diff mbox

[1/5] media: i2c: Copy rj54n1cb0c soc_camera sensor driver

Message ID 1527525431-22852-2-git-send-email-jacopo+renesas@jmondi.org (mailing list archive)
State New, archived
Headers show

Commit Message

Jacopo Mondi May 28, 2018, 4:37 p.m. UTC
Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.
No modification to KConfig and Makefile as soc_camera framework
dependencies need to be removed first in next commit.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/rj54n1cb0c.c | 1416 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1416 insertions(+)
 create mode 100644 drivers/media/i2c/rj54n1cb0c.c
diff mbox

Patch

diff --git a/drivers/media/i2c/rj54n1cb0c.c b/drivers/media/i2c/rj54n1cb0c.c
new file mode 100644
index 0000000..02398d0
--- /dev/null
+++ b/drivers/media/i2c/rj54n1cb0c.c
@@ -0,0 +1,1416 @@ 
+/*
+ * Driver for RJ54N1CB0C CMOS Image Sensor from Sharp
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/videodev2.h>
+#include <linux/module.h>
+
+#include <media/i2c/rj54n1cb0c.h>
+#include <media/soc_camera.h>
+#include <media/v4l2-clk.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+
+#define RJ54N1_DEV_CODE			0x0400
+#define RJ54N1_DEV_CODE2		0x0401
+#define RJ54N1_OUT_SEL			0x0403
+#define RJ54N1_XY_OUTPUT_SIZE_S_H	0x0404
+#define RJ54N1_X_OUTPUT_SIZE_S_L	0x0405
+#define RJ54N1_Y_OUTPUT_SIZE_S_L	0x0406
+#define RJ54N1_XY_OUTPUT_SIZE_P_H	0x0407
+#define RJ54N1_X_OUTPUT_SIZE_P_L	0x0408
+#define RJ54N1_Y_OUTPUT_SIZE_P_L	0x0409
+#define RJ54N1_LINE_LENGTH_PCK_S_H	0x040a
+#define RJ54N1_LINE_LENGTH_PCK_S_L	0x040b
+#define RJ54N1_LINE_LENGTH_PCK_P_H	0x040c
+#define RJ54N1_LINE_LENGTH_PCK_P_L	0x040d
+#define RJ54N1_RESIZE_N			0x040e
+#define RJ54N1_RESIZE_N_STEP		0x040f
+#define RJ54N1_RESIZE_STEP		0x0410
+#define RJ54N1_RESIZE_HOLD_H		0x0411
+#define RJ54N1_RESIZE_HOLD_L		0x0412
+#define RJ54N1_H_OBEN_OFS		0x0413
+#define RJ54N1_V_OBEN_OFS		0x0414
+#define RJ54N1_RESIZE_CONTROL		0x0415
+#define RJ54N1_STILL_CONTROL		0x0417
+#define RJ54N1_INC_USE_SEL_H		0x0425
+#define RJ54N1_INC_USE_SEL_L		0x0426
+#define RJ54N1_MIRROR_STILL_MODE	0x0427
+#define RJ54N1_INIT_START		0x0428
+#define RJ54N1_SCALE_1_2_LEV		0x0429
+#define RJ54N1_SCALE_4_LEV		0x042a
+#define RJ54N1_Y_GAIN			0x04d8
+#define RJ54N1_APT_GAIN_UP		0x04fa
+#define RJ54N1_RA_SEL_UL		0x0530
+#define RJ54N1_BYTE_SWAP		0x0531
+#define RJ54N1_OUT_SIGPO		0x053b
+#define RJ54N1_WB_SEL_WEIGHT_I		0x054e
+#define RJ54N1_BIT8_WB			0x0569
+#define RJ54N1_HCAPS_WB			0x056a
+#define RJ54N1_VCAPS_WB			0x056b
+#define RJ54N1_HCAPE_WB			0x056c
+#define RJ54N1_VCAPE_WB			0x056d
+#define RJ54N1_EXPOSURE_CONTROL		0x058c
+#define RJ54N1_FRAME_LENGTH_S_H		0x0595
+#define RJ54N1_FRAME_LENGTH_S_L		0x0596
+#define RJ54N1_FRAME_LENGTH_P_H		0x0597
+#define RJ54N1_FRAME_LENGTH_P_L		0x0598
+#define RJ54N1_PEAK_H			0x05b7
+#define RJ54N1_PEAK_50			0x05b8
+#define RJ54N1_PEAK_60			0x05b9
+#define RJ54N1_PEAK_DIFF		0x05ba
+#define RJ54N1_IOC			0x05ef
+#define RJ54N1_TG_BYPASS		0x0700
+#define RJ54N1_PLL_L			0x0701
+#define RJ54N1_PLL_N			0x0702
+#define RJ54N1_PLL_EN			0x0704
+#define RJ54N1_RATIO_TG			0x0706
+#define RJ54N1_RATIO_T			0x0707
+#define RJ54N1_RATIO_R			0x0708
+#define RJ54N1_RAMP_TGCLK_EN		0x0709
+#define RJ54N1_OCLK_DSP			0x0710
+#define RJ54N1_RATIO_OP			0x0711
+#define RJ54N1_RATIO_O			0x0712
+#define RJ54N1_OCLK_SEL_EN		0x0713
+#define RJ54N1_CLK_RST			0x0717
+#define RJ54N1_RESET_STANDBY		0x0718
+#define RJ54N1_FWFLG			0x07fe
+
+#define E_EXCLK				(1 << 7)
+#define SOFT_STDBY			(1 << 4)
+#define SEN_RSTX			(1 << 2)
+#define TG_RSTX				(1 << 1)
+#define DSP_RSTX			(1 << 0)
+
+#define RESIZE_HOLD_SEL			(1 << 2)
+#define RESIZE_GO			(1 << 1)
+
+/*
+ * When cropping, the camera automatically centers the cropped region, there
+ * doesn't seem to be a way to specify an explicit location of the rectangle.
+ */
+#define RJ54N1_COLUMN_SKIP		0
+#define RJ54N1_ROW_SKIP			0
+#define RJ54N1_MAX_WIDTH		1600
+#define RJ54N1_MAX_HEIGHT		1200
+
+#define PLL_L				2
+#define PLL_N				0x31
+
+/* I2C addresses: 0x50, 0x51, 0x60, 0x61 */
+
+/* RJ54N1CB0C has only one fixed colorspace per pixelcode */
+struct rj54n1_datafmt {
+	u32	code;
+	enum v4l2_colorspace		colorspace;
+};
+
+/* Find a data format by a pixel code in an array */
+static const struct rj54n1_datafmt *rj54n1_find_datafmt(
+	u32 code, const struct rj54n1_datafmt *fmt,
+	int n)
+{
+	int i;
+	for (i = 0; i < n; i++)
+		if (fmt[i].code == code)
+			return fmt + i;
+
+	return NULL;
+}
+
+static const struct rj54n1_datafmt rj54n1_colour_fmts[] = {
+	{MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG},
+	{MEDIA_BUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG},
+	{MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB},
+	{MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB},
+	{MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
+	{MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_LE, V4L2_COLORSPACE_SRGB},
+	{MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_BE, V4L2_COLORSPACE_SRGB},
+	{MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_BE, V4L2_COLORSPACE_SRGB},
+	{MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB},
+};
+
+struct rj54n1_clock_div {
+	u8 ratio_tg;	/* can be 0 or an odd number */
+	u8 ratio_t;
+	u8 ratio_r;
+	u8 ratio_op;
+	u8 ratio_o;
+};
+
+struct rj54n1 {
+	struct v4l2_subdev subdev;
+	struct v4l2_ctrl_handler hdl;
+	struct v4l2_clk *clk;
+	struct rj54n1_clock_div clk_div;
+	const struct rj54n1_datafmt *fmt;
+	struct v4l2_rect rect;	/* Sensor window */
+	unsigned int tgclk_mhz;
+	bool auto_wb;
+	unsigned short width;	/* Output window */
+	unsigned short height;
+	unsigned short resize;	/* Sensor * 1024 / resize = Output */
+	unsigned short scale;
+	u8 bank;
+};
+
+struct rj54n1_reg_val {
+	u16 reg;
+	u8 val;
+};
+
+static const struct rj54n1_reg_val bank_4[] = {
+	{0x417, 0},
+	{0x42c, 0},
+	{0x42d, 0xf0},
+	{0x42e, 0},
+	{0x42f, 0x50},
+	{0x430, 0xf5},
+	{0x431, 0x16},
+	{0x432, 0x20},
+	{0x433, 0},
+	{0x434, 0xc8},
+	{0x43c, 8},
+	{0x43e, 0x90},
+	{0x445, 0x83},
+	{0x4ba, 0x58},
+	{0x4bb, 4},
+	{0x4bc, 0x20},
+	{0x4db, 4},
+	{0x4fe, 2},
+};
+
+static const struct rj54n1_reg_val bank_5[] = {
+	{0x514, 0},
+	{0x516, 0},
+	{0x518, 0},
+	{0x51a, 0},
+	{0x51d, 0xff},
+	{0x56f, 0x28},
+	{0x575, 0x40},
+	{0x5bc, 0x48},
+	{0x5c1, 6},
+	{0x5e5, 0x11},
+	{0x5e6, 0x43},
+	{0x5e7, 0x33},
+	{0x5e8, 0x21},
+	{0x5e9, 0x30},
+	{0x5ea, 0x0},
+	{0x5eb, 0xa5},
+	{0x5ec, 0xff},
+	{0x5fe, 2},
+};
+
+static const struct rj54n1_reg_val bank_7[] = {
+	{0x70a, 0},
+	{0x714, 0xff},
+	{0x715, 0xff},
+	{0x716, 0x1f},
+	{0x7FE, 2},
+};
+
+static const struct rj54n1_reg_val bank_8[] = {
+	{0x800, 0x00},
+	{0x801, 0x01},
+	{0x802, 0x61},
+	{0x805, 0x00},
+	{0x806, 0x00},
+	{0x807, 0x00},
+	{0x808, 0x00},
+	{0x809, 0x01},
+	{0x80A, 0x61},
+	{0x80B, 0x00},
+	{0x80C, 0x01},
+	{0x80D, 0x00},
+	{0x80E, 0x00},
+	{0x80F, 0x00},
+	{0x810, 0x00},
+	{0x811, 0x01},
+	{0x812, 0x61},
+	{0x813, 0x00},
+	{0x814, 0x11},
+	{0x815, 0x00},
+	{0x816, 0x41},
+	{0x817, 0x00},
+	{0x818, 0x51},
+	{0x819, 0x01},
+	{0x81A, 0x1F},
+	{0x81B, 0x00},
+	{0x81C, 0x01},
+	{0x81D, 0x00},
+	{0x81E, 0x11},
+	{0x81F, 0x00},
+	{0x820, 0x41},
+	{0x821, 0x00},
+	{0x822, 0x51},
+	{0x823, 0x00},
+	{0x824, 0x00},
+	{0x825, 0x00},
+	{0x826, 0x47},
+	{0x827, 0x01},
+	{0x828, 0x4F},
+	{0x829, 0x00},
+	{0x82A, 0x00},
+	{0x82B, 0x00},
+	{0x82C, 0x30},
+	{0x82D, 0x00},
+	{0x82E, 0x40},
+	{0x82F, 0x00},
+	{0x830, 0xB3},
+	{0x831, 0x00},
+	{0x832, 0xE3},
+	{0x833, 0x00},
+	{0x834, 0x00},
+	{0x835, 0x00},
+	{0x836, 0x00},
+	{0x837, 0x00},
+	{0x838, 0x00},
+	{0x839, 0x01},
+	{0x83A, 0x61},
+	{0x83B, 0x00},
+	{0x83C, 0x01},
+	{0x83D, 0x00},
+	{0x83E, 0x00},
+	{0x83F, 0x00},
+	{0x840, 0x00},
+	{0x841, 0x01},
+	{0x842, 0x61},
+	{0x843, 0x00},
+	{0x844, 0x1D},
+	{0x845, 0x00},
+	{0x846, 0x00},
+	{0x847, 0x00},
+	{0x848, 0x00},
+	{0x849, 0x01},
+	{0x84A, 0x1F},
+	{0x84B, 0x00},
+	{0x84C, 0x05},
+	{0x84D, 0x00},
+	{0x84E, 0x19},
+	{0x84F, 0x01},
+	{0x850, 0x21},
+	{0x851, 0x01},
+	{0x852, 0x5D},
+	{0x853, 0x00},
+	{0x854, 0x00},
+	{0x855, 0x00},
+	{0x856, 0x19},
+	{0x857, 0x01},
+	{0x858, 0x21},
+	{0x859, 0x00},
+	{0x85A, 0x00},
+	{0x85B, 0x00},
+	{0x85C, 0x00},
+	{0x85D, 0x00},
+	{0x85E, 0x00},
+	{0x85F, 0x00},
+	{0x860, 0xB3},
+	{0x861, 0x00},
+	{0x862, 0xE3},
+	{0x863, 0x00},
+	{0x864, 0x00},
+	{0x865, 0x00},
+	{0x866, 0x00},
+	{0x867, 0x00},
+	{0x868, 0x00},
+	{0x869, 0xE2},
+	{0x86A, 0x00},
+	{0x86B, 0x01},
+	{0x86C, 0x06},
+	{0x86D, 0x00},
+	{0x86E, 0x00},
+	{0x86F, 0x00},
+	{0x870, 0x60},
+	{0x871, 0x8C},
+	{0x872, 0x10},
+	{0x873, 0x00},
+	{0x874, 0xE0},
+	{0x875, 0x00},
+	{0x876, 0x27},
+	{0x877, 0x01},
+	{0x878, 0x00},
+	{0x879, 0x00},
+	{0x87A, 0x00},
+	{0x87B, 0x03},
+	{0x87C, 0x00},
+	{0x87D, 0x00},
+	{0x87E, 0x00},
+	{0x87F, 0x00},
+	{0x880, 0x00},
+	{0x881, 0x00},
+	{0x882, 0x00},
+	{0x883, 0x00},
+	{0x884, 0x00},
+	{0x885, 0x00},
+	{0x886, 0xF8},
+	{0x887, 0x00},
+	{0x888, 0x03},
+	{0x889, 0x00},
+	{0x88A, 0x64},
+	{0x88B, 0x00},
+	{0x88C, 0x03},
+	{0x88D, 0x00},
+	{0x88E, 0xB1},
+	{0x88F, 0x00},
+	{0x890, 0x03},
+	{0x891, 0x01},
+	{0x892, 0x1D},
+	{0x893, 0x00},
+	{0x894, 0x03},
+	{0x895, 0x01},
+	{0x896, 0x4B},
+	{0x897, 0x00},
+	{0x898, 0xE5},
+	{0x899, 0x00},
+	{0x89A, 0x01},
+	{0x89B, 0x00},
+	{0x89C, 0x01},
+	{0x89D, 0x04},
+	{0x89E, 0xC8},
+	{0x89F, 0x00},
+	{0x8A0, 0x01},
+	{0x8A1, 0x01},
+	{0x8A2, 0x61},
+	{0x8A3, 0x00},
+	{0x8A4, 0x01},
+	{0x8A5, 0x00},
+	{0x8A6, 0x00},
+	{0x8A7, 0x00},
+	{0x8A8, 0x00},
+	{0x8A9, 0x00},
+	{0x8AA, 0x7F},
+	{0x8AB, 0x03},
+	{0x8AC, 0x00},
+	{0x8AD, 0x00},
+	{0x8AE, 0x00},
+	{0x8AF, 0x00},
+	{0x8B0, 0x00},
+	{0x8B1, 0x00},
+	{0x8B6, 0x00},
+	{0x8B7, 0x01},
+	{0x8B8, 0x00},
+	{0x8B9, 0x00},
+	{0x8BA, 0x02},
+	{0x8BB, 0x00},
+	{0x8BC, 0xFF},
+	{0x8BD, 0x00},
+	{0x8FE, 2},
+};
+
+static const struct rj54n1_reg_val bank_10[] = {
+	{0x10bf, 0x69}
+};
+
+/* Clock dividers - these are default register values, divider = register + 1 */
+static const struct rj54n1_clock_div clk_div = {
+	.ratio_tg	= 3 /* default: 5 */,
+	.ratio_t	= 4 /* default: 1 */,
+	.ratio_r	= 4 /* default: 0 */,
+	.ratio_op	= 1 /* default: 5 */,
+	.ratio_o	= 9 /* default: 0 */,
+};
+
+static struct rj54n1 *to_rj54n1(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct rj54n1, subdev);
+}
+
+static int reg_read(struct i2c_client *client, const u16 reg)
+{
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	int ret;
+
+	/* set bank */
+	if (rj54n1->bank != reg >> 8) {
+		dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8);
+		ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8);
+		if (ret < 0)
+			return ret;
+		rj54n1->bank = reg >> 8;
+	}
+	return i2c_smbus_read_byte_data(client, reg & 0xff);
+}
+
+static int reg_write(struct i2c_client *client, const u16 reg,
+		     const u8 data)
+{
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	int ret;
+
+	/* set bank */
+	if (rj54n1->bank != reg >> 8) {
+		dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8);
+		ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8);
+		if (ret < 0)
+			return ret;
+		rj54n1->bank = reg >> 8;
+	}
+	dev_dbg(&client->dev, "[0x%x] = 0x%x\n", reg & 0xff, data);
+	return i2c_smbus_write_byte_data(client, reg & 0xff, data);
+}
+
+static int reg_set(struct i2c_client *client, const u16 reg,
+		   const u8 data, const u8 mask)
+{
+	int ret;
+
+	ret = reg_read(client, reg);
+	if (ret < 0)
+		return ret;
+	return reg_write(client, reg, (ret & ~mask) | (data & mask));
+}
+
+static int reg_write_multiple(struct i2c_client *client,
+			      const struct rj54n1_reg_val *rv, const int n)
+{
+	int i, ret;
+
+	for (i = 0; i < n; i++) {
+		ret = reg_write(client, rv->reg, rv->val);
+		if (ret < 0)
+			return ret;
+		rv++;
+	}
+
+	return 0;
+}
+
+static int rj54n1_enum_mbus_code(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad || code->index >= ARRAY_SIZE(rj54n1_colour_fmts))
+		return -EINVAL;
+
+	code->code = rj54n1_colour_fmts[code->index].code;
+	return 0;
+}
+
+static int rj54n1_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	/* Switch between preview and still shot modes */
+	return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80);
+}
+
+static int rj54n1_set_rect(struct i2c_client *client,
+			   u16 reg_x, u16 reg_y, u16 reg_xy,
+			   u32 width, u32 height)
+{
+	int ret;
+
+	ret = reg_write(client, reg_xy,
+			((width >> 4) & 0x70) |
+			((height >> 8) & 7));
+
+	if (!ret)
+		ret = reg_write(client, reg_x, width & 0xff);
+	if (!ret)
+		ret = reg_write(client, reg_y, height & 0xff);
+
+	return ret;
+}
+
+/*
+ * Some commands, specifically certain initialisation sequences, require
+ * a commit operation.
+ */
+static int rj54n1_commit(struct i2c_client *client)
+{
+	int ret = reg_write(client, RJ54N1_INIT_START, 1);
+	msleep(10);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_INIT_START, 0);
+	return ret;
+}
+
+static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h,
+			       s32 *out_w, s32 *out_h);
+
+static int rj54n1_set_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_pad_config *cfg,
+				struct v4l2_subdev_selection *sel)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	const struct v4l2_rect *rect = &sel->r;
+	int dummy = 0, output_w, output_h,
+		input_w = rect->width, input_h = rect->height;
+	int ret;
+
+	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
+	    sel->target != V4L2_SEL_TGT_CROP)
+		return -EINVAL;
+
+	/* arbitrary minimum width and height, edges unimportant */
+	soc_camera_limit_side(&dummy, &input_w,
+		     RJ54N1_COLUMN_SKIP, 8, RJ54N1_MAX_WIDTH);
+
+	soc_camera_limit_side(&dummy, &input_h,
+		     RJ54N1_ROW_SKIP, 8, RJ54N1_MAX_HEIGHT);
+
+	output_w = (input_w * 1024 + rj54n1->resize / 2) / rj54n1->resize;
+	output_h = (input_h * 1024 + rj54n1->resize / 2) / rj54n1->resize;
+
+	dev_dbg(&client->dev, "Scaling for %dx%d : %u = %dx%d\n",
+		input_w, input_h, rj54n1->resize, output_w, output_h);
+
+	ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h);
+	if (ret < 0)
+		return ret;
+
+	rj54n1->width		= output_w;
+	rj54n1->height		= output_h;
+	rj54n1->resize		= ret;
+	rj54n1->rect.width	= input_w;
+	rj54n1->rect.height	= input_h;
+
+	return 0;
+}
+
+static int rj54n1_get_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_pad_config *cfg,
+				struct v4l2_subdev_selection *sel)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+
+	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+		return -EINVAL;
+
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+		sel->r.left = RJ54N1_COLUMN_SKIP;
+		sel->r.top = RJ54N1_ROW_SKIP;
+		sel->r.width = RJ54N1_MAX_WIDTH;
+		sel->r.height = RJ54N1_MAX_HEIGHT;
+		return 0;
+	case V4L2_SEL_TGT_CROP:
+		sel->r = rj54n1->rect;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rj54n1_get_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mf = &format->format;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+
+	if (format->pad)
+		return -EINVAL;
+
+	mf->code	= rj54n1->fmt->code;
+	mf->colorspace	= rj54n1->fmt->colorspace;
+	mf->field	= V4L2_FIELD_NONE;
+	mf->width	= rj54n1->width;
+	mf->height	= rj54n1->height;
+
+	return 0;
+}
+
+/*
+ * The actual geometry configuration routine. It scales the input window into
+ * the output one, updates the window sizes and returns an error or the resize
+ * coefficient on success. Note: we only use the "Fixed Scaling" on this camera.
+ */
+static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h,
+			       s32 *out_w, s32 *out_h)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	unsigned int skip, resize, input_w = *in_w, input_h = *in_h,
+		output_w = *out_w, output_h = *out_h;
+	u16 inc_sel, wb_bit8, wb_left, wb_right, wb_top, wb_bottom;
+	unsigned int peak, peak_50, peak_60;
+	int ret;
+
+	/*
+	 * We have a problem with crops, where the window is larger than 512x384
+	 * and output window is larger than a half of the input one. In this
+	 * case we have to either reduce the input window to equal or below
+	 * 512x384 or the output window to equal or below 1/2 of the input.
+	 */
+	if (output_w > max(512U, input_w / 2)) {
+		if (2 * output_w > RJ54N1_MAX_WIDTH) {
+			input_w = RJ54N1_MAX_WIDTH;
+			output_w = RJ54N1_MAX_WIDTH / 2;
+		} else {
+			input_w = output_w * 2;
+		}
+
+		dev_dbg(&client->dev, "Adjusted output width: in %u, out %u\n",
+			input_w, output_w);
+	}
+
+	if (output_h > max(384U, input_h / 2)) {
+		if (2 * output_h > RJ54N1_MAX_HEIGHT) {
+			input_h = RJ54N1_MAX_HEIGHT;
+			output_h = RJ54N1_MAX_HEIGHT / 2;
+		} else {
+			input_h = output_h * 2;
+		}
+
+		dev_dbg(&client->dev, "Adjusted output height: in %u, out %u\n",
+			input_h, output_h);
+	}
+
+	/* Idea: use the read mode for snapshots, handle separate geometries */
+	ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_S_L,
+			      RJ54N1_Y_OUTPUT_SIZE_S_L,
+			      RJ54N1_XY_OUTPUT_SIZE_S_H, output_w, output_h);
+	if (!ret)
+		ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_P_L,
+			      RJ54N1_Y_OUTPUT_SIZE_P_L,
+			      RJ54N1_XY_OUTPUT_SIZE_P_H, output_w, output_h);
+
+	if (ret < 0)
+		return ret;
+
+	if (output_w > input_w && output_h > input_h) {
+		input_w = output_w;
+		input_h = output_h;
+
+		resize = 1024;
+	} else {
+		unsigned int resize_x, resize_y;
+		resize_x = (input_w * 1024 + output_w / 2) / output_w;
+		resize_y = (input_h * 1024 + output_h / 2) / output_h;
+
+		/* We want max(resize_x, resize_y), check if it still fits */
+		if (resize_x > resize_y &&
+		    (output_h * resize_x + 512) / 1024 > RJ54N1_MAX_HEIGHT)
+			resize = (RJ54N1_MAX_HEIGHT * 1024 + output_h / 2) /
+				output_h;
+		else if (resize_y > resize_x &&
+			 (output_w * resize_y + 512) / 1024 > RJ54N1_MAX_WIDTH)
+			resize = (RJ54N1_MAX_WIDTH * 1024 + output_w / 2) /
+				output_w;
+		else
+			resize = max(resize_x, resize_y);
+
+		/* Prohibited value ranges */
+		switch (resize) {
+		case 2040 ... 2047:
+			resize = 2039;
+			break;
+		case 4080 ... 4095:
+			resize = 4079;
+			break;
+		case 8160 ... 8191:
+			resize = 8159;
+			break;
+		case 16320 ... 16384:
+			resize = 16319;
+		}
+	}
+
+	/* Set scaling */
+	ret = reg_write(client, RJ54N1_RESIZE_HOLD_L, resize & 0xff);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RESIZE_HOLD_H, resize >> 8);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Configure a skipping bitmask. The sensor will select a skipping value
+	 * among set bits automatically. This is very unclear in the datasheet
+	 * too. I was told, in this register one enables all skipping values,
+	 * that are required for a specific resize, and the camera selects
+	 * automatically, which ones to use. But it is unclear how to identify,
+	 * which cropping values are needed. Secondly, why don't we just set all
+	 * bits and let the camera choose? Would it increase processing time and
+	 * reduce the framerate? Using 0xfffc for INC_USE_SEL doesn't seem to
+	 * improve the image quality or stability for larger frames (see comment
+	 * above), but I didn't check the framerate.
+	 */
+	skip = min(resize / 1024, 15U);
+
+	inc_sel = 1 << skip;
+
+	if (inc_sel <= 2)
+		inc_sel = 0xc;
+	else if (resize & 1023 && skip < 15)
+		inc_sel |= 1 << (skip + 1);
+
+	ret = reg_write(client, RJ54N1_INC_USE_SEL_L, inc_sel & 0xfc);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_INC_USE_SEL_H, inc_sel >> 8);
+
+	if (!rj54n1->auto_wb) {
+		/* Auto white balance window */
+		wb_left	  = output_w / 16;
+		wb_right  = (3 * output_w / 4 - 3) / 4;
+		wb_top	  = output_h / 16;
+		wb_bottom = (3 * output_h / 4 - 3) / 4;
+		wb_bit8	  = ((wb_left >> 2) & 0x40) | ((wb_top >> 4) & 0x10) |
+			((wb_right >> 6) & 4) | ((wb_bottom >> 8) & 1);
+
+		if (!ret)
+			ret = reg_write(client, RJ54N1_BIT8_WB, wb_bit8);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_HCAPS_WB, wb_left);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_VCAPS_WB, wb_top);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_HCAPE_WB, wb_right);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_VCAPE_WB, wb_bottom);
+	}
+
+	/* Antiflicker */
+	peak = 12 * RJ54N1_MAX_WIDTH * (1 << 14) * resize / rj54n1->tgclk_mhz /
+		10000;
+	peak_50 = peak / 6;
+	peak_60 = peak / 5;
+
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_H,
+				((peak_50 >> 4) & 0xf0) | (peak_60 >> 8));
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_50, peak_50);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_60, peak_60);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_DIFF, peak / 150);
+
+	/* Start resizing */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RESIZE_CONTROL,
+				RESIZE_HOLD_SEL | RESIZE_GO | 1);
+
+	if (ret < 0)
+		return ret;
+
+	/* Constant taken from manufacturer's example */
+	msleep(230);
+
+	ret = reg_write(client, RJ54N1_RESIZE_CONTROL, RESIZE_HOLD_SEL | 1);
+	if (ret < 0)
+		return ret;
+
+	*in_w = (output_w * resize + 512) / 1024;
+	*in_h = (output_h * resize + 512) / 1024;
+	*out_w = output_w;
+	*out_h = output_h;
+
+	dev_dbg(&client->dev, "Scaled for %dx%d : %u = %ux%u, skip %u\n",
+		*in_w, *in_h, resize, output_w, output_h, skip);
+
+	return resize;
+}
+
+static int rj54n1_set_clock(struct i2c_client *client)
+{
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	int ret;
+
+	/* Enable external clock */
+	ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK | SOFT_STDBY);
+	/* Leave stand-by. Note: use this when implementing suspend / resume */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK);
+
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PLL_L, PLL_L);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PLL_N, PLL_N);
+
+	/* TGCLK dividers */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RATIO_TG,
+				rj54n1->clk_div.ratio_tg);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RATIO_T,
+				rj54n1->clk_div.ratio_t);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RATIO_R,
+				rj54n1->clk_div.ratio_r);
+
+	/* Enable TGCLK & RAMP */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RAMP_TGCLK_EN, 3);
+
+	/* Disable clock output */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_OCLK_DSP, 0);
+
+	/* Set divisors */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RATIO_OP,
+				rj54n1->clk_div.ratio_op);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RATIO_O,
+				rj54n1->clk_div.ratio_o);
+
+	/* Enable OCLK */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1);
+
+	/* Use PLL for Timing Generator, write 2 to reserved bits */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_TG_BYPASS, 2);
+
+	/* Take sensor out of reset */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RESET_STANDBY,
+				E_EXCLK | SEN_RSTX);
+	/* Enable PLL */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PLL_EN, 1);
+
+	/* Wait for PLL to stabilise */
+	msleep(10);
+
+	/* Enable clock to frequency divider */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_CLK_RST, 1);
+
+	if (!ret)
+		ret = reg_read(client, RJ54N1_CLK_RST);
+	if (ret != 1) {
+		dev_err(&client->dev,
+			"Resetting RJ54N1CB0C clock failed: %d!\n", ret);
+		return -EIO;
+	}
+
+	/* Start the PLL */
+	ret = reg_set(client, RJ54N1_OCLK_DSP, 1, 1);
+
+	/* Enable OCLK */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1);
+
+	return ret;
+}
+
+static int rj54n1_reg_init(struct i2c_client *client)
+{
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	int ret = rj54n1_set_clock(client);
+
+	if (!ret)
+		ret = reg_write_multiple(client, bank_7, ARRAY_SIZE(bank_7));
+	if (!ret)
+		ret = reg_write_multiple(client, bank_10, ARRAY_SIZE(bank_10));
+
+	/* Set binning divisors */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_SCALE_1_2_LEV, 3 | (7 << 4));
+	if (!ret)
+		ret = reg_write(client, RJ54N1_SCALE_4_LEV, 0xf);
+
+	/* Switch to fixed resize mode */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RESIZE_CONTROL,
+				RESIZE_HOLD_SEL | 1);
+
+	/* Set gain */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_Y_GAIN, 0x84);
+
+	/*
+	 * Mirror the image back: default is upside down and left-to-right...
+	 * Set manual preview / still shot switching
+	 */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_MIRROR_STILL_MODE, 0x27);
+
+	if (!ret)
+		ret = reg_write_multiple(client, bank_4, ARRAY_SIZE(bank_4));
+
+	/* Auto exposure area */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_EXPOSURE_CONTROL, 0x80);
+	/* Check current auto WB config */
+	if (!ret)
+		ret = reg_read(client, RJ54N1_WB_SEL_WEIGHT_I);
+	if (ret >= 0) {
+		rj54n1->auto_wb = ret & 0x80;
+		ret = reg_write_multiple(client, bank_5, ARRAY_SIZE(bank_5));
+	}
+	if (!ret)
+		ret = reg_write_multiple(client, bank_8, ARRAY_SIZE(bank_8));
+
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RESET_STANDBY,
+				E_EXCLK | DSP_RSTX | SEN_RSTX);
+
+	/* Commit init */
+	if (!ret)
+		ret = rj54n1_commit(client);
+
+	/* Take DSP, TG, sensor out of reset */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_RESET_STANDBY,
+				E_EXCLK | DSP_RSTX | TG_RSTX | SEN_RSTX);
+
+	/* Start register update? Same register as 0x?FE in many bank_* sets */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_FWFLG, 2);
+
+	/* Constant taken from manufacturer's example */
+	msleep(700);
+
+	return ret;
+}
+
+static int rj54n1_set_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mf = &format->format;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	const struct rj54n1_datafmt *fmt;
+	int output_w, output_h, max_w, max_h,
+		input_w = rj54n1->rect.width, input_h = rj54n1->rect.height;
+	int align = mf->code == MEDIA_BUS_FMT_SBGGR10_1X10 ||
+		mf->code == MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_BE ||
+		mf->code == MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_BE ||
+		mf->code == MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE ||
+		mf->code == MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_LE;
+	int ret;
+
+	if (format->pad)
+		return -EINVAL;
+
+	dev_dbg(&client->dev, "%s: code = %d, width = %u, height = %u\n",
+		__func__, mf->code, mf->width, mf->height);
+
+	fmt = rj54n1_find_datafmt(mf->code, rj54n1_colour_fmts,
+				  ARRAY_SIZE(rj54n1_colour_fmts));
+	if (!fmt) {
+		fmt = rj54n1->fmt;
+		mf->code = fmt->code;
+	}
+
+	mf->field	= V4L2_FIELD_NONE;
+	mf->colorspace	= fmt->colorspace;
+
+	v4l_bound_align_image(&mf->width, 112, RJ54N1_MAX_WIDTH, align,
+			      &mf->height, 84, RJ54N1_MAX_HEIGHT, align, 0);
+
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		cfg->try_fmt = *mf;
+		return 0;
+	}
+
+	/*
+	 * Verify if the sensor has just been powered on. TODO: replace this
+	 * with proper PM, when a suitable API is available.
+	 */
+	ret = reg_read(client, RJ54N1_RESET_STANDBY);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & E_EXCLK)) {
+		ret = rj54n1_reg_init(client);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* RA_SEL_UL is only relevant for raw modes, ignored otherwise. */
+	switch (mf->code) {
+	case MEDIA_BUS_FMT_YUYV8_2X8:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 0);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
+		break;
+	case MEDIA_BUS_FMT_YVYU8_2X8:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 0);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
+		break;
+	case MEDIA_BUS_FMT_RGB565_2X8_LE:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 0x11);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
+		break;
+	case MEDIA_BUS_FMT_RGB565_2X8_BE:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 0x11);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
+		break;
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_LE:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 4);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_RA_SEL_UL, 0);
+		break;
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 4);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_RA_SEL_UL, 8);
+		break;
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_BE:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 4);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_RA_SEL_UL, 0);
+		break;
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_BE:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 4);
+		if (!ret)
+			ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_RA_SEL_UL, 8);
+		break;
+	case MEDIA_BUS_FMT_SBGGR10_1X10:
+		ret = reg_write(client, RJ54N1_OUT_SEL, 5);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	/* Special case: a raw mode with 10 bits of data per clock tick */
+	if (!ret)
+		ret = reg_set(client, RJ54N1_OCLK_SEL_EN,
+			      (mf->code == MEDIA_BUS_FMT_SBGGR10_1X10) << 1, 2);
+
+	if (ret < 0)
+		return ret;
+
+	/* Supported scales 1:1 >= scale > 1:16 */
+	max_w = mf->width * (16 * 1024 - 1) / 1024;
+	if (input_w > max_w)
+		input_w = max_w;
+	max_h = mf->height * (16 * 1024 - 1) / 1024;
+	if (input_h > max_h)
+		input_h = max_h;
+
+	output_w = mf->width;
+	output_h = mf->height;
+
+	ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h);
+	if (ret < 0)
+		return ret;
+
+	fmt = rj54n1_find_datafmt(mf->code, rj54n1_colour_fmts,
+				  ARRAY_SIZE(rj54n1_colour_fmts));
+
+	rj54n1->fmt		= fmt;
+	rj54n1->resize		= ret;
+	rj54n1->rect.width	= input_w;
+	rj54n1->rect.height	= input_h;
+	rj54n1->width		= output_w;
+	rj54n1->height		= output_h;
+
+	mf->width		= output_w;
+	mf->height		= output_h;
+	mf->field		= V4L2_FIELD_NONE;
+	mf->colorspace		= fmt->colorspace;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int rj54n1_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg < 0x400 || reg->reg > 0x1fff)
+		/* Registers > 0x0800 are only available from Sharp support */
+		return -EINVAL;
+
+	reg->size = 1;
+	reg->val = reg_read(client, reg->reg);
+
+	if (reg->val > 0xff)
+		return -EIO;
+
+	return 0;
+}
+
+static int rj54n1_s_register(struct v4l2_subdev *sd,
+			     const struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg < 0x400 || reg->reg > 0x1fff)
+		/* Registers >= 0x0800 are only available from Sharp support */
+		return -EINVAL;
+
+	if (reg_write(client, reg->reg, reg->val) < 0)
+		return -EIO;
+
+	return 0;
+}
+#endif
+
+static int rj54n1_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+
+	return soc_camera_set_power(&client->dev, ssdd, rj54n1->clk, on);
+}
+
+static int rj54n1_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct rj54n1 *rj54n1 = container_of(ctrl->handler, struct rj54n1, hdl);
+	struct v4l2_subdev *sd = &rj54n1->subdev;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int data;
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		if (ctrl->val)
+			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 1);
+		else
+			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 1, 1);
+		if (data < 0)
+			return -EIO;
+		return 0;
+	case V4L2_CID_HFLIP:
+		if (ctrl->val)
+			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 2);
+		else
+			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 2, 2);
+		if (data < 0)
+			return -EIO;
+		return 0;
+	case V4L2_CID_GAIN:
+		if (reg_write(client, RJ54N1_Y_GAIN, ctrl->val * 2) < 0)
+			return -EIO;
+		return 0;
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		/* Auto WB area - whole image */
+		if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->val << 7,
+			    0x80) < 0)
+			return -EIO;
+		rj54n1->auto_wb = ctrl->val;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops rj54n1_ctrl_ops = {
+	.s_ctrl = rj54n1_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= rj54n1_g_register,
+	.s_register	= rj54n1_s_register,
+#endif
+	.s_power	= rj54n1_s_power,
+};
+
+static int rj54n1_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+
+	cfg->flags =
+		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+	return 0;
+}
+
+static int rj54n1_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+
+	/* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
+	if (soc_camera_apply_board_flags(ssdd, cfg) &
+	    V4L2_MBUS_PCLK_SAMPLE_RISING)
+		return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
+	else
+		return reg_write(client, RJ54N1_OUT_SIGPO, 0);
+}
+
+static const struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = {
+	.s_stream	= rj54n1_s_stream,
+	.g_mbus_config	= rj54n1_g_mbus_config,
+	.s_mbus_config	= rj54n1_s_mbus_config,
+};
+
+static const struct v4l2_subdev_pad_ops rj54n1_subdev_pad_ops = {
+	.enum_mbus_code = rj54n1_enum_mbus_code,
+	.get_selection	= rj54n1_get_selection,
+	.set_selection	= rj54n1_set_selection,
+	.get_fmt	= rj54n1_get_fmt,
+	.set_fmt	= rj54n1_set_fmt,
+};
+
+static const struct v4l2_subdev_ops rj54n1_subdev_ops = {
+	.core	= &rj54n1_subdev_core_ops,
+	.video	= &rj54n1_subdev_video_ops,
+	.pad	= &rj54n1_subdev_pad_ops,
+};
+
+/*
+ * Interface active, can use i2c. If it fails, it can indeed mean, that
+ * this wasn't our capture interface, so, we wait for the right one
+ */
+static int rj54n1_video_probe(struct i2c_client *client,
+			      struct rj54n1_pdata *priv)
+{
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	int data1, data2;
+	int ret;
+
+	ret = rj54n1_s_power(&rj54n1->subdev, 1);
+	if (ret < 0)
+		return ret;
+
+	/* Read out the chip version register */
+	data1 = reg_read(client, RJ54N1_DEV_CODE);
+	data2 = reg_read(client, RJ54N1_DEV_CODE2);
+
+	if (data1 != 0x51 || data2 != 0x10) {
+		ret = -ENODEV;
+		dev_info(&client->dev, "No RJ54N1CB0C found, read 0x%x:0x%x\n",
+			 data1, data2);
+		goto done;
+	}
+
+	/* Configure IOCTL polarity from the platform data: 0 or 1 << 7. */
+	ret = reg_write(client, RJ54N1_IOC, priv->ioctl_high << 7);
+	if (ret < 0)
+		goto done;
+
+	dev_info(&client->dev, "Detected a RJ54N1CB0C chip ID 0x%x:0x%x\n",
+		 data1, data2);
+
+	ret = v4l2_ctrl_handler_setup(&rj54n1->hdl);
+
+done:
+	rj54n1_s_power(&rj54n1->subdev, 0);
+	return ret;
+}
+
+static int rj54n1_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct rj54n1 *rj54n1;
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct rj54n1_pdata *rj54n1_priv;
+	int ret;
+
+	if (!ssdd || !ssdd->drv_priv) {
+		dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
+		return -EINVAL;
+	}
+
+	rj54n1_priv = ssdd->drv_priv;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_warn(&adapter->dev,
+			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
+		return -EIO;
+	}
+
+	rj54n1 = devm_kzalloc(&client->dev, sizeof(struct rj54n1), GFP_KERNEL);
+	if (!rj54n1)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(&rj54n1->subdev, client, &rj54n1_subdev_ops);
+	v4l2_ctrl_handler_init(&rj54n1->hdl, 4);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_GAIN, 0, 127, 1, 66);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+	rj54n1->subdev.ctrl_handler = &rj54n1->hdl;
+	if (rj54n1->hdl.error)
+		return rj54n1->hdl.error;
+
+	rj54n1->clk_div		= clk_div;
+	rj54n1->rect.left	= RJ54N1_COLUMN_SKIP;
+	rj54n1->rect.top	= RJ54N1_ROW_SKIP;
+	rj54n1->rect.width	= RJ54N1_MAX_WIDTH;
+	rj54n1->rect.height	= RJ54N1_MAX_HEIGHT;
+	rj54n1->width		= RJ54N1_MAX_WIDTH;
+	rj54n1->height		= RJ54N1_MAX_HEIGHT;
+	rj54n1->fmt		= &rj54n1_colour_fmts[0];
+	rj54n1->resize		= 1024;
+	rj54n1->tgclk_mhz	= (rj54n1_priv->mclk_freq / PLL_L * PLL_N) /
+		(clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1);
+
+	rj54n1->clk = v4l2_clk_get(&client->dev, "mclk");
+	if (IS_ERR(rj54n1->clk)) {
+		ret = PTR_ERR(rj54n1->clk);
+		goto eclkget;
+	}
+
+	ret = rj54n1_video_probe(client, rj54n1_priv);
+	if (ret < 0) {
+		v4l2_clk_put(rj54n1->clk);
+eclkget:
+		v4l2_ctrl_handler_free(&rj54n1->hdl);
+	}
+
+	return ret;
+}
+
+static int rj54n1_remove(struct i2c_client *client)
+{
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+
+	v4l2_clk_put(rj54n1->clk);
+	v4l2_device_unregister_subdev(&rj54n1->subdev);
+	if (ssdd->free_bus)
+		ssdd->free_bus(ssdd);
+	v4l2_ctrl_handler_free(&rj54n1->hdl);
+
+	return 0;
+}
+
+static const struct i2c_device_id rj54n1_id[] = {
+	{ "rj54n1cb0c", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rj54n1_id);
+
+static struct i2c_driver rj54n1_i2c_driver = {
+	.driver = {
+		.name = "rj54n1cb0c",
+	},
+	.probe		= rj54n1_probe,
+	.remove		= rj54n1_remove,
+	.id_table	= rj54n1_id,
+};
+
+module_i2c_driver(rj54n1_i2c_driver);
+
+MODULE_DESCRIPTION("Sharp RJ54N1CB0C Camera driver");
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_LICENSE("GPL v2");