| Message ID | 1536589878-26218-4-git-send-email-biju.das@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add VIN support to RZ/G2M | expand |
Hi Biju, Thanks for your patch. On 2018-09-10 15:31:16 +0100, Biju Das wrote: > Document RZ/G2M (R8A774A1) SoC bindings. > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > index 2f42005..8c81689 100644 > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver. > - compatible: Must be one or more of the following > - "renesas,vin-r8a7743" for the R8A7743 device > - "renesas,vin-r8a7745" for the R8A7745 device > + - "renesas,vin-r8a774a1" for the R8A774A1 device > - "renesas,vin-r8a7778" for the R8A7778 device > - "renesas,vin-r8a7779" for the R8A7779 device > - "renesas,vin-r8a7790" for the R8A7790 device > @@ -58,9 +59,9 @@ The per-board settings Gen2 platforms: > - data-enable-active: polarity of CLKENB signal, see [1] for > description. Default is active high. > > -The per-board settings Gen3 platforms: > +The per-board settings Gen3 and RZ/G2 platforms: > > -Gen3 platforms can support both a single connected parallel input source > +Gen3 and RZ/G2 platforms can support both a single connected parallel input source > from external SoC pins (port@0) and/or multiple parallel input sources > from local SoC CSI-2 receivers (port@1) depending on SoC. > > -- > 2.7.4 >
Dear All, Who is the best person to take this patch? Thanks, Fab > From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-owner@vger.kernel.org> On Behalf Of Biju Das > Sent: 10 September 2018 15:31 > Subject: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support > > Document RZ/G2M (R8A774A1) SoC bindings. > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > index 2f42005..8c81689 100644 > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver. > - compatible: Must be one or more of the following > - "renesas,vin-r8a7743" for the R8A7743 device > - "renesas,vin-r8a7745" for the R8A7745 device > + - "renesas,vin-r8a774a1" for the R8A774A1 device > - "renesas,vin-r8a7778" for the R8A7778 device > - "renesas,vin-r8a7779" for the R8A7779 device > - "renesas,vin-r8a7790" for the R8A7790 device > @@ -58,9 +59,9 @@ The per-board settings Gen2 platforms: > - data-enable-active: polarity of CLKENB signal, see [1] for > description. Default is active high. > > -The per-board settings Gen3 platforms: > +The per-board settings Gen3 and RZ/G2 platforms: > > -Gen3 platforms can support both a single connected parallel input source > +Gen3 and RZ/G2 platforms can support both a single connected parallel input source > from external SoC pins (port@0) and/or multiple parallel input sources > from local SoC CSI-2 receivers (port@1) depending on SoC. > > -- > 2.7.4 Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
On Thu, Nov 08, 2018 at 12:52:30PM +0000, Fabrizio Castro wrote: > Dear All, > > Who is the best person to take this patch? I believe this is for Mauro.
Hello Mauro, Does this patch look ok to you? Thanks, Fab > From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-owner@vger.kernel.org> On Behalf Of Biju Das > Sent: 10 September 2018 15:31 > Subject: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support > > Document RZ/G2M (R8A774A1) SoC bindings. > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > index 2f42005..8c81689 100644 > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver. > - compatible: Must be one or more of the following > - "renesas,vin-r8a7743" for the R8A7743 device > - "renesas,vin-r8a7745" for the R8A7745 device > + - "renesas,vin-r8a774a1" for the R8A774A1 device > - "renesas,vin-r8a7778" for the R8A7778 device > - "renesas,vin-r8a7779" for the R8A7779 device > - "renesas,vin-r8a7790" for the R8A7790 device > @@ -58,9 +59,9 @@ The per-board settings Gen2 platforms: > - data-enable-active: polarity of CLKENB signal, see [1] for > description. Default is active high. > > -The per-board settings Gen3 platforms: > +The per-board settings Gen3 and RZ/G2 platforms: > > -Gen3 platforms can support both a single connected parallel input source > +Gen3 and RZ/G2 platforms can support both a single connected parallel input source > from external SoC pins (port@0) and/or multiple parallel input sources > from local SoC CSI-2 receivers (port@1) depending on SoC. > > -- > 2.7.4 Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
On Mon, Sep 10, 2018 at 03:31:16PM +0100, Biju Das wrote: > Document RZ/G2M (R8A774A1) SoC bindings. > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Thank you Simon for getting back to me. Cheers, Fab > Subject: Re: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support > > On Thu, Nov 08, 2018 at 12:52:30PM +0000, Fabrizio Castro wrote: > > Dear All, > > > > Who is the best person to take this patch? > > I believe this is for Mauro. Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
Hello Mauro, This is a gentle reminder. Thanks, Fab > From: Fabrizio Castro > Sent: 08 November 2018 14:26 > Subject: RE: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support > > Hello Mauro, > > Does this patch look ok to you? > > Thanks, > Fab > > > From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-owner@vger.kernel.org> On Behalf Of Biju Das > > Sent: 10 September 2018 15:31 > > Subject: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support > > > > Document RZ/G2M (R8A774A1) SoC bindings. > > > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > --- > > Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++-- > > 1 file changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > > index 2f42005..8c81689 100644 > > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > > @@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver. > > - compatible: Must be one or more of the following > > - "renesas,vin-r8a7743" for the R8A7743 device > > - "renesas,vin-r8a7745" for the R8A7745 device > > + - "renesas,vin-r8a774a1" for the R8A774A1 device > > - "renesas,vin-r8a7778" for the R8A7778 device > > - "renesas,vin-r8a7779" for the R8A7779 device > > - "renesas,vin-r8a7790" for the R8A7790 device > > @@ -58,9 +59,9 @@ The per-board settings Gen2 platforms: > > - data-enable-active: polarity of CLKENB signal, see [1] for > > description. Default is active high. > > > > -The per-board settings Gen3 platforms: > > +The per-board settings Gen3 and RZ/G2 platforms: > > > > -Gen3 platforms can support both a single connected parallel input source > > +Gen3 and RZ/G2 platforms can support both a single connected parallel input source > > from external SoC pins (port@0) and/or multiple parallel input sources > > from local SoC CSI-2 receivers (port@1) depending on SoC. > > > > -- > > 2.7.4 Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
Hello Mauro, This patch has been around for some time, do you think you can take it? Thanks, Fab > From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-owner@vger.kernel.org> On Behalf Of Biju Das > Sent: 10 September 2018 15:31 > Subject: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support > > Document RZ/G2M (R8A774A1) SoC bindings. > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > index 2f42005..8c81689 100644 > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver. > - compatible: Must be one or more of the following > - "renesas,vin-r8a7743" for the R8A7743 device > - "renesas,vin-r8a7745" for the R8A7745 device > + - "renesas,vin-r8a774a1" for the R8A774A1 device > - "renesas,vin-r8a7778" for the R8A7778 device > - "renesas,vin-r8a7779" for the R8A7779 device > - "renesas,vin-r8a7790" for the R8A7790 device > @@ -58,9 +59,9 @@ The per-board settings Gen2 platforms: > - data-enable-active: polarity of CLKENB signal, see [1] for > description. Default is active high. > > -The per-board settings Gen3 platforms: > +The per-board settings Gen3 and RZ/G2 platforms: > > -Gen3 platforms can support both a single connected parallel input source > +Gen3 and RZ/G2 platforms can support both a single connected parallel input source > from external SoC pins (port@0) and/or multiple parallel input sources > from local SoC CSI-2 receivers (port@1) depending on SoC. > > -- > 2.7.4
-----Original Message----- From: Rob Herring <robh@kernel.org> Sent: 17 September 2018 06:45 To: Biju Das <biju.das@bp.renesas.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Biju Das <biju.das@bp.renesas.com>; Niklas Söderlund <niklas.soderlund@ragnatech.se>; linux-media@vger.kernel.org; linux-renesas-soc@vger.kernel.org; devicetree@vger.kernel.org; Simon Horman <horms@verge.net.au>; Geert Uytterhoeven <geert+renesas@glider.be>; Chris Paterson <Chris.Paterson2@renesas.com>; Fabrizio Castro <fabrizio.castro@bp.renesas.com> Subject: Re: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support On Mon, 10 Sep 2018 15:31:16 +0100, Biju Das wrote: > Document RZ/G2M (R8A774A1) SoC bindings. > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org> Renesas Electronics Europe GmbH,Geschaeftsfuehrer/President : Michael Hannawald, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany,Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index 2f42005..8c81689 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver. - compatible: Must be one or more of the following - "renesas,vin-r8a7743" for the R8A7743 device - "renesas,vin-r8a7745" for the R8A7745 device + - "renesas,vin-r8a774a1" for the R8A774A1 device - "renesas,vin-r8a7778" for the R8A7778 device - "renesas,vin-r8a7779" for the R8A7779 device - "renesas,vin-r8a7790" for the R8A7790 device @@ -58,9 +59,9 @@ The per-board settings Gen2 platforms: - data-enable-active: polarity of CLKENB signal, see [1] for description. Default is active high. -The per-board settings Gen3 platforms: +The per-board settings Gen3 and RZ/G2 platforms: -Gen3 platforms can support both a single connected parallel input source +Gen3 and RZ/G2 platforms can support both a single connected parallel input source from external SoC pins (port@0) and/or multiple parallel input sources from local SoC CSI-2 receivers (port@1) depending on SoC.