| Message ID | 1461532104-24032-13-git-send-email-ivo.g.dimitrov.75@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon 2016-04-25 00:08:12, Ivaylo Dimitrov wrote: > From: Sakari Ailus <sakari.ailus@iki.fi> > > Document the CSI1/CCP2 properties strobe_clk_inv and strobe_clock > properties. The former tells whether the strobe/clock signal is inverted, > while the latter signifies the clock or strobe mode. > > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> > --- > Documentation/devicetree/bindings/media/video-interfaces.txt | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt > index f5b61bd..f0523f7 100644 > --- a/Documentation/devicetree/bindings/media/video-interfaces.txt > +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt > @@ -114,9 +114,10 @@ Optional endpoint properties > lane and followed by the data lanes in the same order as in data-lanes. > Valid values are 0 (normal) and 1 (inverted). The length of the array > should be the combined length of data-lanes and clock-lanes properties. > - If the lane-polarities property is omitted, the value must be interpreted > - as 0 (normal). This property is valid for serial busses only. > - > +- clock-inv: Clock or strobe signal inversion. > + Possible values: 0 -- not inverted; 1 -- inverted I'd do "clock-inverted". And probably dt people need to be cc-ed on this one. > +- strobe: Whether the clock signal is used as clock or strobe. Used > + with CCP2, for instance. Best regards, Pavel
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index f5b61bd..f0523f7 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -114,9 +114,10 @@ Optional endpoint properties lane and followed by the data lanes in the same order as in data-lanes. Valid values are 0 (normal) and 1 (inverted). The length of the array should be the combined length of data-lanes and clock-lanes properties. - If the lane-polarities property is omitted, the value must be interpreted - as 0 (normal). This property is valid for serial busses only. - +- clock-inv: Clock or strobe signal inversion. + Possible values: 0 -- not inverted; 1 -- inverted +- strobe: Whether the clock signal is used as clock or strobe. Used + with CCP2, for instance. Example -------