@@ -876,19 +876,29 @@ static const struct v4l2_subdev_ops adv7180_ops = {
static irqreturn_t adv7180_irq(int irq, void *devid)
{
struct adv7180_state *state = devid;
- u8 isr3;
+ u8 isr1, isr3;
mutex_lock(&state->mutex);
+ isr1 = adv7180_read(state, ADV7180_REG_ISR1);
isr3 = adv7180_read(state, ADV7180_REG_ISR3);
/* clear */
+ adv7180_write(state, ADV7180_REG_ICR1, isr1);
adv7180_write(state, ADV7180_REG_ICR3, isr3);
- if (isr3 & ADV7180_IRQ3_AD_CHANGE) {
- static const struct v4l2_event src_ch = {
+ if ((isr3 & ADV7180_IRQ3_AD_CHANGE) ||
+ (isr1 & (ADV7180_IRQ1_LOCK | ADV7180_IRQ1_UNLOCK))) {
+ static struct v4l2_event src_ch = {
.type = V4L2_EVENT_SOURCE_CHANGE,
- .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
};
+ if (isr3 & ADV7180_IRQ3_AD_CHANGE)
+ src_ch.u.src_change.changes |=
+ V4L2_EVENT_SRC_CH_RESOLUTION;
+
+ if (isr1 & (ADV7180_IRQ1_LOCK | ADV7180_IRQ1_UNLOCK))
+ src_ch.u.src_change.changes |=
+ V4L2_EVENT_SRC_CH_LOCK_STATUS;
+
v4l2_subdev_notify_event(&state->sd, &src_ch);
}
mutex_unlock(&state->mutex);
@@ -1289,7 +1299,9 @@ static int init_device(struct adv7180_state *state)
if (ret < 0)
goto out_unlock;
- ret = adv7180_write(state, ADV7180_REG_IMR1, 0);
+ /* enable lock/unlock interrupts */
+ ret = adv7180_write(state, ADV7180_REG_IMR1,
+ ADV7180_IRQ1_LOCK | ADV7180_IRQ1_UNLOCK);
if (ret < 0)
goto out_unlock;
Enable the SD lock/unlock interrupts and send V4L2_EVENT_SRC_CH_LOCK_STATUS in the interrupt handler on a detected lock/unlock. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> --- v2: - last version of this patch was based on the old reverted autodetect code. This version now only enables the interrupt and sends the event in the interrupt handler. --- drivers/media/i2c/adv7180.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)