diff mbox

[v3,3/3] arm: sti: update sti-cec for HPD notifier support

Message ID 1487328412-8305-4-git-send-email-benjamin.gaignard@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Benjamin Gaignard Feb. 17, 2017, 10:46 a.m. UTC 
To use HPD notifier sti CEC driver needs to get phandle
of the hdmi device.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
CC: devicetree@vger.kernel.org

version 3:
- change hdmi phandle from "st,hdmi-handle" to "hdmi-handle"
---
 arch/arm/boot/dts/stih407-family.dtsi | 12 ------------
 arch/arm/boot/dts/stih410.dtsi        | 13 +++++++++++++
 2 files changed, 13 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c8b2944..592d235 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -756,18 +756,6 @@ 
 				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
 		};
 
-		cec: sti-cec@094a087c {
-			compatible = "st,stih-cec";
-			reg = <0x94a087c 0x64>;
-			clocks = <&clk_sysin>;
-			clock-names = "cec-clk";
-			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-			interrupt-names = "cec-irq";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cec0_default>;
-			resets = <&softreset STIH407_LPM_SOFTRESET>;
-		};
-
 		rng10: rng@08a89000 {
 			compatible      = "st,rng";
 			reg		= <0x08a89000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 281a124..71deb02 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -259,5 +259,18 @@ 
 			clocks = <&clk_sysin>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
 		};
+
+		sti-cec@094a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+			hdmi-handle = <&sti_hdmi>;
+		};
 	};
 };