@@ -137,6 +137,7 @@ struct serial_ir {
ktime_t lastkt;
struct rc_dev *rcdev;
struct platform_device *pdev;
+ struct timer_list timeout_timer;
unsigned int freq;
unsigned int duty_cycle;
@@ -395,9 +396,14 @@ static irqreturn_t serial_ir_irq_handler(int i, void *blah)
frbwrite(data, !(dcd ^ sense));
serial_ir.lastkt = kt;
last_dcd = dcd;
- ir_raw_event_handle(serial_ir.rcdev);
}
} while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */
+
+ mod_timer(&serial_ir.timeout_timer,
+ jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
+
+ ir_raw_event_handle(serial_ir.rcdev);
+
return IRQ_HANDLED;
}
@@ -471,6 +477,16 @@ static int hardware_init_port(void)
return 0;
}
+static void serial_ir_timeout(unsigned long arg)
+{
+ DEFINE_IR_RAW_EVENT(ev);
+
+ ev.timeout = true;
+ ev.duration = serial_ir.rcdev->timeout;
+ ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+ ir_raw_event_handle(serial_ir.rcdev);
+}
+
static int serial_ir_probe(struct platform_device *dev)
{
int i, nlow, nhigh, result;
@@ -500,6 +516,9 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = hardware_init_port();
if (result < 0)
return result;
@@ -781,7 +800,9 @@ static int __init serial_ir_init_module(void)
rcdev->allowed_protocols = RC_BIT_ALL;
rcdev->driver_name = KBUILD_MODNAME;
rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
rcdev->rx_resolution = 250000;
serial_ir.rcdev = rcdev;
@@ -797,6 +818,7 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
+ del_timer_sync(&serial_ir.timeout_timer);
rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
No timeout is generated by serial_ir since the port only generates interrupts on edges. Some IR protocols like rc6 and rc5 need a trailing space or timeout so they know there are no more bits coming. Without it, the current key will only be reported once some more IR occurs. Signed-off-by: Sean Young <sean@mess.org> --- drivers/media/rc/serial_ir.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)