@@ -102,17 +102,19 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg)
return readl(isi->regs + reg);
}
-static int configure_geometry(struct atmel_isi *isi, u32 width,
+static void configure_geometry(struct atmel_isi *isi, u32 width,
u32 height, u32 code)
{
u32 cfg2;
/* According to sensor's output format to set cfg2 */
switch (code) {
- /* YUV, including grey */
+ default:
+ /* Grey */
case MEDIA_BUS_FMT_Y8_1X8:
cfg2 = ISI_CFG2_GRAYSCALE | ISI_CFG2_COL_SPACE_YCbCr;
break;
+ /* YUV */
case MEDIA_BUS_FMT_VYUY8_2X8:
cfg2 = ISI_CFG2_YCC_SWAP_MODE_3 | ISI_CFG2_COL_SPACE_YCbCr;
break;
@@ -126,8 +128,6 @@ static int configure_geometry(struct atmel_isi *isi, u32 width,
cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT | ISI_CFG2_COL_SPACE_YCbCr;
break;
/* RGB, TODO */
- default:
- return -EINVAL;
}
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
@@ -138,8 +138,23 @@ static int configure_geometry(struct atmel_isi *isi, u32 width,
cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
& ISI_CFG2_IM_VSIZE_MASK;
isi_writel(isi, ISI_CFG2, cfg2);
+}
- return 0;
+static bool is_supported(struct soc_camera_device *icd,
+ const u32 pixformat)
+{
+ switch (pixformat) {
+ /* YUV, including grey */
+ case V4L2_PIX_FMT_GREY:
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_VYUY:
+ return true;
+ /* RGB, TODO */
+ default:
+ return false;
+ }
}
static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
@@ -390,10 +405,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
/* Disable all interrupts */
isi_writel(isi, ISI_INTDIS, (u32)~0UL);
- ret = configure_geometry(isi, icd->user_width, icd->user_height,
+ configure_geometry(isi, icd->user_width, icd->user_height,
icd->current_fmt->code);
- if (ret < 0)
- return ret;
spin_lock_irq(&isi->lock);
/* Clear any pending interrupt */
@@ -491,6 +504,10 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd,
struct v4l2_mbus_framefmt *mf = &format.format;
int ret;
+ /* check with atmel-isi support format, if not support use YUYV */
+ if (!is_supported(icd, pix->pixelformat))
+ pix->pixelformat = V4L2_PIX_FMT_YUYV;
+
xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
if (!xlate) {
dev_warn(icd->parent, "Format %x not found\n",
@@ -540,6 +557,10 @@ static int isi_camera_try_fmt(struct soc_camera_device *icd,
u32 pixfmt = pix->pixelformat;
int ret;
+ /* check with atmel-isi support format, if not support use YUYV */
+ if (!is_supported(icd, pix->pixelformat))
+ pix->pixelformat = V4L2_PIX_FMT_YUYV;
+
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (pixfmt && !xlate) {
dev_warn(icd->parent, "Format %x not found\n", pixfmt);
After adding the format check in try_fmt()/set_fmt(), we don't need any format check in configure_geometry(). So make configure_geometry() as void type. Signed-off-by: Josh Wu <josh.wu@atmel.com> --- Hi, Laurent For the similiarity between set_fmt() and try_frm() function, it need more work than I thought. So in this patch I didn't touch that part. I plan to try that later. Best Regards, Josh Wu Changes in v4: - correct the comment typo. Changes in v3: - check the whether format is supported, if no then return a default format. - misc changes according to Laurent's feedback. Changes in v2: - new added patch drivers/media/platform/soc_camera/atmel-isi.c | 37 +++++++++++++++++++++------ 1 file changed, 29 insertions(+), 8 deletions(-)