[10/13] media: ov772x: Re-organize in-code comments

Commit Message

Jacopo Mondi Feb. 27, 2018, 3:40 p.m. UTC

A lot of comments that would fit a single line were spread on two or
more lines. Also fix capitalization and punctuation where appropriate.

Signed-off-by: Jacopo Mondi <[e-mail]>
---
 drivers/media/i2c/ov772x.c | 32 ++++++++++----------------------
 1 file changed, 10 insertions(+), 22 deletions(-)

Patch

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index a418455..8849da1 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -910,17 +910,13 @@  static int ov772x_set_params(struct ov772x_priv *priv,
 	int ret;
 	u8  val;
 
-	/*
-	 * reset hardware
-	 */
+	/* Reset hardware. */
 	ov772x_reset(client);
 
-	/*
-	 * Edge Ctrl
-	 */
+	/* Edge Ctrl. */
 	if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) {
 		/*
-		 * Manual Edge Control Mode
+		 * Manual Edge Control Mode.
 		 *
 		 * Edge auto strength bit is set by default.
 		 * Remove it when manual mode.
@@ -944,9 +940,9 @@  static int ov772x_set_params(struct ov772x_priv *priv,
 
 	} else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) {
 		/*
-		 * Auto Edge Control Mode
+		 * Auto Edge Control Mode.
 		 *
-		 * set upper and lower limit
+		 * Set upper and lower limit.
 		 */
 		ret = ov772x_mask_set(client,
 				      EDGE_UPPER, OV772X_EDGE_UPPER_MASK,
@@ -961,7 +957,7 @@  static int ov772x_set_params(struct ov772x_priv *priv,
 			goto ov772x_set_fmt_error;
 	}
 
-	/* Format and window size */
+	/* Format and window size. */
 	ret = ov772x_write(client, HSTART, win->rect.left >> 2);
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
@@ -993,9 +989,7 @@  static int ov772x_set_params(struct ov772x_priv *priv,
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
 
-	/*
-	 * set DSP_CTRL3
-	 */
+	/* Set DSP_CTRL3. */
 	val = cfmt->dsp3;
 	if (val) {
 		ret = ov772x_mask_set(client,
@@ -1011,9 +1005,7 @@  static int ov772x_set_params(struct ov772x_priv *priv,
 			goto ov772x_set_fmt_error;
 	}
 
-	/*
-	 * set COM3
-	 */
+	/* Set COM3. */
 	val = cfmt->com3;
 	if (priv->info->flags & OV772X_FLAG_VFLIP)
 		val |= VFLIP_IMG;
@@ -1041,9 +1033,7 @@  static int ov772x_set_params(struct ov772x_priv *priv,
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
 
-	/*
-	 * set COM8
-	 */
+	/* Set COM8. */
 	if (priv->band_filter) {
 		ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
 		if (!ret)
@@ -1153,9 +1143,7 @@  static int ov772x_video_probe(struct ov772x_priv *priv)
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * check and show product ID and manufacturer ID
-	 */
+	/* Check and show product ID and manufacturer ID. */
 	pid = ov772x_read(client, PID);
 	ver = ov772x_read(client, VER);