@@ -64,6 +64,7 @@ IOCTLS = \
$(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \
$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \
$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \
+ $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/cec.h) \
$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
DEFINES = \
@@ -100,6 +101,7 @@ STRUCTS = \
$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/ && !/_old/)' $(srctree)/include/uapi/linux/dvb/net.h) \
$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \
$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \
+ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/cec.h) \
$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h)
@@ -324,6 +324,16 @@ in the frequency range from 87,5 to 108,0 MHz</title>
<subtitle>Specification Version 1.4a</subtitle>
</biblioentry>
+ <biblioentry id="hdmi2">
+ <abbrev>HDMI2</abbrev>
+ <authorgroup>
+ <corpauthor>HDMI Licensing LLC
+(<ulink url="http://www.hdmi.org">http://www.hdmi.org</ulink>)</corpauthor>
+ </authorgroup>
+ <title>High-Definition Multimedia Interface</title>
+ <subtitle>Specification Version 2.0</subtitle>
+ </biblioentry>
+
<biblioentry id="dp">
<abbrev>DP</abbrev>
<authorgroup>
new file mode 100644
@@ -0,0 +1,74 @@
+<partinfo>
+ <authorgroup>
+ <author>
+ <firstname>Hans</firstname>
+ <surname>Verkuil</surname>
+ <affiliation><address><email>hans.verkuil@cisco.com</email></address></affiliation>
+ <contrib>Initial version.</contrib>
+ </author>
+ </authorgroup>
+ <copyright>
+ <year>2015</year>
+ <holder>Hans Verkuil</holder>
+ </copyright>
+
+ <revhistory>
+ <!-- Put document revisions here, newest first. -->
+ <revision>
+ <revnumber>1.0.0</revnumber>
+ <date>2015-04-27</date>
+ <authorinitials>hv</authorinitials>
+ <revremark>Initial revision</revremark>
+ </revision>
+ </revhistory>
+</partinfo>
+
+<title>CEC API</title>
+
+<chapter id="cec-api">
+ <title>CEC: Consumer Electronics Control</title>
+
+ <section id="cec-intro">
+ <title>Introduction</title>
+ <para>HDMI connectors provide a single pin for use by the Consumer Electronics
+ Control protocol. This protocol allows different devices connected by an HDMI cable
+ to communicate. The protocol for CEC version 1.4 is defined in supplements 1 (CEC)
+ and 2 (HEAC or HDMI Ethernet and Audio Return Channel) of the HDMI 1.4a
+ (<xref linkend="hdmi" />) specification and the extensions added to CEC version 2.0
+ are defined in chapter 11 of the HDMI 2.0 (<xref linkend="hdmi2" />) specification.
+ </para>
+
+ <para>The bitrate is very slow (effectively no more than 36 bytes per second) and
+ is based on the ancient AV.link protocol used in old SCART connectors. The protocol
+ closely resembles a crazy Rube Goldberg contraption and is an unholy mix of low and
+ high level messages. Some messages, especially those part of the HEAC protocol layered
+ on top of CEC, need to be handled by the kernel, others can be handled either by the
+ kernel or by userspace.</para>
+
+ <para>In addition, CEC can be implemented in HDMI receivers, transmitters and in USB
+ devices that have an HDMI input and an HDMI output and that control just the CEC pin.</para>
+
+ <para>Drivers that support CEC and that allow (or require) userspace to handle CEC
+ messages and/or configure the CEC adapter will create a CEC device node (/dev/cecX)
+ to give userspace access to the CEC adapter. The &CEC-G-CAPS; ioctl will tell userspace
+ what it is allowed to do.</para>
+ </section>
+</chapter>
+
+<appendix id="cec-user-func">
+ <title>Function Reference</title>
+ <!-- Keep this alphabetically sorted. -->
+ &sub-cec-func-open;
+ &sub-cec-func-close;
+ &sub-cec-func-ioctl;
+ &sub-cec-func-poll;
+ <!-- All ioctls go here. -->
+ &sub-cec-ioc-g-caps;
+ &sub-cec-ioc-receive;
+ &sub-cec-ioc-g-adap-log-addrs;
+ &sub-cec-ioc-g-adap-state;
+ &sub-cec-ioc-g-adap-phys-addr;
+ &sub-cec-ioc-g-event;
+ &sub-cec-ioc-g-vendor-id;
+ &sub-cec-ioc-g-passthrough;
+</appendix>
new file mode 100644
@@ -0,0 +1,59 @@
+<refentry id="cec-func-close">
+ <refmeta>
+ <refentrytitle>cec close()</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>cec-close</refname>
+ <refpurpose>Close a cec device</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcsynopsisinfo>#include <unistd.h></funcsynopsisinfo>
+ <funcprototype>
+ <funcdef>int <function>close</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>Closes the cec device. Resources associated with the file descriptor
+ are freed. The device configuration remain unchanged.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Return Value</title>
+
+ <para><function>close</function> returns 0 on success. On error, -1 is
+ returned, and <varname>errno</varname> is set appropriately. Possible error
+ codes are:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>EBADF</errorcode></term>
+ <listitem>
+ <para><parameter>fd</parameter> is not a valid open file descriptor.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,73 @@
+<refentry id="cec-func-ioctl">
+ <refmeta>
+ <refentrytitle>cec ioctl()</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>cec-ioctl</refname>
+ <refpurpose>Control a cec device</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcsynopsisinfo>#include <sys/ioctl.h></funcsynopsisinfo>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>void *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC ioctl request code as defined in the cec.h header file,
+ for example CEC_G_CAPS.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para>Pointer to a request-specific structure.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+ <para>The <function>ioctl()</function> function manipulates cec device
+ parameters. The argument <parameter>fd</parameter> must be an open file
+ descriptor.</para>
+ <para>The ioctl <parameter>request</parameter> code specifies the cec
+ function to be called. It has encoded in it whether the argument is an
+ input, output or read/write parameter, and the size of the argument
+ <parameter>argp</parameter> in bytes.</para>
+ <para>Macros and structures definitions specifying cec ioctl requests and
+ their parameters are located in the cec.h header file. All cec ioctl
+ requests, their respective function and parameters are specified in
+ <xref linkend="cec-user-func" />.</para>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+
+ <para>Request-specific error codes are listed in the
+ individual requests descriptions.</para>
+ <para>When an ioctl that takes an output or read/write parameter fails,
+ the parameter remains unmodified.</para>
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,94 @@
+<refentry id="cec-func-open">
+ <refmeta>
+ <refentrytitle>cec open()</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>cec-open</refname>
+ <refpurpose>Open a cec device</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcsynopsisinfo>#include <fcntl.h></funcsynopsisinfo>
+ <funcprototype>
+ <funcdef>int <function>open</function></funcdef>
+ <paramdef>const char *<parameter>device_name</parameter></paramdef>
+ <paramdef>int <parameter>flags</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>device_name</parameter></term>
+ <listitem>
+ <para>Device to be opened.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>flags</parameter></term>
+ <listitem>
+ <para>Open flags. Access mode must be either <constant>O_RDONLY</constant>
+ or <constant>O_RDWR</constant>. Other flags have no effect.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+ <refsect1>
+ <title>Description</title>
+ <para>To open a cec device applications call <function>open()</function>
+ with the desired device name. The function has no side effects; the device
+ configuration remain unchanged.</para>
+ <para>When the device is opened in read-only mode, attempts to modify its
+ configuration will result in an error, and <varname>errno</varname> will be
+ set to <errorcode>EBADF</errorcode>.</para>
+ </refsect1>
+ <refsect1>
+ <title>Return Value</title>
+
+ <para><function>open</function> returns the new file descriptor on success.
+ On error, -1 is returned, and <varname>errno</varname> is set appropriately.
+ Possible error codes are:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>EACCES</errorcode></term>
+ <listitem>
+ <para>The requested access to the file is not allowed.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EMFILE</errorcode></term>
+ <listitem>
+ <para>The process already has the maximum number of files open.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>ENFILE</errorcode></term>
+ <listitem>
+ <para>The system limit on the total number of open files has been
+ reached.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>ENOMEM</errorcode></term>
+ <listitem>
+ <para>Insufficient kernel memory was available.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>ENXIO</errorcode></term>
+ <listitem>
+ <para>No device corresponding to this device special file exists.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,89 @@
+<refentry id="cec-func-poll">
+ <refmeta>
+ <refentrytitle>cec poll()</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>cec-poll</refname>
+ <refpurpose>Wait for some event on a file descriptor</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcsynopsisinfo>#include <sys/poll.h></funcsynopsisinfo>
+ <funcprototype>
+ <funcdef>int <function>poll</function></funcdef>
+ <paramdef>struct pollfd *<parameter>ufds</parameter></paramdef>
+ <paramdef>unsigned int <parameter>nfds</parameter></paramdef>
+ <paramdef>int <parameter>timeout</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>With the <function>poll()</function> function applications
+can wait for CEC events.</para>
+
+ <para>On success <function>poll()</function> returns the number of
+file descriptors that have been selected (that is, file descriptors
+for which the <structfield>revents</structfield> field of the
+respective <structname>pollfd</structname> structure is non-zero).
+CEC devices set the <constant>POLLIN</constant> and
+<constant>POLLRDNORM</constant> flags in the
+<structfield>revents</structfield> field if there are messages in the
+receive queue. If the transmit queue has room for new messages, the
+<constant>POLLOUT</constant> and <constant>POLLWRNORM</constant>
+flags are set. If there are events in the event queue, then the
+<constant>POLLPRI</constant> flag is set.
+When the function timed out it returns a value of zero, on
+failure it returns <returnvalue>-1</returnvalue> and the
+<varname>errno</varname> variable is set appropriately.
+</para>
+
+ <para>For more details see the
+<function>poll()</function> manual page.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Return Value</title>
+
+ <para>On success, <function>poll()</function> returns the number
+structures which have non-zero <structfield>revents</structfield>
+fields, or zero if the call timed out. On error
+<returnvalue>-1</returnvalue> is returned, and the
+<varname>errno</varname> variable is set appropriately:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>EBADF</errorcode></term>
+ <listitem>
+ <para>One or more of the <parameter>ufds</parameter> members
+specify an invalid file descriptor.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EFAULT</errorcode></term>
+ <listitem>
+ <para><parameter>ufds</parameter> references an inaccessible
+memory area.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EINTR</errorcode></term>
+ <listitem>
+ <para>The call was interrupted by a signal.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EINVAL</errorcode></term>
+ <listitem>
+ <para>The <parameter>nfds</parameter> argument is greater
+than <constant>OPEN_MAX</constant>.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,299 @@
+<refentry id="cec-ioc-g-adap-log-addrs">
+ <refmeta>
+ <refentrytitle>ioctl CEC_G_ADAP_LOG_ADDRS, CEC_S_ADAP_LOG_ADDRS</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_G_ADAP_LOG_ADDRS</refname>
+ <refname>CEC_S_ADAP_LOG_ADDRS</refname>
+ <refpurpose>Get or set the logical addresses</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct cec_log_addrs *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_G_ADAP_LOG_ADDRS, CEC_S_ADAP_LOG_ADDRS</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>To query the current CEC logical addresses applications call the
+<constant>CEC_G_ADAP_LOG_ADDRS</constant> ioctl with a pointer to a
+<structname>cec_log_addrs</structname> structure where the drivers stores the
+logical addresses.</para>
+
+ <para>To set new logical addresses applications fill in struct <structname>cec_log_addrs</structname>
+and call the <constant>CEC_S_ADAP_LOG_ADDRS</constant> ioctl with a pointer to this struct.
+The <constant>CEC_S_ADAP_LOG_ADDRS</constant> ioctl is only available if
+<constant>CEC_CAP_LOG_ADDRS</constant> is set. This ioctl will block until all
+requested logical addresses have been claimed.</para>
+
+ <table pgwide="1" frame="none" id="cec-log-addrs">
+ <title>struct <structname>cec_log_addrs</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>cec_version</structfield></entry>
+ <entry>The CEC version that this adapter shall use. See
+ <xref linkend="cec-versions" />.
+ Used to implement the <constant>CEC_MSG_CEC_VERSION</constant> and
+ <constant>CEC_MSG_REPORT_FEATURES</constant> messages. Note that
+ <constant>CEC_OP_CEC_VERSION_1_3A</constant> is not allowed
+ by the CEC framework.
+ </entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>num_log_addrs</structfield></entry>
+ <entry>Number of logical addresses to set up. Must be ≤
+ <structfield>available_log_addrs</structfield> as returned by
+ &CEC-G-CAPS;. All arrays in this structure are only filled up to
+ index <structfield>available_log_addrs</structfield>-1. The remaining
+ array elements will be ignored. Note that the CEC 2.0 standard allows
+ for a maximum of 2 logical addresses, although some hardware has support
+ for more. <constant>CEC_MAX_LOG_ADDRS</constant> is 4. The driver will
+ return the actual number of logical addresses it could claim, which may
+ be less than what was requested. If this field is set to 0, then the
+ CEC adapter shall clear all claimed logical addresses and all other
+ fields will be ignored.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>primary_device_type</structfield>[CEC_MAX_LOG_ADDRS]</entry>
+ <entry>Primary device type for each logical address. See
+ <xref linkend="cec-prim-dev-types" /> for possible types.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>log_addr_type</structfield>[CEC_MAX_LOG_ADDRS]</entry>
+ <entry>Logical address types. See <xref linkend="cec-log-addr-types" /> for
+ possible types. The driver will update this with the actual logical address
+ type that it claimed (e.g. it may have to fallback to
+ <constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant>).</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>log_addr</structfield>[CEC_MAX_LOG_ADDRS]</entry>
+ <entry>The actual logical addresses that were claimed. This is set by the
+ driver. If no logical address could be claimed, then it is set to
+ <constant>CEC_LOG_ADDR_INVALID</constant>.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>all_device_types</structfield></entry>
+ <entry>CEC 2.0 specific: all device types. See <xref linkend="cec-all-dev-types-flags" />.
+ Used to implement the <constant>CEC_MSG_REPORT_FEATURES</constant> message.
+ This field is ignored if <structfield>cec_version</structfield> <
+ <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>features</structfield>[CEC_MAX_LOG_ADDRS][12]</entry>
+ <entry>Features for each logical address. Used to implement the
+ <constant>CEC_MSG_REPORT_FEATURES</constant> message. The 12 bytes include
+ both the RC Profile and the Device Features.
+ This field is ignored if <structfield>cec_version</structfield> <
+ <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>reserved</structfield>[65]</entry>
+ <entry>Reserved for future extensions. Drivers and applications must
+ set this array to zero.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="cec-versions">
+ <title>CEC Versions</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_OP_CEC_VERSION_1_3A</constant></entry>
+ <entry>4</entry>
+ <entry>CEC version according to the HDMI 1.3a standard.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_CEC_VERSION_1_4B</constant></entry>
+ <entry>5</entry>
+ <entry>CEC version according to the HDMI 1.4b standard.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_CEC_VERSION_2_0</constant></entry>
+ <entry>6</entry>
+ <entry>CEC version according to the HDMI 2.0 standard.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="cec-prim-dev-types">
+ <title>CEC Primary Device Types</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_OP_PRIM_DEVTYPE_TV</constant></entry>
+ <entry>0</entry>
+ <entry>Use for a TV.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_PRIM_DEVTYPE_RECORD</constant></entry>
+ <entry>1</entry>
+ <entry>Use for a recording device.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_PRIM_DEVTYPE_TUNER</constant></entry>
+ <entry>3</entry>
+ <entry>Use for a device with a tuner.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_PRIM_DEVTYPE_PLAYBACK</constant></entry>
+ <entry>4</entry>
+ <entry>Use for a playback device.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM</constant></entry>
+ <entry>5</entry>
+ <entry>Use for an audio system (e.g. an audio/video receiver).</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_PRIM_DEVTYPE_SWITCH</constant></entry>
+ <entry>6</entry>
+ <entry>Use for a CEC switch.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_PRIM_DEVTYPE_VIDEOPROC</constant></entry>
+ <entry>7</entry>
+ <entry>Use for a video processor device.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="cec-log-addr-types">
+ <title>CEC Logical Address Types</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_LOG_ADDR_TYPE_TV</constant></entry>
+ <entry>0</entry>
+ <entry>Use for a TV.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_LOG_ADDR_TYPE_RECORD</constant></entry>
+ <entry>1</entry>
+ <entry>Use for a recording device.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_LOG_ADDR_TYPE_TUNER</constant></entry>
+ <entry>2</entry>
+ <entry>Use for a tuner device.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_LOG_ADDR_TYPE_PLAYBACK</constant></entry>
+ <entry>3</entry>
+ <entry>Use for a playback device.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_LOG_ADDR_TYPE_AUDIOSYSTEM</constant></entry>
+ <entry>4</entry>
+ <entry>Use for an audio system device.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_LOG_ADDR_TYPE_SPECIFIC</constant></entry>
+ <entry>5</entry>
+ <entry>Use for a second TV or for a video processor device.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant></entry>
+ <entry>6</entry>
+ <entry>Fallback if all relevant logical addresses are claimed, or for
+ pure CEC switches or CDC-only devices (CDC: Capability Discovery and Control).</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="cec-all-dev-types-flags">
+ <title>CEC All Device Types Flags</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_OP_ALL_DEVTYPE_TV</constant></entry>
+ <entry>0x80</entry>
+ <entry>This supports the TV type.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_ALL_DEVTYPE_RECORD</constant></entry>
+ <entry>0x40</entry>
+ <entry>This supports the Recording type.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_ALL_DEVTYPE_TUNER</constant></entry>
+ <entry>0x20</entry>
+ <entry>This supports the Tuner type.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_ALL_DEVTYPE_PLAYBACK</constant></entry>
+ <entry>0x10</entry>
+ <entry>This supports the Playback type.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM</constant></entry>
+ <entry>0x08</entry>
+ <entry>This supports the Audio System type.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_OP_ALL_DEVTYPE_SWITCH</constant></entry>
+ <entry>0x04</entry>
+ <entry>This supports the CEC Switch or Video Processing type.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,78 @@
+<refentry id="cec-ioc-g-adap-phys-addr">
+ <refmeta>
+ <refentrytitle>ioctl CEC_G_ADAP_PHYS_ADDR, CEC_S_ADAP_PHYS_ADDR</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_G_ADAP_PHYS_ADDR</refname>
+ <refname>CEC_S_ADAP_PHYS_ADDR</refname>
+ <refpurpose>Get or set the physical address</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>__u16 *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_G_ADAP_PHYS_ADDR, CEC_S_ADAP_PHYS_ADDR</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>To query the current physical address applications call the
+<constant>CEC_G_ADAP_PHYS_ADDR</constant> ioctl with a pointer to an __u16
+where the driver stores the physical address.</para>
+
+ <para>To set a new physical address applications store the physical address in
+an __u16 and call the <constant>CEC_S_ADAP_PHYS_ADDR</constant> ioctl with a
+pointer to this integer. <constant>CEC_S_ADAP_PHYS_ADDR</constant> is only
+available if <constant>CEC_CAP_PHYS_ADDR</constant> is set.</para>
+
+ <para>The physical address is a 16-bit number where each group of 4 bits
+represent a digit of the physical address a.b.c.d where the most significant
+4 bits represent 'a'. The CEC root device (usually the TV) has address 0.0.0.0.
+Every device that is hooked up to an input of the TV has address a.0.0.0 (where
+'a' is ≥ 1), devices hooked up to those in turn have addresses a.b.0.0, etc.
+So a topology of up to 5 devices deep is supported. The physical address a
+device shall use is stored in the EDID of the sink.</para>
+
+<para>For example, the EDID for each HDMI input of the TV will have a different
+physical address of the form a.0.0.0 that the sources will read out and use as
+their physical address.</para>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,87 @@
+<refentry id="cec-ioc-g-adap-state">
+ <refmeta>
+ <refentrytitle>ioctl CEC_G_ADAP_STATE, CEC_S_ADAP_STATE</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_G_ADAP_STATE</refname>
+ <refname>CEC_S_ADAP_STATE</refname>
+ <refpurpose>Get or set the adapter state</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>__u32 *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_G_ADAP_STATE, CEC_S_ADAP_STATE</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>To query the current adapter state applications call the
+<constant>CEC_G_ADAP_STATE</constant> ioctl with a pointer to an __u32
+where the driver stores the state.</para>
+
+ <para>To set the adapter state applications store the CEC adapter state
+in an __u32 and call the <constant>CEC_S_ADAP_STATE</constant> ioctl with a
+pointer to this integer. <constant>CEC_S_ADAP_STATE</constant> is only
+available if <constant>CEC_CAP_STATE</constant> is set.</para>
+
+ <para>Available states are:</para>
+
+ <table pgwide="1" frame="none" id="cec-adap-states">
+ <title>Adapter States</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_STATE_DISABLED</constant></entry>
+ <entry>0</entry>
+ <entry>The adapter is disabled.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_STATE_ENABLED</constant></entry>
+ <entry>1</entry>
+ <entry>The adapter is enabled.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,138 @@
+<refentry id="cec-ioc-g-caps">
+ <refmeta>
+ <refentrytitle>ioctl CEC_G_CAPS</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_G_CAPS</refname>
+ <refpurpose>Query device capabilities</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct cec_caps *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_G_CAPS</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>All cec devices must support the <constant>CEC_G_CAPS</constant>
+ ioctl. To query device information, applications call the ioctl with a
+ pointer to a &cec-caps;. The driver fills the structure and returns
+ the information to the application.
+ The ioctl never fails.</para>
+
+ <table pgwide="1" frame="none" id="cec-caps">
+ <title>struct <structname>cec_caps</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>available_log_addrs</structfield></entry>
+ <entry>How many logical addresses does the CEC adapter support. This will
+ be at most <constant>CEC_MAX_LOG_ADDRS</constant>.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>capabilities</structfield></entry>
+ <entry>The capabilities of the CEC adapter, see <xref
+ linkend="cec-capabilities" />.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>reserved</structfield>[40]</entry>
+ <entry>Reserved for future extensions. Drivers must
+ set this array to zero.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="cec-capabilities">
+ <title>CEC Capabilities Flags</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_CAP_STATE</constant></entry>
+ <entry>0x00000001</entry>
+ <entry>Userspace has to configure the adapter state (enable or disable it) by
+ calling &CEC-S-ADAP-STATE;.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_CAP_PHYS_ADDR</constant></entry>
+ <entry>0x00000002</entry>
+ <entry>Userspace has to configure the physical address by
+ calling &CEC-S-ADAP-PHYS-ADDR;.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_CAP_LOG_ADDRS</constant></entry>
+ <entry>0x00000004</entry>
+ <entry>Userspace has to configure the logical addresses by
+ calling &CEC-S-ADAP-LOG-ADDRS;.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_CAP_TRANSMIT</constant></entry>
+ <entry>0x00000008</entry>
+ <entry>Userspace can transmit messages by calling &CEC-TRANSMIT;.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_CAP_RECEIVE</constant></entry>
+ <entry>0x00000010</entry>
+ <entry>Userspace can receive messages by calling &CEC-RECEIVE;.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_CAP_VENDOR_ID</constant></entry>
+ <entry>0x00000020</entry>
+ <entry>Userspace has to configure the vendor ID by
+ calling &CEC-S-VENDOR-ID;.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_CAP_PASSTHROUGH</constant></entry>
+ <entry>0x00000040</entry>
+ <entry>Userspace can use the passthrough mode by
+ calling &CEC-S-PASSTHROUGH;.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,125 @@
+<refentry id="cec-ioc-g-event">
+ <refmeta>
+ <refentrytitle>ioctl CEC_G_EVENT</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_G_EVENT</refname>
+ <refpurpose>Get a CEC event</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct cec_event *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_G_EVENT</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>CEC devices can send asynchronous events. These can be retrieved by calling
+ the <constant>CEC_G_EVENT</constant> ioctl. If the file descriptor is in non-blocking
+ mode and no event is pending, then it will return -1 and set errno to the &EAGAIN;.</para>
+
+ <para>There can be up to 40 events queued up. If more events are added, then the oldest event will be discarded.</para>
+
+ <table pgwide="1" frame="none" id="cec-event">
+ <title>struct <structname>cec_event</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u64</entry>
+ <entry><structfield>ts</structfield></entry>
+ <entry>Timestamp of the event in ns.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>event</structfield></entry>
+ <entry>The event, see <xref linkend="cec-events" />.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>sequence</structfield></entry>
+ <entry>For the <constant>CEC_EVENT_GOT_REPLY</constant> event this
+ holds the sequence number of message that requested the reply.
+ </entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>reserved</structfield>[8]</entry>
+ <entry>Reserved for future extensions. Drivers must
+ set this array to zero.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="cec-events">
+ <title>CEC Events</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_EVENT_CONNECT</constant></entry>
+ <entry>1</entry>
+ <entry>Generated when the HDMI cable is connected.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_EVENT_READY</constant></entry>
+ <entry>2</entry>
+ <entry>Generated when all logical addresses are claimed.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_EVENT_DISCONNECT</constant></entry>
+ <entry>3</entry>
+ <entry>Generated when the HDMI cable is disconnected.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_EVENT_GOT_REPLY</constant></entry>
+ <entry>4</entry>
+ <entry>Generated when a reply is received for a previously sent
+ message. Generated only if a reply was requested and only if the
+ message was sent in non-blocking mode.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,88 @@
+<refentry id="cec-ioc-g-passthrough">
+ <refmeta>
+ <refentrytitle>ioctl CEC_G_PASSTHROUGH, CEC_S_PASSTHROUGH</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_G_PASSTHROUGH</refname>
+ <refname>CEC_S_PASSTHROUGH</refname>
+ <refpurpose>Get or set the passthrough mode</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>__u32 *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_G_PASSTHROUGH, CEC_S_PASSTHROUGH</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>To query the current state of the passhrough mode the applications
+ call the <constant>CEC_G_PASSTHROUGH</constant> ioctl with a pointer to an
+ __u32 where the driver stores the state.</para>
+
+ <para>To set the state of the passthrough mode applications store the
+ passthrough mode state in an __u32 and call the <constant>CEC_S_PASSTHROUGH
+ </constant> ioctl with a pointer to this integer.
+ <constant>CEC_S_PASSTHROUGH</constant> is only available if
+ <constant>CEC_CAP_PASSTHROUGH</constant> is set.</para>
+
+ <para>Available states are:</para>
+
+ <table pgwide="1" frame="none" id="cec-adap-passthrough-states">
+ <title>Adapter Passthrough States</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_PASSTHROUGH_DISABLED</constant></entry>
+ <entry>0</entry>
+ <entry>The passthrough mode is disabled.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_PASSTHROUGH_ENABLED</constant></entry>
+ <entry>1</entry>
+ <entry>The passthrough is enabled.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,70 @@
+<refentry id="cec-ioc-g-vendor-id">
+ <refmeta>
+ <refentrytitle>ioctl CEC_G_VENDOR_ID, CEC_S_VENDOR_ID</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_G_VENDOR_ID</refname>
+ <refname>CEC_S_VENDOR_ID</refname>
+ <refpurpose>Get or set vendor ID</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>__u32 *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_G_VENDOR_ID, CEC_S_VENDOR_ID</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>To query the current CEC vendor ID applications call the
+<constant>CEC_G_VENDOR_ID</constant> ioctl with a pointer to an __u32
+where the driver stores the vendor ID.</para>
+
+ <para>To set a new vendor ID applications store the vendor ID in
+an __u32 and call the <constant>CEC_S_VENDOR_ID</constant> ioctl with a
+pointer to this integer. <constant>CEC_S_VENDOR_ID</constant> is only
+available if <constant>CEC_CAP_VENDOR_ID</constant> is set.</para>
+
+ <para>The vendor ID is a 24-bit number that identifies the specific
+vendor or entity. Based on this ID vendor specific commands may be
+defined.</para>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
new file mode 100644
@@ -0,0 +1,185 @@
+<refentry id="cec-ioc-receive">
+ <refmeta>
+ <refentrytitle>ioctl CEC_RECEIVE, CEC_TRANSMIT</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>CEC_RECEIVE</refname>
+ <refname>CEC_TRANSMIT</refname>
+ <refpurpose>Receive or transmit a CEC message</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct cec_msg *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>File descriptor returned by
+ <link linkend='cec-func-open'><function>open()</function></link>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>CEC_RECEIVE, CEC_TRANSMIT</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>To receive a CEC message the application has to fill in the
+ <structname>cec_msg</structname> structure and pass it to the
+ <constant>CEC_RECEIVE</constant> ioctl. <constant>CEC_RECEIVE</constant> is
+ only available if <constant>CEC_CAP_RECEIVE</constant> is set. If the
+ file descriptor is in non-blocking mode and there are no received
+ messages pending, then it will return -1 and set errno to the &EAGAIN;.
+ If the file descriptor is in blocking mode and <structfield>timeout</structfield>
+ is non-zero and no message arrived within <structfield>timeout</structfield>
+ milliseconds, then it will return -1 and set errno to the &ETIMEDOUT;.</para>
+
+ <para>To send a CEC message the application has to fill in the
+ <structname>cec_msg</structname> structure and pass it to the
+ <constant>CEC_TRANSMIT</constant> ioctl. <constant>CEC_TRANSMIT</constant> is
+ only available if <constant>CEC_CAP_TRANSMIT</constant> is set.
+ If there is no more room in the transmit queue, then it will return
+ -1 and set errno to the &EBUSY;.</para>
+
+ <table pgwide="1" frame="none" id="cec-msg">
+ <title>struct <structname>cec_msg</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u64</entry>
+ <entry><structfield>ts</structfield></entry>
+ <entry>Timestamp of when the message was transmitted in ns in the case
+ of <constant>CEC_TRANSMIT</constant> with <structfield>reply</structfield>
+ set to 0, or the timestamp of the received message in all other cases.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>len</structfield></entry>
+ <entry>The length of the message. For <constant>CEC_TRANSMIT</constant> this
+ is filled in by the application. The driver will fill this in for
+ <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant>
+ it will be filled in with the length of the reply message if
+ <structfield>reply</structfield> was set.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>status</structfield></entry>
+ <entry>The status of the message. When used with <constant>CEC_RECEIVE</constant>
+ this is always set to <constant>CEC_RX_STATUS_READY</constant>. When
+ used with <constant>CEC_TRANSMIT</constant> see <xref linkend="cec-tx-status" />
+ for the possible status values.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>timeout</structfield></entry>
+ <entry>The timeout in milliseconds. This is the time we wait for a message to
+ be received. If it is set to 0, then we wait indefinitely.
+ It is ignored by <constant>CEC_TRANSMIT</constant>.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>msg</structfield>[16]</entry>
+ <entry>The message payload. For <constant>CEC_TRANSMIT</constant> this
+ is filled in by the application. The driver will fill this in for
+ <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant>
+ it will be filled in with the payload of the reply message if
+ <structfield>reply</structfield> was set.</entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>reply</structfield></entry>
+ <entry>Wait until this message is replied. If <structfield>reply</structfield>
+ is 0, then don't wait for a reply but return after transmitting the
+ message. If there was an error as indicated by a non-zero <structfield>status</structfield>
+ field, then <structfield>reply</structfield> is set to 0 by the driver.
+ Ignored by <constant>CEC_RECEIVE</constant>.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>sequence</structfield></entry>
+ <entry>The sequence number is automatically assigned by the CEC
+ framework for all transmitted messages. It can be later used by the
+ framework to generate an event if a reply for a message was
+ requested and the message was transmitted in a non-blocking mode.
+ </entry>
+ </row>
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>reserved</structfield>[35]</entry>
+ <entry>Reserved for future extensions. Drivers and applications must
+ set this array to zero.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="cec-tx-status">
+ <title>CEC Transmit Status</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>CEC_TX_STATUS_OK</constant></entry>
+ <entry>0x00</entry>
+ <entry>The message was transmitted successfully.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_TX_STATUS_ARB_LOST</constant></entry>
+ <entry>0x01</entry>
+ <entry>CEC line arbitration was lost.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_TX_STATUS_RETRY_TIMEOUT</constant></entry>
+ <entry>0x02</entry>
+ <entry>The transmit timed out. The timeout period is 200 ms for a polling
+ message and 1 second for other messages as specified by the CEC protocol.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_TX_STATUS_FEATURE_ABORT</constant></entry>
+ <entry>0x04</entry>
+ <entry>The message was transmitted successfully but the reply was
+ <constant>CEC_MSG_FEATURE_ABORT</constant>.</entry>
+ </row>
+ <row>
+ <entry><constant>CEC_TX_STATUS_REPLY_TIMEOUT</constant></entry>
+ <entry>0x08</entry>
+ <entry>The message was transmitted successfully but the reply was never
+ received within the 1 second timeout period (this timeout value is
+ specified by the CEC protocol).</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ </refsect1>
+</refentry>
@@ -38,7 +38,7 @@
<title>LINUX MEDIA INFRASTRUCTURE API</title>
<copyright>
- <year>2009-2014</year>
+ <year>2009-2015</year>
<holder>LinuxTV Developers</holder>
</copyright>
@@ -75,7 +75,7 @@
</mediaobject>
</figure>
<para>The media infrastructure API was designed to control such
- devices. It is divided into four parts.</para>
+ devices. It is divided into five parts.</para>
<para>The first part covers radio, video capture and output,
cameras, analog TV devices and codecs.</para>
<para>The second part covers the
@@ -87,6 +87,7 @@
<xref linkend="fe-delivery-system-t" />.</para>
<para>The third part covers the Remote Controller API.</para>
<para>The fourth part covers the Media Controller API.</para>
+ <para>The fifth part covers the CEC (Consumer Electronics Control) API.</para>
<para>It should also be noted that a media device may also have audio
components, like mixers, PCM capture, PCM playback, etc, which
are controlled via ALSA API.</para>
@@ -107,6 +108,9 @@
<part id="media_common">
&sub-media-controller;
</part>
+<part id="cec">
+&sub-cec-api;
+</part>
<chapter id="gen_errors">
&sub-gen-errors;