Message ID | 1434447031-21434-3-git-send-email-prladdha@cisco.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 06/16/2015 11:30 AM, Prashant Laddha wrote: > To support the timings calculations for reduced blanking version 2 > (RB v2), extended the command line options to include flag indicating > whether to use RB V2 or not. Updated the command usage for the same. > > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Signed-off-by: Prashant Laddha <prladdha@cisco.com> > --- > utils/v4l2-ctl/v4l2-ctl-stds.cpp | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/utils/v4l2-ctl/v4l2-ctl-stds.cpp b/utils/v4l2-ctl/v4l2-ctl-stds.cpp > index c0e919b..9734c80 100644 > --- a/utils/v4l2-ctl/v4l2-ctl-stds.cpp > +++ b/utils/v4l2-ctl/v4l2-ctl-stds.cpp > @@ -41,7 +41,10 @@ void stds_usage(void) > " index=<index>: use the index as provided by --list-dv-timings\n" > " or specify timings using cvt/gtf options as follows:\n" > " cvt/gtf,width=<width>,height=<height>,fps=<frames per sec>\n" > - " interlaced=<0/1>,reduced-blanking=<0/1>\n" > + " interlaced=<0/1>,reduced-blanking=<0/1>,use-rb-v2=<0/1>\n" > + " use-rb-v2 indicates whether to use reduced blanking version 2\n" > + " or not. This flag is relevant only for cvt timings and has\n" > + " effect only if reduced-blanking=1\n" Why not just allow a value of 2 for the reduced-blanking argument instead of introducing a new argument? For gtf 1 and 2 mean the same thing, for cvt 1 will use the standard RB and 2 RBv2. Seems simpler to me. It also means that calc_cvt_modeline doesn't need a new argument, just that bool reduced_blanking becomes int reduced_blanking. Other than this it looks good to me. Regards, Hans > " or give a fully specified timings:\n" > " width=<width>,height=<height>,interlaced=<0/1>,\n" > " polarities=<polarities mask>,pixelclock=<pixelclock Hz>,\n" > @@ -148,6 +151,7 @@ enum timing_opts { > GTF, > FPS, > REDUCED_BLANK, > + USE_RB_V2, > }; > > static int parse_timing_subopt(char **subopt_str, int *value) > @@ -175,6 +179,7 @@ static int parse_timing_subopt(char **subopt_str, int *value) > "gtf", > "fps", > "reduced-blanking", > + "use-rb-v2", > NULL > }; > > @@ -205,6 +210,7 @@ static void get_cvt_gtf_timings(char *subopt, int standard, > int fps = 0; > int r_blank = 0; > int interlaced = 0; > + int use_rb_v2 = 0; > > bool timings_valid = false; > > @@ -231,6 +237,8 @@ static void get_cvt_gtf_timings(char *subopt, int standard, > case INTERLACED: > interlaced = opt_val; > break; > + case USE_RB_V2: > + use_rb_v2 = opt_val; > default: > break; > } > @@ -240,7 +248,8 @@ static void get_cvt_gtf_timings(char *subopt, int standard, > timings_valid = calc_cvt_modeline(width, height, fps, > r_blank == 1 ? true : false, > interlaced == 1 ? true : false, > - false, bt); > + use_rb_v2 == 1 ? true : false, > + bt); > } else { > timings_valid = calc_gtf_modeline(width, height, fps, > r_blank == 1 ? true : false, > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks for your comments Hans. On 19/06/15 11:37 am, "Hans Verkuil" <hverkuil@xs4all.nl> wrote: >> utils/v4l2-ctl/v4l2-ctl-stds.cpp | 13 +++++++++++-- >> 1 file changed, 11 insertions(+), 2 deletions(-) >> >> diff --git a/utils/v4l2-ctl/v4l2-ctl-stds.cpp >>b/utils/v4l2-ctl/v4l2-ctl-stds.cpp >> index c0e919b..9734c80 100644 >> --- a/utils/v4l2-ctl/v4l2-ctl-stds.cpp >> +++ b/utils/v4l2-ctl/v4l2-ctl-stds.cpp >> @@ -41,7 +41,10 @@ void stds_usage(void) >> " index=<index>: use the index as provided >>by --list-dv-timings\n" >> " or specify timings using cvt/gtf options >>as follows:\n" >> " >>cvt/gtf,width=<width>,height=<height>,fps=<frames per sec>\n" >> - " >>interlaced=<0/1>,reduced-blanking=<0/1>\n" >> + " >>interlaced=<0/1>,reduced-blanking=<0/1>,use-rb-v2=<0/1>\n" >> + " use-rb-v2 indicates whether to use >>reduced blanking version 2\n" >> + " or not. This flag is relevant only for >>cvt timings and has\n" >> + " effect only if reduced-blanking=1\n" > >Why not just allow a value of 2 for the reduced-blanking argument instead >of introducing a new argument? For gtf 1 and 2 mean the same thing, for >cvt 1 >will use the standard RB and 2 RBv2. The only reason for which I added another flag is to make control parameters same as cvt spreadsheet. But, yes, we could accept reduced-blanking = 2. I will post version 2 with this change. > >Seems simpler to me. It also means that calc_cvt_modeline doesn't need a >new >argument, just that bool reduced_blanking becomes int reduced_blanking. > >Other than this it looks good to me. > >Regards, > > Hans > >> " or give a fully specified timings:\n" >> " >>width=<width>,height=<height>,interlaced=<0/1>,\n" >> " polarities=<polarities >>mask>,pixelclock=<pixelclock Hz>,\n" >> @@ -148,6 +151,7 @@ enum timing_opts { >> GTF, >> FPS, >> REDUCED_BLANK, >> + USE_RB_V2, >> }; >> >> static int parse_timing_subopt(char **subopt_str, int *value) >> @@ -175,6 +179,7 @@ static int parse_timing_subopt(char **subopt_str, >>int *value) >> "gtf", >> "fps", >> "reduced-blanking", >> + "use-rb-v2", >> NULL >> }; >> >> @@ -205,6 +210,7 @@ static void get_cvt_gtf_timings(char *subopt, int >>standard, >> int fps = 0; >> int r_blank = 0; >> int interlaced = 0; >> + int use_rb_v2 = 0; >> >> bool timings_valid = false; >> >> @@ -231,6 +237,8 @@ static void get_cvt_gtf_timings(char *subopt, int >>standard, >> case INTERLACED: >> interlaced = opt_val; >> break; >> + case USE_RB_V2: >> + use_rb_v2 = opt_val; >> default: >> break; >> } >> @@ -240,7 +248,8 @@ static void get_cvt_gtf_timings(char *subopt, int >>standard, >> timings_valid = calc_cvt_modeline(width, height, fps, >> r_blank == 1 ? true : false, >> interlaced == 1 ? true : false, >> - false, bt); >> + use_rb_v2 == 1 ? true : false, >> + bt); >> } else { >> timings_valid = calc_gtf_modeline(width, height, fps, >> r_blank == 1 ? true : false, >> > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in
diff --git a/utils/v4l2-ctl/v4l2-ctl-stds.cpp b/utils/v4l2-ctl/v4l2-ctl-stds.cpp index c0e919b..9734c80 100644 --- a/utils/v4l2-ctl/v4l2-ctl-stds.cpp +++ b/utils/v4l2-ctl/v4l2-ctl-stds.cpp @@ -41,7 +41,10 @@ void stds_usage(void) " index=<index>: use the index as provided by --list-dv-timings\n" " or specify timings using cvt/gtf options as follows:\n" " cvt/gtf,width=<width>,height=<height>,fps=<frames per sec>\n" - " interlaced=<0/1>,reduced-blanking=<0/1>\n" + " interlaced=<0/1>,reduced-blanking=<0/1>,use-rb-v2=<0/1>\n" + " use-rb-v2 indicates whether to use reduced blanking version 2\n" + " or not. This flag is relevant only for cvt timings and has\n" + " effect only if reduced-blanking=1\n" " or give a fully specified timings:\n" " width=<width>,height=<height>,interlaced=<0/1>,\n" " polarities=<polarities mask>,pixelclock=<pixelclock Hz>,\n" @@ -148,6 +151,7 @@ enum timing_opts { GTF, FPS, REDUCED_BLANK, + USE_RB_V2, }; static int parse_timing_subopt(char **subopt_str, int *value) @@ -175,6 +179,7 @@ static int parse_timing_subopt(char **subopt_str, int *value) "gtf", "fps", "reduced-blanking", + "use-rb-v2", NULL }; @@ -205,6 +210,7 @@ static void get_cvt_gtf_timings(char *subopt, int standard, int fps = 0; int r_blank = 0; int interlaced = 0; + int use_rb_v2 = 0; bool timings_valid = false; @@ -231,6 +237,8 @@ static void get_cvt_gtf_timings(char *subopt, int standard, case INTERLACED: interlaced = opt_val; break; + case USE_RB_V2: + use_rb_v2 = opt_val; default: break; } @@ -240,7 +248,8 @@ static void get_cvt_gtf_timings(char *subopt, int standard, timings_valid = calc_cvt_modeline(width, height, fps, r_blank == 1 ? true : false, interlaced == 1 ? true : false, - false, bt); + use_rb_v2 == 1 ? true : false, + bt); } else { timings_valid = calc_gtf_modeline(width, height, fps, r_blank == 1 ? true : false,
To support the timings calculations for reduced blanking version 2 (RB v2), extended the command line options to include flag indicating whether to use RB V2 or not. Updated the command usage for the same. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Prashant Laddha <prladdha@cisco.com> --- utils/v4l2-ctl/v4l2-ctl-stds.cpp | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)