 */
buf[0] = 0x00;
buf[1] = 0x01;
- ret = __i2c_transfer(adap, msg, 1);
+ ret = __i2c_transfer(client->adapter, msg, 1);
if (ret != 1)
goto err;
@@ -933,7 +933,7 @@ static void rtl2832_i2c_gate_work(struct work_struct *work)
/* close I2C repeater gate */
buf[0] = 0x01;
buf[1] = 0x10;
- ret = __i2c_transfer(adap, msg, 1);
+ ret = __i2c_transfer(client->adapter, msg, 1);
if (ret != 1)
goto err;
@@ -953,7 +953,7 @@ static int rtl2832_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
u8 buf[2], val;
struct i2c_msg msg[1] = {
{
- .addr = dev->cfg.i2c_addr,
+ .addr = client->addr,
.flags = 0,
.len = sizeof(buf),
.buf = buf,
@@ -961,12 +961,12 @@ static int rtl2832_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
};
struct i2c_msg msg_rd[2] = {
{
- .addr = dev->cfg.i2c_addr,
+ .addr = client->addr,
.flags = 0,
.len = 1,
.buf = "\x01",
}, {
- .addr = dev->cfg.i2c_addr,
+ .addr = client->addr,
.flags = I2C_M_RD,
.len = 1,
.buf = &val,
@@ -982,14 +982,14 @@ static int rtl2832_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
/* select reg bank 1 */
buf[0] = 0x00;
buf[1] = 0x01;
- ret = __i2c_transfer(adap, msg, 1);
+ ret = __i2c_transfer(client->adapter, msg, 1);
if (ret != 1)
goto err;
dev->page = 1;
/* we must read that register, otherwise there will be errors */
- ret = __i2c_transfer(adap, msg_rd, 2);
+ ret = __i2c_transfer(client->adapter, msg_rd, 2);
if (ret != 2)
goto err;
@@ -1000,7 +1000,7 @@ static int rtl2832_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
else
buf[1] = 0x10; /* close */
- ret = __i2c_transfer(adap, msg, 1);
+ ret = __i2c_transfer(client->adapter, msg, 1);
if (ret != 1)
goto err;
@@ -1138,7 +1138,6 @@ static int rtl2832_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct rtl2832_platform_data *pdata = client->dev.platform_data;
- const struct rtl2832_config *config = pdata->config;
struct i2c_adapter *i2c = client->adapter;
struct rtl2832_dev *dev;
int ret;
@@ -1160,12 +1159,13 @@ static int rtl2832_probe(struct i2c_client *client,
/* setup the state */
dev->client = client;
- dev->i2c = i2c;
- dev->tuner = config->tuner;
+ dev->pdata = client->dev.platform_data;
+ if (pdata->config) {
+ dev->pdata->clk = pdata->config->xtal;
+ dev->pdata->tuner = pdata->config->tuner;
+ }
dev->sleeping = true;
- memcpy(&dev->cfg, config, sizeof(struct rtl2832_config));
INIT_DELAYED_WORK(&dev->i2c_gate_work, rtl2832_i2c_gate_work);
-
/* create muxed i2c adapter for demod itself */
dev->i2c_adapter = i2c_add_mux_adapter(i2c, &i2c->dev, dev, 0, 0, 0,
rtl2832_select, NULL);
@@ -53,6 +53,26 @@ struct rtl2832_platform_data {
const struct rtl2832_config *config;
/*
+ * Clock frequency.
+ * Hz
+ * 4000000, 16000000, 25000000, 28800000
+ */
+ u32 clk;
+
+ /*
+ * Tuner.
+ * XXX: This must be keep sync with dvb_usb_rtl28xxu USB IF driver.
+ */
+#define RTL2832_TUNER_TUA9001 0x24
+#define RTL2832_TUNER_FC0012 0x26
+#define RTL2832_TUNER_E4000 0x27
+#define RTL2832_TUNER_FC0013 0x29
+#define RTL2832_TUNER_R820T 0x2a
+#define RTL2832_TUNER_R828D 0x2b
+ u8 tuner;
+
+ /*
+ * Callbacks.
*/
struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
@@ -26,17 +26,15 @@
#include <linux/i2c-mux.h>
struct rtl2832_dev {
+ struct rtl2832_platform_data *pdata;
struct i2c_client *client;
- struct i2c_adapter *i2c;
struct i2c_adapter *i2c_adapter;
struct i2c_adapter *i2c_adapter_tuner;
struct dvb_frontend fe;
- struct rtl2832_config cfg;
bool i2c_gate_state;
bool sleeping;
- u8 tuner;
u8 page; /* active register page */
struct delayed_work i2c_gate_work;
};
Move all needed configuration values to platform data structure and remove old configuration code where possible. Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/dvb-frontends/rtl2832.c | 48 +++++++++++++++--------------- drivers/media/dvb-frontends/rtl2832.h | 20 +++++++++++++ drivers/media/dvb-frontends/rtl2832_priv.h | 4 +-- 3 files changed, 45 insertions(+), 27 deletions(-)