@@ -254,6 +254,18 @@ static const struct ceu_fmt ceu_fmt_list[] = {
.fourcc = V4L2_PIX_FMT_YUYV,
.bpp = 16,
},
+ {
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .bpp = 16,
+ },
};
static const struct ceu_fmt *get_ceu_fmt_from_fourcc(unsigned int fourcc)
@@ -272,6 +284,9 @@ static bool ceu_fmt_mplane(struct v4l2_pix_format_mplane *pix)
{
switch (pix->pixelformat) {
case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_VYUY:
return false;
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
@@ -380,7 +395,9 @@ static int ceu_hw_config(struct ceu_device *ceudev)
switch (pix->pixelformat) {
/* Data fetch sync mode */
case V4L2_PIX_FMT_YUYV:
- /* TODO: handle YUYV permutations through DTARY bits. */
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_VYUY:
camcr = CEU_CAMCR_JPEG;
cdocr |= CEU_CDOCR_NO_DOWSAMPLE;
cfzsr = (pix->height << 16) | pix->width;
@@ -568,6 +585,9 @@ static void ceu_calc_plane_sizes(struct ceu_device *ceudev,
switch (pix->pixelformat) {
case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_VYUY:
pix->num_planes = 1;
bpl = pix->width * ceu_fmt->bpp / 8;
szimage = pix->height * bpl;
@@ -762,42 +782,59 @@ static const struct vb2_ops ceu_vb2_ops = {
/* --- CEU image formats handling --- */
/*
- * ceu_try_fmt() - test format on CEU and sensor
+ * __ceu_try_fmt() - test format on CEU and sensor
* @ceudev: The CEU device.
* @v4l2_fmt: format to test.
+ * @sd_mbus_code: the media bus code accepted by the subdevice; output param.
*
* Returns 0 for success, < 0 for errors.
*/
-static int ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
+static int __ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt,
+ u32 *sd_mbus_code)
{
struct ceu_subdev *ceu_sd = ceudev->sd;
struct v4l2_pix_format_mplane *pix = &v4l2_fmt->fmt.pix_mp;
struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
struct v4l2_subdev_pad_config pad_cfg;
const struct ceu_fmt *ceu_fmt;
+ u32 mbus_code_old;
+ u32 mbus_code;
int ret;
/*
* Set format on sensor sub device: bus format used to produce memory
- * format is selected at initialization time.
+ * format is selected depending on YUV component ordering or
+ * at initialization time.
*/
struct v4l2_subdev_format sd_format = {
.which = V4L2_SUBDEV_FORMAT_TRY,
- .format = {
- .code = ceu_sd->mbus_fmt.mbus_code,
- },
};
+ mbus_code_old = ceu_sd->mbus_fmt.mbus_code;
+
switch (pix->pixelformat) {
case V4L2_PIX_FMT_YUYV:
+ mbus_code = MEDIA_BUS_FMT_YUYV8_2X8;
+ break;
+ case V4L2_PIX_FMT_UYVY:
+ mbus_code = MEDIA_BUS_FMT_UYVY8_2X8;
+ break;
+ case V4L2_PIX_FMT_YVYU:
+ mbus_code = MEDIA_BUS_FMT_YVYU8_2X8;
+ break;
+ case V4L2_PIX_FMT_VYUY:
+ mbus_code = MEDIA_BUS_FMT_VYUY8_2X8;
+ break;
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
+ mbus_code = ceu_sd->mbus_fmt.mbus_code;
break;
default:
pix->pixelformat = V4L2_PIX_FMT_NV16;
+ mbus_code = ceu_sd->mbus_fmt.mbus_code;
break;
}
@@ -808,9 +845,25 @@ static int ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
&pix->height, 4, CEU_MAX_HEIGHT, 4, 0);
v4l2_fill_mbus_format_mplane(&sd_format.format, pix);
+
+ /*
+ * Try with the mbus_code matching YUYV components ordering first,
+ * if that one fails, fallback to default selected at initialization
+ * time.
+ */
+ sd_format.format.code = mbus_code;
ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, &pad_cfg, &sd_format);
- if (ret)
- return ret;
+ if (ret) {
+ if (ret == -EINVAL) {
+ /* fallback */
+ sd_format.format.code = mbus_code_old;
+ ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt,
+ &pad_cfg, &sd_format);
+ }
+
+ if (ret)
+ return ret;
+ }
/* Apply size returned by sensor as the CEU can't scale. */
v4l2_fill_pix_format_mplane(pix, &sd_format.format);
@@ -818,16 +871,30 @@ static int ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
/* Calculate per-plane sizes based on image format. */
ceu_calc_plane_sizes(ceudev, ceu_fmt, pix);
+ /* Report to caller the configured mbus format. */
+ *sd_mbus_code = sd_format.format.code;
+
return 0;
}
/*
+ * ceu_try_fmt() - Wrapper for __ceu_try_fmt; discard configured mbus_fmt
+ */
+static int ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
+{
+ u32 mbus_code;
+
+ return __ceu_try_fmt(ceudev, v4l2_fmt, &mbus_code);
+}
+
+/*
* ceu_set_fmt() - Apply the supplied format to both sensor and CEU
*/
static int ceu_set_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
{
struct ceu_subdev *ceu_sd = ceudev->sd;
struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
+ u32 mbus_code;
int ret;
/*
@@ -836,15 +903,13 @@ static int ceu_set_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
*/
struct v4l2_subdev_format format = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .format = {
- .code = ceu_sd->mbus_fmt.mbus_code,
- },
};
- ret = ceu_try_fmt(ceudev, v4l2_fmt);
+ ret = __ceu_try_fmt(ceudev, v4l2_fmt, &mbus_code);
if (ret)
return ret;
+ format.format.code = mbus_code;
v4l2_fill_mbus_format_mplane(&format.format, &v4l2_fmt->fmt.pix_mp);
ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, NULL, &format);
if (ret)
Add support for YUYV permutations, passing down to the subdevice the media bus format with components ordering that reflect the output pixel format one. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- drivers/media/platform/renesas-ceu.c | 91 ++++++++++++++++++++++++++++++------ 1 file changed, 78 insertions(+), 13 deletions(-) -- 2.7.4