Message ID | 1426862897-26789-1-git-send-email-prladdha@cisco.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Prashant, On 03/20/2015 03:48 PM, Prashant Laddha wrote: > In addition to v4l2_find_dv_timings_cap(), where timings are searched > against the list of preset timings, the incoming timing from v4l2-ctl > is checked against CVT and GTF standards. If it confirms to be CVT or > GTF, it is treated as valid timing and vivid format is updated with > new timings. > > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Signed-off-by: Prashant Laddha <prladdha@cisco.com> > --- > drivers/media/platform/vivid/vivid-vid-cap.c | 61 +++++++++++++++++++++++++++- > 1 file changed, 60 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c > index 867a29a..b4ec9b0 100644 > --- a/drivers/media/platform/vivid/vivid-vid-cap.c > +++ b/drivers/media/platform/vivid/vivid-vid-cap.c > @@ -1552,6 +1552,63 @@ int vivid_vid_cap_s_std(struct file *file, void *priv, v4l2_std_id id) > return 0; > } > > +static void find_aspect_ratio(u32 width, u32 height, > + u32 *num, u32 *denom) > +{ > + if (!(height % 3) && ((height * 4 / 3) == width)) { > + *num = 4; > + *denom = 3; > + } else if (!(height % 9) && ((height * 16 / 9) == width)) { > + *num = 16; > + *denom = 9; > + } else if (!(height % 10) && ((height * 16 / 10) == width)) { > + *num = 16; > + *denom = 10; > + } else if (!(height % 4) && ((height * 5 / 4) == width)) { > + *num = 5; > + *denom = 4; > + } else if (!(height % 9) && ((height * 15 / 9) == width)) { > + *num = 15; > + *denom = 9; > + } else { /* default to 16:9 */ > + *num = 16; > + *denom = 9; > + } > +} > + > +static bool valid_cvt_gtf_timings(struct v4l2_dv_timings *timings) > +{ > + struct v4l2_bt_timings *bt = &timings->bt; > + u32 total_h_pixel; > + u32 total_v_lines; > + u32 h_freq; > + > + if (!v4l2_valid_dv_timings(timings, &vivid_dv_timings_cap, > + NULL, NULL)) > + return false; > + > + total_h_pixel = V4L2_DV_BT_FRAME_WIDTH(bt); > + total_v_lines = V4L2_DV_BT_FRAME_HEIGHT(bt); > + > + h_freq = (u32)bt->pixelclock / total_h_pixel; > + > + if (bt->standards == V4L2_DV_BT_STD_CVT) This test and the next isn't right. Apologies that I didn't see that when I reviewed v1. The correct test is: if (bt->standard == 0 || (bt->standards & V4L2_DV_BT_STD_CVT)) > + return v4l2_detect_cvt(total_v_lines, h_freq, bt->vsync, > + bt->polarities, timings); Just returning here isn't right either: if a CVT format is detected, then it can return true, otherwise it should continue and try the GTF format. > + > + if (bt->standards == V4L2_DV_BT_STD_GTF) { And this becomes: if (bt->standard == 0 || (bt->standards & V4L2_DV_BT_STD_GTF)) When it comes to autodetecting formats the driver can often detect only a few timing properties, and it is rarely able to say if it will be a CVT or GTF timing. So often they leave bt->standard to 0. Regards, Hans > + struct v4l2_fract aspect_ratio; > + > + find_aspect_ratio(bt->width, bt->height, > + &aspect_ratio.numerator, > + &aspect_ratio.denominator); > + return v4l2_detect_gtf(total_v_lines, h_freq, bt->vsync, > + bt->polarities, aspect_ratio, timings); > + } > + > + return false; > +} > + > int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh, > struct v4l2_dv_timings *timings) > { > @@ -1561,8 +1618,10 @@ int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh, > return -ENODATA; > if (vb2_is_busy(&dev->vb_vid_cap_q)) > return -EBUSY; > + > if (!v4l2_find_dv_timings_cap(timings, &vivid_dv_timings_cap, > - 0, NULL, NULL)) > + 0, NULL, NULL) > + && !valid_cvt_gtf_timings(timings)) > return -EINVAL; > if (v4l2_match_dv_timings(timings, &dev->dv_timings_cap, 0)) > return 0; > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 20/03/15 9:39 pm, "Hans Verkuil" <hverkuil@xs4all.nl> wrote: >Hi Prashant, > >> + >> + h_freq = (u32)bt->pixelclock / total_h_pixel; >> + >> + if (bt->standards == V4L2_DV_BT_STD_CVT) > >This test and the next isn't right. Apologies that I didn't see that >when I reviewed v1. > >The correct test is: > > if (bt->standard == 0 || (bt->standards & V4L2_DV_BT_STD_CVT)) > > >> + return v4l2_detect_cvt(total_v_lines, h_freq, bt->vsync, >> + bt->polarities, timings); > >Just returning here isn't right either: if a CVT format is detected, then >it can return true, otherwise it should continue and try the GTF format. > >> + >> + if (bt->standards == V4L2_DV_BT_STD_GTF) { > >And this becomes: > > If (bt->standard == 0 || (bt->standards & V4L2_DV_BT_STD_GTF)) > >When it comes to autodetecting formats the driver can often detect >only a few timing properties, and it is rarely able to say if it >will be a CVT or GTF timing. So often they leave bt->standard to 0. > Thanks Hans. I will fix it and post v3. Regards, Prashant > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c index 867a29a..b4ec9b0 100644 --- a/drivers/media/platform/vivid/vivid-vid-cap.c +++ b/drivers/media/platform/vivid/vivid-vid-cap.c @@ -1552,6 +1552,63 @@ int vivid_vid_cap_s_std(struct file *file, void *priv, v4l2_std_id id) return 0; } +static void find_aspect_ratio(u32 width, u32 height, + u32 *num, u32 *denom) +{ + if (!(height % 3) && ((height * 4 / 3) == width)) { + *num = 4; + *denom = 3; + } else if (!(height % 9) && ((height * 16 / 9) == width)) { + *num = 16; + *denom = 9; + } else if (!(height % 10) && ((height * 16 / 10) == width)) { + *num = 16; + *denom = 10; + } else if (!(height % 4) && ((height * 5 / 4) == width)) { + *num = 5; + *denom = 4; + } else if (!(height % 9) && ((height * 15 / 9) == width)) { + *num = 15; + *denom = 9; + } else { /* default to 16:9 */ + *num = 16; + *denom = 9; + } +} + +static bool valid_cvt_gtf_timings(struct v4l2_dv_timings *timings) +{ + struct v4l2_bt_timings *bt = &timings->bt; + u32 total_h_pixel; + u32 total_v_lines; + u32 h_freq; + + if (!v4l2_valid_dv_timings(timings, &vivid_dv_timings_cap, + NULL, NULL)) + return false; + + total_h_pixel = V4L2_DV_BT_FRAME_WIDTH(bt); + total_v_lines = V4L2_DV_BT_FRAME_HEIGHT(bt); + + h_freq = (u32)bt->pixelclock / total_h_pixel; + + if (bt->standards == V4L2_DV_BT_STD_CVT) + return v4l2_detect_cvt(total_v_lines, h_freq, bt->vsync, + bt->polarities, timings); + + if (bt->standards == V4L2_DV_BT_STD_GTF) { + struct v4l2_fract aspect_ratio; + + find_aspect_ratio(bt->width, bt->height, + &aspect_ratio.numerator, + &aspect_ratio.denominator); + return v4l2_detect_gtf(total_v_lines, h_freq, bt->vsync, + bt->polarities, aspect_ratio, timings); + } + + return false; +} + int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings) { @@ -1561,8 +1618,10 @@ int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh, return -ENODATA; if (vb2_is_busy(&dev->vb_vid_cap_q)) return -EBUSY; + if (!v4l2_find_dv_timings_cap(timings, &vivid_dv_timings_cap, - 0, NULL, NULL)) + 0, NULL, NULL) + && !valid_cvt_gtf_timings(timings)) return -EINVAL; if (v4l2_match_dv_timings(timings, &dev->dv_timings_cap, 0)) return 0;
In addition to v4l2_find_dv_timings_cap(), where timings are searched against the list of preset timings, the incoming timing from v4l2-ctl is checked against CVT and GTF standards. If it confirms to be CVT or GTF, it is treated as valid timing and vivid format is updated with new timings. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Prashant Laddha <prladdha@cisco.com> --- drivers/media/platform/vivid/vivid-vid-cap.c | 61 +++++++++++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-)