Message ID | 1470297242-32129-1-git-send-email-oleg@kaa.org.ua (mailing list archive) |
---|---|
State | Deferred |
Headers | show |
Hi Olli, Looks like I miss something, what parameter do you mean? On 04.08.16 13:08, Olli Salonen wrote: > Hi Oleh, > > Do you have any idea of what this parameter change does? I have a gut > feeling that this is an option that's not Si2158-specific, but a > parameter that's valid for the other tuners as well. > > Do you know what this parameter will actually do? If so, it would be > better to add this as a configuration option for the Si2157. Your > patch will now change the behaviour even for devices that you probably > have not tested. > > Cheers, > -olli > > On 4 August 2016 at 10:54, Oleh Kravchenko <oleg@kaa.org.ua > <mailto:oleg@kaa.org.ua>> wrote: > > Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua > <mailto:oleg@kaa.org.ua>> > --- > drivers/media/tuners/si2157.c | 34 > +++++++++++++++++++++++++++------- > drivers/media/tuners/si2157_priv.h | 1 + > 2 files changed, 28 insertions(+), 7 deletions(-) > > diff --git a/drivers/media/tuners/si2157.c > b/drivers/media/tuners/si2157.c > index 57b2508..d7035a5 100644 > --- a/drivers/media/tuners/si2157.c > +++ b/drivers/media/tuners/si2157.c > @@ -103,12 +103,21 @@ static int si2157_init(struct dvb_frontend *fe) > goto warm; > > /* power up */ > - if (dev->chiptype == SI2157_CHIPTYPE_SI2146) { > - memcpy(cmd.args, > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); > - cmd.wlen = 9; > - } else { > - memcpy(cmd.args, > "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > - cmd.wlen = 15; > + switch (dev->chiptype) { > + case SI2157_CHIPTYPE_SI2146: > + memcpy(cmd.args, > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); > + cmd.wlen = 9; > + break; > + > + case SI2157_CHIPTYPE_SI2158: > + memcpy(cmd.args, > "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > + cmd.wlen = 15; > + break; > + > + default: > + memcpy(cmd.args, > "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > + cmd.wlen = 15; > + break; > } > cmd.rlen = 1; > ret = si2157_cmd_execute(client, &cmd); > @@ -204,6 +213,16 @@ skip_fw_download: > if (ret) > goto err; > > + /* start tuner? */ > + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) { > + memcpy(cmd.args, "\xC0\x00\x0C", 3); > + cmd.wlen = 3; > + cmd.rlen = 1; > + ret = si2157_cmd_execute(client, &cmd); > + if (ret) > + goto err; > + } > + > /* query firmware version */ > memcpy(cmd.args, "\x11", 1); > cmd.wlen = 1; > @@ -506,8 +525,9 @@ static int si2157_remove(struct i2c_client > *client) > } > > static const struct i2c_device_id si2157_id_table[] = { > - {"si2157", SI2157_CHIPTYPE_SI2157}, > {"si2146", SI2157_CHIPTYPE_SI2146}, > + {"si2157", SI2157_CHIPTYPE_SI2157}, > + {"si2158", SI2157_CHIPTYPE_SI2158}, > {} > }; > MODULE_DEVICE_TABLE(i2c, si2157_id_table); > diff --git a/drivers/media/tuners/si2157_priv.h > b/drivers/media/tuners/si2157_priv.h > index d6b2c7b..677fa00 100644 > --- a/drivers/media/tuners/si2157_priv.h > +++ b/drivers/media/tuners/si2157_priv.h > @@ -42,6 +42,7 @@ struct si2157_dev { > > #define SI2157_CHIPTYPE_SI2157 0 > #define SI2157_CHIPTYPE_SI2146 1 > +#define SI2157_CHIPTYPE_SI2158 2 > > /* firmware command struct */ > #define SI2157_ARGLEN 30 > -- > 2.7.3 > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-media" in > the body of a message to majordomo@vger.kernel.org > <mailto:majordomo@vger.kernel.org> > More majordomo info at http://vger.kernel.org/majordomo-info.html > >
I got this from tracing I2C bus of tuner. Windows driver send this to tuner before set frequency, bandwidth, etc.: wC0 | 15 | C0 00 00 00 00 01 01 01 01 01 01 02 00 00 01 | ............... ; I cut firmware from here, by the way Windows driver use firmware v2.1.8 wC0 | 2 | 01 01 | .. ; I don't known what is it, but with(out) it on Linux my tuner work fine! ; I think this is calibration data(?) wC0 | 6 | 14 00 10 06 E8 03 | ...... wC0 | 6 | 14 00 11 06 00 00 | ...... wC0 | 6 | 14 00 23 06 9E 80 | ..#... wC0 | 6 | 14 00 24 06 00 00 | ..$... wC0 | 6 | 14 00 03 06 08 00 | ...... wC0 | 6 | 14 00 07 06 32 C8 | ....2. wC0 | 6 | 14 00 01 06 01 00 | ...... wC0 | 6 | 14 00 13 06 00 03 | ...... wC0 | 6 | 14 00 0C 06 88 13 | ...... wC0 | 6 | 14 00 0D 06 94 64 | .....d wC0 | 6 | 14 00 17 06 00 00 | ...... wC0 | 6 | 14 00 12 06 00 00 | ...... wC0 | 6 | 14 00 05 06 BA 00 | ...... wC0 | 6 | 14 00 04 06 00 02 | ...... wC0 | 6 | 14 00 16 06 00 00 | ...... wC0 | 6 | 14 00 02 04 08 00 | ...... wC0 | 6 | 14 00 01 04 00 00 | ...... wC0 | 6 | 14 00 11 07 00 00 | ...... wC0 | 6 | 14 00 08 07 00 00 | ...... wC0 | 6 | 14 00 02 07 01 00 | ...... wC0 | 6 | 14 00 05 07 32 C8 | ....2. wC0 | 6 | 14 00 0C 07 01 00 | ...... wC0 | 6 | 14 00 01 07 01 00 | ...... wC0 | 6 | 14 00 0D 07 00 00 | ...... wC0 | 6 | 14 00 0E 07 00 00 | ...... wC0 | 6 | 14 00 10 07 00 00 | ...... wC0 | 6 | 14 00 0A 07 00 01 | ...... wC0 | 6 | 14 00 06 07 88 13 | ...... wC0 | 6 | 14 00 07 07 94 1B | ...... wC0 | 6 | 14 00 03 07 28 00 | ....(. wC0 | 6 | 14 00 13 07 FF FF | ...... wC0 | 6 | 14 00 0F 07 00 00 | ...... wC0 | 6 | 14 00 09 07 00 00 | ...... wC0 | 6 | 14 00 04 07 B0 00 | ...... wC0 | 6 | 14 00 12 07 10 00 | ...... wC0 | 6 | 14 00 04 05 00 80 | ...... wC0 | 6 | 14 00 01 05 01 00 | ...... wC0 | 6 | 14 00 05 05 00 07 | ...... wC0 | 6 | 14 00 06 05 01 00 | ...... wC0 | 6 | 14 00 07 05 7F 00 | ...... ; without C0 00 0C tuner is not work wC0 | 3 | C0 00 0C | ... On 04.08.16 14:11, Olli Salonen wrote: > Hi Oleh, > > It would seem to me that when you start the clocks here: > > > "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > > You've removed 0c from third octet compared to the default behaviour. > However, then later in the sequence you run: > > > + /* start tuner? */ > > + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) { > > + memcpy(cmd.args, "\xC0\x00\x0C", 3); > > Ie. there you do change the parameter in the third octet to 0c. I'm > wondering what's the reason and significance of that. Was there a > problem that you solved with this approach? Why is this way better > than the previous way? I'm trying to understand that. > > Cheers, > -olli > > > > On 4 August 2016 at 13:26, Oleh Kravchenko <oleg@kaa.org.ua > <mailto:oleg@kaa.org.ua>> wrote: > > Hi Olli, > > Looks like I miss something, what parameter do you mean? > > On 04.08.16 13:08, Olli Salonen wrote: > > Hi Oleh, > > > > Do you have any idea of what this parameter change does? I have > a gut > > feeling that this is an option that's not Si2158-specific, but a > > parameter that's valid for the other tuners as well. > > > > Do you know what this parameter will actually do? If so, it would be > > better to add this as a configuration option for the Si2157. Your > > patch will now change the behaviour even for devices that you > probably > > have not tested. > > > > Cheers, > > -olli > > > > On 4 August 2016 at 10:54, Oleh Kravchenko <oleg@kaa.org.ua > <mailto:oleg@kaa.org.ua> > > <mailto:oleg@kaa.org.ua <mailto:oleg@kaa.org.ua>>> wrote: > > > > Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua > <mailto:oleg@kaa.org.ua> > > <mailto:oleg@kaa.org.ua <mailto:oleg@kaa.org.ua>>> > > --- > > drivers/media/tuners/si2157.c | 34 > > +++++++++++++++++++++++++++------- > > drivers/media/tuners/si2157_priv.h | 1 + > > 2 files changed, 28 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/media/tuners/si2157.c > > b/drivers/media/tuners/si2157.c > > index 57b2508..d7035a5 100644 > > --- a/drivers/media/tuners/si2157.c > > +++ b/drivers/media/tuners/si2157.c > > @@ -103,12 +103,21 @@ static int si2157_init(struct > dvb_frontend *fe) > > goto warm; > > > > /* power up */ > > - if (dev->chiptype == SI2157_CHIPTYPE_SI2146) { > > - memcpy(cmd.args, > > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); > > - cmd.wlen = 9; > > - } else { > > - memcpy(cmd.args, > > > "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > > - cmd.wlen = 15; > > + switch (dev->chiptype) { > > + case SI2157_CHIPTYPE_SI2146: > > + memcpy(cmd.args, > > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); > > + cmd.wlen = 9; > > + break; > > + > > + case SI2157_CHIPTYPE_SI2158: > > + memcpy(cmd.args, > > > "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > > + cmd.wlen = 15; > > + break; > > + > > + default: > > + memcpy(cmd.args, > > > "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > > + cmd.wlen = 15; > > + break; > > } > > cmd.rlen = 1; > > ret = si2157_cmd_execute(client, &cmd); > > @@ -204,6 +213,16 @@ skip_fw_download: > > if (ret) > > goto err; > > > > + /* start tuner? */ > > + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) { > > + memcpy(cmd.args, "\xC0\x00\x0C", 3); > > + cmd.wlen = 3; > > + cmd.rlen = 1; > > + ret = si2157_cmd_execute(client, &cmd); > > + if (ret) > > + goto err; > > + } > > + > > /* query firmware version */ > > memcpy(cmd.args, "\x11", 1); > > cmd.wlen = 1; > > @@ -506,8 +525,9 @@ static int si2157_remove(struct i2c_client > > *client) > > } > > > > static const struct i2c_device_id si2157_id_table[] = { > > - {"si2157", SI2157_CHIPTYPE_SI2157}, > > {"si2146", SI2157_CHIPTYPE_SI2146}, > > + {"si2157", SI2157_CHIPTYPE_SI2157}, > > + {"si2158", SI2157_CHIPTYPE_SI2158}, > > {} > > }; > > MODULE_DEVICE_TABLE(i2c, si2157_id_table); > > diff --git a/drivers/media/tuners/si2157_priv.h > > b/drivers/media/tuners/si2157_priv.h > > index d6b2c7b..677fa00 100644 > > --- a/drivers/media/tuners/si2157_priv.h > > +++ b/drivers/media/tuners/si2157_priv.h > > @@ -42,6 +42,7 @@ struct si2157_dev { > > > > #define SI2157_CHIPTYPE_SI2157 0 > > #define SI2157_CHIPTYPE_SI2146 1 > > +#define SI2157_CHIPTYPE_SI2158 2 > > > > /* firmware command struct */ > > #define SI2157_ARGLEN 30 > > -- > > 2.7.3 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe > > linux-media" in > > the body of a message to majordomo@vger.kernel.org > <mailto:majordomo@vger.kernel.org> > > <mailto:majordomo@vger.kernel.org > <mailto:majordomo@vger.kernel.org>> > > More majordomo info at > http://vger.kernel.org/majordomo-info.html > > > > > > -- > Best regards, > Oleh Kravchenko > > Senior Software Developer, CMS | skype: oleg_krava | Email: > oleg@kaa.org.ua <mailto:oleg@kaa.org.ua> > > >
By the way, may be "C0 00 0C" enable RF receiver? On 04.08.16 15:03, Oleh Kravchenko wrote: > I got this from tracing I2C bus of tuner. > > Windows driver send this to tuner before set frequency, bandwidth, etc.: > wC0 | 15 | C0 00 00 00 00 01 01 01 01 01 01 02 00 00 01 | ............... > > ; I cut firmware from here, by the way Windows driver use firmware v2.1.8 > wC0 | 2 | 01 01 | .. > > ; I don't known what is it, but with(out) it on Linux my tuner work fine! > ; I think this is calibration data(?) > wC0 | 6 | 14 00 10 06 E8 03 | ...... > wC0 | 6 | 14 00 11 06 00 00 | ...... > wC0 | 6 | 14 00 23 06 9E 80 | ..#... > wC0 | 6 | 14 00 24 06 00 00 | ..$... > wC0 | 6 | 14 00 03 06 08 00 | ...... > wC0 | 6 | 14 00 07 06 32 C8 | ....2. > wC0 | 6 | 14 00 01 06 01 00 | ...... > wC0 | 6 | 14 00 13 06 00 03 | ...... > wC0 | 6 | 14 00 0C 06 88 13 | ...... > wC0 | 6 | 14 00 0D 06 94 64 | .....d > wC0 | 6 | 14 00 17 06 00 00 | ...... > wC0 | 6 | 14 00 12 06 00 00 | ...... > wC0 | 6 | 14 00 05 06 BA 00 | ...... > wC0 | 6 | 14 00 04 06 00 02 | ...... > wC0 | 6 | 14 00 16 06 00 00 | ...... > wC0 | 6 | 14 00 02 04 08 00 | ...... > wC0 | 6 | 14 00 01 04 00 00 | ...... > wC0 | 6 | 14 00 11 07 00 00 | ...... > wC0 | 6 | 14 00 08 07 00 00 | ...... > wC0 | 6 | 14 00 02 07 01 00 | ...... > wC0 | 6 | 14 00 05 07 32 C8 | ....2. > wC0 | 6 | 14 00 0C 07 01 00 | ...... > wC0 | 6 | 14 00 01 07 01 00 | ...... > wC0 | 6 | 14 00 0D 07 00 00 | ...... > wC0 | 6 | 14 00 0E 07 00 00 | ...... > wC0 | 6 | 14 00 10 07 00 00 | ...... > wC0 | 6 | 14 00 0A 07 00 01 | ...... > wC0 | 6 | 14 00 06 07 88 13 | ...... > wC0 | 6 | 14 00 07 07 94 1B | ...... > wC0 | 6 | 14 00 03 07 28 00 | ....(. > wC0 | 6 | 14 00 13 07 FF FF | ...... > wC0 | 6 | 14 00 0F 07 00 00 | ...... > wC0 | 6 | 14 00 09 07 00 00 | ...... > wC0 | 6 | 14 00 04 07 B0 00 | ...... > wC0 | 6 | 14 00 12 07 10 00 | ...... > wC0 | 6 | 14 00 04 05 00 80 | ...... > wC0 | 6 | 14 00 01 05 01 00 | ...... > wC0 | 6 | 14 00 05 05 00 07 | ...... > wC0 | 6 | 14 00 06 05 01 00 | ...... > wC0 | 6 | 14 00 07 05 7F 00 | ...... > > ; without C0 00 0C tuner is not work > wC0 | 3 | C0 00 0C | ... > > > > On 04.08.16 14:11, Olli Salonen wrote: >> Hi Oleh, >> >> It would seem to me that when you start the clocks here: >> >>> "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); >> You've removed 0c from third octet compared to the default behaviour. >> However, then later in the sequence you run: >> >>> + /* start tuner? */ >>> + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) { >>> + memcpy(cmd.args, "\xC0\x00\x0C", 3); >> Ie. there you do change the parameter in the third octet to 0c. I'm >> wondering what's the reason and significance of that. Was there a >> problem that you solved with this approach? Why is this way better >> than the previous way? I'm trying to understand that. >> >> Cheers, >> -olli >> >> >> >> On 4 August 2016 at 13:26, Oleh Kravchenko <oleg@kaa.org.ua >> <mailto:oleg@kaa.org.ua>> wrote: >> >> Hi Olli, >> >> Looks like I miss something, what parameter do you mean? >> >> On 04.08.16 13:08, Olli Salonen wrote: >> > Hi Oleh, >> > >> > Do you have any idea of what this parameter change does? I have >> a gut >> > feeling that this is an option that's not Si2158-specific, but a >> > parameter that's valid for the other tuners as well. >> > >> > Do you know what this parameter will actually do? If so, it would be >> > better to add this as a configuration option for the Si2157. Your >> > patch will now change the behaviour even for devices that you >> probably >> > have not tested. >> > >> > Cheers, >> > -olli >> > >> > On 4 August 2016 at 10:54, Oleh Kravchenko <oleg@kaa.org.ua >> <mailto:oleg@kaa.org.ua> >> > <mailto:oleg@kaa.org.ua <mailto:oleg@kaa.org.ua>>> wrote: >> > >> > Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua >> <mailto:oleg@kaa.org.ua> >> > <mailto:oleg@kaa.org.ua <mailto:oleg@kaa.org.ua>>> >> > --- >> > drivers/media/tuners/si2157.c | 34 >> > +++++++++++++++++++++++++++------- >> > drivers/media/tuners/si2157_priv.h | 1 + >> > 2 files changed, 28 insertions(+), 7 deletions(-) >> > >> > diff --git a/drivers/media/tuners/si2157.c >> > b/drivers/media/tuners/si2157.c >> > index 57b2508..d7035a5 100644 >> > --- a/drivers/media/tuners/si2157.c >> > +++ b/drivers/media/tuners/si2157.c >> > @@ -103,12 +103,21 @@ static int si2157_init(struct >> dvb_frontend *fe) >> > goto warm; >> > >> > /* power up */ >> > - if (dev->chiptype == SI2157_CHIPTYPE_SI2146) { >> > - memcpy(cmd.args, >> > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); >> > - cmd.wlen = 9; >> > - } else { >> > - memcpy(cmd.args, >> > >> "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); >> > - cmd.wlen = 15; >> > + switch (dev->chiptype) { >> > + case SI2157_CHIPTYPE_SI2146: >> > + memcpy(cmd.args, >> > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); >> > + cmd.wlen = 9; >> > + break; >> > + >> > + case SI2157_CHIPTYPE_SI2158: >> > + memcpy(cmd.args, >> > >> "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); >> > + cmd.wlen = 15; >> > + break; >> > + >> > + default: >> > + memcpy(cmd.args, >> > >> "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); >> > + cmd.wlen = 15; >> > + break; >> > } >> > cmd.rlen = 1; >> > ret = si2157_cmd_execute(client, &cmd); >> > @@ -204,6 +213,16 @@ skip_fw_download: >> > if (ret) >> > goto err; >> > >> > + /* start tuner? */ >> > + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) { >> > + memcpy(cmd.args, "\xC0\x00\x0C", 3); >> > + cmd.wlen = 3; >> > + cmd.rlen = 1; >> > + ret = si2157_cmd_execute(client, &cmd); >> > + if (ret) >> > + goto err; >> > + } >> > + >> > /* query firmware version */ >> > memcpy(cmd.args, "\x11", 1); >> > cmd.wlen = 1; >> > @@ -506,8 +525,9 @@ static int si2157_remove(struct i2c_client >> > *client) >> > } >> > >> > static const struct i2c_device_id si2157_id_table[] = { >> > - {"si2157", SI2157_CHIPTYPE_SI2157}, >> > {"si2146", SI2157_CHIPTYPE_SI2146}, >> > + {"si2157", SI2157_CHIPTYPE_SI2157}, >> > + {"si2158", SI2157_CHIPTYPE_SI2158}, >> > {} >> > }; >> > MODULE_DEVICE_TABLE(i2c, si2157_id_table); >> > diff --git a/drivers/media/tuners/si2157_priv.h >> > b/drivers/media/tuners/si2157_priv.h >> > index d6b2c7b..677fa00 100644 >> > --- a/drivers/media/tuners/si2157_priv.h >> > +++ b/drivers/media/tuners/si2157_priv.h >> > @@ -42,6 +42,7 @@ struct si2157_dev { >> > >> > #define SI2157_CHIPTYPE_SI2157 0 >> > #define SI2157_CHIPTYPE_SI2146 1 >> > +#define SI2157_CHIPTYPE_SI2158 2 >> > >> > /* firmware command struct */ >> > #define SI2157_ARGLEN 30 >> > -- >> > 2.7.3 >> > >> > -- >> > To unsubscribe from this list: send the line "unsubscribe >> > linux-media" in >> > the body of a message to majordomo@vger.kernel.org >> <mailto:majordomo@vger.kernel.org> >> > <mailto:majordomo@vger.kernel.org >> <mailto:majordomo@vger.kernel.org>> >> > More majordomo info at >> http://vger.kernel.org/majordomo-info.html >> > >> > >> >> -- >> Best regards, >> Oleh Kravchenko >> >> Senior Software Developer, CMS | skype: oleg_krava | Email: >> oleg@kaa.org.ua <mailto:oleg@kaa.org.ua> >> >> >>
Em Thu, 4 Aug 2016 10:54:02 +0300 Oleh Kravchenko <oleg@kaa.org.ua> escreveu: > Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> What's the status of this patch? Is it still valid? If so, please re-send with a proper description. e. g. what is it improving? why? how? Regards, Mauro > --- > drivers/media/tuners/si2157.c | 34 +++++++++++++++++++++++++++------- > drivers/media/tuners/si2157_priv.h | 1 + > 2 files changed, 28 insertions(+), 7 deletions(-) > > diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c > index 57b2508..d7035a5 100644 > --- a/drivers/media/tuners/si2157.c > +++ b/drivers/media/tuners/si2157.c > @@ -103,12 +103,21 @@ static int si2157_init(struct dvb_frontend *fe) > goto warm; > > /* power up */ > - if (dev->chiptype == SI2157_CHIPTYPE_SI2146) { > - memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); > - cmd.wlen = 9; > - } else { > - memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > - cmd.wlen = 15; > + switch (dev->chiptype) { > + case SI2157_CHIPTYPE_SI2146: > + memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); > + cmd.wlen = 9; > + break; > + > + case SI2157_CHIPTYPE_SI2158: > + memcpy(cmd.args, "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > + cmd.wlen = 15; > + break; > + > + default: > + memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); > + cmd.wlen = 15; > + break; > } > cmd.rlen = 1; > ret = si2157_cmd_execute(client, &cmd); > @@ -204,6 +213,16 @@ skip_fw_download: > if (ret) > goto err; > > + /* start tuner? */ > + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) { > + memcpy(cmd.args, "\xC0\x00\x0C", 3); > + cmd.wlen = 3; > + cmd.rlen = 1; > + ret = si2157_cmd_execute(client, &cmd); > + if (ret) > + goto err; > + } > + > /* query firmware version */ > memcpy(cmd.args, "\x11", 1); > cmd.wlen = 1; > @@ -506,8 +525,9 @@ static int si2157_remove(struct i2c_client *client) > } > > static const struct i2c_device_id si2157_id_table[] = { > - {"si2157", SI2157_CHIPTYPE_SI2157}, > {"si2146", SI2157_CHIPTYPE_SI2146}, > + {"si2157", SI2157_CHIPTYPE_SI2157}, > + {"si2158", SI2157_CHIPTYPE_SI2158}, > {} > }; > MODULE_DEVICE_TABLE(i2c, si2157_id_table); > diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h > index d6b2c7b..677fa00 100644 > --- a/drivers/media/tuners/si2157_priv.h > +++ b/drivers/media/tuners/si2157_priv.h > @@ -42,6 +42,7 @@ struct si2157_dev { > > #define SI2157_CHIPTYPE_SI2157 0 > #define SI2157_CHIPTYPE_SI2146 1 > +#define SI2157_CHIPTYPE_SI2158 2 > > /* firmware command struct */ > #define SI2157_ARGLEN 30 Thanks, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c index 57b2508..d7035a5 100644 --- a/drivers/media/tuners/si2157.c +++ b/drivers/media/tuners/si2157.c @@ -103,12 +103,21 @@ static int si2157_init(struct dvb_frontend *fe) goto warm; /* power up */ - if (dev->chiptype == SI2157_CHIPTYPE_SI2146) { - memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); - cmd.wlen = 9; - } else { - memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); - cmd.wlen = 15; + switch (dev->chiptype) { + case SI2157_CHIPTYPE_SI2146: + memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); + cmd.wlen = 9; + break; + + case SI2157_CHIPTYPE_SI2158: + memcpy(cmd.args, "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); + cmd.wlen = 15; + break; + + default: + memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); + cmd.wlen = 15; + break; } cmd.rlen = 1; ret = si2157_cmd_execute(client, &cmd); @@ -204,6 +213,16 @@ skip_fw_download: if (ret) goto err; + /* start tuner? */ + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) { + memcpy(cmd.args, "\xC0\x00\x0C", 3); + cmd.wlen = 3; + cmd.rlen = 1; + ret = si2157_cmd_execute(client, &cmd); + if (ret) + goto err; + } + /* query firmware version */ memcpy(cmd.args, "\x11", 1); cmd.wlen = 1; @@ -506,8 +525,9 @@ static int si2157_remove(struct i2c_client *client) } static const struct i2c_device_id si2157_id_table[] = { - {"si2157", SI2157_CHIPTYPE_SI2157}, {"si2146", SI2157_CHIPTYPE_SI2146}, + {"si2157", SI2157_CHIPTYPE_SI2157}, + {"si2158", SI2157_CHIPTYPE_SI2158}, {} }; MODULE_DEVICE_TABLE(i2c, si2157_id_table); diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h index d6b2c7b..677fa00 100644 --- a/drivers/media/tuners/si2157_priv.h +++ b/drivers/media/tuners/si2157_priv.h @@ -42,6 +42,7 @@ struct si2157_dev { #define SI2157_CHIPTYPE_SI2157 0 #define SI2157_CHIPTYPE_SI2146 1 +#define SI2157_CHIPTYPE_SI2158 2 /* firmware command struct */ #define SI2157_ARGLEN 30
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> --- drivers/media/tuners/si2157.c | 34 +++++++++++++++++++++++++++------- drivers/media/tuners/si2157_priv.h | 1 + 2 files changed, 28 insertions(+), 7 deletions(-)