diff mbox

[RFC] media: radio: handle timeouts

Message ID 1423126602-6639-1-git-send-email-hofrat@osadl.org (mailing list archive)
State New, archived
Headers show

Commit Message

Nicholas Mc Guire Feb. 5, 2015, 8:56 a.m. UTC
Add handling for timeout case.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---
Some error state/error information seems be get lost int the current code.
(line-numbers are from 3.19.0-rc7.

Assume that on line 827 core->write succeeds but the following 
wait_for_completion_timeout times out and the radio->irq_received condition 
is not satisfied resulting in   goto out;

827       r = core->write(core, WL1273_TUNER_MODE_SET, TUNER_MODE_AUTO_SEEK);
828       if (r)
829               goto out;
830
831       wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
832       if (!(radio->irq_received & WL1273_BL_EVENT))
833               goto out;


A similar situation is at line 955 - 859 where a tiemout could occure
and the reported value would be the success value from core->write.

852       reinit_completion(&radio->busy);
853       dev_dbg(radio->dev, "%s: BUSY\n", __func__);
854
855       r = core->write(core, WL1273_TUNER_MODE_SET, TUNER_MODE_AUTO_SEEK);
856       if (r)
857               goto out;
858
859       wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000)

the problem is that the value of r now is the "success" value from core->write
and any timeout and/or failure to detect the expected interrupt is not 
reported in 

860 out:
861       dev_dbg(radio->dev, "%s: Err: %d\n", __func__, r);
862       return r;

Should the wait_for_completion_timeout not report the timeout event by setting 
r to -ETIMEOUT ? respectively use if (!(radio->irq_received & WL1273_BL_EVENT))
to check and set -ETIMEOUT there ?

Comparing this with wl1273_fm_set_tx_freq - the below patch might be suitable 
way to handle timeout - but this needs a review by someone who knows the 
details of the driver - so this is really just a guess.

Patch was only compile tested with x86_64_defconfig + CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y, CONFIG_V4L_PLATFORM_DRIVERS=y,
CONFIG_MEDIA_RADIO_SUPPORT=y, RADIO_ADAPTER=y, CONFIG_RADIO_WL1273=m

Patch is against 3.19.0-rc7 (localversion-next is -next-20150204)

 drivers/media/radio/radio-wl1273.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Comments

Hans Verkuil Feb. 16, 2015, 11:19 a.m. UTC | #1
Hi Nicholas,

On 02/05/2015 09:56 AM, Nicholas Mc Guire wrote:
> Add handling for timeout case.
> 
> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
> ---
> Some error state/error information seems be get lost int the current code.
> (line-numbers are from 3.19.0-rc7.
> 
> Assume that on line 827 core->write succeeds but the following 
> wait_for_completion_timeout times out and the radio->irq_received condition 
> is not satisfied resulting in   goto out;
> 
> 827       r = core->write(core, WL1273_TUNER_MODE_SET, TUNER_MODE_AUTO_SEEK);
> 828       if (r)
> 829               goto out;
> 830
> 831       wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
> 832       if (!(radio->irq_received & WL1273_BL_EVENT))
> 833               goto out;
> 
> 
> A similar situation is at line 955 - 859 where a tiemout could occure
> and the reported value would be the success value from core->write.
> 
> 852       reinit_completion(&radio->busy);
> 853       dev_dbg(radio->dev, "%s: BUSY\n", __func__);
> 854
> 855       r = core->write(core, WL1273_TUNER_MODE_SET, TUNER_MODE_AUTO_SEEK);
> 856       if (r)
> 857               goto out;
> 858
> 859       wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000)
> 
> the problem is that the value of r now is the "success" value from core->write
> and any timeout and/or failure to detect the expected interrupt is not 
> reported in 
> 
> 860 out:
> 861       dev_dbg(radio->dev, "%s: Err: %d\n", __func__, r);
> 862       return r;
> 
> Should the wait_for_completion_timeout not report the timeout event by setting 
> r to -ETIMEOUT ? respectively use if (!(radio->irq_received & WL1273_BL_EVENT))
> to check and set -ETIMEOUT there ?
> 
> Comparing this with wl1273_fm_set_tx_freq - the below patch might be suitable 
> way to handle timeout - but this needs a review by someone who knows the 
> details of the driver - so this is really just a guess.

While I am certainly not an expert, I agree that the current situation is bad.

I'm taking your patch as-is, since returning a proper error here seems to make
much more sense.

Regards,

	Hans

> 
> Patch was only compile tested with x86_64_defconfig + CONFIG_MEDIA_SUPPORT=m
> CONFIG_MEDIA_CAMERA_SUPPORT=y, CONFIG_V4L_PLATFORM_DRIVERS=y,
> CONFIG_MEDIA_RADIO_SUPPORT=y, RADIO_ADAPTER=y, CONFIG_RADIO_WL1273=m
> 
> Patch is against 3.19.0-rc7 (localversion-next is -next-20150204)
> 
>  drivers/media/radio/radio-wl1273.c |    9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
> index 571c7f6..6830523 100644
> --- a/drivers/media/radio/radio-wl1273.c
> +++ b/drivers/media/radio/radio-wl1273.c
> @@ -828,9 +828,12 @@ static int wl1273_fm_set_seek(struct wl1273_device *radio,
>  	if (r)
>  		goto out;
>  
> +	/* wait for the FR IRQ */
>  	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
> -	if (!(radio->irq_received & WL1273_BL_EVENT))
> +	if (!(radio->irq_received & WL1273_BL_EVENT)) {
> +		r = -ETIMEDOUT;
>  		goto out;
> +	}
>  
>  	radio->irq_received &= ~WL1273_BL_EVENT;
>  
> @@ -856,7 +859,9 @@ static int wl1273_fm_set_seek(struct wl1273_device *radio,
>  	if (r)
>  		goto out;
>  
> -	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
> +	/* wait for the FR IRQ */
> +	if (!wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000)))
> +		r = -ETIMEDOUT;
>  out:
>  	dev_dbg(radio->dev, "%s: Err: %d\n", __func__, r);
>  	return r;
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 571c7f6..6830523 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -828,9 +828,12 @@  static int wl1273_fm_set_seek(struct wl1273_device *radio,
 	if (r)
 		goto out;
 
+	/* wait for the FR IRQ */
 	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
-	if (!(radio->irq_received & WL1273_BL_EVENT))
+	if (!(radio->irq_received & WL1273_BL_EVENT)) {
+		r = -ETIMEDOUT;
 		goto out;
+	}
 
 	radio->irq_received &= ~WL1273_BL_EVENT;
 
@@ -856,7 +859,9 @@  static int wl1273_fm_set_seek(struct wl1273_device *radio,
 	if (r)
 		goto out;
 
-	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
+	/* wait for the FR IRQ */
+	if (!wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000)))
+		r = -ETIMEDOUT;
 out:
 	dev_dbg(radio->dev, "%s: Err: %d\n", __func__, r);
 	return r;