| Message ID | 1515779808-21420-2-git-send-email-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Jan 12, 2018 at 06:56:47PM +0100, Jacopo Mondi wrote: > Describe newly introduced OF properties for ov7670 image sensor. > The driver supports two standard properties to configure synchronism > signals polarities and one custom property already supported as > platform data options by the driver to suppress pixel clock during > horizontal blanking. > > Re-phrase child nodes description while at there. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > Documentation/devicetree/bindings/media/i2c/ov7670.txt | 18 ++++++++++++++++-- > 1 file changed, 16 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ov7670.txt > index 826b656..7c89ea5 100644 > --- a/Documentation/devicetree/bindings/media/i2c/ov7670.txt > +++ b/Documentation/devicetree/bindings/media/i2c/ov7670.txt > @@ -9,14 +9,23 @@ Required Properties: > - clocks: reference to the xclk input clock. > - clock-names: should be "xclk". > > +Required Endpoint Properties: > +- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. > + Default is active high. > +- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. > + Default is active high. If the properties are required, you'll have no default value for them. Other than that, looks good to me. > + > Optional Properties: > - reset-gpios: reference to the GPIO connected to the resetb pin, if any. > Active is low. > - powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any. > Active is high. > +- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output > + signal during horizontal blankings. > > -The device node must contain one 'port' child node for its digital output > -video port, in accordance with the video interface bindings defined in > +The device node must contain one 'port' child node with one 'endpoint' child > +sub-node for its digital output video port, in accordance with the video > +interface bindings defined in: > Documentation/devicetree/bindings/media/video-interfaces.txt. > > Example: > @@ -34,8 +43,13 @@ Example: > assigned-clocks = <&pck0>; > assigned-clock-rates = <25000000>; > > + ov7670,pclk-hb-disable; > + > port { > ov7670_0: endpoint { > + hsync-active = <0>; > + vsync-active = <0>; > + > remote-endpoint = <&isi_0>; > }; > }; > -- > 2.7.4 >
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ov7670.txt index 826b656..7c89ea5 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov7670.txt +++ b/Documentation/devicetree/bindings/media/i2c/ov7670.txt @@ -9,14 +9,23 @@ Required Properties: - clocks: reference to the xclk input clock. - clock-names: should be "xclk". +Required Endpoint Properties: +- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. + Default is active high. +- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. + Default is active high. + Optional Properties: - reset-gpios: reference to the GPIO connected to the resetb pin, if any. Active is low. - powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any. Active is high. +- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output + signal during horizontal blankings. -The device node must contain one 'port' child node for its digital output -video port, in accordance with the video interface bindings defined in +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: Documentation/devicetree/bindings/media/video-interfaces.txt. Example: @@ -34,8 +43,13 @@ Example: assigned-clocks = <&pck0>; assigned-clock-rates = <25000000>; + ov7670,pclk-hb-disable; + port { ov7670_0: endpoint { + hsync-active = <0>; + vsync-active = <0>; + remote-endpoint = <&isi_0>; }; };
Describe newly introduced OF properties for ov7670 image sensor. The driver supports two standard properties to configure synchronism signals polarities and one custom property already supported as platform data options by the driver to suppress pixel clock during horizontal blanking. Re-phrase child nodes description while at there. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- Documentation/devicetree/bindings/media/i2c/ov7670.txt | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)