@@ -861,6 +861,17 @@ config VIDEO_MT9V032
This is a Video4Linux2 sensor-level driver for the Micron
MT9V032 752x480 CMOS sensor.
+config VIDEO_MT9V111
+ tristate "Aptina MT9V111 sensor support"
+ depends on I2C && VIDEO_V4L2
+ depends on MEDIA_CAMERA_SUPPORT
+ help
+ This is a Video4Linux2 sensor driver for the Aptina/Micron
+ MT9V111 sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mt9v111.
+
config VIDEO_SR030PC30
tristate "Siliconfile SR030PC30 sensor support"
depends on I2C && VIDEO_V4L2
@@ -86,6 +86,7 @@ obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o
obj-$(CONFIG_VIDEO_MT9T112) += mt9t112.o
obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
+obj-$(CONFIG_VIDEO_MT9V111) += mt9v111.o
obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
obj-$(CONFIG_VIDEO_RJ54N1) += rj54n1cb0c.o
new file mode 100644
@@ -0,0 +1,1298 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * V4L2 sensor driver for Aptina MT9V111 image sensor
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ *
+ * Based on mt9v032 driver
+ * Copyright (C) 2010, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * Based on mt9v011 driver
+ * Copyright (c) 2009 Mauro Carvalho Chehab <mchehab@kernel.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/module.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-subdev.h>
+
+/*
+ * MT9V111 is a 1/4-Inch CMOS digital image sensor with an integrated
+ * Image Flow Processing (IFP) engine and a sensor core loosely based on
+ * MT9V011.
+ *
+ * The IFP can produce several output image formats from the sensor core
+ * output. This driver currently supports only YUYV format permutations.
+ *
+ * The driver allows manual frame rate control through s_frame_interval subdev
+ * operation or V4L2_CID_V/HBLANK controls, but it is known that the
+ * auto-exposure algorithm might modify the programmed frame rate. While the
+ * driver initially programs the sensor with auto-exposure and
+ * auto-white-balancing enabled, it is possible to disable them and more
+ * precisely control the frame rate.
+ *
+ * While it seems possible to instruct the auto-exposure control algorithm to
+ * respect a programmed frame rate when adjusting the pixel integration time,
+ * registers controlling this feature are not documented in the public
+ * available sensor manual used to develop this driver (09005aef80e90084,
+ * MT9V111_1.fm - Rev. G 1/05 EN).
+ */
+
+#define MT9V111_CHIP_ID_HIGH 0x82
+#define MT9V111_CHIP_ID_LOW 0x3a
+
+#define MT9V111_R01_ADDR_SPACE 0x01
+#define MT9V111_R01_IFP 0x01
+#define MT9V111_R01_CORE 0x04
+
+#define MT9V111_IFP_R06_OPMODE_CTRL 0x06
+#define MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN BIT(1)
+#define MT9V111_IFP_R06_OPMODE_CTRL_AE_EN BIT(14)
+#define MT9V111_IFP_R07_IFP_RESET 0x07
+#define MT9V111_IFP_R07_IFP_RESET_MASK BIT(0)
+#define MT9V111_IFP_R08_OUTFMT_CTRL 0x08
+#define MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER BIT(11)
+#define MT9V111_IFP_R08_OUTFMT_CTRL_PCLK BIT(5)
+#define MT9V111_IFP_R3A_OUTFMT_CTRL2 0x3a
+#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR BIT(0)
+#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC BIT(1)
+#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK GENMASK(2, 0)
+#define MT9V111_IFP_RA5_HPAN 0xa5
+#define MT9V111_IFP_RA6_HZOOM 0xa6
+#define MT9V111_IFP_RA7_HOUT 0xa7
+#define MT9V111_IFP_RA8_VPAN 0xa8
+#define MT9V111_IFP_RA9_VZOOM 0xa9
+#define MT9V111_IFP_RAA_VOUT 0xaa
+#define MT9V111_IFP_DECIMATION_MASK GENMASK(9, 0)
+#define MT9V111_IFP_DECIMATION_FREEZE BIT(15)
+
+#define MT9V111_CORE_R03_WIN_HEIGHT 0x03
+#define MT9V111_CORE_R03_WIN_V_OFFS 2
+#define MT9V111_CORE_R04_WIN_WIDTH 0x04
+#define MT9V111_CORE_R04_WIN_H_OFFS 114
+#define MT9V111_CORE_R05_HBLANK 0x05
+#define MT9V111_CORE_R05_MIN_HBLANK 0x09
+#define MT9V111_CORE_R05_MAX_HBLANK GENMASK(9, 0)
+#define MT9V111_CORE_R05_DEF_HBLANK 0x26
+#define MT9V111_CORE_R06_VBLANK 0x06
+#define MT9V111_CORE_R06_MIN_VBLANK 0x03
+#define MT9V111_CORE_R06_MAX_VBLANK GENMASK(11, 0)
+#define MT9V111_CORE_R06_DEF_VBLANK 0x04
+#define MT9V111_CORE_R07_OUT_CTRL 0x07
+#define MT9V111_CORE_R07_OUT_CTRL_SAMPLE BIT(4)
+#define MT9V111_CORE_R09_PIXEL_INT 0x09
+#define MT9V111_CORE_R09_PIXEL_INT_MASK GENMASK(11, 0)
+#define MT9V111_CORE_R0D_CORE_RESET 0x0d
+#define MT9V111_CORE_R0D_CORE_RESET_MASK BIT(0)
+#define MT9V111_CORE_RFF_CHIP_VER 0xff
+
+#define MT9V111_PIXEL_ARRAY_WIDTH 640
+#define MT9V111_PIXEL_ARRAY_HEIGHT 480
+
+#define MT9V111_MAX_CLKIN 27000000
+
+/* The default sensor configuration at startup time. */
+static struct v4l2_mbus_framefmt mt9v111_def_fmt = {
+ .width = 640,
+ .height = 480,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .ycbcr_enc = V4L2_YCBCR_ENC_601,
+ .quantization = V4L2_QUANTIZATION_LIM_RANGE,
+ .xfer_func = V4L2_XFER_FUNC_SRGB,
+};
+
+struct mt9v111_dev {
+ struct device *dev;
+ struct i2c_client *client;
+
+ u8 addr_space;
+
+ struct v4l2_subdev sd;
+#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
+ struct media_pad pad;
+#endif
+
+ struct v4l2_ctrl *auto_awb;
+ struct v4l2_ctrl *auto_exp;
+ struct v4l2_ctrl *hblank;
+ struct v4l2_ctrl *vblank;
+ struct v4l2_ctrl_handler ctrls;
+
+ /* Output image format and sizes. */
+ struct v4l2_mbus_framefmt fmt;
+ unsigned int fps;
+
+ /* Protects power up/down sequences. */
+ struct mutex pwr_mutex;
+ int pwr_count;
+
+ /* Protects stream on/off sequences. */
+ struct mutex stream_mutex;
+ bool streaming;
+
+ /* Flags to mark HW settings as not yet applied. */
+ bool pending;
+
+ /* Clock provider and system clock frequency. */
+ struct clk *clk;
+ u32 sysclk;
+
+ struct gpio_desc *oe;
+ struct gpio_desc *standby;
+ struct gpio_desc *reset;
+};
+
+#define sd_to_mt9v111(__sd) container_of((__sd), struct mt9v111_dev, sd)
+
+/*
+ * mt9v111_mbus_fmt - List all media bus formats supported by the driver.
+ *
+ * Only list the media bus code here. The image sizes are freely configurable
+ * in the pixel array sizes range.
+ *
+ * The desired frame interval, in the supported frame interval range, is
+ * obtained by configuring blanking as the sensor does not have a PLL but
+ * only a fixed clock divider that generates the output pixel clock.
+ */
+static struct mt9v111_mbus_fmt {
+ u32 code;
+} mt9v111_formats[] = {
+ {
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ },
+ {
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ },
+ {
+ .code = MEDIA_BUS_FMT_VYUY8_2X8,
+ },
+ {
+ .code = MEDIA_BUS_FMT_YVYU8_2X8,
+ },
+};
+
+static u32 mt9v111_frame_intervals[] = {5, 10, 15, 20, 30};
+
+/*
+ * mt9v111_frame_sizes - List sensor's supported resolutions.
+ *
+ * Resolution generated through decimation in the IFP block from the
+ * full VGA pixel array.
+ */
+static struct v4l2_rect mt9v111_frame_sizes[] = {
+ {
+ .width = 640,
+ .height = 480,
+ },
+ {
+ .width = 352,
+ .height = 288
+ },
+ {
+ .width = 320,
+ .height = 240,
+ },
+ {
+ .width = 176,
+ .height = 144,
+ },
+ {
+ .width = 160,
+ .height = 120,
+ },
+};
+
+/* --- Device I/O access --- */
+
+static int __mt9v111_read(struct i2c_client *c, u8 reg, u16 *val)
+{
+ struct i2c_msg msg[2];
+ __be16 buf;
+ int ret;
+
+ msg[0].addr = c->addr;
+ msg[0].flags = 0;
+ msg[0].len = 1;
+ msg[0].buf = ®
+
+ msg[1].addr = c->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = 2;
+ msg[1].buf = (char *)&buf;
+
+ ret = i2c_transfer(c->adapter, msg, 2);
+ if (ret < 0) {
+ dev_err(&c->dev, "i2c read transfer error: %d\n", ret);
+ return ret;
+ }
+
+ *val = be16_to_cpu(buf);
+
+ dev_dbg(&c->dev, "%s: %x=%x\n", __func__, reg, *val);
+
+ return 0;
+}
+
+static int __mt9v111_write(struct i2c_client *c, u8 reg, u16 val)
+{
+ struct i2c_msg msg;
+ u8 buf[3] = { 0 };
+ int ret;
+
+ buf[0] = reg;
+ buf[1] = val >> 8;
+ buf[2] = val & 0xff;
+
+ msg.addr = c->addr;
+ msg.flags = 0;
+ msg.len = 3;
+ msg.buf = (char *)buf;
+
+ dev_dbg(&c->dev, "%s: %x = %x%x\n", __func__, reg, buf[1], buf[2]);
+
+ ret = i2c_transfer(c->adapter, &msg, 1);
+ if (ret < 0) {
+ dev_err(&c->dev, "i2c write transfer error: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __mt9v111_addr_space_select(struct i2c_client *c, u16 addr_space)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(c);
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
+ u16 val;
+ int ret;
+
+ if (mt9v111->addr_space == addr_space)
+ return 0;
+
+ ret = __mt9v111_write(c, MT9V111_R01_ADDR_SPACE, addr_space);
+ if (ret)
+ return ret;
+
+ /* Verify address space has been updated */
+ ret = __mt9v111_read(c, MT9V111_R01_ADDR_SPACE, &val);
+ if (ret)
+ return ret;
+
+ if (val != addr_space)
+ return -EINVAL;
+
+ mt9v111->addr_space = addr_space;
+
+ return 0;
+}
+
+static int mt9v111_read(struct i2c_client *c, u8 addr_space, u8 reg, u16 *val)
+{
+ int ret;
+
+ /* Select register address space first. */
+ ret = __mt9v111_addr_space_select(c, addr_space);
+ if (ret)
+ return ret;
+
+ ret = __mt9v111_read(c, reg, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mt9v111_write(struct i2c_client *c, u8 addr_space, u8 reg, u16 val)
+{
+ int ret;
+
+ /* Select register address space first. */
+ ret = __mt9v111_addr_space_select(c, addr_space);
+ if (ret)
+ return ret;
+
+ ret = __mt9v111_write(c, reg, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mt9v111_update(struct i2c_client *c, u8 addr_space, u8 reg,
+ u16 mask, u16 val)
+{
+ u16 current_val;
+ int ret;
+
+ /* Select register address space first. */
+ ret = __mt9v111_addr_space_select(c, addr_space);
+ if (ret)
+ return ret;
+
+ /* Read the current register value, then update it. */
+ ret = __mt9v111_read(c, reg, ¤t_val);
+ if (ret)
+ return ret;
+
+ current_val &= ~mask;
+ current_val |= (val & mask);
+ ret = __mt9v111_write(c, reg, current_val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/* --- Sensor HW operations --- */
+
+static int __mt9v111_power_on(struct v4l2_subdev *sd)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
+ int ret;
+
+ ret = clk_prepare_enable(mt9v111->clk);
+ if (ret)
+ return ret;
+
+ clk_set_rate(mt9v111->clk, mt9v111->sysclk);
+
+ gpiod_set_value(mt9v111->standby, 0);
+ usleep_range(500, 1000);
+
+ gpiod_set_value(mt9v111->oe, 1);
+ usleep_range(500, 1000);
+
+ return 0;
+}
+
+static int __mt9v111_power_off(struct v4l2_subdev *sd)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
+
+ gpiod_set_value(mt9v111->oe, 0);
+ usleep_range(500, 1000);
+
+ gpiod_set_value(mt9v111->standby, 1);
+ usleep_range(500, 1000);
+
+ clk_disable_unprepare(mt9v111->clk);
+
+ return 0;
+}
+
+static int __mt9v111_hw_reset(struct mt9v111_dev *mt9v111)
+{
+ if (!mt9v111->reset)
+ return -EINVAL;
+
+ gpiod_set_value(mt9v111->reset, 1);
+ usleep_range(500, 1000);
+
+ gpiod_set_value(mt9v111->reset, 0);
+ usleep_range(500, 1000);
+
+ return 0;
+}
+
+static int __mt9v111_sw_reset(struct mt9v111_dev *mt9v111)
+{
+ struct i2c_client *c = mt9v111->client;
+ int ret;
+
+ /* Software reset core and IFP blocks. */
+
+ ret = mt9v111_update(c, MT9V111_R01_CORE,
+ MT9V111_CORE_R0D_CORE_RESET,
+ MT9V111_CORE_R0D_CORE_RESET_MASK, 1);
+ if (ret)
+ return ret;
+ usleep_range(500, 1000);
+
+ ret = mt9v111_update(c, MT9V111_R01_CORE,
+ MT9V111_CORE_R0D_CORE_RESET,
+ MT9V111_CORE_R0D_CORE_RESET_MASK, 0);
+ if (ret)
+ return ret;
+ usleep_range(500, 1000);
+
+ ret = mt9v111_update(c, MT9V111_R01_IFP,
+ MT9V111_IFP_R07_IFP_RESET,
+ MT9V111_IFP_R07_IFP_RESET_MASK, 1);
+ if (ret)
+ return ret;
+ usleep_range(500, 1000);
+
+ ret = mt9v111_update(c, MT9V111_R01_IFP,
+ MT9V111_IFP_R07_IFP_RESET,
+ MT9V111_IFP_R07_IFP_RESET_MASK, 0);
+ if (ret)
+ return ret;
+ usleep_range(500, 1000);
+
+ return 0;
+}
+
+static int mt9v111_calc_frame_rate(struct mt9v111_dev *mt9v111,
+ struct v4l2_fract *tpf)
+{
+ unsigned int fps = tpf->numerator ?
+ tpf->denominator / tpf->numerator :
+ tpf->denominator;
+ unsigned int best_diff;
+ unsigned int frm_cols;
+ unsigned int row_pclk;
+ unsigned int best_fps;
+ unsigned int pclk;
+ unsigned int diff;
+ unsigned int idx;
+ unsigned int hb;
+ unsigned int vb;
+ unsigned int i;
+ int ret;
+
+ /* Approximate to the closest supported frame interval. */
+ best_diff = ~0L;
+ for (i = 0, idx = 0; i < ARRAY_SIZE(mt9v111_frame_intervals); i++) {
+ diff = abs(fps - mt9v111_frame_intervals[i]);
+ if (diff < best_diff) {
+ idx = i;
+ best_diff = diff;
+ }
+ }
+ fps = mt9v111_frame_intervals[idx];
+
+ /*
+ * The sensor does not provide a PLL circuitry and pixel clock is
+ * generated dividing the master clock source by two.
+ *
+ * Trow = (W + Hblank + 114) * 2 * (1 / SYSCLK)
+ * TFrame = Trow * (H + Vblank + 2)
+ *
+ * FPS = (SYSCLK / 2) / (Trow * (H + Vblank + 2))
+ *
+ * This boils down to tune H and V blanks to best approximate the
+ * above equation.
+ *
+ * Test all available H/V blank values, until we reach the
+ * desired frame rate.
+ */
+ best_fps = vb = hb = 0;
+ pclk = DIV_ROUND_CLOSEST(mt9v111->sysclk, 2);
+ row_pclk = MT9V111_PIXEL_ARRAY_WIDTH + 7 + MT9V111_CORE_R04_WIN_H_OFFS;
+ frm_cols = MT9V111_PIXEL_ARRAY_HEIGHT + 7 + MT9V111_CORE_R03_WIN_V_OFFS;
+
+ best_diff = ~0L;
+ for (vb = MT9V111_CORE_R06_MIN_VBLANK;
+ vb < MT9V111_CORE_R06_MAX_VBLANK; vb++) {
+ for (hb = MT9V111_CORE_R05_MIN_HBLANK;
+ hb < MT9V111_CORE_R05_MAX_HBLANK; hb += 10) {
+ unsigned int t_frame = (row_pclk + hb) *
+ (frm_cols + vb);
+ unsigned int t_fps = DIV_ROUND_CLOSEST(pclk, t_frame);
+
+ diff = abs(fps - t_fps);
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_fps = t_fps;
+
+ if (diff == 0)
+ break;
+ }
+ }
+
+ if (diff == 0)
+ break;
+ }
+
+ ret = v4l2_ctrl_s_ctrl_int64(mt9v111->hblank, hb);
+ if (ret)
+ return ret;
+
+ ret = v4l2_ctrl_s_ctrl_int64(mt9v111->vblank, vb);
+ if (ret)
+ return ret;
+
+ tpf->numerator = 1;
+ tpf->denominator = best_fps;
+
+ return 0;
+}
+
+static int mt9v111_hw_config(struct mt9v111_dev *mt9v111)
+{
+ struct i2c_client *c = mt9v111->client;
+ unsigned int ret;
+ u16 outfmtctrl2;
+
+ /* Force device reset. */
+ ret = __mt9v111_hw_reset(mt9v111);
+ if (ret == -EINVAL)
+ ret = __mt9v111_sw_reset(mt9v111);
+ if (ret)
+ return ret;
+
+ /* Configure internal clock sample rate. */
+ ret = mt9v111->sysclk < DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ?
+ mt9v111_update(c, MT9V111_R01_CORE,
+ MT9V111_CORE_R07_OUT_CTRL,
+ MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 1) :
+ mt9v111_update(c, MT9V111_R01_CORE,
+ MT9V111_CORE_R07_OUT_CTRL,
+ MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 0);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure output image format components ordering.
+ *
+ * TODO: IFP block can also output several RGB permutations, we only
+ * support YUYV permutations at the moment.
+ */
+ switch (mt9v111->fmt.code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC;
+ break;
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR;
+ break;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC |
+ MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ default:
+ outfmtctrl2 = 0;
+ break;
+ }
+
+ ret = mt9v111_update(c, MT9V111_R01_IFP, MT9V111_IFP_R3A_OUTFMT_CTRL2,
+ MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK,
+ outfmtctrl2);
+ if (ret)
+ return ret;
+
+ /*
+ * Do not change default sensor's core configuration:
+ * output the whole 640x480 pixel array, skip 18 columns and 6 rows.
+ *
+ * Instead, control the output image size through IFP block.
+ *
+ * TODO: No zoom&pan support. Currently we control the output image
+ * size only through decimation, with no zoom support.
+ */
+ ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA5_HPAN,
+ MT9V111_IFP_DECIMATION_FREEZE);
+ if (ret)
+ return ret;
+
+ ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA8_VPAN,
+ MT9V111_IFP_DECIMATION_FREEZE);
+ if (ret)
+ return ret;
+
+ ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA6_HZOOM,
+ MT9V111_IFP_DECIMATION_FREEZE |
+ MT9V111_PIXEL_ARRAY_WIDTH);
+ if (ret)
+ return ret;
+
+ ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA9_VZOOM,
+ MT9V111_IFP_DECIMATION_FREEZE |
+ MT9V111_PIXEL_ARRAY_HEIGHT);
+ if (ret)
+ return ret;
+
+ ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA7_HOUT,
+ MT9V111_IFP_DECIMATION_FREEZE |
+ mt9v111->fmt.width);
+ if (ret)
+ return ret;
+
+ ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RAA_VOUT,
+ mt9v111->fmt.height);
+ if (ret)
+ return ret;
+
+ /* Apply controls to set auto exp, auto awb and timings */
+ ret = v4l2_ctrl_handler_setup(&mt9v111->ctrls);
+ if (ret)
+ return ret;
+
+ /*
+ * Set pixel integration time to the whole frame time.
+ * This value controls the the shutter delay when running with AE
+ * disabled. If longer than frame time, it affects the output
+ * frame rate.
+ */
+ return mt9v111_write(c, MT9V111_R01_CORE, MT9V111_CORE_R09_PIXEL_INT,
+ MT9V111_PIXEL_ARRAY_HEIGHT);
+}
+
+/* --- V4L2 subdev operations --- */
+
+static int mt9v111_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
+ int pwr_count;
+ int ret = 0;
+
+ mutex_lock(&mt9v111->pwr_mutex);
+
+ /*
+ * Make sure we're transitioning from 0 to 1, or viceversa,
+ * before actually changing the power state.
+ */
+ pwr_count = mt9v111->pwr_count;
+ pwr_count += on ? 1 : -1;
+ if (pwr_count == !!on) {
+ ret = on ? __mt9v111_power_on(sd) :
+ __mt9v111_power_off(sd);
+ if (!ret)
+ /* All went well, updated power counter. */
+ mt9v111->pwr_count = pwr_count;
+
+ mutex_unlock(&mt9v111->pwr_mutex);
+
+ return ret;
+ }
+
+ /*
+ * Update power counter to keep track of how many nested calls we
+ * received.
+ */
+ WARN_ON(pwr_count < 0 || pwr_count > 1);
+ mt9v111->pwr_count = pwr_count;
+
+ mutex_unlock(&mt9v111->pwr_mutex);
+
+ return ret;
+}
+
+static int mt9v111_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev);
+ int ret;
+
+ mutex_lock(&mt9v111->stream_mutex);
+
+ if (mt9v111->streaming == enable) {
+ mutex_unlock(&mt9v111->stream_mutex);
+ return 0;
+ }
+
+ ret = mt9v111_s_power(subdev, enable);
+ if (ret)
+ goto error_unlock;
+
+ if (enable && mt9v111->pending) {
+ ret = mt9v111_hw_config(mt9v111);
+ if (ret)
+ goto error_unlock;
+
+ /*
+ * No need to update control here as far as only H/VBLANK are
+ * supported and immediately programmed to registers in .s_ctrl
+ */
+
+ mt9v111->pending = false;
+ }
+
+ mt9v111->streaming = enable ? true : false;
+ mutex_unlock(&mt9v111->stream_mutex);
+
+ return 0;
+
+error_unlock:
+ mutex_unlock(&mt9v111->stream_mutex);
+
+ return ret;
+}
+
+static int mt9v111_s_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+ unsigned int fps = tpf->numerator ?
+ tpf->denominator / tpf->numerator :
+ tpf->denominator;
+ unsigned int max_fps;
+
+ if (!tpf->numerator)
+ tpf->numerator = 1;
+
+ mutex_lock(&mt9v111->stream_mutex);
+
+ if (mt9v111->streaming) {
+ mutex_unlock(&mt9v111->stream_mutex);
+ return -EBUSY;
+ }
+
+ if (mt9v111->fps == fps) {
+ mutex_unlock(&mt9v111->stream_mutex);
+ return 0;
+ }
+
+ /* Make sure frame rate/image sizes constraints are respected. */
+ if (mt9v111->fmt.width < QVGA_WIDTH &&
+ mt9v111->fmt.height < QVGA_HEIGHT)
+ max_fps = 90;
+ else if (mt9v111->fmt.width < CIF_WIDTH &&
+ mt9v111->fmt.height < CIF_HEIGHT)
+ max_fps = 60;
+ else
+ max_fps = mt9v111->sysclk <
+ DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ? 15 :
+ 30;
+
+ if (fps > max_fps) {
+ mutex_unlock(&mt9v111->stream_mutex);
+ return -EINVAL;
+ }
+
+ mt9v111_calc_frame_rate(mt9v111, tpf);
+
+ mt9v111->fps = fps;
+ mt9v111->pending = true;
+
+ mutex_unlock(&mt9v111->stream_mutex);
+
+ return 0;
+}
+
+static int mt9v111_g_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+
+ mutex_lock(&mt9v111->stream_mutex);
+
+ tpf->numerator = 1;
+ tpf->denominator = mt9v111->fps;
+
+ mutex_unlock(&mt9v111->stream_mutex);
+
+ return 0;
+}
+
+static struct v4l2_mbus_framefmt *__mt9v111_get_pad_format(
+ struct mt9v111_dev *mt9v111,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
+ return v4l2_subdev_get_try_format(&mt9v111->sd, cfg, pad);
+#else
+ return &cfg->try_fmt;
+#endif
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &mt9v111->fmt;
+ default:
+ return NULL;
+ }
+}
+
+static int mt9v111_enum_mbus_code(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index > ARRAY_SIZE(mt9v111_formats) - 1)
+ return -EINVAL;
+
+ code->code = mt9v111_formats[code->index].code;
+
+ return 0;
+}
+
+static int mt9v111_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ unsigned int i;
+
+ if (fie->pad || fie->index >= ARRAY_SIZE(mt9v111_frame_intervals))
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++)
+ if (fie->width == mt9v111_frame_sizes[i].width &&
+ fie->height == mt9v111_frame_sizes[i].height)
+ break;
+
+ if (i == ARRAY_SIZE(mt9v111_frame_sizes))
+ return -EINVAL;
+
+ fie->interval.numerator = 1;
+ fie->interval.denominator = mt9v111_frame_intervals[fie->index];
+
+ return 0;
+}
+
+static int mt9v111_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->pad || fse->index > ARRAY_SIZE(mt9v111_frame_sizes))
+ return -EINVAL;
+
+ fse->min_width = mt9v111_frame_sizes[fse->index].width;
+ fse->max_width = mt9v111_frame_sizes[fse->index].width;
+ fse->min_height = mt9v111_frame_sizes[fse->index].height;
+ fse->max_height = mt9v111_frame_sizes[fse->index].height;
+
+ return 0;
+}
+
+static int mt9v111_get_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev);
+
+ if (format->pad)
+ return -EINVAL;
+
+ mutex_lock(&mt9v111->stream_mutex);
+ format->format = *__mt9v111_get_pad_format(mt9v111, cfg, format->pad,
+ format->which);
+ mutex_unlock(&mt9v111->stream_mutex);
+
+ return 0;
+}
+
+static int mt9v111_set_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev);
+ struct v4l2_mbus_framefmt new_fmt;
+ struct v4l2_mbus_framefmt *__fmt;
+ unsigned int best_fit = ~0L;
+ unsigned int idx;
+ unsigned int i;
+
+ mutex_lock(&mt9v111->stream_mutex);
+ if (mt9v111->streaming) {
+ mutex_unlock(&mt9v111->stream_mutex);
+ return -EBUSY;
+ }
+
+ if (format->pad) {
+ mutex_unlock(&mt9v111->stream_mutex);
+ return -EINVAL;
+ }
+
+ /* Update mbus format code and sizes. */
+ for (i = 0; i < ARRAY_SIZE(mt9v111_formats); i++) {
+ if (format->format.code == mt9v111_formats[i].code) {
+ new_fmt.code = mt9v111_formats[i].code;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(mt9v111_formats))
+ new_fmt.code = mt9v111_formats[0].code;
+
+ for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++) {
+ unsigned int fit = abs(mt9v111_frame_sizes[i].width -
+ format->format.width) +
+ abs(mt9v111_frame_sizes[i].height -
+ format->format.height);
+ if (fit < best_fit) {
+ best_fit = fit;
+ idx = i;
+
+ if (fit == 0)
+ break;
+ }
+ }
+ new_fmt.width = mt9v111_frame_sizes[idx].width;
+ new_fmt.height = mt9v111_frame_sizes[idx].height;
+
+ /* Update the device (or pad) format if it has changed. */
+ __fmt = __mt9v111_get_pad_format(mt9v111, cfg, format->pad,
+ format->which);
+
+ /* Format hasn't changed, stop here. */
+ if (__fmt->code == new_fmt.code &&
+ __fmt->width == new_fmt.width &&
+ __fmt->height == new_fmt.height)
+ goto done;
+
+ /* Update the format and sizes, then mark changes as pending. */
+ __fmt->code = new_fmt.code;
+ __fmt->width = new_fmt.width;
+ __fmt->height = new_fmt.height;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ mt9v111->pending = true;
+
+ dev_dbg(mt9v111->dev, "%s: mbus_code: %x - (%ux%u)\n",
+ __func__, __fmt->code, __fmt->width, __fmt->height);
+
+done:
+ format->format = *__fmt;
+
+ mutex_unlock(&mt9v111->stream_mutex);
+
+ return 0;
+}
+
+static int mt9v111_init_cfg(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg)
+{
+ cfg->try_fmt = mt9v111_def_fmt;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops mt9v111_core_ops = {
+ .s_power = mt9v111_s_power,
+};
+
+static const struct v4l2_subdev_video_ops mt9v111_video_ops = {
+ .s_stream = mt9v111_s_stream,
+ .s_frame_interval = mt9v111_s_frame_interval,
+ .g_frame_interval = mt9v111_g_frame_interval,
+};
+
+static const struct v4l2_subdev_pad_ops mt9v111_pad_ops = {
+ .init_cfg = mt9v111_init_cfg,
+ .enum_mbus_code = mt9v111_enum_mbus_code,
+ .enum_frame_size = mt9v111_enum_frame_size,
+ .enum_frame_interval = mt9v111_enum_frame_interval,
+ .get_fmt = mt9v111_get_format,
+ .set_fmt = mt9v111_set_format,
+};
+
+static const struct v4l2_subdev_ops mt9v111_ops = {
+ .core = &mt9v111_core_ops,
+ .video = &mt9v111_video_ops,
+ .pad = &mt9v111_pad_ops,
+};
+
+#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
+static const struct media_entity_operations mt9v111_subdev_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+#endif
+
+/* --- V4L2 ctrl --- */
+static int mt9v111_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct mt9v111_dev *mt9v111 = container_of(ctrl->handler,
+ struct mt9v111_dev,
+ ctrls);
+ int ret;
+
+ mutex_lock(&mt9v111->pwr_mutex);
+ /*
+ * If sensor is powered down, just cache new control values,
+ * no actual register access.
+ */
+ if (!mt9v111->pwr_count) {
+ mt9v111->pending = true;
+ mutex_unlock(&mt9v111->pwr_mutex);
+ return 0;
+ }
+ mutex_unlock(&mt9v111->pwr_mutex);
+
+ /*
+ * Flickering control gets disabled if both auto exp and auto awb
+ * are disabled too. If any of the two is enabled, enable it.
+ *
+ * Disabling flickering when ae and awb are off allows a more precise
+ * control of the programmed frame rate.
+ */
+ if (mt9v111->auto_exp->is_new || mt9v111->auto_awb->is_new) {
+ if (mt9v111->auto_exp->val == V4L2_EXPOSURE_MANUAL &&
+ mt9v111->auto_awb->val == V4L2_WHITE_BALANCE_MANUAL)
+ ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP,
+ MT9V111_IFP_R08_OUTFMT_CTRL,
+ MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER,
+ 0);
+ else
+ ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP,
+ MT9V111_IFP_R08_OUTFMT_CTRL,
+ MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER,
+ 1);
+ if (ret)
+ return ret;
+ }
+
+ ret = -EINVAL;
+ switch (ctrl->id) {
+ case V4L2_CID_AUTO_WHITE_BALANCE:
+ ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP,
+ MT9V111_IFP_R06_OPMODE_CTRL,
+ MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN,
+ ctrl->val == V4L2_WHITE_BALANCE_AUTO ?
+ MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN : 0);
+ break;
+ case V4L2_CID_EXPOSURE_AUTO:
+ ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP,
+ MT9V111_IFP_R06_OPMODE_CTRL,
+ MT9V111_IFP_R06_OPMODE_CTRL_AE_EN,
+ ctrl->val == V4L2_EXPOSURE_AUTO ?
+ MT9V111_IFP_R06_OPMODE_CTRL_AE_EN : 0);
+ break;
+ case V4L2_CID_HBLANK:
+ ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE,
+ MT9V111_CORE_R05_HBLANK,
+ MT9V111_CORE_R05_MAX_HBLANK,
+ mt9v111->hblank->val);
+ break;
+ case V4L2_CID_VBLANK:
+ ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE,
+ MT9V111_CORE_R06_VBLANK,
+ MT9V111_CORE_R06_MAX_VBLANK,
+ mt9v111->vblank->val);
+ break;
+ }
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops mt9v111_ctrl_ops = {
+ .s_ctrl = mt9v111_s_ctrl,
+};
+
+static int mt9v111_chip_probe(struct mt9v111_dev *mt9v111)
+{
+ int ret;
+ u16 val;
+
+ ret = __mt9v111_power_on(&mt9v111->sd);
+ if (ret)
+ return ret;
+
+ ret = mt9v111_read(mt9v111->client, MT9V111_R01_CORE,
+ MT9V111_CORE_RFF_CHIP_VER, &val);
+ if (ret)
+ goto power_off;
+
+ if ((val >> 8) != MT9V111_CHIP_ID_HIGH &&
+ (val & 0xff) != MT9V111_CHIP_ID_LOW) {
+ dev_err(mt9v111->dev,
+ "Unable to identify MT9V111 chip: 0x%2x%2x\n",
+ val >> 8, val & 0xff);
+ ret = -EIO;
+ goto power_off;
+ }
+
+ dev_dbg(mt9v111->dev, "Chip identified: 0x%2x%2x\n",
+ val >> 8, val & 0xff);
+
+power_off:
+ __mt9v111_power_off(&mt9v111->sd);
+
+ return ret;
+}
+
+static int mt9v111_probe(struct i2c_client *client)
+{
+ struct mt9v111_dev *mt9v111;
+ struct v4l2_fract tpf;
+ int ret;
+
+ mt9v111 = devm_kzalloc(&client->dev, sizeof(*mt9v111), GFP_KERNEL);
+ if (!mt9v111)
+ return -ENOMEM;
+
+ mt9v111->dev = &client->dev;
+ mt9v111->client = client;
+
+ mt9v111->clk = devm_clk_get(&client->dev, NULL);
+ if (IS_ERR(mt9v111->clk))
+ return PTR_ERR(mt9v111->clk);
+
+ mt9v111->sysclk = clk_get_rate(mt9v111->clk);
+ if (mt9v111->sysclk > MT9V111_MAX_CLKIN)
+ return -EINVAL;
+
+ mt9v111->oe = devm_gpiod_get_optional(&client->dev, "enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(mt9v111->oe)) {
+ dev_err(&client->dev, "Unable to get GPIO \"enable\": %ld\n",
+ PTR_ERR(mt9v111->oe));
+ return PTR_ERR(mt9v111->oe);
+ }
+
+ mt9v111->standby = devm_gpiod_get_optional(&client->dev, "standby",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(mt9v111->standby)) {
+ dev_err(&client->dev, "Unable to get GPIO \"standby\": %ld\n",
+ PTR_ERR(mt9v111->standby));
+ return PTR_ERR(mt9v111->standby);
+ }
+
+ mt9v111->reset = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(mt9v111->reset)) {
+ dev_err(&client->dev, "Unable to get GPIO \"reset\": %ld\n",
+ PTR_ERR(mt9v111->reset));
+ return PTR_ERR(mt9v111->reset);
+ }
+
+ mutex_init(&mt9v111->pwr_mutex);
+ mutex_init(&mt9v111->stream_mutex);
+
+ v4l2_ctrl_handler_init(&mt9v111->ctrls, 5);
+
+ mt9v111->auto_awb = v4l2_ctrl_new_std(&mt9v111->ctrls,
+ &mt9v111_ctrl_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE,
+ 0, 1, 1,
+ V4L2_WHITE_BALANCE_AUTO);
+ if (IS_ERR_OR_NULL(mt9v111->auto_awb)) {
+ ret = PTR_ERR(mt9v111->auto_awb);
+ goto error_free_ctrls;
+ }
+
+ mt9v111->auto_exp = v4l2_ctrl_new_std_menu(&mt9v111->ctrls,
+ &mt9v111_ctrl_ops,
+ V4L2_CID_EXPOSURE_AUTO,
+ V4L2_EXPOSURE_MANUAL,
+ 0, V4L2_EXPOSURE_AUTO);
+ if (IS_ERR_OR_NULL(mt9v111->auto_exp)) {
+ ret = PTR_ERR(mt9v111->auto_exp);
+ goto error_free_ctrls;
+ }
+
+ /* Initialize timings */
+ mt9v111->hblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops,
+ V4L2_CID_HBLANK,
+ MT9V111_CORE_R05_MIN_HBLANK,
+ MT9V111_CORE_R05_MAX_HBLANK, 1,
+ MT9V111_CORE_R05_DEF_HBLANK);
+ if (IS_ERR_OR_NULL(mt9v111->hblank)) {
+ ret = PTR_ERR(mt9v111->hblank);
+ goto error_free_ctrls;
+ }
+
+ mt9v111->vblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops,
+ V4L2_CID_VBLANK,
+ MT9V111_CORE_R06_MIN_VBLANK,
+ MT9V111_CORE_R06_MAX_VBLANK, 1,
+ MT9V111_CORE_R06_DEF_VBLANK);
+ if (IS_ERR_OR_NULL(mt9v111->vblank)) {
+ ret = PTR_ERR(mt9v111->vblank);
+ goto error_free_ctrls;
+ }
+
+ /* PIXEL_RATE is fixed: just expose it to user space. */
+ v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops,
+ V4L2_CID_PIXEL_RATE, 0,
+ DIV_ROUND_CLOSEST(mt9v111->sysclk, 2), 1,
+ DIV_ROUND_CLOSEST(mt9v111->sysclk, 2));
+
+ mt9v111->sd.ctrl_handler = &mt9v111->ctrls;
+
+ /* Start with default configuration: 640x480 UYVY. */
+ mt9v111->fmt = mt9v111_def_fmt;
+
+ /* Re-calculate blankings for 640x480@15fps. */
+ mt9v111->fps = 15;
+ tpf.numerator = 1;
+ tpf.denominator = mt9v111->fps;
+ mt9v111_calc_frame_rate(mt9v111, &tpf);
+
+ mt9v111->pwr_count = 0;
+ mt9v111->addr_space = MT9V111_R01_IFP;
+ mt9v111->pending = true;
+
+ v4l2_i2c_subdev_init(&mt9v111->sd, client, &mt9v111_ops);
+
+#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
+ mt9v111->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ mt9v111->sd.entity.ops = &mt9v111_subdev_entity_ops;
+ mt9v111->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ mt9v111->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&mt9v111->sd.entity, 1, &mt9v111->pad);
+ if (ret)
+ goto error_free_ctrls;
+#endif
+
+ ret = mt9v111_chip_probe(mt9v111);
+ if (ret)
+ goto error_free_ctrls;
+
+ ret = v4l2_async_register_subdev(&mt9v111->sd);
+ if (ret)
+ goto error_free_ctrls;
+
+ return 0;
+
+error_free_ctrls:
+ v4l2_ctrl_handler_free(&mt9v111->ctrls);
+
+#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
+ media_entity_cleanup(&mt9v111->sd.entity);
+#endif
+
+ mutex_destroy(&mt9v111->pwr_mutex);
+ mutex_destroy(&mt9v111->stream_mutex);
+
+ return ret;
+}
+
+static int mt9v111_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
+
+ v4l2_async_unregister_subdev(sd);
+
+ v4l2_ctrl_handler_free(&mt9v111->ctrls);
+
+#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
+ media_entity_cleanup(&sd->entity);
+#endif
+
+ mutex_destroy(&mt9v111->pwr_mutex);
+ mutex_destroy(&mt9v111->stream_mutex);
+
+ devm_gpiod_put(mt9v111->dev, mt9v111->oe);
+ devm_gpiod_put(mt9v111->dev, mt9v111->standby);
+ devm_gpiod_put(mt9v111->dev, mt9v111->reset);
+
+ devm_clk_put(mt9v111->dev, mt9v111->clk);
+
+ return 0;
+}
+
+static const struct of_device_id mt9v111_of_match[] = {
+ { .compatible = "aptina,mt9v111", },
+ { /* sentinel */ },
+};
+
+static struct i2c_driver mt9v111_driver = {
+ .driver = {
+ .name = "mt9v111",
+ .of_match_table = mt9v111_of_match,
+ },
+ .probe_new = mt9v111_probe,
+ .remove = mt9v111_remove,
+};
+
+module_i2c_driver(mt9v111_driver);
+
+MODULE_DESCRIPTION("V4L2 sensor driver for Aptina MT9V111");
+MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
+MODULE_LICENSE("GPL v2");