@@ -597,6 +597,58 @@ static inline struct stimx274 *to_imx274(struct v4l2_subdev *sd)
}
/*
+ * Fill consecutive reg_8 items in order to set a multibyte register.
+ *
+ * The sensor has many 2-bytes registers and a 3-byte register. This
+ * simplifies code to set them by filling consecutive entries of a
+ * struct reg_8 table with the data to set a register.
+ *
+ * The number of table entries that is filled is the minimum needed
+ * for the given number of bits (i.e. nbits / 8, rounded up). If nbits
+ * is not a multiple of 8, extra bits in the most significant byte are
+ * zeroed.
+ *
+ * Example:
+ * Calling prepare_reg(®s[10], 0x3000, 0xcafe, 12) will set:
+ * regs[10] = { .addr = 0x3000, .val = 0xfe }
+ * regs[11] = { .addr = 0x3001, .val = 0x0a }
+ *
+ * @table_base: Pointer to the first reg_8 struct to be filled. The
+ * following entries will also be set, make sure they are
+ * properly allocated!
+ * @addr_lsb: Address of the LSB register. Other registers must be
+ * consecutive, least-to-most significant.
+ * @value: Value to be written to the register.
+ * @nbits: Number of bits to write (range: [1..24])
+ */
+static void prepare_reg(struct reg_8 *table_base,
+ u16 addr_lsb,
+ u32 value,
+ size_t nbits)
+{
+ struct reg_8 *cmd = table_base;
+ u16 addr = addr_lsb;
+ size_t bits; /* how many bits at this round */
+
+ WARN_ON(nbits > 24);
+
+ if (nbits > 24)
+ nbits = 24;
+
+ while (nbits > 0) {
+ bits = min_t(size_t, 8, nbits);
+
+ cmd->addr = addr;
+ cmd->val = value & ((1 << bits) - 1);
+
+ nbits -= bits;
+ value >>= 8;
+ addr++;
+ cmd++;
+ }
+}
+
+/*
* Writing a register table
*
* @priv: Pointer to device
@@ -1163,15 +1215,6 @@ static int imx274_set_digital_gain(struct stimx274 *priv, u32 dgain)
reg_val & IMX274_MASK_LSB_4_BITS);
}
-static inline void imx274_calculate_gain_regs(struct reg_8 regs[2], u16 gain)
-{
- regs->addr = IMX274_ANALOG_GAIN_ADDR_MSB;
- regs->val = (gain >> IMX274_SHIFT_8_BITS) & IMX274_MASK_LSB_3_BITS;
-
- (regs + 1)->addr = IMX274_ANALOG_GAIN_ADDR_LSB;
- (regs + 1)->val = (gain) & IMX274_MASK_LSB_8_BITS;
-}
-
/*
* imx274_set_gain - Function called when setting gain
* @priv: Pointer to device structure
@@ -1229,7 +1272,7 @@ static int imx274_set_gain(struct stimx274 *priv, struct v4l2_ctrl *ctrl)
if (gain_reg > IMX274_GAIN_REG_MAX)
gain_reg = IMX274_GAIN_REG_MAX;
- imx274_calculate_gain_regs(reg_list, (u16)gain_reg);
+ prepare_reg(reg_list, IMX274_ANALOG_GAIN_ADDR_LSB, gain_reg, 11);
for (i = 0; i < ARRAY_SIZE(reg_list); i++) {
err = imx274_write_reg(priv, reg_list[i].addr,
@@ -1258,16 +1301,6 @@ static int imx274_set_gain(struct stimx274 *priv, struct v4l2_ctrl *ctrl)
return err;
}
-static inline void imx274_calculate_coarse_time_regs(struct reg_8 regs[2],
- u32 coarse_time)
-{
- regs->addr = IMX274_SHR_REG_MSB;
- regs->val = (coarse_time >> IMX274_SHIFT_8_BITS)
- & IMX274_MASK_LSB_8_BITS;
- (regs + 1)->addr = IMX274_SHR_REG_LSB;
- (regs + 1)->val = (coarse_time) & IMX274_MASK_LSB_8_BITS;
-}
-
/*
* imx274_set_coarse_time - Function called when setting SHR value
* @priv: Pointer to device structure
@@ -1292,7 +1325,7 @@ static int imx274_set_coarse_time(struct stimx274 *priv, u32 *val)
goto fail;
/* prepare SHR registers */
- imx274_calculate_coarse_time_regs(reg_list, coarse_time);
+ prepare_reg(reg_list, IMX274_SHR_REG_LSB, coarse_time, 16);
/* write to SHR registers */
for (i = 0; i < ARRAY_SIZE(reg_list); i++) {
@@ -1429,19 +1462,6 @@ static int imx274_set_test_pattern(struct stimx274 *priv, int val)
return err;
}
-static inline void imx274_calculate_frame_length_regs(struct reg_8 regs[3],
- u32 frame_length)
-{
- regs->addr = IMX274_VMAX_REG_1;
- regs->val = (frame_length >> IMX274_SHIFT_16_BITS)
- & IMX274_MASK_LSB_4_BITS;
- (regs + 1)->addr = IMX274_VMAX_REG_2;
- (regs + 1)->val = (frame_length >> IMX274_SHIFT_8_BITS)
- & IMX274_MASK_LSB_8_BITS;
- (regs + 2)->addr = IMX274_VMAX_REG_3;
- (regs + 2)->val = (frame_length) & IMX274_MASK_LSB_8_BITS;
-}
-
/*
* imx274_set_frame_length - Function called when setting frame length
* @priv: Pointer to device structure
@@ -1463,7 +1483,7 @@ static int imx274_set_frame_length(struct stimx274 *priv, u32 val)
frame_length = (u32)val;
- imx274_calculate_frame_length_regs(reg_list, frame_length);
+ prepare_reg(reg_list, IMX274_VMAX_REG_3, frame_length, 20);
for (i = 0; i < ARRAY_SIZE(reg_list); i++) {
err = imx274_write_reg(priv, reg_list[i].addr,
reg_list[i].val);
Tables of struct reg_8 are used to simplify multi-byte register assignment. However filling these snippets with values computed at runtime is currently implemented by very similar functions doing the needed shift & mask manipulation. Replace all those functions with a unique helper function to fill reg_8 tables in a simple and clean way. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> --- Changed v2 -> v3: - minor reformatting in prepare_reg() documentation Changed v1 -> v2: - add "media: " prefix to commit message --- drivers/media/i2c/imx274.c | 90 ++++++++++++++++++++++++++++------------------ 1 file changed, 55 insertions(+), 35 deletions(-)