diff mbox

[3/4] add stih-cec driver into DT

Message ID 1473844924-13895-4-git-send-email-benjamin.gaignard@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Benjamin Gaignard Sept. 14, 2016, 9:22 a.m. UTC 
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
---
 arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Peter Griffin Sept. 14, 2016, 9:51 a.m. UTC | #1 
Hi Benjamin,

On Wed, 14 Sep 2016, Benjamin Gaignard wrote:

> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> ---
>  arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 18ed1ad..440c4bd 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -227,5 +227,17 @@
>  			clock-names = "bdisp";
>  			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
>  		};
> +
> +		sti-cec@094a087c {
> +			compatible = "st,stih-cec";
> +			reg = <0x94a087c 0x64>;
> +			clocks = <&clk_sysin>;
> +			clock-names = "cec-clk";
> +			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
> +			interrupt-names = "cec-irq";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_cec0_default>;
> +			resets = <&softreset STIH407_LPM_SOFTRESET>;
> +		};

I think this should be put in stih407-family.dtsi.

regards,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 18ed1ad..440c4bd 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -227,5 +227,17 @@ 
 			clock-names = "bdisp";
 			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
 		};
+
+		sti-cec@094a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+		};
 	};
 };