diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index baf6fb3..c8adade 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -27,8 +27,6 @@ source "drivers/staging/media/davinci_vpfe/Kconfig"
 
 source "drivers/staging/media/mn88472/Kconfig"
 
-source "drivers/staging/media/mx3/Kconfig"
-
 source "drivers/staging/media/omap1/Kconfig"
 
 source "drivers/staging/media/omap4iss/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 4ba7c6b..508e9ca 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -2,7 +2,6 @@ obj-$(CONFIG_I2C_BCM2048)	+= bcm2048/
 obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_VIDEO_DM365_VPFE)	+= davinci_vpfe/
-obj-$(CONFIG_VIDEO_MX3)		+= mx3/
 obj-$(CONFIG_VIDEO_OMAP1)	+= omap1/
 obj-$(CONFIG_VIDEO_OMAP4)	+= omap4iss/
 obj-$(CONFIG_DVB_MN88472)       += mn88472/
diff --git a/drivers/staging/media/mx3/Kconfig b/drivers/staging/media/mx3/Kconfig
deleted file mode 100644
index 595d5fe..0000000
--- a/drivers/staging/media/mx3/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config VIDEO_MX3
-	tristate "i.MX3x Camera Sensor Interface driver"
-	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
-	depends on MX3_IPU || COMPILE_TEST
-	depends on HAS_DMA
-	select VIDEOBUF2_DMA_CONTIG
-	---help---
-	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
-
-	  This driver is deprecated: it should become a stand-alone driver
-	  instead of using the soc-camera framework.
-
-	  Unless someone is willing to take this on (unlikely with such
-	  ancient hardware) it is going to be removed from the kernel
-	  soon.
diff --git a/drivers/staging/media/mx3/Makefile b/drivers/staging/media/mx3/Makefile
deleted file mode 100644
index 6d91dcd..0000000
--- a/drivers/staging/media/mx3/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# Makefile for i.MX3x Camera Sensor driver
-
-obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
diff --git a/drivers/staging/media/mx3/TODO b/drivers/staging/media/mx3/TODO
deleted file mode 100644
index bc68fa4..0000000
--- a/drivers/staging/media/mx3/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-This driver is deprecated: it should become a stand-alone driver instead of
-using the soc-camera framework.
-
-Unless someone is willing to take this on (unlikely with such ancient
-hardware) it is going to be removed from the kernel soon.
-
-Note that trivial patches will not be accepted anymore, only a full conversion.
-
-If you want to convert this driver, please contact the linux-media mailinglist
-(see http://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/mx3/mx3_camera.c b/drivers/staging/media/mx3/mx3_camera.c
deleted file mode 100644
index aa39e95..0000000
--- a/drivers/staging/media/mx3/mx3_camera.c
+++ /dev/null
@@ -1,1264 +0,0 @@
-/*
- * V4L2 Driver for i.MX3x camera host
- *
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/videodev2.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/dma/ipu-dma.h>
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-dev.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-
-#include <linux/platform_data/media/camera-mx3.h>
-#include <linux/platform_data/dma-imx.h>
-
-#define MX3_CAM_DRV_NAME "mx3-camera"
-
-/* CMOS Sensor Interface Registers */
-#define CSI_REG_START		0x60
-
-#define CSI_SENS_CONF		(0x60 - CSI_REG_START)
-#define CSI_SENS_FRM_SIZE	(0x64 - CSI_REG_START)
-#define CSI_ACT_FRM_SIZE	(0x68 - CSI_REG_START)
-#define CSI_OUT_FRM_CTRL	(0x6C - CSI_REG_START)
-#define CSI_TST_CTRL		(0x70 - CSI_REG_START)
-#define CSI_CCIR_CODE_1		(0x74 - CSI_REG_START)
-#define CSI_CCIR_CODE_2		(0x78 - CSI_REG_START)
-#define CSI_CCIR_CODE_3		(0x7C - CSI_REG_START)
-#define CSI_FLASH_STROBE_1	(0x80 - CSI_REG_START)
-#define CSI_FLASH_STROBE_2	(0x84 - CSI_REG_START)
-
-#define CSI_SENS_CONF_VSYNC_POL_SHIFT		0
-#define CSI_SENS_CONF_HSYNC_POL_SHIFT		1
-#define CSI_SENS_CONF_DATA_POL_SHIFT		2
-#define CSI_SENS_CONF_PIX_CLK_POL_SHIFT		3
-#define CSI_SENS_CONF_SENS_PRTCL_SHIFT		4
-#define CSI_SENS_CONF_SENS_CLKSRC_SHIFT		7
-#define CSI_SENS_CONF_DATA_FMT_SHIFT		8
-#define CSI_SENS_CONF_DATA_WIDTH_SHIFT		10
-#define CSI_SENS_CONF_EXT_VSYNC_SHIFT		15
-#define CSI_SENS_CONF_DIVRATIO_SHIFT		16
-
-#define CSI_SENS_CONF_DATA_FMT_RGB_YUV444	(0UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
-#define CSI_SENS_CONF_DATA_FMT_YUV422		(2UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
-#define CSI_SENS_CONF_DATA_FMT_BAYER		(3UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
-
-#define MAX_VIDEO_MEM 16
-
-struct mx3_camera_buffer {
-	/* common v4l buffer stuff -- must be first */
-	struct vb2_v4l2_buffer vb;
-	struct list_head			queue;
-
-	/* One descriptot per scatterlist (per frame) */
-	struct dma_async_tx_descriptor		*txd;
-
-	/* We have to "build" a scatterlist ourselves - one element per frame */
-	struct scatterlist			sg;
-};
-
-/**
- * struct mx3_camera_dev - i.MX3x camera (CSI) object
- * @dev:		camera device, to which the coherent buffer is attached
- * @icd:		currently attached camera sensor
- * @clk:		pointer to clock
- * @base:		remapped register base address
- * @pdata:		platform data
- * @platform_flags:	platform flags
- * @mclk:		master clock frequency in Hz
- * @capture:		list of capture videobuffers
- * @lock:		protects video buffer lists
- * @active:		active video buffer
- * @idmac_channel:	array of pointers to IPU DMAC DMA channels
- * @soc_host:		embedded soc_host object
- */
-struct mx3_camera_dev {
-	/*
-	 * i.MX3x is only supposed to handle one camera on its Camera Sensor
-	 * Interface. If anyone ever builds hardware to enable more than one
-	 * camera _simultaneously_, they will have to modify this driver too
-	 */
-	struct clk		*clk;
-
-	void __iomem		*base;
-
-	struct mx3_camera_pdata	*pdata;
-
-	unsigned long		platform_flags;
-	unsigned long		mclk;
-	u16			width_flags;	/* max 15 bits */
-
-	struct list_head	capture;
-	spinlock_t		lock;		/* Protects video buffer lists */
-	struct mx3_camera_buffer *active;
-	size_t			buf_total;
-	struct vb2_alloc_ctx	*alloc_ctx;
-	enum v4l2_field		field;
-	int			sequence;
-
-	/* IDMAC / dmaengine interface */
-	struct idmac_channel	*idmac_channel[1];	/* We need one channel */
-
-	struct soc_camera_host	soc_host;
-};
-
-struct dma_chan_request {
-	struct mx3_camera_dev	*mx3_cam;
-	enum ipu_channel	id;
-};
-
-static u32 csi_reg_read(struct mx3_camera_dev *mx3, off_t reg)
-{
-	return __raw_readl(mx3->base + reg);
-}
-
-static void csi_reg_write(struct mx3_camera_dev *mx3, u32 value, off_t reg)
-{
-	__raw_writel(value, mx3->base + reg);
-}
-
-static struct mx3_camera_buffer *to_mx3_vb(struct vb2_v4l2_buffer *vb)
-{
-	return container_of(vb, struct mx3_camera_buffer, vb);
-}
-
-/* Called from the IPU IDMAC ISR */
-static void mx3_cam_dma_done(void *arg)
-{
-	struct idmac_tx_desc *desc = to_tx_desc(arg);
-	struct dma_chan *chan = desc->txd.chan;
-	struct idmac_channel *ichannel = to_idmac_chan(chan);
-	struct mx3_camera_dev *mx3_cam = ichannel->client;
-
-	dev_dbg(chan->device->dev, "callback cookie %d, active DMA %pad\n",
-		desc->txd.cookie, mx3_cam->active ? &sg_dma_address(&mx3_cam->active->sg) : NULL);
-
-	spin_lock(&mx3_cam->lock);
-	if (mx3_cam->active) {
-		struct vb2_v4l2_buffer *vb = &mx3_cam->active->vb;
-		struct mx3_camera_buffer *buf = to_mx3_vb(vb);
-
-		list_del_init(&buf->queue);
-		vb->vb2_buf.timestamp = ktime_get_ns();
-		vb->field = mx3_cam->field;
-		vb->sequence = mx3_cam->sequence++;
-		vb2_buffer_done(&vb->vb2_buf, VB2_BUF_STATE_DONE);
-	}
-
-	if (list_empty(&mx3_cam->capture)) {
-		mx3_cam->active = NULL;
-		spin_unlock(&mx3_cam->lock);
-
-		/*
-		 * stop capture - without further buffers IPU_CHA_BUF0_RDY will
-		 * not get updated
-		 */
-		return;
-	}
-
-	mx3_cam->active = list_entry(mx3_cam->capture.next,
-				     struct mx3_camera_buffer, queue);
-	spin_unlock(&mx3_cam->lock);
-}
-
-/*
- * Videobuf operations
- */
-
-/*
- * Calculate the __buffer__ (not data) size and number of buffers.
- */
-static int mx3_videobuf_setup(struct vb2_queue *vq,
-			unsigned int *count, unsigned int *num_planes,
-			unsigned int sizes[], void *alloc_ctxs[])
-{
-	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-
-	if (!mx3_cam->idmac_channel[0])
-		return -EINVAL;
-
-	alloc_ctxs[0] = mx3_cam->alloc_ctx;
-
-	if (!vq->num_buffers)
-		mx3_cam->sequence = 0;
-
-	if (!*count)
-		*count = 2;
-
-	/* Called from VIDIOC_REQBUFS or in compatibility mode */
-	if (!*num_planes)
-		sizes[0] = icd->sizeimage;
-	else if (sizes[0] < icd->sizeimage)
-		return -EINVAL;
-
-	/* If *num_planes != 0, we have already verified *count. */
-	if (sizes[0] * *count + mx3_cam->buf_total > MAX_VIDEO_MEM * 1024 * 1024)
-		*count = (MAX_VIDEO_MEM * 1024 * 1024 - mx3_cam->buf_total) /
-			sizes[0];
-
-	*num_planes = 1;
-
-	return 0;
-}
-
-static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
-{
-	/* Add more formats as need arises and test possibilities appear... */
-	switch (fourcc) {
-	case V4L2_PIX_FMT_RGB24:
-		return IPU_PIX_FMT_RGB24;
-	case V4L2_PIX_FMT_UYVY:
-	case V4L2_PIX_FMT_RGB565:
-	default:
-		return IPU_PIX_FMT_GENERIC;
-	}
-}
-
-static void mx3_videobuf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct mx3_camera_buffer *buf = to_mx3_vb(vbuf);
-	struct scatterlist *sg = &buf->sg;
-	struct dma_async_tx_descriptor *txd;
-	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
-	struct idmac_video_param *video = &ichan->params.video;
-	const struct soc_mbus_pixelfmt *host_fmt = icd->current_fmt->host_fmt;
-	dma_cookie_t cookie;
-	size_t new_size;
-
-	new_size = icd->sizeimage;
-
-	if (vb2_plane_size(vb, 0) < new_size) {
-		dev_err(icd->parent, "Buffer #%d too small (%lu < %zu)\n",
-			vbuf->vb2_buf.index, vb2_plane_size(vb, 0), new_size);
-		goto error;
-	}
-
-	if (!buf->txd) {
-		sg_dma_address(sg)	= vb2_dma_contig_plane_dma_addr(vb, 0);
-		sg_dma_len(sg)		= new_size;
-
-		txd = dmaengine_prep_slave_sg(
-			&ichan->dma_chan, sg, 1, DMA_DEV_TO_MEM,
-			DMA_PREP_INTERRUPT);
-		if (!txd)
-			goto error;
-
-		txd->callback_param	= txd;
-		txd->callback		= mx3_cam_dma_done;
-
-		buf->txd		= txd;
-	} else {
-		txd = buf->txd;
-	}
-
-	vb2_set_plane_payload(vb, 0, new_size);
-
-	/* This is the configuration of one sg-element */
-	video->out_pixel_fmt = fourcc_to_ipu_pix(host_fmt->fourcc);
-
-	if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
-		/*
-		 * If the IPU DMA channel is configured to transfer generic
-		 * 8-bit data, we have to set up the geometry parameters
-		 * correctly, according to the current pixel format. The DMA
-		 * horizontal parameters in this case are expressed in bytes,
-		 * not in pixels.
-		 */
-		video->out_width	= icd->bytesperline;
-		video->out_height	= icd->user_height;
-		video->out_stride	= icd->bytesperline;
-	} else {
-		/*
-		 * For IPU known formats the pixel unit will be managed
-		 * successfully by the IPU code
-		 */
-		video->out_width	= icd->user_width;
-		video->out_height	= icd->user_height;
-		video->out_stride	= icd->user_width;
-	}
-
-#ifdef DEBUG
-	/* helps to see what DMA actually has written */
-	if (vb2_plane_vaddr(vb, 0))
-		memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
-#endif
-
-	spin_lock_irq(&mx3_cam->lock);
-	list_add_tail(&buf->queue, &mx3_cam->capture);
-
-	if (!mx3_cam->active)
-		mx3_cam->active = buf;
-
-	spin_unlock_irq(&mx3_cam->lock);
-
-	cookie = txd->tx_submit(txd);
-	dev_dbg(icd->parent, "Submitted cookie %d DMA %pad\n",
-		cookie, &sg_dma_address(&buf->sg));
-
-	if (cookie >= 0)
-		return;
-
-	spin_lock_irq(&mx3_cam->lock);
-
-	/* Submit error */
-	list_del_init(&buf->queue);
-
-	if (mx3_cam->active == buf)
-		mx3_cam->active = NULL;
-
-	spin_unlock_irq(&mx3_cam->lock);
-error:
-	vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
-}
-
-static void mx3_videobuf_release(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct mx3_camera_buffer *buf = to_mx3_vb(vbuf);
-	struct dma_async_tx_descriptor *txd = buf->txd;
-	unsigned long flags;
-
-	dev_dbg(icd->parent,
-		"Release%s DMA %pad, queue %sempty\n",
-		mx3_cam->active == buf ? " active" : "", &sg_dma_address(&buf->sg),
-		list_empty(&buf->queue) ? "" : "not ");
-
-	spin_lock_irqsave(&mx3_cam->lock, flags);
-
-	if (mx3_cam->active == buf)
-		mx3_cam->active = NULL;
-
-	/* Doesn't hurt also if the list is empty */
-	list_del_init(&buf->queue);
-
-	if (txd) {
-		buf->txd = NULL;
-		if (mx3_cam->idmac_channel[0])
-			async_tx_ack(txd);
-	}
-
-	spin_unlock_irqrestore(&mx3_cam->lock, flags);
-
-	mx3_cam->buf_total -= vb2_plane_size(vb, 0);
-}
-
-static int mx3_videobuf_init(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct mx3_camera_buffer *buf = to_mx3_vb(vbuf);
-
-	if (!buf->txd) {
-		/* This is for locking debugging only */
-		INIT_LIST_HEAD(&buf->queue);
-		sg_init_table(&buf->sg, 1);
-
-		mx3_cam->buf_total += vb2_plane_size(vb, 0);
-	}
-
-	return 0;
-}
-
-static void mx3_stop_streaming(struct vb2_queue *q)
-{
-	struct soc_camera_device *icd = soc_camera_from_vb2q(q);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
-	struct mx3_camera_buffer *buf, *tmp;
-	unsigned long flags;
-
-	if (ichan)
-		dmaengine_pause(&ichan->dma_chan);
-
-	spin_lock_irqsave(&mx3_cam->lock, flags);
-
-	mx3_cam->active = NULL;
-
-	list_for_each_entry_safe(buf, tmp, &mx3_cam->capture, queue) {
-		list_del_init(&buf->queue);
-		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-	}
-
-	spin_unlock_irqrestore(&mx3_cam->lock, flags);
-}
-
-static struct vb2_ops mx3_videobuf_ops = {
-	.queue_setup	= mx3_videobuf_setup,
-	.buf_queue	= mx3_videobuf_queue,
-	.buf_cleanup	= mx3_videobuf_release,
-	.buf_init	= mx3_videobuf_init,
-	.wait_prepare	= vb2_ops_wait_prepare,
-	.wait_finish	= vb2_ops_wait_finish,
-	.stop_streaming	= mx3_stop_streaming,
-};
-
-static int mx3_camera_init_videobuf(struct vb2_queue *q,
-				     struct soc_camera_device *icd)
-{
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
-	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	q->io_modes = VB2_MMAP | VB2_USERPTR;
-	q->drv_priv = icd;
-	q->ops = &mx3_videobuf_ops;
-	q->mem_ops = &vb2_dma_contig_memops;
-	q->buf_struct_size = sizeof(struct mx3_camera_buffer);
-	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-	q->lock = &ici->host_lock;
-
-	return vb2_queue_init(q);
-}
-
-/* First part of ipu_csi_init_interface() */
-static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam)
-{
-	u32 conf;
-	long rate;
-
-	/* Set default size: ipu_csi_set_window_size() */
-	csi_reg_write(mx3_cam, (640 - 1) | ((480 - 1) << 16), CSI_ACT_FRM_SIZE);
-	/* ...and position to 0:0: ipu_csi_set_window_pos() */
-	conf = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000;
-	csi_reg_write(mx3_cam, conf, CSI_OUT_FRM_CTRL);
-
-	/* We use only gated clock synchronisation mode so far */
-	conf = 0 << CSI_SENS_CONF_SENS_PRTCL_SHIFT;
-
-	/* Set generic data, platform-biggest bus-width */
-	conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
-
-	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
-		conf |= 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-	else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
-		conf |= 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-	else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
-		conf |= 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-	else/* if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)*/
-		conf |= 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-
-	if (mx3_cam->platform_flags & MX3_CAMERA_CLK_SRC)
-		conf |= 1 << CSI_SENS_CONF_SENS_CLKSRC_SHIFT;
-	if (mx3_cam->platform_flags & MX3_CAMERA_EXT_VSYNC)
-		conf |= 1 << CSI_SENS_CONF_EXT_VSYNC_SHIFT;
-	if (mx3_cam->platform_flags & MX3_CAMERA_DP)
-		conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
-	if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
-		conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
-	if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
-		conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
-	if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
-		conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
-
-	/* ipu_csi_init_interface() */
-	csi_reg_write(mx3_cam, conf, CSI_SENS_CONF);
-
-	clk_prepare_enable(mx3_cam->clk);
-	rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
-	dev_dbg(mx3_cam->soc_host.v4l2_dev.dev, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
-	if (rate)
-		clk_set_rate(mx3_cam->clk, rate);
-}
-
-static int mx3_camera_add_device(struct soc_camera_device *icd)
-{
-	dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n",
-		 icd->devnum);
-
-	return 0;
-}
-
-static void mx3_camera_remove_device(struct soc_camera_device *icd)
-{
-	dev_info(icd->parent, "MX3 Camera driver detached from camera %d\n",
-		 icd->devnum);
-}
-
-/* Called with .host_lock held */
-static int mx3_camera_clock_start(struct soc_camera_host *ici)
-{
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-
-	mx3_camera_activate(mx3_cam);
-
-	mx3_cam->buf_total = 0;
-
-	return 0;
-}
-
-/* Called with .host_lock held */
-static void mx3_camera_clock_stop(struct soc_camera_host *ici)
-{
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
-
-	if (*ichan) {
-		dma_release_channel(&(*ichan)->dma_chan);
-		*ichan = NULL;
-	}
-
-	clk_disable_unprepare(mx3_cam->clk);
-}
-
-static int test_platform_param(struct mx3_camera_dev *mx3_cam,
-			       unsigned char buswidth, unsigned long *flags)
-{
-	/*
-	 * If requested data width is supported by the platform, use it or any
-	 * possible lower value - i.MX31 is smart enough to shift bits
-	 */
-	if (buswidth > fls(mx3_cam->width_flags))
-		return -EINVAL;
-
-	/*
-	 * Platform specified synchronization and pixel clock polarities are
-	 * only a recommendation and are only used during probing. MX3x
-	 * camera interface only works in master mode, i.e., uses HSYNC and
-	 * VSYNC signals from the sensor
-	 */
-	*flags = V4L2_MBUS_MASTER |
-		V4L2_MBUS_HSYNC_ACTIVE_HIGH |
-		V4L2_MBUS_HSYNC_ACTIVE_LOW |
-		V4L2_MBUS_VSYNC_ACTIVE_HIGH |
-		V4L2_MBUS_VSYNC_ACTIVE_LOW |
-		V4L2_MBUS_PCLK_SAMPLE_RISING |
-		V4L2_MBUS_PCLK_SAMPLE_FALLING |
-		V4L2_MBUS_DATA_ACTIVE_HIGH |
-		V4L2_MBUS_DATA_ACTIVE_LOW;
-
-	return 0;
-}
-
-static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
-				    const unsigned int depth)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
-	unsigned long bus_flags, common_flags;
-	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
-
-	dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret);
-
-	if (ret < 0)
-		return ret;
-
-	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
-	if (!ret) {
-		common_flags = soc_mbus_config_compatible(&cfg,
-							  bus_flags);
-		if (!common_flags) {
-			dev_warn(icd->parent,
-				 "Flags incompatible: camera 0x%x, host 0x%lx\n",
-				 cfg.flags, bus_flags);
-			return -EINVAL;
-		}
-	} else if (ret != -ENOIOCTLCMD) {
-		return ret;
-	}
-
-	return 0;
-}
-
-static bool chan_filter(struct dma_chan *chan, void *arg)
-{
-	struct dma_chan_request *rq = arg;
-	struct mx3_camera_pdata *pdata;
-
-	if (!imx_dma_is_ipu(chan))
-		return false;
-
-	if (!rq)
-		return false;
-
-	pdata = rq->mx3_cam->soc_host.v4l2_dev.dev->platform_data;
-
-	return rq->id == chan->chan_id &&
-		pdata->dma_dev == chan->device->dev;
-}
-
-static const struct soc_mbus_pixelfmt mx3_camera_formats[] = {
-	{
-		.fourcc			= V4L2_PIX_FMT_SBGGR8,
-		.name			= "Bayer BGGR (sRGB) 8 bit",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_NONE,
-		.order			= SOC_MBUS_ORDER_LE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	}, {
-		.fourcc			= V4L2_PIX_FMT_GREY,
-		.name			= "Monochrome 8 bit",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_NONE,
-		.order			= SOC_MBUS_ORDER_LE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-};
-
-/* This will be corrected as we get more formats */
-static bool mx3_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
-{
-	return	fmt->packing == SOC_MBUS_PACKING_NONE ||
-		(fmt->bits_per_sample == 8 &&
-		 fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
-		(fmt->bits_per_sample > 8 &&
-		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
-}
-
-static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
-				  struct soc_camera_format_xlate *xlate)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->parent;
-	int formats = 0, ret;
-	struct v4l2_subdev_mbus_code_enum code = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-		.index = idx,
-	};
-	const struct soc_mbus_pixelfmt *fmt;
-
-	ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code);
-	if (ret < 0)
-		/* No more formats */
-		return 0;
-
-	fmt = soc_mbus_get_fmtdesc(code.code);
-	if (!fmt) {
-		dev_warn(icd->parent,
-			 "Unsupported format code #%u: 0x%x\n", idx, code.code);
-		return 0;
-	}
-
-	/* This also checks support for the requested bits-per-sample */
-	ret = mx3_camera_try_bus_param(icd, fmt->bits_per_sample);
-	if (ret < 0)
-		return 0;
-
-	switch (code.code) {
-	case MEDIA_BUS_FMT_SBGGR10_1X10:
-		formats++;
-		if (xlate) {
-			xlate->host_fmt	= &mx3_camera_formats[0];
-			xlate->code	= code.code;
-			xlate++;
-			dev_dbg(dev, "Providing format %s using code 0x%x\n",
-				mx3_camera_formats[0].name, code.code);
-		}
-		break;
-	case MEDIA_BUS_FMT_Y10_1X10:
-		formats++;
-		if (xlate) {
-			xlate->host_fmt	= &mx3_camera_formats[1];
-			xlate->code	= code.code;
-			xlate++;
-			dev_dbg(dev, "Providing format %s using code 0x%x\n",
-				mx3_camera_formats[1].name, code.code);
-		}
-		break;
-	default:
-		if (!mx3_camera_packing_supported(fmt))
-			return 0;
-	}
-
-	/* Generic pass-through */
-	formats++;
-	if (xlate) {
-		xlate->host_fmt	= fmt;
-		xlate->code	= code.code;
-		dev_dbg(dev, "Providing format %c%c%c%c in pass-through mode\n",
-			(fmt->fourcc >> (0*8)) & 0xFF,
-			(fmt->fourcc >> (1*8)) & 0xFF,
-			(fmt->fourcc >> (2*8)) & 0xFF,
-			(fmt->fourcc >> (3*8)) & 0xFF);
-		xlate++;
-	}
-
-	return formats;
-}
-
-static void configure_geometry(struct mx3_camera_dev *mx3_cam,
-			       unsigned int width, unsigned int height,
-			       const struct soc_mbus_pixelfmt *fmt)
-{
-	u32 ctrl, width_field, height_field;
-
-	if (fourcc_to_ipu_pix(fmt->fourcc) == IPU_PIX_FMT_GENERIC) {
-		/*
-		 * As the CSI will be configured to output BAYER, here
-		 * the width parameter count the number of samples to
-		 * capture to complete the whole image width.
-		 */
-		unsigned int num, den;
-		int ret = soc_mbus_samples_per_pixel(fmt, &num, &den);
-		BUG_ON(ret < 0);
-		width = width * num / den;
-	}
-
-	/* Setup frame size - this cannot be changed on-the-fly... */
-	width_field = width - 1;
-	height_field = height - 1;
-	csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_SENS_FRM_SIZE);
-
-	csi_reg_write(mx3_cam, width_field << 16, CSI_FLASH_STROBE_1);
-	csi_reg_write(mx3_cam, (height_field << 16) | 0x22, CSI_FLASH_STROBE_2);
-
-	csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_ACT_FRM_SIZE);
-
-	/* ...and position */
-	ctrl = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000;
-	/* Sensor does the cropping */
-	csi_reg_write(mx3_cam, ctrl | 0 | (0 << 8), CSI_OUT_FRM_CTRL);
-}
-
-static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam)
-{
-	dma_cap_mask_t mask;
-	struct dma_chan *chan;
-	struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
-	/* We have to use IDMAC_IC_7 for Bayer / generic data */
-	struct dma_chan_request rq = {.mx3_cam = mx3_cam,
-				      .id = IDMAC_IC_7};
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_cap_set(DMA_PRIVATE, mask);
-	chan = dma_request_channel(mask, chan_filter, &rq);
-	if (!chan)
-		return -EBUSY;
-
-	*ichan = to_idmac_chan(chan);
-	(*ichan)->client = mx3_cam;
-
-	return 0;
-}
-
-/*
- * FIXME: learn to use stride != width, then we can keep stride properly aligned
- * and support arbitrary (even) widths.
- */
-static inline void stride_align(__u32 *width)
-{
-	if (ALIGN(*width, 8) < 4096)
-		*width = ALIGN(*width, 8);
-	else
-		*width = *width &  ~7;
-}
-
-/*
- * As long as we don't implement host-side cropping and scaling, we can use
- * default g_crop and cropcap from soc_camera.c
- */
-static int mx3_camera_set_crop(struct soc_camera_device *icd,
-			       const struct v4l2_crop *a)
-{
-	struct v4l2_crop a_writable = *a;
-	struct v4l2_rect *rect = &a_writable.c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct v4l2_subdev_format fmt = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-	struct v4l2_mbus_framefmt *mf = &fmt.format;
-	int ret;
-
-	soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
-	soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
-
-	ret = v4l2_subdev_call(sd, video, s_crop, a);
-	if (ret < 0)
-		return ret;
-
-	/* The capture device might have changed its output sizes */
-	ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
-	if (ret < 0)
-		return ret;
-
-	if (mf->code != icd->current_fmt->code)
-		return -EINVAL;
-
-	if (mf->width & 7) {
-		/* Ouch! We can only handle 8-byte aligned width... */
-		stride_align(&mf->width);
-		ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &fmt);
-		if (ret < 0)
-			return ret;
-	}
-
-	if (mf->width != icd->user_width || mf->height != icd->user_height)
-		configure_geometry(mx3_cam, mf->width, mf->height,
-				   icd->current_fmt->host_fmt);
-
-	dev_dbg(icd->parent, "Sensor cropped %dx%d\n",
-		mf->width, mf->height);
-
-	icd->user_width		= mf->width;
-	icd->user_height	= mf->height;
-
-	return ret;
-}
-
-static int mx3_camera_set_fmt(struct soc_camera_device *icd,
-			      struct v4l2_format *f)
-{
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	const struct soc_camera_format_xlate *xlate;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_subdev_format format = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-	struct v4l2_mbus_framefmt *mf = &format.format;
-	int ret;
-
-	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
-	if (!xlate) {
-		dev_warn(icd->parent, "Format %x not found\n",
-			 pix->pixelformat);
-		return -EINVAL;
-	}
-
-	stride_align(&pix->width);
-	dev_dbg(icd->parent, "Set format %dx%d\n", pix->width, pix->height);
-
-	/*
-	 * Might have to perform a complete interface initialisation like in
-	 * ipu_csi_init_interface() in mxc_v4l2_s_param(). Also consider
-	 * mxc_v4l2_s_fmt()
-	 */
-
-	configure_geometry(mx3_cam, pix->width, pix->height, xlate->host_fmt);
-
-	mf->width	= pix->width;
-	mf->height	= pix->height;
-	mf->field	= pix->field;
-	mf->colorspace	= pix->colorspace;
-	mf->code	= xlate->code;
-
-	ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format);
-	if (ret < 0)
-		return ret;
-
-	if (mf->code != xlate->code)
-		return -EINVAL;
-
-	if (!mx3_cam->idmac_channel[0]) {
-		ret = acquire_dma_channel(mx3_cam);
-		if (ret < 0)
-			return ret;
-	}
-
-	pix->width		= mf->width;
-	pix->height		= mf->height;
-	pix->field		= mf->field;
-	mx3_cam->field		= mf->field;
-	pix->colorspace		= mf->colorspace;
-	icd->current_fmt	= xlate;
-
-	dev_dbg(icd->parent, "Sensor set %dx%d\n", pix->width, pix->height);
-
-	return ret;
-}
-
-static int mx3_camera_try_fmt(struct soc_camera_device *icd,
-			      struct v4l2_format *f)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	const struct soc_camera_format_xlate *xlate;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_subdev_pad_config pad_cfg;
-	struct v4l2_subdev_format format = {
-		.which = V4L2_SUBDEV_FORMAT_TRY,
-	};
-	struct v4l2_mbus_framefmt *mf = &format.format;
-	__u32 pixfmt = pix->pixelformat;
-	int ret;
-
-	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
-	if (pixfmt && !xlate) {
-		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
-		return -EINVAL;
-	}
-
-	/* limit to MX3 hardware capabilities */
-	if (pix->height > 4096)
-		pix->height = 4096;
-	if (pix->width > 4096)
-		pix->width = 4096;
-
-	/* limit to sensor capabilities */
-	mf->width	= pix->width;
-	mf->height	= pix->height;
-	mf->field	= pix->field;
-	mf->colorspace	= pix->colorspace;
-	mf->code	= xlate->code;
-
-	ret = v4l2_subdev_call(sd, pad, set_fmt, &pad_cfg, &format);
-	if (ret < 0)
-		return ret;
-
-	pix->width	= mf->width;
-	pix->height	= mf->height;
-	pix->colorspace	= mf->colorspace;
-
-	switch (mf->field) {
-	case V4L2_FIELD_ANY:
-		pix->field = V4L2_FIELD_NONE;
-		break;
-	case V4L2_FIELD_NONE:
-		break;
-	default:
-		dev_err(icd->parent, "Field type %d unsupported.\n",
-			mf->field);
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static int mx3_camera_reqbufs(struct soc_camera_device *icd,
-			      struct v4l2_requestbuffers *p)
-{
-	return 0;
-}
-
-static unsigned int mx3_camera_poll(struct file *file, poll_table *pt)
-{
-	struct soc_camera_device *icd = file->private_data;
-
-	return vb2_poll(&icd->vb2_vidq, file, pt);
-}
-
-static int mx3_camera_querycap(struct soc_camera_host *ici,
-			       struct v4l2_capability *cap)
-{
-	/* cap->name is set by the firendly caller:-> */
-	strlcpy(cap->card, "i.MX3x Camera", sizeof(cap->card));
-	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
-
-	return 0;
-}
-
-static int mx3_camera_set_bus_param(struct soc_camera_device *icd)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
-	u32 pixfmt = icd->current_fmt->host_fmt->fourcc;
-	unsigned long bus_flags, common_flags;
-	u32 dw, sens_conf;
-	const struct soc_mbus_pixelfmt *fmt;
-	int buswidth;
-	int ret;
-	const struct soc_camera_format_xlate *xlate;
-	struct device *dev = icd->parent;
-
-	fmt = soc_mbus_get_fmtdesc(icd->current_fmt->code);
-	if (!fmt)
-		return -EINVAL;
-
-	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
-	if (!xlate) {
-		dev_warn(dev, "Format %x not found\n", pixfmt);
-		return -EINVAL;
-	}
-
-	buswidth = fmt->bits_per_sample;
-	ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
-
-	dev_dbg(dev, "requested bus width %d bit: %d\n", buswidth, ret);
-
-	if (ret < 0)
-		return ret;
-
-	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
-	if (!ret) {
-		common_flags = soc_mbus_config_compatible(&cfg,
-							  bus_flags);
-		if (!common_flags) {
-			dev_warn(icd->parent,
-				 "Flags incompatible: camera 0x%x, host 0x%lx\n",
-				 cfg.flags, bus_flags);
-			return -EINVAL;
-		}
-	} else if (ret != -ENOIOCTLCMD) {
-		return ret;
-	} else {
-		common_flags = bus_flags;
-	}
-
-	dev_dbg(dev, "Flags cam: 0x%x host: 0x%lx common: 0x%lx\n",
-		cfg.flags, bus_flags, common_flags);
-
-	/* Make choices, based on platform preferences */
-	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
-	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
-		if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
-			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
-		else
-			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
-	}
-
-	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
-	    (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
-		if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
-			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
-		else
-			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
-	}
-
-	if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
-	    (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
-		if (mx3_cam->platform_flags & MX3_CAMERA_DP)
-			common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
-		else
-			common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
-	}
-
-	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
-	    (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
-		if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
-			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
-		else
-			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
-	}
-
-	cfg.flags = common_flags;
-	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
-	if (ret < 0 && ret != -ENOIOCTLCMD) {
-		dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
-			common_flags, ret);
-		return ret;
-	}
-
-	/*
-	 * So far only gated clock mode is supported. Add a line
-	 *	(3 << CSI_SENS_CONF_SENS_PRTCL_SHIFT) |
-	 * below and select the required mode when supporting other
-	 * synchronisation protocols.
-	 */
-	sens_conf = csi_reg_read(mx3_cam, CSI_SENS_CONF) &
-		~((1 << CSI_SENS_CONF_VSYNC_POL_SHIFT) |
-		  (1 << CSI_SENS_CONF_HSYNC_POL_SHIFT) |
-		  (1 << CSI_SENS_CONF_DATA_POL_SHIFT) |
-		  (1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT) |
-		  (3 << CSI_SENS_CONF_DATA_FMT_SHIFT) |
-		  (3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT));
-
-	/* TODO: Support RGB and YUV formats */
-
-	/* This has been set in mx3_camera_activate(), but we clear it above */
-	sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
-
-	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
-		sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
-	if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
-		sens_conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
-	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
-		sens_conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
-	if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
-		sens_conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
-
-	/* Just do what we're asked to do */
-	switch (xlate->host_fmt->bits_per_sample) {
-	case 4:
-		dw = 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-		break;
-	case 8:
-		dw = 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-		break;
-	case 10:
-		dw = 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-		break;
-	default:
-		/*
-		 * Actually it can only be 15 now, default is just to silence
-		 * compiler warnings
-		 */
-	case 15:
-		dw = 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-	}
-
-	csi_reg_write(mx3_cam, sens_conf | dw, CSI_SENS_CONF);
-
-	dev_dbg(dev, "Set SENS_CONF to %x\n", sens_conf | dw);
-
-	return 0;
-}
-
-static struct soc_camera_host_ops mx3_soc_camera_host_ops = {
-	.owner		= THIS_MODULE,
-	.add		= mx3_camera_add_device,
-	.remove		= mx3_camera_remove_device,
-	.clock_start	= mx3_camera_clock_start,
-	.clock_stop	= mx3_camera_clock_stop,
-	.set_crop	= mx3_camera_set_crop,
-	.set_fmt	= mx3_camera_set_fmt,
-	.try_fmt	= mx3_camera_try_fmt,
-	.get_formats	= mx3_camera_get_formats,
-	.init_videobuf2	= mx3_camera_init_videobuf,
-	.reqbufs	= mx3_camera_reqbufs,
-	.poll		= mx3_camera_poll,
-	.querycap	= mx3_camera_querycap,
-	.set_bus_param	= mx3_camera_set_bus_param,
-};
-
-static int mx3_camera_probe(struct platform_device *pdev)
-{
-	struct mx3_camera_pdata	*pdata = pdev->dev.platform_data;
-	struct mx3_camera_dev *mx3_cam;
-	struct resource *res;
-	void __iomem *base;
-	int err = 0;
-	struct soc_camera_host *soc_host;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	if (!pdata)
-		return -EINVAL;
-
-	mx3_cam = devm_kzalloc(&pdev->dev, sizeof(*mx3_cam), GFP_KERNEL);
-	if (!mx3_cam) {
-		dev_err(&pdev->dev, "Could not allocate mx3 camera object\n");
-		return -ENOMEM;
-	}
-
-	mx3_cam->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(mx3_cam->clk))
-		return PTR_ERR(mx3_cam->clk);
-
-	mx3_cam->pdata = pdata;
-	mx3_cam->platform_flags = pdata->flags;
-	if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_MASK)) {
-		/*
-		 * Platform hasn't set available data widths. This is bad.
-		 * Warn and use a default.
-		 */
-		dev_warn(&pdev->dev, "WARNING! Platform hasn't set available "
-			 "data widths, using default 8 bit\n");
-		mx3_cam->platform_flags |= MX3_CAMERA_DATAWIDTH_8;
-	}
-	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
-		mx3_cam->width_flags = 1 << 3;
-	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
-		mx3_cam->width_flags |= 1 << 7;
-	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
-		mx3_cam->width_flags |= 1 << 9;
-	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
-		mx3_cam->width_flags |= 1 << 14;
-
-	mx3_cam->mclk = pdata->mclk_10khz * 10000;
-	if (!mx3_cam->mclk) {
-		dev_warn(&pdev->dev,
-			 "mclk_10khz == 0! Please, fix your platform data. "
-			 "Using default 20MHz\n");
-		mx3_cam->mclk = 20000000;
-	}
-
-	/* list of video-buffers */
-	INIT_LIST_HEAD(&mx3_cam->capture);
-	spin_lock_init(&mx3_cam->lock);
-
-	mx3_cam->base	= base;
-
-	soc_host		= &mx3_cam->soc_host;
-	soc_host->drv_name	= MX3_CAM_DRV_NAME;
-	soc_host->ops		= &mx3_soc_camera_host_ops;
-	soc_host->priv		= mx3_cam;
-	soc_host->v4l2_dev.dev	= &pdev->dev;
-	soc_host->nr		= pdev->id;
-
-	mx3_cam->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
-	if (IS_ERR(mx3_cam->alloc_ctx))
-		return PTR_ERR(mx3_cam->alloc_ctx);
-
-	if (pdata->asd_sizes) {
-		soc_host->asd = pdata->asd;
-		soc_host->asd_sizes = pdata->asd_sizes;
-	}
-
-	err = soc_camera_host_register(soc_host);
-	if (err)
-		goto ecamhostreg;
-
-	/* IDMAC interface */
-	dmaengine_get();
-
-	return 0;
-
-ecamhostreg:
-	vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx);
-	return err;
-}
-
-static int mx3_camera_remove(struct platform_device *pdev)
-{
-	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
-	struct mx3_camera_dev *mx3_cam = container_of(soc_host,
-					struct mx3_camera_dev, soc_host);
-
-	soc_camera_host_unregister(soc_host);
-
-	/*
-	 * The channel has either not been allocated,
-	 * or should have been released
-	 */
-	if (WARN_ON(mx3_cam->idmac_channel[0]))
-		dma_release_channel(&mx3_cam->idmac_channel[0]->dma_chan);
-
-	vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx);
-
-	dmaengine_put();
-
-	return 0;
-}
-
-static struct platform_driver mx3_camera_driver = {
-	.driver		= {
-		.name	= MX3_CAM_DRV_NAME,
-	},
-	.probe		= mx3_camera_probe,
-	.remove		= mx3_camera_remove,
-};
-
-module_platform_driver(mx3_camera_driver);
-
-MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.2.3");
-MODULE_ALIAS("platform:" MX3_CAM_DRV_NAME);
