@@ -581,6 +581,66 @@ static int dvbsky_mygica_t230c_attach(struct dvb_usb_adapter *adap)
return 0;
}
+static int dvbsky_mygica_t230c_v2_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvbsky_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct i2c_adapter *i2c_adapter;
+ struct i2c_client *client_demod, *client_tuner;
+ struct i2c_board_info info;
+ struct si2168_config si2168_config;
+ struct si2157_config si2157_config;
+
+ /* attach demod */
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &i2c_adapter;
+ si2168_config.fe = &adap->fe[0];
+ si2168_config.ts_mode = SI2168_TS_PARALLEL;
+ si2168_config.ts_clock_inv = 1;
+ si2168_config.ts_clock_mode = SI2168_TS_CLOCK_MODE_MANUAL;
+ si2168_config.ts_clock_freq = 10000000;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2168", sizeof(info.type));
+ info.addr = 0x64;
+ info.platform_data = &si2168_config;
+
+ request_module("si2168");
+ client_demod = i2c_new_device(&d->i2c_adap, &info);
+ if (!client_demod || !client_demod->dev.driver)
+ goto fail_demod_device;
+ if (!try_module_get(client_demod->dev.driver->owner))
+ goto fail_demod_module;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = adap->fe[0];
+ si2157_config.if_port = 0;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2141", sizeof(info.type));
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+
+ request_module("si2157");
+ client_tuner = i2c_new_device(i2c_adapter, &info);
+ if (!client_tuner || !client_tuner->dev.driver)
+ goto fail_tuner_device;
+ if (!try_module_get(client_tuner->dev.driver->owner))
+ goto fail_tuner_module;
+
+ state->i2c_client_demod = client_demod;
+ state->i2c_client_tuner = client_tuner;
+ return 0;
+
+fail_tuner_module:
+ i2c_unregister_device(client_tuner);
+fail_tuner_device:
+ module_put(client_demod->dev.driver->owner);
+fail_demod_module:
+ i2c_unregister_device(client_demod);
+fail_demod_device:
+ return -ENODEV;
+}
+
static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
{
@@ -758,6 +818,33 @@ static struct dvb_usb_device_properties mygica_t230c_props = {
}
};
+static struct dvb_usb_device_properties mygica_t230c_v2_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct dvbsky_state),
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
+
+ .i2c_algo = &dvbsky_i2c_algo,
+ .frontend_attach = dvbsky_mygica_t230c_v2_attach,
+ .init = dvbsky_init,
+ .get_rc_config = dvbsky_get_rc_config,
+ .streaming_ctrl = dvbsky_streaming_ctrl,
+ .identify_state = dvbsky_identify_state,
+ .exit = dvbsky_exit,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
+ }
+ }
+};
+
+
static const struct usb_device_id dvbsky_id_table[] = {
{ DVB_USB_DEVICE(0x0572, 0x6831,
&dvbsky_s960_props, "DVBSky S960/S860", RC_MAP_DVBSKY) },
@@ -793,6 +880,9 @@ static const struct usb_device_id dvbsky_id_table[] = {
{ DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230C,
&mygica_t230c_props, "MyGica Mini DVB-T2 USB Stick T230C",
RC_MAP_TOTAL_MEDIA_IN_HAND_02) },
+ { DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230C_V2,
+ &mygica_t230c_v2_props, "MyGica Mini DVB-T2 USB Stick T230C v2",
+ RC_MAP_TOTAL_MEDIA_IN_HAND_02) },
{ }
};
MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
@@ -387,6 +387,7 @@
#define USB_PID_MYGICA_D689 0xd811
#define USB_PID_MYGICA_T230 0xc688
#define USB_PID_MYGICA_T230C 0xc689
+#define USB_PID_MYGICA_T230C_V2 0xc68a
#define USB_PID_ELGATO_EYETV_DIVERSITY 0x0011
#define USB_PID_ELGATO_EYETV_DTT 0x0021
#define USB_PID_ELGATO_EYETV_DTT_2 0x003f
Support for newer revisions of the MyGica T230C, shipping with a different USB pid. Although sometimes referred to as T230C2, the device is sold under its original name T230C. Besides a slightly different PCB layout and some different minor components, it utilizes the same bridge, demodulator and tuner as the older revision. However, it requires a fixed TS clock frequency of 10 MHz to tune to some muxes. Tested with various DVB-T2 HEVC and DVB-C channels. Signed-off-by: Thomas Hollstegge <thomas.hollstegge@gmail.com> Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> --- drivers/media/usb/dvb-usb-v2/dvbsky.c | 90 +++++++++++++++++++++++++++++++++++ include/media/dvb-usb-ids.h | 1 + 2 files changed, 91 insertions(+)