| Message ID | 1426863811-12516-10-git-send-email-j.anaszewski@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Jacek, On Fri, Mar 20, 2015 at 04:03:29PM +0100, Jacek Anaszewski wrote: > This patch adds a description of 'flashes' property > to the samsung-fimc.txt. > > Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> > Acked-by: Kyungmin Park <kyungmin.park@samsung.com> > Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > .../devicetree/bindings/media/samsung-fimc.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt > index 922d6f8..cb0e263 100644 > --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt > +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt > @@ -40,6 +40,13 @@ should be inactive. For the "active-a" state the camera port A must be activated > and the port B deactivated and for the state "active-b" it should be the other > way around. > > +Optional properties: > + > +- flashes - Array of phandles to the flash LEDs that can be controlled by the > + sub-devices contained in this media device. Flash LED is > + represented by a child node of a flash LED device This should be in Documentation/devicetree/bindings/media/video-interfaces.txt. Should flash devices be associated with sensors somehow rather than ISPs? That's how they commonly are arranged, however that doesn't limit placing them in silly places. I'm not necessarily saying the flashes-property should be present in sensor's DT nodes, but it'd be good to be able to make the association if it's there. > + (see Documentation/devicetree/bindings/leds/common.txt). > + > The 'camera' node must include at least one 'fimc' child node. > > > @@ -166,6 +173,7 @@ Example: > clock-output-names = "cam_a_clkout", "cam_b_clkout"; > pinctrl-names = "default"; > pinctrl-0 = <&cam_port_a_clk_active>; > + flashes = <&camera_flash>, <&system_torch>; > status = "okay"; > #address-cells = <1>; > #size-cells = <1>; There will be other kind of devices that have somewhat similar relationship. They just haven't been defined yet. Lens controllers or EEPROM for instance. The two are an integral part of a module, something which is not modelled in DT in any way, but perhaps should be.
Hi Sakari, On 03/25/2015 02:06 AM, Sakari Ailus wrote: > Hi Jacek, > > On Fri, Mar 20, 2015 at 04:03:29PM +0100, Jacek Anaszewski wrote: >> This patch adds a description of 'flashes' property >> to the samsung-fimc.txt. >> >> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> >> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> >> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> >> --- >> .../devicetree/bindings/media/samsung-fimc.txt | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt >> index 922d6f8..cb0e263 100644 >> --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt >> +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt >> @@ -40,6 +40,13 @@ should be inactive. For the "active-a" state the camera port A must be activated >> and the port B deactivated and for the state "active-b" it should be the other >> way around. >> >> +Optional properties: >> + >> +- flashes - Array of phandles to the flash LEDs that can be controlled by the >> + sub-devices contained in this media device. Flash LED is >> + represented by a child node of a flash LED device > > This should be in > Documentation/devicetree/bindings/media/video-interfaces.txt. > > Should flash devices be associated with sensors somehow rather than ISPs? > That's how they commonly are arranged, however that doesn't limit placing > them in silly places. > > I'm not necessarily saying the flashes-property should be present in > sensor's DT nodes, but it'd be good to be able to make the association if > it's there. I know of a SoC, which drives the flash from its on-chip ISP. The GPIO connected to the flash controller's external strobe pin can be configured so that the signal is routed to it from the ISP or from CPU (for software strobe mode). I think that Sylwester could say more in this subject. >> + (see Documentation/devicetree/bindings/leds/common.txt). >> + >> The 'camera' node must include at least one 'fimc' child node. >> >> >> @@ -166,6 +173,7 @@ Example: >> clock-output-names = "cam_a_clkout", "cam_b_clkout"; >> pinctrl-names = "default"; >> pinctrl-0 = <&cam_port_a_clk_active>; >> + flashes = <&camera_flash>, <&system_torch>; >> status = "okay"; >> #address-cells = <1>; >> #size-cells = <1>; > > There will be other kind of devices that have somewhat similar relationship. > They just haven't been defined yet. Lens controllers or EEPROM for instance. > The two are an integral part of a module, something which is not modelled in > DT in any way, but perhaps should be. Do you suggest using more generic name than 'flashes'?
Hello, On 25/03/15 09:52, Jacek Anaszewski wrote: > On 03/25/2015 02:06 AM, Sakari Ailus wrote: >> On Fri, Mar 20, 2015 at 04:03:29PM +0100, Jacek Anaszewski wrote: >>> This patch adds a description of 'flashes' property >>> to the samsung-fimc.txt. >>> >>> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> >>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> >>> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> >>> --- >>> .../devicetree/bindings/media/samsung-fimc.txt | 8 ++++++++ >>> 1 file changed, 8 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt >>> index 922d6f8..cb0e263 100644 >>> --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt >>> +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt >>> @@ -40,6 +40,13 @@ should be inactive. For the "active-a" state the camera port A must be activated >>> and the port B deactivated and for the state "active-b" it should be the other >>> way around. >>> >>> +Optional properties: >>> + >>> +- flashes - Array of phandles to the flash LEDs that can be controlled by the >>> + sub-devices contained in this media device. Flash LED is >>> + represented by a child node of a flash LED device >> >> This should be in >> Documentation/devicetree/bindings/media/video-interfaces.txt. >> >> Should flash devices be associated with sensors somehow rather than ISPs? >> That's how they commonly are arranged, however that doesn't limit placing >> them in silly places. >> >> I'm not necessarily saying the flashes-property should be present in >> sensor's DT nodes, but it'd be good to be able to make the association if >> it's there. IMHO 'flashes' is a misleading name, these are simply high brightness LEDs which can work as camera flash or auxiliary light for camcording, in context of a camera device. The led DT nodes which the entries of above flashes property is pointing to have a text label, which presumably could be used to associate a LED device with an image sensor. That said, I think we should allow a property as above 'flashes' be placed in aggregate camera node and also in sensor device node. I think it should be left to the bridge/ISP binding to choose one option or the other. For now I would propose to rename the "flashes" property to "samsung,leds" or "leds" and leave it in "camera" node. > I know of a SoC, which drives the flash from its on-chip ISP. The GPIO > connected to the flash controller's external strobe pin can be > configured so that the signal is routed to it from the ISP or from > CPU (for software strobe mode). > > I think that Sylwester could say more in this subject. > > >>> + (see Documentation/devicetree/bindings/leds/common.txt). >>> + >>> The 'camera' node must include at least one 'fimc' child node. >>> >>> >>> @@ -166,6 +173,7 @@ Example: >>> clock-output-names = "cam_a_clkout", "cam_b_clkout"; >>> pinctrl-names = "default"; >>> pinctrl-0 = <&cam_port_a_clk_active>; >>> + flashes = <&camera_flash>, <&system_torch>; >>> status = "okay"; >>> #address-cells = <1>; >>> #size-cells = <1>; >> >> There will be other kind of devices that have somewhat similar relationship. >> They just haven't been defined yet. Lens controllers or EEPROM for instance. >> The two are an integral part of a module, something which is not modelled in >> DT in any way, but perhaps should be. Indeed, I'd say it belongs to a particular image sensor (camera module) binding to describe each its physical subdevices, i.e. if a pointer to lens or EEPROM is needed in the main module DT node. > Do you suggest using more generic name than 'flashes'?
Hi Jacek, On Wed, Mar 25, 2015 at 09:52:02AM +0100, Jacek Anaszewski wrote: > Hi Sakari, > > On 03/25/2015 02:06 AM, Sakari Ailus wrote: > >Hi Jacek, > > > >On Fri, Mar 20, 2015 at 04:03:29PM +0100, Jacek Anaszewski wrote: > >>This patch adds a description of 'flashes' property > >>to the samsung-fimc.txt. > >> > >>Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> > >>Acked-by: Kyungmin Park <kyungmin.park@samsung.com> > >>Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> > >>--- > >> .../devicetree/bindings/media/samsung-fimc.txt | 8 ++++++++ > >> 1 file changed, 8 insertions(+) > >> > >>diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt > >>index 922d6f8..cb0e263 100644 > >>--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt > >>+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt > >>@@ -40,6 +40,13 @@ should be inactive. For the "active-a" state the camera port A must be activated > >> and the port B deactivated and for the state "active-b" it should be the other > >> way around. > >> > >>+Optional properties: > >>+ > >>+- flashes - Array of phandles to the flash LEDs that can be controlled by the > >>+ sub-devices contained in this media device. Flash LED is > >>+ represented by a child node of a flash LED device > > > >This should be in > >Documentation/devicetree/bindings/media/video-interfaces.txt. > > > >Should flash devices be associated with sensors somehow rather than ISPs? > >That's how they commonly are arranged, however that doesn't limit placing > >them in silly places. > > > >I'm not necessarily saying the flashes-property should be present in > >sensor's DT nodes, but it'd be good to be able to make the association if > >it's there. > > I know of a SoC, which drives the flash from its on-chip ISP. The GPIO > connected to the flash controller's external strobe pin can be > configured so that the signal is routed to it from the ISP or from > CPU (for software strobe mode). > > I think that Sylwester could say more in this subject. Yeah, some ISPs can also generate strobe signals. Otherwise this would be the job of the sensor, sadly many module vendors ignore the sensor strobe signal routing even when it's available. The sensor is by far in the best position to trigger the flash since it has the best readout timing information. Currently we have no way to express this, I think what's first needed is the data in the DT. Probably the flash driver and the driver that provides the strobe signal should both be aware of this. User space interface wise the strobe source control could be used --- we'd just need new menu entries. > > > >>+ (see Documentation/devicetree/bindings/leds/common.txt). > >>+ > >> The 'camera' node must include at least one 'fimc' child node. > >> > >> > >>@@ -166,6 +173,7 @@ Example: > >> clock-output-names = "cam_a_clkout", "cam_b_clkout"; > >> pinctrl-names = "default"; > >> pinctrl-0 = <&cam_port_a_clk_active>; > >>+ flashes = <&camera_flash>, <&system_torch>; > >> status = "okay"; > >> #address-cells = <1>; > >> #size-cells = <1>; > > > >There will be other kind of devices that have somewhat similar relationship. > >They just haven't been defined yet. Lens controllers or EEPROM for instance. > >The two are an integral part of a module, something which is not modelled in > >DT in any way, but perhaps should be. > > Do you suggest using more generic name than 'flashes'? So far I don't have a better suggestion for the name of the property. However, it'd be good to be able to associate the flash to a sensor. I wonder how wrong would it be to put the flashes property to the port node...
Hi Sakari and Sylwester, On 04/03/2015 12:53 PM, Sylwester Nawrocki wrote: > Hello, > > On 25/03/15 09:52, Jacek Anaszewski wrote: >> On 03/25/2015 02:06 AM, Sakari Ailus wrote: >>> On Fri, Mar 20, 2015 at 04:03:29PM +0100, Jacek Anaszewski wrote: >>>> This patch adds a description of 'flashes' property >>>> to the samsung-fimc.txt. >>>> >>>> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> >>>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> >>>> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> >>>> --- >>>> .../devicetree/bindings/media/samsung-fimc.txt | 8 ++++++++ >>>> 1 file changed, 8 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt >>>> index 922d6f8..cb0e263 100644 >>>> --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt >>>> +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt >>>> @@ -40,6 +40,13 @@ should be inactive. For the "active-a" state the camera port A must be activated >>>> and the port B deactivated and for the state "active-b" it should be the other >>>> way around. >>>> >>>> +Optional properties: >>>> + >>>> +- flashes - Array of phandles to the flash LEDs that can be controlled by the >>>> + sub-devices contained in this media device. Flash LED is >>>> + represented by a child node of a flash LED device >>> >>> This should be in >>> Documentation/devicetree/bindings/media/video-interfaces.txt. This file documents DT nodes starting from the level one below the camera node aggregating all the devices belonging to the media device (I am referring to the 'camera' node from the file arch/arm/boot/dts/exynos4412-trats2.dts). Should 'leds' property be put there, the aggregating node would have to be described there at first. I am wondering whether video-interfaces is a suitable place for documenting illuminators, though. >>> Should flash devices be associated with sensors somehow rather than ISPs? >>> That's how they commonly are arranged, however that doesn't limit placing >>> them in silly places. >>> >>> I'm not necessarily saying the flashes-property should be present in >>> sensor's DT nodes, but it'd be good to be able to make the association if >>> it's there. > > IMHO 'flashes' is a misleading name, these are simply high brightness LEDs > which can work as camera flash or auxiliary light for camcording, in context of > a camera device. > > The led DT nodes which the entries of above flashes property is pointing to > have a text label, which presumably could be used to associate a LED device > with an image sensor. That said, I think we should allow a property as above > 'flashes' be placed in aggregate camera node and also in sensor device node. > I think it should be left to the bridge/ISP binding to choose one option or > the other. I agree. > For now I would propose to rename the "flashes" property to "samsung,leds" or > "leds" and leave it in "camera" node. How about flash-leds? >> I know of a SoC, which drives the flash from its on-chip ISP. The GPIO >> connected to the flash controller's external strobe pin can be >> configured so that the signal is routed to it from the ISP or from >> CPU (for software strobe mode). >> >> I think that Sylwester could say more in this subject. >> >> >>>> + (see Documentation/devicetree/bindings/leds/common.txt). >>>> + >>>> The 'camera' node must include at least one 'fimc' child node. >>>> >>>> >>>> @@ -166,6 +173,7 @@ Example: >>>> clock-output-names = "cam_a_clkout", "cam_b_clkout"; >>>> pinctrl-names = "default"; >>>> pinctrl-0 = <&cam_port_a_clk_active>; >>>> + flashes = <&camera_flash>, <&system_torch>; >>>> status = "okay"; >>>> #address-cells = <1>; >>>> #size-cells = <1>; >>> >>> There will be other kind of devices that have somewhat similar relationship. >>> They just haven't been defined yet. Lens controllers or EEPROM for instance. >>> The two are an integral part of a module, something which is not modelled in >>> DT in any way, but perhaps should be. > > Indeed, I'd say it belongs to a particular image sensor (camera module) binding > to describe each its physical subdevices, i.e. if a pointer to lens or EEPROM > is needed in the main module DT node. > >> Do you suggest using more generic name than 'flashes'? > >
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 922d6f8..cb0e263 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -40,6 +40,13 @@ should be inactive. For the "active-a" state the camera port A must be activated and the port B deactivated and for the state "active-b" it should be the other way around. +Optional properties: + +- flashes - Array of phandles to the flash LEDs that can be controlled by the + sub-devices contained in this media device. Flash LED is + represented by a child node of a flash LED device + (see Documentation/devicetree/bindings/leds/common.txt). + The 'camera' node must include at least one 'fimc' child node. @@ -166,6 +173,7 @@ Example: clock-output-names = "cam_a_clkout", "cam_b_clkout"; pinctrl-names = "default"; pinctrl-0 = <&cam_port_a_clk_active>; + flashes = <&camera_flash>, <&system_torch>; status = "okay"; #address-cells = <1>; #size-cells = <1>;